Geochemistry of Chixulub ejecta in ODP Leg 207 holes

An up to 2-cm thick Chicxulub ejecta deposit marking the Cretaceous-Paleogene (K-Pg) boundary (the "K-T" boundary) was recovered in six holes drilled during ODP Leg 207 (Demerara Rise, tropical western Atlantic). Stunning features of this deposit are its uniformity over an area of 30 km2 and the total absence of bioturbation, allowing documentation of the original sedimentary sequence. High-resolution mineralogical, petrological, elemental, isotopic (Sr-Nd), and rock magnetic data reveal a distinct microstratigraphy and a range of ejecta components. The deposit is normally graded and composed predominantly of rounded, 0.1- to max. 1-mm sized spherules. Spherules are altered to dioctahedral aluminous smectite, though occasionally relict Si-Al-rich hydrated glass is also present, suggesting acidic precursor lithologies. Spherule textures vary from hollow to vesicle-rich to massive; some show in situ collapse, others include distinct Fe-Mg-Ca-Ti-rich melt globules and lath-shaped Al-rich quench crystals. Both altered glass spherules and the clay matrix (Site 1259B) display strongly negative epsilon-Nd (T=65Ma) values (-17) indicating uptake of Nd from contemporaneous ocean water during alteration. Finally, Fe-Mg-rich spherules, shocked quartz and feldspar grains, few lithic clasts, as well as abundant accretionary and porous carbonate clasts are concentrated in the uppermost 0.5-0.7 mm of the deposit. The carbonate clasts display in part very unusual textures, which are interpreted to be of shock-metamorphic origin. The preservation of delicate spherule textures, normal grading with lack of evidence for traction transport, and sub-millimeter scale compositional trends provide evidence for this spherule deposit representing a primary air-fall deposit not affected by significant reworking. The ODP Leg 207 spherule deposit is the first known dual-layer K-Pg boundary in marine settings; it incorporates compositional and stratigraphic aspects of both proximal and distal marine sites. Its stratigraphy strongly resembles the dual-layer K-Pg boundary deposits in the terrestrial Western Interior of North America (although there carbonate phases are not preserved). The occurrence of a dual ejecta layer in these quite different sedimentary environments - separated by several thousands of kilometers - provides additional evidence for an original sedimentary sequence. Therefore, the layered nature of the deposit may document compositional differences between ballistic Chicxulub ejecta forming the majority of the spherule deposit, and material falling out from the vapor (ejecta) plume, which is concentrated in the uppermost part.

Measurement of electromagnetic pulses generated during interactions of high power lasers with solid targets

A target irradiated with a high power laser pulse, blows off a large amount of charge and as a consequence the target itself becomes a generator of electromagnetic pulses (EMP) owing to high return current flowing to the ground through the target holder. The first measurement of the magnetic field induced by the neutralizing current reaching a value of a few kA was performed with the use of an inductive target probe at the PALS Laser Facility (Cikhardt et al. Rev. Sci. Instrum. 85 (2014) 103507). A full description of EMP generation should contain information on the spatial distribution and temporal variation of the electromagnetic field inside and outside of the interaction chamber. For this reason, we consider the interaction chamber as a resonant cavity in which different modes of EMP oscillate for hundreds of nanoseconds, until the EMP is transmitted outside through the glass windows and EM waves are attenuated. Since the experimental determination of the electromagnetic field distribution is limited by the number of employed antennas, a mapping of the electromagnetic field has to be integrated with numerical simulations. Thus, this work reports on a detailed numerical mapping of the electromagnetic field inside the interaction chamber at the PALS Laser Facility (covering a frequency spectrum from 100 MHz to 3 GHz) using the commercial code COMSOL Multiphysics 5.2. Moreover we carried out a comparison of the EMP generated in the parallelepiped-like interaction chamber used in the Vulcan Petawatt Laser Facility at the Rutherford Appleton Laboratory, against that produced in the spherical interaction chamber of PALS.

