Mappaggio fine di un QTL principale per la resa in granella sul cromosoma 3B di frumento duro

In durum wheat, two major QTL for grain yield (Qyld.idw-2B and Qyld.idw-3B) and related traits were identified in a recombinant population derived from Kofa and Svevo (Maccaferri et al. 2008). To further investigate the genetic and physiological basis of allelic variation for this important trait, the fine mapping of Qyld.idw-2B e Qyld.idw-3B was done during the PhD. In this regard, new molecular markers were added to increase the map resolution in the target interval. For Qyld.idw-2B region COS markers derived from the synteny between wheat and rice/ sorghum /brachypodiu genomes were screened. While for Qyld.idw-3B region SSR, ISBP and COS markers obtained from BAC end-sequences and BAC sequences generated during the construction of the 3B physical map (Paux et al., 2008) were screened. In the RIL population a final map resolution of 2,8 markers/cM for Qyld.idw-2B and 0,6 markers/cM for Qyld.idw-3B were obtained. Eighteen pairs of near-isogenic lines (NILs) for Qyld.idw-3B were obtained from F4:5 heterogeneous inbred families. In order to confirm the phenotypic effect of the QTL all pairs were evaluated in field trials (2010 and 2011) for all traits. Three pairs of NILs, with contrasted haplotypes at the target region, were crossed to produce a large F2 population (ca. 7,500 plants in total) that was screened for the identification of recombinants. A total of 233 homozygous F4:5 segmental isolines were obtained and the phenotypic and genotypic characterization of these materials were done. A fine mapping for Qyld.idw-3B was obtained and the QTL peak was identified in a interval of 0,4 cM. All markers were anchored to the Chinese Spring physical map of chr. 3B, which allowed us to identify the BAC Contigs spanning the QTL region and to assign the QTL peak to Contig 954. Sequencing of this contig has revealed the presence of 42 genes.

