Supporting co-operative work in apron control and resource management offices on airports

A high demand exists to increase the efficiency of present airport ground facilities and the co-ordination of traffic and services. The Traffic Office plays a crucial role in managing the airport. The main tasks of the Traffic Office is management of equipment, services, and ressources based on the flight schedule and resolving conflicts arising from deviations from the schedule. A new tool will support information exchange between Traffic Office and other facilities on the airport.

Design and Control of an Anthropomorphic Robotic Finger with Multi-point Tactile Sensation

The goal of this research is to develop the prototype of a tactile sensing platform for anthropomorphic manipulation research. We investigate this problem through the fabrication and simple control of a planar 2-DOF robotic finger inspired by anatomic consistency, self-containment, and adaptability. The robot is equipped with a tactile sensor array based on optical transducer technology whereby localized changes in light intensity within an illuminated foam substrate correspond to the distribution and magnitude of forces applied to the sensor surface plane. The integration of tactile perception is a key component in realizing robotic systems which organically interact with the world. Such natural behavior is characterized by compliant performance that can initiate internal, and respond to external, force application in a dynamic environment. However, most of the current manipulators that support some form of haptic feedback either solely derive proprioceptive sensation or only limit tactile sensors to the mechanical fingertips. These constraints are due to the technological challenges involved in high resolution, multi-point tactile perception. In this work, however, we take the opposite approach, emphasizing the role of full-finger tactile feedback in the refinement of manual capabilities. To this end, we propose and implement a control framework for sensorimotor coordination analogous to infant-level grasping and fixturing reflexes. This thesis details the mechanisms used to achieve these sensory, actuation, and control objectives, along with the design philosophies and biological influences behind them. The results of behavioral experiments with a simple tactilely-modulated control scheme are also described. The hope is to integrate the modular finger into an %engineered analog of the human hand with a complete haptic system.

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.

Collaboration between infection control and occupational health in three continents: a success story with international impact

Globalization has been accompanied by the rapid spread of infectious diseases, and further strain on working conditions for health workers globally. Post-SARS, Canadian occupational health and infection control researchers got together to study how to better protect health workers, and found that training was indeed perceived as key to a positive safety culture. This led to developing information and communication technology (ICT) tools. The research conducted also showed the need for better workplace inspections, so a workplace audit tool was also developed to supplement worker questionnaires and the ICT. When invited to join Ecuadorean colleagues to promote occupational health and infection control, these tools were collectively adapted and improved, including face-to-face as well as on-line problem-based learning scenarios. The South African government then invited the team to work with local colleagues to improve occupational health and infection control, resulting in an improved web-based health information system to track incidents, exposures, and occupational injury and diseases. As the H1N1 pandemic struck, the online infection control course was adapted and translated into Spanish, as was a novel skill-building learning tool that permits health workers to practice selecting personal protective equipment. This tool was originally developed in collaboration with the countries from the Caribbean region and the Pan American Health Organization (PAHO). Research from these experiences led to strengthened focus on building capacity of health and safety committees, and new modules are thus being created, informed by that work. The products developed have been widely heralded as innovative and interactive, leading to their inclusion into “toolkits” used internationally. The tools used in Canada were substantially improved from the collaborative adaptation process for South and Central America and South Africa. This international collaboration between occupational health and infection control researchers led to the improvement of the research framework and development of tools, guidelines and information systems. Furthermore, the research and knowledge-transfer experience highlighted the value of partnership amongst Northern and Southern researchers in terms of sharing resources, experiences and knowledge.

The control of root-knot nematodes (Meloidogyne spp.) by Pseudomonas oryzihabitans and its immunological detection on tomato roots

Pseudomonas oryzihabitans, a bacterium associated with the entomopathogenic nematode Steinernema abbasi, was evaluated for its potential to colonise roots and thereby control a field population of root-knot nematodes. Immunological techniques were developed to detect root colonisation of P. oryzihabitans on tomato roots using a specific polyclonal antibody raised against vegetative bacterial cells. In vitro, bacterial cell filtrates were also shown significantly to inhibit juveniles hatching. In a glasshouse pot experiment, there were 22 and 82% fewer females in roots of plants treated with suspensions containing 10(3) and 10(6) cells ml(-1) of P oryzihabitans, respectively. In addition, there were significantly fewer egg masses produced; however, the numbers of eggs per egg mass did not differ significantly. The relationship between root colonisation and nematode control is discussed.