Enhancing Quality of Life for People who are Blind or Low Vision Using Computing Technology

Thesis (Ph.D.)--University of Washington, 2016-08

Doppelgänger

Catalogue and invitation card for Exhibition at Eagle Gallery, London. 16 June – 16 July 2016 “My paintings are like ghost schema, assemblages of images and surfaces that generate spectral encounters.” James Fisher’s paintings are carefully calibrated. They explore dualities and employ complex visual palimpsests to construct images that are rich with association. Abstract and figurative motifs are laid on different layers of their surfaces, covered over, and re-discovered through sanding back the paint. As a former British School at Rome Scholar, Fisher’s early work was influenced by the study of fresco painting and he retains an approach that allows for time and chance to enter the process of painting. Fabrication – in the sense both of making things and making things up – produces enigmatic and mysterious results. Many of Fisher’s recent paintings are titled after notable, now forgotten women, or after characters from folklore and comic books. The range of subject matter allows him to conflate biography with fiction, and to borrow from a wide range of visual sources for patterned elements that formally hold in place the more fugitive suggestions of the images. Fisher’s fourth solo exhibition at the Eagle Gallery coincides with the selection of two works in this year’s Royal Academy Summer Exhibition, and his inclusion in Towards Night – a forthcoming exhibition at the Towner, Eastbourne.

Towards Night

Sixty artists explore the nocturnal. Curated by Tom Hammick. The evening hour too gives us the irresponsibility which darkness and lamplight bestow. We are no longer quite ourselves. – Virginia Woolf, Street Haunting: A London Adventure, 1930 Towards Night is an exhibition exploring the nocturnal through paintings, prints and drawings by over sixty artists. Drawing on the nineteenth century European Romantic tradition, the show surveys contemporary and historical connections to wonderment and dystopia at dusk, twilight, night and dawn. Towards Night juxtaposes key paintings and prints by Constable, Friedrich, Munch, Nolde, Palmer and Turner, some of the best known visionaries of the Romantic tradition with contemporary artists who work with the transformative aspects of nightfall to convey emotional responses of awe, anxiety and solitude, love and loss, revelry, insomnia, and journey’s end. The exhibition opens with direct and positive responses to the natural world; Marc Chagall’s exotic dreamlike evening in The Poet Reclining (1915) sits close to eighteenth century Indian miniatures depicting brightly painted figures offset against darkening monsoon clouds, and William Crozier’s Balcony at Night, Antibes (2007), of a plant, blue and iridescent against the cool night sky. As the exhibition progresses, the dystopias become darker and more disturbing, and the connections between artists and works intensify: Emma Stibbon’s Rome Aqueduct (2011) takes on a heightened sense of pathos alongside Caspar David Friedrich’s Winter Landscape (1811); Peter Doig’s cinematic Echo Lake (1998) conjures up an increased sense of contemporary angst; and Prunella Clough’s False Flower (1993), a magical tree defying brutalism by growing out of concrete, becomes more miraculous near Night Shift (2015) Nick Carrick’s tomblike high rise. Tom Hammick’s Violetta Alone (2015) and Michael Craig Martin’s Ash Tray (2015), reinforce hedonistic aspects of night-time revelry alongside Four AM, Betsy Dadd’s young woman drinking in the early hours of the morning and L.S. Lowry’s drunken people in a pub in The Crowd (1922). In the final room, a cluster of works explores dreams and insomnia, from Louise Bourgeois’ Spirals (2010) to Munch’s lovers embracing in The Kiss (1902). Tom Hammick, curator of the show said “This exhibition has grown way beyond its original conception, to become a magnificent survey of painting and printmaking from over two hundred years based around the central tenet of night. The exhibition is a kind of painterly response to the way figurative artists use their artistic heroes as starting points for their own work, both compositionally and emotionally.” Artists featured in Towards Night: Christiane Baumgarter, Michael Craig-Martin, Julian Opie, Will Gill, Merlin James, Howard Hodgkin, WillIam Scott, Patrick Caulfield, George Shaw, Stephen Chambers, Basil Beattie, Betsy Dadd, Christopher Le Brun, L.S Lowry, Andrew Cranston, David Willetts, James Fisher, Emma Stibbon, Vija Celmins, William Blake, William Crozier, Tom Hammick, Georgia Keeling, Helen Turner, Humphrey Ocean, Julian Bell, Craigie Aitchison, Mark Wright, Ken Kiff, Matthew Burrows, Andrzej Jackowski, Sarah Raphael, Nick Bodimeade, Nick Carrick, Mary Newcomb, Hurvin Anderson, Peter Doig, Phoebe Unwin, Danny Markey, Sara Lee, Simon Burton, Susie Hamilton, Marc Chagall, Alfred Wallis, Emil Nolde, J.M.W. Turner, Prunella Clough, Samuel Palmer, Louise Bourgeois, Caspar David Friedrich, Alex Katz, Ewan Gibbs, Susie Hamilton, Andrzej Jackowski, Amanda Vesey, Edward Stott, Gertrude Hermes, Rose Wylie, Sidney Nolan, John Constable, J.M.W. Turner, Emil Nolde, Hiroshige, Edvard Munch, Samuel Palmer, Eileen Cooper, Charles Neame-Spencer, Samantha Cary.