Structuring of polymer surface by evaporation of sessile microdrops

In this thesis, we investigated the evaporation of sessile microdroplets on different solid substrates. Three major aspects were studied: the influence of surface hydrophilicity and heterogeneity on the evaporation dynamics for an insoluble solid substrate, the influence of external process parameters and intrinsic material properties on microstructuring of soluble polymer substrates and the influence of an increased area to volume ratio in a microfluidic capillary, when evaporation is hindered. In the first part, the evaporation dynamics of pure sessile water drops on smooth self-assembled monolayers (SAMs) of thiols or disulfides on gold on mica was studied. With increasing surface hydrophilicity the drop stayed pinned longer. Thus, the total evaporation time of a given initial drop volume was shorter, since the drop surface, through which the evaporation occurs, stays longer large. Usually, for a single drop the volume decreased linearly with t1.5, t being the evaporation time, for a diffusion-controlled evaporation process. However, when we measured the total evaporation time, ttot, for multiple droplets with different initial volumes, V0, we found a scaling of the form V0 = attotb. The more hydrophilic the substrate was, the more showed the scaling exponent a tendency to an increased value up to 1.6. This can be attributed to an increasing evaporation rate through a thin water layer in the vicinity of the drop. Under the assumption of a constant temperature at the substrate surface a cooling of the droplet and thus a decreased evaporation rate could be excluded as a reason for the different scaling exponent by simulations performed by F. Schönfeld at the IMM, Mainz. In contrast, for a hairy surface, made of dialkyldisulfide SAMs with different chain lengths and a 1:1 mixture of hydrophilic and hydrophobic end groups (hydroxy versus methyl group), the scaling exponent was found to be ~ 1.4. It increased to ~ 1.5 with increasing hydrophilicity. A reason for this observation can only be speculated: in the case of longer hydrophobic alkyl chains the formation of an air layer between substrate and surface might be favorable. Thus, the heat transport to the substrate might be reduced, leading to a stronger cooling and thus decreased evaporation rate. In the second part, the microstructuring of polystyrene surfaces by drops of toluene, a good solvent, was investigated. For this a novel deposition technique was developed, with which the drop can be deposited with a syringe. The polymer substrate is lying on a motorized table, which picks up the pendant drop by an upward motion until a liquid bridge is formed. A consecutive downward motion of the table after a variable delay, i.e. the contact time between drop and polymer, leads to the deposition of the droplet, which can evaporate. The resulting microstructure is investigated in dependence of the processes parameters, i.e. the approach and the retraction speed of the substrate and the delay between them, and in dependence of the intrinsic material properties, i.e. the molar mass and the type of the polymer/solvent system. The principal equivalence with the microstructuring by the ink-jet technique was demonstrated. For a high approach and retraction speed of 9 mm/s and no delay between them, a concave microtopology was observed. In agreement with the literature, this can be explained by a flow of solvent and the dissolved polymer to the rim of the pinned droplet, where polymer is accumulated. This effect is analogue to the well-known formation of ring-like stains after the evaporation of coffee drops (coffee-stain effect). With decreasing retraction speed down to 10 µm/s the resulting surface topology changes from concave to convex. This can be explained with the increasing dissolution of polymer into the solvent drop prior to the evaporation. If the polymer concentration is high enough, gelation occurs instead of a flow to the rim and the shape of the convex droplet is received. With increasing delay time from below 0 ms to 1s the depth of the concave microwells decreases from 4.6 µm to 3.2 µm. However, a convex surface topology could not be obtained, since for longer delay times the polymer sticks to the tip of the syringe. Thus, by changing the delay time a fine-tuning of the concave structure is accomplished, while by changing the retraction speed a principal change of the microtopolgy can be achieved. We attribute this to an additional flow inside the liquid bridge, which enhanced polymer dissolution. Even if the pendant drop is evaporating about 30 µm above the polymer surface without any contact (non-contact mode), concave structures were observed. Rim heights as high as 33 µm could be generated for exposure times of 20 min. The concave structure exclusively lay above the flat polymer surface outside the structure even after drying. This shows that toluene is taken up permanently. The increasing rim height, rh, with increasing exposure time to the solvent vapor obeys a diffusion law of rh = rh0  tn, with n in the range of 0.46 ~ 0.65. This hints at a non-Fickian swelling process. A detailed analysis showed that the rim height of the concave structure is modulated, unlike for the drop deposition. This is due to the local stress relaxation, which was initiated by the increasing toluene concentration in the extruded polymer surface. By altering the intrinsic material parameters i.e. the polymer molar mass and the polymer/solvent combination, several types of microstructures could be formed. With increasing molar mass from 20.9 kDa to 1.44 MDa the resulting microstructure changed from convex, to a structure with a dimple in the center, to concave, to finally an irregular structure. This observation can be explained if one assumes that the microstructuring is dominated by two opposing effects, a decreasing solubility with increasing polymer molar mass, but an increasing surface tension gradient leading to instabilities of Marangoni-type. Thus, a polymer with a low molar mass close or below the entanglement limit is subject to a high dissolution rate, which leads to fast gelation compared to the evaporation rate. This way a coffee-rim like effect is eliminated early and a convex structure results. For high molar masses the low dissolution rate and the low polymer diffusion might lead to increased surface tension gradients and a typical local pile-up of polymer is found. For intermediate polymer masses around 200 kDa, the dissolution and evaporation rate are comparable and the typical concave microtopology is found. This interpretation was supported by a quantitative estimation of the diffusion coefficient and the evaporation rate. For a different polymer/solvent system, polyethylmethacrylate (PEMA)/ethylacetate (EA), exclusively concave structures were found. Following the statements above this can be interpreted with a lower dissolution rate. At low molar masses the concentration of PEMA in EA most likely never reaches the gelation point. Thus, a concave instead of a convex structure occurs. At the end of this section, the optically properties of such microstructures for a potential application as microlenses are studied with laser scanning confocal microscopy. In the third part, the droplet was confined into a glass microcapillary to avoid evaporation. Since here, due to an increased area to volume ratio, the surface properties of the liquid and the solid walls became important, the influence of the surface hydrophilicity of the wall on the interfacial tension between two immiscible liquid slugs was investigated. For this a novel method for measuring the interfacial tension between the two liquids within the capillary was developed. This technique was demonstrated by measuring the interfacial tensions between slugs of pure water and standard solvents. For toluene, n-hexane and chloroform 36.2, 50.9 and 34.2 mN/m were measured at 20°C, which is in a good agreement with data from the literature. For a slug of hexane in contact with a slug of pure water containing ethanol in a concentration range between 0 and 70 (v/v %), a difference of up to 6 mN/m was found, when compared to commercial ring tensiometry. This discrepancy is still under debate.