Integrable Hamiltonian systems defined on the Lie groups SO(3) and SU(2): an application to the attitude control of a spacecraft

This paper considers left-invariant control systems defined on the Lie groups SU(2) and SO(3). Such systems have a number of applications in both classical and quantum control problems. The purpose of this paper is two-fold. Firstly, the optimal control problem for a system varying on these Lie Groups, with cost that is quadratic in control is lifted to their Hamiltonian vector fields through the Maximum principle of optimal control and explicitly solved. Secondly, the control systems are integrated down to the level of the group to give the solutions for the optimal paths corresponding to the optimal controls. In addition it is shown here that integrating these equations on the Lie algebra su(2) gives simpler solutions than when these are integrated on the Lie algebra so(3).

Relationship between deadbeat and pole-placement discrete-time PID controllers

This paper considers PID control in terms of its implementation by means of an ARMA plant model. Two controller actions are considered, namely pole placement and deadbeat, both being applied via a PID structure for the adaptive real-time control of an industrial level system. As well as looking at two controller types separately, a comparison is made between the forms and it is shown how, under certain circumstances, the two forms can be seen to be identical. It is shown how the pole-placement PID form does not in fact realise an action which is equivalent to the deadbeat controller, when all closed-loop poles are chosen to be at the origin of the z-plane.

Integrating predictive control and economic optimisation

In most commercially available predictive control packages, there is a separation between economic optimisation and predictive control, although both algorithms may be part of the same software system. This method is compared in this article with two alternative approaches where the economic objectives are directly included in the predictive control algorithm. Simulations are carried out using the Tennessee Eastman process model.

Development and application of a novel algorithm for steady-state optimising control using dynamic information

A novel optimising controller is designed that leads a slow process from a sub-optimal operational condition to the steady-state optimum in a continuous way based on dynamic information. Using standard results from optimisation theory and discrete optimal control, the solution of a steady-state optimisation problem is achieved by solving a receding-horizon optimal control problem which uses derivative and state information from the plant via a shadow model and a state-space identifier. The paper analyzes the steady-state optimality of the procedure, develops algorithms with and without control rate constraints and applies the procedure to a high fidelity simulation study of a distillation column optimisation.

Theorizing Literacy, Politics and Social Process: revisiting Maktab literacy in Rian in search of a paradigm

Literacy as a social practice is integrally linked with social, economic and political institutions and processes. As such, it has a material base which is fundamentally constituted in power relations. Literacy is therefore interwoven with the text and context of everyday living in which multi-levelled meanings are organically produced at both individual and societal level. This paper argues that if language thus mediates social reality, then it follows that literacy defined as a social practice cannot really be addressed as a reified, neutral activity but that it should take account of the social, cultural and political processes in which literacy practices are embedded. Drawing on the work of key writers within the field, the paper foregrounds the primary role of the state in defining the forms and levels of literacy required and made available at particular moments within society. In a case-study of the social construction of literacy meanings in pre-revolutionary Iran, it explores the view that the discourse about societal literacy levels has historically constituted a key terrain in which the struggle for control over meaning has taken place. This struggle, it is argued, sets the interests of the state to maintain ideological and political control over the production of knowledge within the culture and society over and against the needs identified by the individual for personal development, empowerment and liberation. In an overall sense, the paper examines existing theoretical perspectives on societal literacy programmes in terms of the scope that they provide for analyses that encompass the multi-levelled power relations that shape and influence dominant discourses on the relative value of literacy for both the individual and society

Food-system quality control and stage of distribution

This article models the interactions between safety and quality control and stage of distribution in the food marketing complex

Conceptualising public-private partnerships: a critical appraisal of approaches to meanings and forms

Purpose – The purpose of this article is to survey various meanings attached to a public-private partnership (PPP) and related aspects in Western literature, and identify commonalities and differences between them. Additionally, the article intends to critically assess conflicting and overlapping views on contractual and institutional PPPs, their forms and models, and draw insights for transitional economies. Design/methodology/approach – The article contrasts and compares views on PPP meanings, forms and models within Western PPP literature, and also draws comparisons with understanding of partnership aspects in the Russian language sources. The article examines theories underpinning PPPs, builds connections to PPP advantages and drawbacks, and provides critical assessment of net benefits that PPPs may bring along to the society. Findings – The article concludes that future PPP research in transitional countries such as Kazakhstan and Russia, particularly in the area of organisational and power arrangements in partnerships, may delineate new concepts such as government as a guarantor of a PPP project, social significance of a PPP project, and risk management in a country's contextual environment. Practical implications – In transitional countries, in which PPPs are in their infancy, clarification of theoretical positions, and identification of commonalities and differences between meanings attached to the PPP terminology may enable better decisions by researchers and practitioners in their selection and further development of partnerships and related concepts. Originality/value – Research in the field of PPPs in transitional countries such as Russia and Kazakhstan is in its infancy. The paper intends to contribute to the body of knowledge about PPPs by providing detailed account and categorisation of their principal meanings, forms, models, underpinning theories, and drawing insights for future research in transitional countries.