Die Feldspatgehalte quartärzeitlicher Sande Niedersachsens

The feldspar contents of 373 samples from quaternary sands of Lower Saxony (West Germany) were determined. The samples were taken in all parts of Lower Saxony and represent a selec- tion of quaternary Sediments of different age and genetic origin. 7 different methods of investigation were tested to determine the content of feldspar both qualitative and quantitative. Polarizing mioroscopy, x-ray diffractometry, Chemical analysis and staining fit these aims best. The most important results of these investigations are: - The quarternary Lower Saxonian sands have an average content of 4.4 weight-% potassium feldspars and 0.8 weight-% plagio- clase. - All tested samples have a similar qualitative feldspar compo- sition. There are monocline, tricline and - more rare - per- thitic potassium feldspars with a rather high (greater 80 %) KAlSi3O8 content. From the plagioclase feldspars only albite, oligoclase and little andesine were indicated. - The potassium feldspar content is higher in each sample than the plagioclase content. - The feldspar content depends on age and genetic origin of each sand. Generally spoken the feldspar content lessens with increasing age. Glaciofluviatile and basin sands usually have a higher feldspar content than fluvial or aeolian sands of the same age. - The feldspar content is highly influenced by grain size com- position. A minimum of feldspar content lies between 0.4 and 1 .0 mm grain size. Fine sands usually have a higher feldspar content than coarse sands. The reason for this phenomenon is weathering. - There are no regional differences in the amount of feldspar content. - The feldspar content is not high enough for commercial mining.