I materiali dell'assenza nella poesia della fine secolo portoghese

Il presente studio ha come obiettivo quello di chiarire le dinamiche culturali iscritte nella fine secolo portoghese a partire dall’analisi di alcune opere letterarie -in particolar modo poetiche - tra cui spicca il Só di António Nobre. L’Ultimatum inglese del 1890 mandando in frantumi il progetto imperiale in Africa, scatena un conflitto che si manifesta non solo a livello di un confronto con l’Altro, ma soprattutto, per le sue implicazioni simboliche, nei termini di un confronto interno proprio con l’immaginario nazionale. L’Ultimatum mette in crisi l’iperidentità descritta da Eduardo Lourenço come il frutto di una storia marcata da una deriva atlantica rispetto al resto d’Europa ed elaborata durante secoli di letteratura come il volto più autentico del Portogallo. Contemporaneamente segna inesorabilmente la distanza da quell’immaginario europeo e moderno che in stretto legame con il progetto imperiale ne costituiva le fondamenta. La poesia dell’epoca segue il paradigma apocalittico che associa al pianto e all’invettiva gli elementi di un’aspettativa messianica di riscatto: alla rabbia segue l’invito di riporre l’attenzione nelle glorie di un tempo in modo da rafforzare il Portogallo decaduto. La rivisitazione in chiave rigeneratrice del passato e dello spazio nazionale è una costante della letterautra neoromantica, l’opera di Antonio Nobre tuttavia non può essere affrontata secondo questa lettura: non si tratta qui di nessun recupero dell’età dell’oro, al contrario, la modernità dell’autore sta nel dichiarare l’impraticabilità di un immaginario che più che perduto non è mai esistito e si rivela dunque nella sua natura di feticcio.

Bioetica femminista ed etica della cura: un approccio alle questioni di fine vita

Scopo di tale lavoro è indagare la valenza dell'etica femminista e dell'etica della cura all'interno del campo della bioetica, in particolar modo rispetto ai dilemmi morali attinenti alle questioni di fine vita. Nell'intento di far emergere l'importanza dell'approccio femminista alla bioetica, ci occuperemo inizialmente dell'analisi dell'etica femminista, individuando i tratti caratteristici e le peculiarità proprie di tale pensiero. Secondariamente illustreremo la nascita dell'etica della cura e tratteremo delle differenti correnti che la costituiscono, al fine di mettere in evidenza le caratteristiche principali ascrivibili al pensiero della cura di tipo femminista. Dopo aver preso in considerazione l'etica femminista e l'etica della cura, esamineremo in che termini il concetto di autonomia possa essere interpretato dalla riflessione femminista nel suo complesso, cominciando a riflettere intorno al ruolo che l'etica della cura e l'etica femminista possono avere all'interno del campo della bioetica. In tal senso, prenderemo in esame le caratteristiche e gli obiettivi della bioetica femminista, soffermandoci ad indagare l'apporto che l'approccio femminista può fornire alla discussione intorno alle questioni di fine vita. Al riguardo, esamineremo in che modo l'etica femminista e l'etica della cura possano espandere il discorso bioetico intorno al fine vita, vagliando i timori e le preoccupazioni espresse dalla riflessione femminista e considerando i nuovi scenari e le nuove prospettive tracciate dall'etica della cura.

Investigation of heterogeneous catalysts for the synthesis of fine chemicals

In order to match the more stringent environmental regulations, heterogenization of traditional homogeneous processes is one of the main challenges of the modern chemical industry. Great results have been achieved in the fields of petrochemicals and base chemicals, whereas in fine chemical industry most of the synthetic procedures are based on multistep processes catalyzed by homogeneous catalysts mainly used in stoichiometric amounts. In the fine chemicals manufacture not so much efforts have been devoted to the investigation of suitable solid catalysts for the development of greener processes, then this sector represent a very attractive field of research. In this context, the present work deals with the extensive investigation of the possibility to heterogenize existing processes, in particular two different classes of reactions have been studied: alkylation of aromatic and heteroaromatic compounds and selective oxidation of aromatic alcohols. Traditional solid acid catalysts, such as zeolites, clays and alumina have been tested in the gas phase alkylation of 1,2-methylendioxybenzene, core building block of many drugs, pesticides and fragrances. The observed reactivity were clarified through a deep FTIR investigation complemented by ab initio calculation. The same catalysts were tested in the gas phase isopropylation of thiophene with the aim of clearly attribute the role of the reaction parameters in the reaction proceeding and verify the possibility to enhance the selectivity of one of the two possible isomers. Finally various Au/CeO2 catalysts were tested in the synthesis of benzaldehyde and piperonal, two aldehydes largely employed in the manufacture of fine chemical products, through liquid phase oxidation of the corresponding alcohols in very mild conditions.

