Simultaneous removal of ammonia and phosphate from wastewater by precipitation of struvite using magnesia

A thorough investigation of conditions required for the precipitation of magnesium ammonium phosphate hexahydrate using magnesia as the source of magnesium was carried out and two computer models were used to make predictions as to optimum conditions for production of suitable crystal size and structure for a successful process. A process was developed and a bench scale model operated for a number of high ammonia wastes. Removal of ammonia was affected to levels of up to 97% with 94% ammonia removal being achievable consistently.

Visualisation of chemical processes during corrosion of zinc using magnetic resonance imaging

Compositional and structural changes within an electrolyte solution above an electrochemically active metal surface have been visualised using magnetic resonance imaging (MRI) for the first time. In these proof-of-concept experiments, zinc metal was galvanically corroded in a saturated lithium chloride solution. Magnetic resonance relaxation maps were taken during the corrosion process and spatial variations in both T₁ and T₂ relaxation times were observed to change with time. These changes were attributed to changes in the speciation of zinc ions in the electrolyte.

Field test study on the shear behaviour of stressed skin diaphragm spanning several purlins

Although profiled steel sheets have the diaphragm effect in steel structure, since there is no specific code to follow in China, it is only used as the reservation of the structural stiffness.So it results in economic wastes.In order to investigate the contribution of stressed skin to the overall stiffness, field tests are carried out to measure the lateral stiffness of the frames with and without stressed skin diaphgram.Based on the superposition principle and using the curve fitting method, the test results are quantified.The shear rigidity of stressed skin diaphgram spanning several purlins is gained indirectly.It shows that the shear rigidity of the diaphragm between two frames is even close to the lateral stiffness of one frame.

Fermentative production of rhamnosidase from Staphylococcus xylosus MAK 2 in a bioreactor for bio-energy generation

Increasing concern about the environment, food and feed shortages and hike in the price of petroleum have stimulated interest in new ways of producing biofuels. The interest is rapidly increasing towards converting agricultural wastes to commercially valuable products. Biofuels made from waste biomass can offer immediate and sustained greenhouse gas advantages. In this direction, we are focusing on Citrus processing waste, a byproduct of juice manufacture, which contains high amount of flavonoids and polysaccharides. There is a considerable industrial interest in the enzymatic transformation of flavonoids to hydrolysis products; that offers a pathway to bio-energy generation. Rhamnosidase of bacterial origin are very few and thus are potentially subject for research.

Staphylococcus xylosus, Gram positive cocci, a nonpathogenic member of CNS family, isolated from soil was used to produce α-L-rhamnosidase. This new strain, so far unknown for the production of α-L-Rhamnosidase, was identified and characterized as Staphyloccocus sp. through biochemical tests and 16S DNA sequence analysis. Effect of various medium and process parameters like pH, temperature, aeration and agitation rates and inducer concentration were studied. Further, the enzyme activity was enhanced by adding the inducer and divalent metal ion to the optimised fermentation medium. We have recovered important sugars “rhamnose” and “galacturonic acid” from the processed waste which would be utilized for ethanol production. This presentation will summarize current efforts to develop an enzymatic treatment which would facilitate the economical processing of citrus waste for bioenergy generation.

Industrial wastewater minimization

Industrial pollution emitted to the environment has created a drastic damage to the environment. Natural purification processes such as dilution and dispersion are not applicable due to the enormous amounts of discharged wastes, as they exceed the assimilative capacity of the local environment. Concern about the environment by the general public has forced governments to establish effluent standards for industrial wastes and emissions. Increasing numbers of industries each year has exerted pressure on the environment compelling regulators to further tighten the standards. This has led to modification and improvement in the existing end-of-pipe treatment facilities resulting in higher investment as well as operation and maintenance cost, whereas in recent years, implementation of proactive methods of waste minimization is gaining much attention within industrial sectors. Various waste minimization techniques such as improved housekeeping, change in process technology, change in product, change in input materials, recycling of chemical and raw materials, and recovery of byproducts are discussed in detail. A number of successful examples discussed in this paper indicate that substantial benefits can be gained by implementing waste minimization programs.