Hybrid materials for biomedical applications

The increased longevity of humans and the demand for a better quality of life have led to a continuous search for new implant materials. Scientific development coupled with a growing multidisciplinarity between materials science and life sciences has given rise to new approaches such as regenerative medicine and tissue engineering. The search for a material with mechanical properties close to those of human bone produced a new family of hybrid materials that take advantage of the synergy between inorganic silica (SiO4) domains, based on sol-gel bioactive glass compositions, and organic polydimethylsiloxane, PDMS ((CH3)2.SiO2)n, domains. Several studies have shown that hybrid materials based on the system PDMS-SiO2 constitute a promising group of biomaterials with several potential applications from bone tissue regeneration to brain tissue recovery, passing by bioactive coatings and drug delivery systems. The objective of the present work was to prepare hybrid materials for biomedical applications based on the PDMS-SiO2 system and to achieve a better understanding of the relationship among the sol-gel processing conditions, the chemical structures, the microstructure and the macroscopic properties. For that, different characterization techniques were used: Fourier transform infrared spectrometry, liquid and solid state nuclear magnetic resonance techniques, X-ray diffraction, small-angle X-ray scattering, smallangle neutron scattering, surface area analysis by Brunauer–Emmett–Teller method, scanning electron microscopy and transmission electron microscopy. Surface roughness and wettability were analyzed by 3D optical profilometry and by contact angle measurements respectively. Bioactivity was evaluated in vitro by immersion of the materials in Kokubos’s simulated body fluid and posterior surface analysis by different techniques as well as supernatant liquid analysis by inductively coupled plasma spectroscopy. Biocompatibility was assessed using MG63 osteoblastic cells. PDMS-SiO2-CaO materials were first prepared using nitrate as a calcium source. To avoid the presence of nitrate residues in the final product due to its potential toxicity, a heat-treatment step (above 400 °C) is required. In order to enhance the thermal stability of the materials subjected to high temperatures titanium was added to the hybrid system, and a material containing calcium, with no traces of nitrate and the preservation of a significant amount of methyl groups was successfully obtained. The difficulty in eliminating all nitrates from bulk PDMS-SiO2-CaO samples obtained by sol-gel synthesis and subsequent heat-treatment created a new goal which was the search for alternative sources of calcium. New calcium sources were evaluated in order to substitute the nitrate and calcium acetate was chosen due to its good solubility in water. Preparation solgel protocols were tested and homogeneous monolithic samples were obtained. Besides their ability to improve the bioactivity, titanium and zirconium influence the structural and microstructural features of the SiO2-TiO2 and SiO2-ZrO2 binary systems, and also of the PDMS-TiO2 and PDMS-ZrO2 systems. Detailed studies with different sol-gel conditions allowed the understanding of the roles of titanium and zirconium as additives in the PDMS-SiO2 system. It was concluded that titanium and zirconium influence the kinetics of the sol-gel process due to their different alkoxide reactivity leading to hybrid xerogels with dissimilar characteristics and morphologies. Titanium isopropoxide, less reactive than zirconium propoxide, was chosen as source of titanium, used as an additive to the system PDMS-SiO2-CaO. Two different sol-gel preparation routes were followed, using the same base composition and calcium acetate as calcium source. Different microstructures with high hydrophobicit were obtained and both proved to be biocompatible after tested with MG63 osteoblastic cells. Finally, the role of strontium (typically known in bioglasses to promote bone formation and reduce bone resorption) was studied in the PDMS-SiO2-CaOTiO2 hybrid system. A biocompatible material, tested with MG63 osteoblastic cells, was obtained with the ability to release strontium within the values reported as suitable for bone tissue regeneration.

L'orientation et la propriété de mémoire de forme des polymères cristallins liquides à chaînes latérales covalents et supramoléculaires