Temporal and spatial variability of auroral forms in the 10–14 MLT sector: Relationship to plasma convection and solar wind-magnetosphere coupling

Ground-based observations of dayside auroral forms and magnetic perturbations in the arctic sectors of Svalbard and Greenland, in combination with the high-resolution measurements of ionospheric ion drift and temperature by the EISCAT radar, are used to study temporal/spatial structures of cusp-type auroral forms in relation to convection. Large-scale patterns of equivalent convection in the dayside polar ionosphere are derived from the magnetic observations in Greenland and Svalbard. This information is used to estimate the ionospheric convection pattern in the vicinity of the cusp/cleft aurora. The reported observations, covering the period 0700-1130 UT, on January 11, 1993, are separated into four intervals according to the observed characteristics of the aurora and ionospheric convection. The morphology and intensity of the aurora are very different in quiet and disturbed intervals. A latitudinally narrow zone of intense and dynamical 630.0 nm emission equatorward of 75 degrees MLAT, was observed during periods of enhanced antisunward convection in the cusp region. This (type 1 cusp aurora) is considered to be the signature of plasma entry via magnetopause reconnection at low magnetopause latitudes, i.e. the low-latitude boundary layer (LLB I,). Another zone of weak 630.0 nm emission (type 2 cusp aurora) was observed to extend up to high latitudes (similar to 79 degrees MLAT) during relatively quiet magnetic conditions, when indications of reverse (sunward) convection was observed in the dayside polar cap. This is postulated to be a signature of merging between a northward directed IMF (B-z > 0) and the geomagnetic field poleward of the cusp. The coexistence of type 1 and 2 auroras was observed under intermediate circumstances. The optical observations from Svalbard and Greenland were also used to determine the temporal and spatial evolution of type 1 auroral forms, i.e. poleward-moving auroral events occurring in the vicinity of a rotational convection reversal in the early post-noon sector. Each event appeared as a local brightening at the equatorward boundary of the pre-existing type 1 cusp aurora, followed by poleward and eastward expansions of luminosity. The auroral events were associated with poleward-moving surges of enhanced ionospheric convection and F-layer ion temperature as observed by the EISCAT radar in Tromso. The EISCAT ion flow data in combination with the auroral observations show strong evidence for plasma flow across the open/closed field line boundary.

The new localism, anti-political development machines, and the role of planning consultants: lessons from London's South Bank

This paper draws on a study of the politics of development planning in London’s South Bank to examine wider trends in the governance of contemporary cities. It assesses the impacts and outcomes of so-called new localist reforms and argues that we are witnessing two principal trends. First, governance processes are increasingly dominated by anti-democratic development machines, characterized by new assemblages of public- and private-sector experts. These machines reflect and reproduce a type of development politics in which there is a greater emphasis on a pragmatic realism and a politics of delivery. Second, the presence of these machines is having a significant impact on the politics of planning. Democratic engagement is not seen as the basis for new forms of localism and community control. Instead, it is presented as a potentially disruptive force that needs to be managed by a new breed of skilled private-sector consultant. The paper examines these wider shifts in urban politics before focusing on the connections between emerging development machines and local residential and business communities. It ends by highlighting some of the wider implications of change for democratic modes of engagement and nodes of resistance in urban politics.

Dynamics of Dissolved Forms of Carbon and Inorganic Nitrogen in Small Watersheds of the Coastal Atlantic Forest in Southeast Brazil

Based on the fact that streamwater quality reflects landscape conditions, the objectives of this study were: to investigate nitrogen (N), carbon (C), and major ion concentrations in six streams crossing minimally disturbed Atlantic Forest areas, with similar geomorphological characteristics; to determine N and C fluxes in one of these pristine streams (Indaia); and assess the impact of human activity on the biogeochemistry of two other streams in the same region, crossing urbanized areas. The distribution pattern of carbon and inorganic nitrogen dissolved forms, as well as the major ion and biogenic gas concentrations in the streamwater, was similar in pristine streams, indicating that the C and N dynamics were determined by influence of some factors, such as climate, atmospheric deposition, geology, soil type, and land covering, which were analogous in the forested watersheds. The urban streams were significantly different from the pristine streams, showing low dissolved oxygen concentrations, high respiration rates, and high concentrations of carbon dioxide, dissolved inorganic nitrogen, dissolved inorganic carbon, and major ion. These differences were attributed to anthropogenic impact on water quality, especially domestic sewage discharge. Additionally, in the Indaia stream, it was possible to observe the importance of rainfall over temporal dynamics of dissolved carbon forms, and also, the obtained specific flux of dissolved inorganic nitrogen was relatively elevated (approximately 11 kg ha(-1) year(-1)). These results reveal the influence of human activity over the biogeochemistry of coastal streams and also indicate the importance N export of Atlantic Forest to the ocean.