A case study on waste auditing in an ice cream factory

The management of the ice cream factory concerned in this study strongly felt the importance of undertaking a waste audit of its biggest waste generator, the ice cream plant. Ice cream wastewater constitutes as much as 74% of the total volume of wastewater discharged by the company to the central treatment plant of the Industrial Estate in which the factory is situated. Generation of ice cream wastes is attributed to the high consumptive use of water in the plant for washing and cleaning operations. As a result of waste auditing, methods were proposed to save water and to segregate the waste, and to modify the existing wastewater treatment system of the ice cream plant for better treatment efficiency.

An approach for removing redundant data from RFID data streams

Radio frequency identification (RFID) systems are emerging as the primary object identification mechanism, especially in supply chain management. However, RFID naturally generates a large amount of duplicate readings. Removing these duplicates from the RFID data stream is paramount as it does not contribute new information to the system and wastes system resources. Existing approaches to deal with this problem cannot fulfill the real time demands to process the massive RFID data stream. We propose a data filtering approach that efficiently detects and removes duplicate readings from RFID data streams. Experimental results show that the proposed approach offers a significant improvement as compared to the existing approaches.

A novel electrochemical method for monitoring corrosion under insulation

Purpose - The objective of this work was to develop practical experimental techniques for monitoring corrosion in "difficult-to-test" conditions such as corrosion under insulation (CUI).

Design/methodology/approach - An electrochemically integrated multi-electrode array namely the wire beam electrode (WBE) method has been used in combination with noise signature analysis for the first time to monitor the penetration of corrosive species under simulated corrosion-under-insulation conditions. Corrosion of aluminium exposed under insulation materials such as rock wool, glass wool, cotton wool and tissue paper has been successfully monitored.

Findings - A typical potential noise signature of a major potential jump from AA1100 WBE was observed which corresponded to the corrosive species reaching the WBE surface in WBE current distribution map. A good correlation between the galvanic current maps and the corroded surface was also observed.

Originality/value - The preliminary results suggest that the proposed novel electrochemical method is capable of monitoring CUI.

Comparative study of ni effect on the corrosion behavior of low alloy steels in FGD and acid rain environments

The alloying effect of a small amount of nickel on low alloy steel for application to flue gas desulfurization(FGD) systems was studied. The structural characteristics of the rust layer were investigated by scanning electron microscopy(SEM). The electrochemical properties were examined by means of potentiostatic polarization test, potentiodynamic polarization test, and electrochemical impedance spectroscopy(EIS) in a modified green death solution of 16.9 vol.% H2SO4+0.35 vol.% HC1 at 60°C and an acid rain solution of 6.25 X 10-5 M H2S04+5.5 X 10-3 M NaCl at room temperature. It was found that as the amount of nickel increased, the corrosion rate increased in the modified green death solution, which seemed to result from micro-galvanic corrosion between NiS and alloy matrix. In acid rain solution, the corrosion rate decreased as the amount of nickel increased due to the repulsive force of NiFe204 rust against Cl-ions by electronegativity.

A novel sensing technique for monitoring pitting corrosion of stainless steel type 316L

A novel electrochemically integrated multi-electrode array namely the wire beam electrode(WBE) in combination with noise signatures analysis has been designed to monitor pittingcorrosion of one of the best corrosion resistance ferrous alloys, stainless steel type 316L.From the direct correlation of electrochemical potential noise signatures and galvanic currentdistribution maps during pitting corrosion processes, two characteristic noise patterns wereobserved prior to stable pit formation: (i) the characteristic ‘peak’ of rapid potential transient,towards less negative direction, followed by recovery (termed noise signature I) was found tocorrelate with the disappearance of unstable anode; (ii) the characteristic noise pattern ofquick potential changes towards less negative direction followed by no recovery (termed noisesignature II) was found to correspond with the massive disappearance of minor anodes leadingto formation of highly localized major anodes in the galvanic current distribution maps.

An auto-switch for multisampling of a wire beam electrode corrosion monitoring system

An auto-switch device has been designed, constructed, and tested for multisensor corrosion measurements. The auto-switch is able to connect/disconnect the selected wire beam electrode and/or electrode pairs under computer control. A computer controlled analog switch-array consisting of 100 inputs has been used as an essential part of the switch bank. The switch-bank is an essential component of a corrosion-monitoring instrument that is expected to find wide application in industry. The performance of the switch-bank is discussed and its effect on the signals is illustrated.