In many studies of the side-chain liquid crystalline polymers (SCLCPs) bearing azobenzene mesogens as pendant groups, obtaining the orientation of azobenzene mesogens at a macroscopic scale as well as its control is important, because it impacts many properties related to the cooperative motion characteristic of liquid crystals and the trans-cis photoisomerization of the azobenzene molecules. Various means can be used to align the mesogens in the polymers, including rubbed surface, mechanical stretching or shearing, and electric or magnetic field. In the case of azobenzene-containing SCLCPs, another method consists in using linearly polarized light (LPL) to induce orientation of azobenzene mesogens perpendicular to the polarization direction of the excitation light, and such photoinduced orientation has been the subject of numerous studies. In the first study realized in this thesis (Chapter 1), we carried out the first systematic investigation on the interplay of the mechanically and optically induced orientation of azobenzene mesogens as well as the effect of thermal annealing in a SCLCP and a diblock copolymer comprising two SCLCPs bearing azobenzene and biphenyl mesogens, respectively. Using a supporting-film approach previously developed by our group, a given polymer film can be first stretched in either the nematic or smectic phase to yield orientation of azobenzene mesogens either parallel or perpendicular to the strain direction, then exposed to unpolarized UV light to erase the mechanically induced orientation upon the trans–cis isomerization, followed by linearly polarized visible light for photoinduced reorientation as a result of the cis–trans backisomerization, and finally heated to different LC phases for thermal annealing. Using infrared dichroism to monitor the change in orientation degree, the results of this study have unveiled complex and different orientational behavior and coupling effects for the homopolymer of poly{6-[4-(4-methoxyphenylazo)phenoxy]hexyl methacrylate} (PAzMA) and the diblock copolymer of PAzMA-block- poly{6-[4-(4-cyanophenyl) phenoxy]hexyl methacrylate} (PAzMA-PBiPh). Most notably for the homopolymer, the stretching-induced orientation exerts no memory effect on the photoinduced reorientation, the direction of which is determined by the polarization of the visible light regardless of the mechanically induced orientation direction in the stretched film. Moreover, subsequent thermal annealing in the nematic phase leads to parallel orientation independently of the initial mechanically or photoinduced orientation direction. By contrast, the diblock copolymer displays a strong orientation memory effect. Regardless of the condition used, either for photoinduced reorientation or thermal annealing in the liquid crystalline phase, only the initial stretching-induced perpendicular orientation of azobenzene mesogens can be recovered. The reported findings provide new insight into the different orientation mechanisms, and help understand the important issue of orientation induction and control in azobenzene-containing SCLCPs. The second study presented in this thesis (Chapter 2) deals with supramolecular side-chain liquid crystalline polymers (S-SCLCPs), in which side-group mesogens are linked to the chain backbone through non-covalent interactions such as hydrogen bonding. Little is known about the mechanically induced orientation of mesogens in S-SCLCPs. In contrast to covalent SCLCPs, free-standing, solution-cast thin films of a S-SCLCP, built up with 4-(4’-heptylphenyl) azophenol (7PAP) H-bonded to poly(4-vinyl pyridine) (P4VP), display excellent stretchability. Taking advantage of this finding, we investigated the stretching-induced orientation and the viscoelastic behavior of this S-SCLCP, and the results revealed major differences between supramolecular and covalent SCLCPs. For covalent SCLCPs, the strong coupling between chain backbone and side-group mesogens means that the two constituents can mutually influence each other; the lack of chain entanglements is a manifestation of this coupling effect, which accounts for the difficulty in obtaining freestanding and mechanically stretchable films. Upon elongation of a covalent SCLCP film cast on a supporting film, the mechanical force acts on the coupled polymer backbone and mesogenic side groups, and the latter orients cooperatively and efficiently (high orientation degree), which, in turn, imposes an anisotropic conformation of the chain backbone (low orientation degree). In the case of the S-SCLCP of P4VP-7PAP, the coupling between the side-group mesogens and the chain backbone is much weakened owing to the dynamic dissociation/association of the H-bonds linking the two constituents. The consequence of this decoupling is readily observable from the viscoelastic behavior. The average molecular weight between entanglements is basically unchanged in both the smectic and isotropic phase, and is similar to non-liquid crystalline samples. As a result, the S-SCLCP can easily form freestanding and stretchable films. Furthermore, the stretching induced orientation behavior of P4VP-7PAP is totally different. Stretching in the smectic phase results in a very low degree of orientation of the side-group mesogens even at a large strain (500%), while the orientation of the main chain backbone develops steadily with increasing the strain, much the same way as amorphous polymers. The results imply that upon stretching, the mechanical force is mostly coupled to the polymer backbone and leads to its orientation, while the main chain orientation exerts little effect on orienting the H-bonded mesogenic side groups. This surprising finding is explained by the likelihood that during stretching in the smectic phase (at relatively higher temperatures) the dynamic dissociation of the H-bonds allow the side-group mesogens to be decoupled from the chain backbone and relax quickly. In the third project (Chapter 3), we investigated the shape memory properties of a S-SCLCP prepared by tethering two azobenzene mesogens, namely, 7PAP and 4-(4'-ethoxyphenyl) azophenol (2OPAP), to P4VP through H-bonding. The results revealed that, despite the dynamic nature of the linking H-bonds, the supramolecular SCLCP behaves similarly to covalent SCLCP by exhibiting a two-stage thermally triggered shape recovery process governed by both the glass transition and the LC-isotropic phase transition. The ability for the supramolecular SCLCP to store part of the strain energy above T[subscript g] in the LC phase enables the triple-shape memory property. Moreover, thanks to the azobenzene mesogens used, which can undergo trans-cis photoisomerization, exposure the supramolecular SCLCP to UV light can also trigger the shape recovery process, thus enabling the remote activation and the spatiotemporal control of the shape memory. By measuring the generated contractile force and its removal upon turning on and off the UV light, respectively, on an elongated film under constant strain, it seems that the optically triggered shape recovery stems from a combination of a photothermal effect and an effect of photoplasticization or of an order-disorder phase transition resulting from the trans-cis photoisomerization of azobenzene mesogens.