The C-4-Dicarboxylate carriers DcuB and DctA of Escherichia coli: function as cosensors and topology

Das fakultativ anaerobe Enterobakterium Escherichia coli nutzt C4-Dicarboxylate sowohl unter aeroben als auch anaeroben Bedingungen als Kohlenstoff- und Energiequelle. Die Aufnahme der C4-Dicarboxylaten und die Energiekonservierung mittels Fumaratatmung wird durch das Zweikomponentensystem DcuSR reguliert. Die Sensorhistidinkinase DcuS und der nachgeschaltete Responseregulator DcuR aktivieren bei Verfügbarkeit von C4-Dicarboxylaten die Expression der Gene für den Succinat Transporter DctA, den anaeroben Fumarat/Succinat Antiporter DcuB, die Fumarase B sowie die Fumaratreduktase FrdABCD. Die Transportproteine DctA und DcuB wiederum regulieren die Expression der DcuSR-abhängigen Gene negativ. Fehlen von DctA oder DcuB resultiert bereits ohne Effektor in einer maximalen Expression von dctA bzw. dcuB. Durch gerichtete und ungerichtete Mutagenese wurde gezeigt, dass die Transportfunktion des Carriers DcuB unabhängig von seiner regulatorischen Funktion ist. DcuB kann daher als Cosensor des DcuSR Systems angesehen werden.rnUnter Verwendung von Reportergenfusionen von C-terminal verkürzten Konstrukten von DcuB mit der Alkalischen Phosphatase und der β-Galactosidase wurde die Topologie des Multitransmembranproteins DcuB bestimmt. Zusätzlich wurde die Zugänglichkeit bestimmter Aminosäurereste durch chemische Modifikation mit membran-durchlässigen und membran-undurchlässigen Thiolreagenzien untersucht. Die erhaltenen Ergebnisse deuten auf die Existenz eines tief in die Membran reichenden, hydrophilen Kanal hin, welcher zum Periplasma hin geöffnet ist. Mit Hilfe der Topologie-Studien, des Hydropathie-Blots und der Sekundärstruktur-Vorhersage wurde ein Modell des Carriers erstellt. DcuB besitzt kurze, periplasmatisch liegende Proteinenden, die durch 12 Transmembranhelices und zwei große hydrophile Schleifen jeweils zwischen TM VII/VIII und TM XI/XII verbunden sind. Die regulatorisch relevanten Reste K353, T396 und D398 befinden sich innerhalb von TM XI sowie auf der angrenzenden cytoplasmatischen Schleife XI-XII. Unter Berücksichtigung der strukturellen und funktionellen Aspekte wurde ein Regulationsmodell erstellt, welches die gemeinsam durch DcuB und DcuS kontrollierte C4-Dicarboxylat-abhängige Genexpression darstellt. rnDer Effekt von DctA und DcuSR auf die Expression einer dctA´-´lacZ Reportergenfusion und auf die aerobe C4-Dicarboxylat-Aufnahme wurde untersucht. In-vivo FRET-Messungen weisen auf eine direkte Wechselwirkung zwischen dem Carrier DctA und dem Sensor DcuS hin. Dieses Ergebnis stützt die Theorie der Regulation von DcuS durch C4-Dicarboxylate und durch die Cosensoren DctA bzw. DcuB mittels direkter Protein-Protein Interaktion.rn