Recovering the hidden through found-footage films

In the early nineteen seventies materialist experimental film was cogently rejected by feminist theorists for its inability to deliver a feminist counter-cinema addressing its political agenda. The concomitant development of feminist psychoanalytic readings of “dominant cinema” against its grain also discounted such work. This split is marked by Peter Wollen’s formulation of “two avant-gardes”, one narrative and explicit about its political position and the other non-narrative and focusing directly on implicit perceptual processes. Materialist film’s fixation on structure jettisoned content, and extended post-war painting’s essentialist move to pure abstraction manifest in abstract expressionism and minimalism. The emergence of trauma theory and the recent explosion of moving image digital media with its non-linear bias and the complex layering of “technical images” have created a new situation opening up alternate readings of such discounted materialist practices. As well as a historic precursor for digital media, it is suggested that a materialist cinema, represented here by the found footage films: Alone: Life Wastes Andy Hardy (Arnold 1998) and Dreamwork (Tscherkassky 2001), signposts a belated return for materialist film within the context of trauma studies. This materialist turn rescues such experimental film from its traumatic excision and extends an understanding of what has been termed a “trauma cinema” by Janet Walker. Rather than pure, abstract or visionary such practice is read here through trauma theory as performing implicit mechanisms of denial and erasure.

Quantifying the efficiency and understanding the mechanism of localised corrosion inhibition using the wire beam electrode

Parameters extracted from the wire beam electrode (WBE) galvanic current maps have been used in conjunction with electrochemical noise patterns to directly quantify the degree of localised corrosion inhibition provided by inhibitors and to understand the mechanism of localised corrosion inhibition. The behaviour of two traditional localised corrosion inhibitors has been assessed by their effects on the maximum anodic current density (imax), total anodic current density (itot), the number of anodic sites (Na) and the localised corrosion intensity index (LCII). Typical experiments are presented to illustrate the application of these parameters in providing useful information on the efficiency and mechanism of localised corrosion inhibition.

A preliminary investigation of adult defence style and physiological reactivity to infant distress signals

Species whose offspring require extended care-giving ought to be predisposed to being biologically responsive to their infant's signalling. This paper examined the interplay between biological and psychological aspects of adult response to an infant's distress. HR (heart rate) and GSR (galvanic skin response) were recorded continuously, while 50 adults listened to white noise and an infant cry audio recording. Participants completed the defence style questionnaire and the state trait anxiety inventory. HR acceleration occurred in response to the control sound, while HR decelerated in response to the infant cry. GSR responsiveness was positively correlated with immature and neurotic defence styles. When controlling for other variables, immature defence was a unique and independent predictor of GSR change in response to infant distress. Defence demonstrated a stronger relationship than self-reported anxiety, than that with physiological responsiveness. Employing defence mechanisms appears to reduce an individual's perceived anxiety, though it has little effect on physiological arousal levels.

Inhibiting localized corrosion of aluminum and aluminum alloy by rare earth metal compounds : behaviors and characteristics observed using an electrochemically integrated multi-electrode array

An electrochemically integrated multi-electrode array namely the wire beam electrode (WBE) has been used to characterize the behavior of cerium chloride (CeCl3) and lanthanum chloride (LaCl3) in inhibiting localized corrosion of AA2024-T3 and AA1100. CeCl3 has been found to inhibit AA2024-T3 corrosion in 0.005 M sodium chloride (NaCl) solution by suppressing galvanic corrosion activities and by creating a large number of insignificant anodes. It has also been shown to inhibit localized corrosion of AA1100 in 0.5 M NaCl solution by promoting the random distribution of minor anodes. LaCl3 has been found to inhibit localized corrosion of AA2024-T3 at 1000 ppm, although its efficiency dropped significantly when its concentration decreased to 500 ppm. The addition of CeCl3 and LaCl3 to corrosion testing cells at later stages was unable to effectively suppress existing corrosion anodes.