La pintura que no se deja ver. La pintura avergonzada, la pintura escondida (a propósito de los escritos de Ángela de La Cruz, Georges didi-Huberman y Honoré de Balzac)

El artículo «La pintura que no se deja ver: la pintura avergonzada, la pintura escondida» relaciona una de las primeras obras de la artista Ángela de la Cruz ashamed (1995), con La pintura encarnada (1984) de Georges Didi-Huberman, ensayo que a su vez analiza La obra maestra desconocida (1837) de Honoré de Balzac. Entre Ángela de la Cruz, didi-Huberman y Balzac se establece un triángulo en torno al concepto cuadro-cuerpo. A través de una pintura, un ensayo filosófico y un relato, tres autores de tres tiempos distintos recuperan las mismas ideas de carne y piel pictórica y cuadro humanizado. Su objetivo: superar las barreras de representación en la pintura para crear un ser más allá del objeto pictórico. Sin embargo, cuanto más idealizan la pintura y más pretenden superar la pantallapictórica, más se desvanece el concepto de «cuadro»; cuanto más acercan el cuadro a ser, más se aleja de ser un cuadro y menos se permite el acceso a lo que representa. La persecución del ideal implica que el cuadro se vea sometido a su ocultación, al deterioro y a la destrucción de su imagen.

Obrazy muzyki w twórczości Janiny Kraupe-Świderskiej

Filologii Polskiej i Klasycznej: Zakład Dydaktyki Literatury i Języka Polskiego

Quitosana imobilizada em suporte inerte para a adsorção de corantes alimentícios em coluna de leito fixo