Nothing ever ends: il concetto di fine negli universi seriali

L'oggetto principale di questa tesi è il concetto di fine negli universi seriali. Spesso si intende il “The End” in un romanzo o in un film come un momento climatico, e che i finali sono collegati ad una teleologia che guida il testo nel suo insieme. Come risultato di questo modo di approcciare i finale, una delle opinioni più comuni è simile a quella di Henry James [1884] che diceva: “distribution at the last of prizes, pensions, husbands, wives, babies, millions, appended paragraph, and cheerful remarks”. Ma è molto difficile applicare la posizione di James a un romanzo modernista o a un film postmoderno e ancor ameno ai cosiddetti universi narrativi seriali, in cui la storia si sviluppa lungo decenni. Nel nostro contemporaneo panorama mediale, il testo non è più concepito come un'opera, ma deve essere costruito e concepito come un network, un ecosistema in cui nuove connessioni economiche e nuove relazioni bottom-up modellano una struttura inedita. Questa nuova struttura può riconfigurare il senso del finale e della fine, ma anche per le vast narratives spesso si dice che “Il finale non corrispondeva alla spirito della storia”, “il finale era deludente”. Potremmo sostenere che il concetto di finale sia ancora importante, nonostante sia stato superato dal punto di vista teorico. Per analizzare se il finale è costruito in un maniera non-lineare ma percepito come teleologico, la tesi è strutturata in due parti e di quattro capitoli. Prima parte “Storia” [1. Letteratura; 2. Cinema], seconda “Forme/strutture” [3. Transmedia; 4. Remix]

Fine tuning of on-growing diets for farmed marine fish species as a key tool to sustain the aquaculture development

The aim of this thesis was to investigate some important key factors able to promote the prospected growth of the aquaculture sector. The limited availability of fishmeal and fish oil led the attention of the aquafeed industry to reduce the dependency on marine raw materials in favor of vegetable ingredients. In Chapter 2, we reported the effects of fishmeal replacement by a mixture of plant proteins in turbot (Psetta maxima L.) juveniles. At the end of the trial, it was found that over the 15% plant protein inclusion can cause stress and exert negative effects on growth performance and welfare. Climate change aroused the attention of the aquafeed industry toward the production of specific diets capable to counteract high temperatures. In Chapter 3, we investigated the most suitable dietary lipid level for gilthead seabream (Sparus aurata L.) reared at Mediterranean summer temperature. In this trial, it was highlighted that 18% dietary lipid allows a protein sparing effect, thus making the farming of this species economically and environmentally more sustainable. The introduction of new farmed fish species makes necessary the development of new species-specific diets. In Chapter 4, we assessed growth response and feed utilization of common sole (Solea solea L.) juveniles fed graded dietary lipid levels. At the end of the trial, it was found that increasing dietary lipids over 8% led to a substantial decline in growth performance and feed utilization indices. In Chapter 5, we investigated the suitability of mussel meal as alternative ingredient in diets for common sole juveniles. Mussel meal proved to be a very effective alternative ingredient for enhancing growth performance, feed palatability and feed utilization in sole irrespectively to the tested inclusion levels. This thesis highlighted the importance of formulating more specific diets in order to support the aquaculture growth in a sustainable way.

"Il carceriere di sé medesimo" di Lodovico Adimari e Alessandro Melani, Firenze 1681. Dalla «comedia» di Pedro Calderón de la Barca al «drama per musica» italiano di fine Seicento

Questo lavoro è imperniato sullo studio di uno dei melodrammi più interessanti della fine del XVII secolo: “Il carceriere di sé medesimo” di Lodovico Adimari (1644-1708) e Alessandro Melani (1639-1703), allestito per la prima volta a Firenze nel 1681, e ripreso nel giro di una ventina d’anni a Reggio (1684), a Bologna (1697) e a Vienna (1702). L’opera vanta un’origine drammatica di spicco: risale infatti alla commedia “Guardarse a sí mismo” di Pedro Calderón de la Barca (1600-1681) mediata dal “Geôlier de soi-mesme” di Thomas Corneille (1625-1709), e presenta qualità poetiche e musicali evidenti, assicurate dai nomi del poeta Lodovico Adimari e del compositore Alessandro Melani. A ciò si aggiungano una tradizione articolata in quattro allestimenti, nonché un elevato numero di testimoni superstiti: cinque edizioni del libretto (testimoniate da numerosi esemplari) e il numero fortunatissimo di tre partiture manoscritte, conservate a Parigi, Bologna e Modena. La tesi contiene l’edizione critica del “Carceriere di sé medesimo” di Adimari con tutte le varianti accumulatesi nella riedizione del libretto e nella copiatura della partitura, l’analisi del dramma, a partire dal confronto tra i testi di Calderón, Corneille e Adimari, e lo studio delle sue componenti drammatiche, formali e contenutistiche. Si aggiunge uno studio sul contesto storico-musicale degli allestimenti di Firenze, Reggio, Bologna e Vienna, nonché l’edizione dei restanti tre drammi di Adimari: la commedia “Le gare dell’amore e dell’amicizia” (1679), e il dramma per musica “L’amante di sua figlia” (1684).