O uso de corantes sintéticos na indústria de alimentos tem provocado transtornos à saúde humana e ao meio ambiente. A quitosana pode ser imobilizada em matrizes sólidas e aplicada na remoção de corantes em coluna de leito fixo. A análise da dinâmica de uma coluna de leito fixo é baseada na curva de ruptura, esta é dependente da geometria da coluna, das condições operacionais e dos dados de equilíbrio. Neste contexto, o objetivo deste trabalho foi estudar o recobrimento de esferas de vidro por quitosana e sua aplicação como adsorvente de corantes em coluna de leito fixo. No estudo do recobrimento avaliaram-se os efeitos da concentração de quitosana e dos métodos de cura. As esferas recobertas foram aplicadas em ensaios de adsorção estático e dinâmico. Inicialmente, avaliou-se o equilíbrio de adsorção através da construção de isotermas e ajuste de modelos, e após, avaliaram-se os efeitos do tipo de cura e do grau de desacetilação da quitosana. Em seguida, foram analisados os efeitos do tipo de corante e do pH, e o comportamento cinético da adsorção pela construção de curvas de ruptura e ajuste de modelos dinâmicos. A influência da altura do leito e da concentração inicial de corante sobre os parâmetros da adsorção em leito fixo foram analisados através da metodologia de superfície de resposta (MSR). Ao final, estudou-se a regeneração da coluna. Os resultados mostraram que os maiores percentuais de recobrimento foram obtidos pelos métodos físico e físico/químico, na concentração de quitosana de 0,5% (m/v). Nestas condições o percentual de recobrimento foi de 46%. Nas imagens da superfície das esferas (MEV) observou-se que as mesmas foram recobertas de forma homogênea pela quitosana. As isotermas de equilíbrio obtidas foram classificadas como do tipo V, sendo o modelo de Sips o mais adequado para representar os dados experimentais. As capacidades máximas de adsorção foram 337 mg g-1, 286 mg g-1 e 200 mg g-1 para os corantes amarelo tartrazina, amarelo crepúsculo e vermelho 40, respectivamente. A aplicação das esferas recobertas com quitosana em leito fixo mostrou-se mais adequada utilizando o método de cura físico/químico e quitosana com grau de desacetilação de 85%. A máxima capacidade de adsorção da coluna em função do corante e do pH variou de 13 a 108 mg g–1. Os modelos BDST (bed–depth–service–time), Thomas e Yoon–Nelson foram adequados para representar os dados experimentais. De acordo com a MSR, o melhor desempenho do leito foi com altura de 30 cm e concentração inicial de corante de 50 mg L-1. Nestas condições, obteve-se tempo de ruptura de 88 min, máxima capacidade da coluna de 108 mg g-1 e remoção de 86 %. Na regeneração da coluna observou-se que cerca de 75% da capacidade máxima da coluna foi mantida após cinco ciclos de adsorção–eluição. Diante do exposto, a coluna de leito fixo empacotada com esferas recobertas com quitosana mostrou-se promissora na remoção de corantes de soluções aquosas.

Desenvolvimento de uma célula a combustível de glicerol direto em meio alcalino

Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Química, 2015.

Desenvolvimento de uma célula a combustível de glicerol direto em meio alcalino

Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Química, 2015.

Current status of malaria parasite among blood donors in Port Harcourt, Rivers State, Nigeria

This study was carried out to determine the prevalence of malaria parasite among blood donors at the Police Clinic Port Harcourt, Rivers State, Nigeria. The standard parasitological techniques using both thick and thin blood films from the donors for the detection of malaria parasite was followed. Venous blood was collected from 200 blood donors and films were made on clean greese-free glass slide and stained with 10%Giemsa stains and viewed under the microscope using the oil immersion objective. Of the 200 samples examined, 56 (28.00%) were positive with Plasmodium falciparium . The highest prevalence among the males 53(26.50%) and between the ages 21-30years and only 3 (1.50%) of females were positive. Donors having the blood group O were more infected (60.70%) than the other blood groups and the lowest was blood group AB (5.40%). This result shows that there is a relatively high prevalence of malaria parasite among the blood donors in Port Harcourt, Nigeria. It is, therefore, recommended that malaria parasite screening test be included among other blood screening tests before any transfusion to avert the deleterious effects of malaria on recipients.

Estudo da adesão de pinos endodônticos modificados superficialmente por plasma de oxigênio

The work presents the effect of plasma treatment when applied in fibers or carbon/glass posts in the adhesion fiber/resin and posts/cement. This has for objective the modification of the surface of the fibers, as well as the wettability of the posts, seeking the improvement of the adhesion and of the connection fiber/resin in the processing of polymeric composites reinforced with the same ones. 120 posts (Reforpost) were used and 30 meters of fibers of carbon and of glass (Fibrex), of the company Angelus. The samples were divided in three groups of 40 specimens: GROUP I - 20 posts of glass fiber and 20 of carbon without treatment to it shapes, GROUP II -20 posts of glass fiber and 20 of carbon treated to it shapes in the surface and GROUP III - 20 posts of glass fiber and 20 of carbon make with fibers in natura after plasma treatment. The plasma treatment was accomplished with oxygen and with temperature in the camera fixed at 200°C, for one hour of exhibition. The posts and the fibers were characterized before and after the treatment. The wettability was measure by pendent drop method, and interface fiber/resin and posts/cement were observed by optical and electronic microscopy. It was observed that both wettability and texture were increased with plasma treatment