L'immagine di Roma nella cultura russa tra fine XVIII secolo e inizio XIX secolo

Nella tesi si osserva come nella cultura russa cambiava l’immagine di Roma. Se ancora alla fine del settecento l’antichità romana poteva risultare solamente uno strumento retorico-filologico da utilizzare per fare il proprio discorso più convincente, la generazione dei decabristi la stessa antica romanità la accostava alla cultura e storia russe tramite gli elevati ideali civici. La romanità ora risultava uno strumento di analisi della esperienza storica e politica della Russia anche nel contesto europeo. Da qui nasceva una serie di modelli russi legati all’antica Roma: il Catone di Radiscev, il Bruto dei decabristi, ecc. Vi attingeva generosamente anche una corrente di lirica russo-antica con i suoi ricchi riferimenti agli autori classici, Ovidio, Tacito, Orazio. Nasceva così una specie di Roma antica russa che viveva secondo le sue regole etiche ed estetiche. Con il fallimento dell’esperienza decabrista cambia anche l’approccio alle antichità: ci si distacca dalla visione storico-morale dell’antico, Roma non è più una categoria da emulare, ma una storia a sé stante e chiusa in sé stessa come ogni periodo storico. Essa smette di essere un criterio universale di giudizio etico e morale. Allo stesso tempo, una parte integrante della cultura russa all’epoca era il viaggio a Roma. I russi cresciuti con interesse e amore verso la Roma antica, impazienti ed emozionati, desideravano ora di vedere quella patria dei classici. Era come se fosse un appuntamento fra gli amici di vecchia data. Si affrettava a verificare di persona le muse di storia e di poesia. E con tutto questo si imparavano ad amare tutti i defetti della Roma reale, spesso inospitale, la Roma del dolore e della fatica. La voce importante nel racconto romano dei russi era anche la Roma del cristianesimo, dove ritrovare e ricoprire la propria “anima cristiana”.

Fine Mapping of qroot-yield-1.06, a QTL for Root, Plant Vigor and Yield in Maize

Root-yield-1.06 is a major QTL affecting root system architecture (RSA) and other agronomic traits in maize. The effect of this QTL has been evaluated with the development of near isogenic lines (NILs) differing at the QTL position. The objective of this study was to fine map qroot-yield-1.06 by marker-assisted searching for chromosome recombinants in the QTL interval and concurrent root phenotyping in both controlled and field conditions, through successive generations. Complementary approaches such as QTL meta-analysis and RNA-seq were deployed in order to help prioritizing candidate genes within the QTL target region. Using a selected group of genotypes, field based root analysis by ‘shovelomics’ enabled to accurately collect RSA information of adult maize plants. Shovelomics combined with software-assisted root imaging analysis proved to be an informative and relatively highly automated phenotyping protocol. A QTL interval mapping was conducted using a segregating population at the seedling stage grown in controlled environment. Results enabled to narrow down the QTL interval and to identify new polymorphic markers for MAS in field experiments. A collection of homozygous recombinant NILs was developed by screening segregating populations with markers flanking qroot-yield-1.06. A first set of lines from this collection was phenotyped based on the adapted shovelomics protocol. QTL analysis based on these data highlighted an interval of 1.3 Mb as completely linked with the target QTL but, a larger safer interval of 4.1 Mb was selected for further investigations. QTL meta-analysis allows to synthetize information on root QTLs and two mQTLs were identified in the qroot-yield-1.06 interval. Trascriptomics analysis based on RNA-seq data of the two contrasting QTL-NILs, confirmed alternative haplotypes at chromosome bin 1.06. qroot-yield-1.06 has now been delimited to a 4.1-Mb interval, and thanks to the availability of additional untested homozygous recombinant NILs, the potentially achievable mapping resolution at qroot-yield-1.06 is c. 50 kb.

Progetto lavanda: ottimizzazione del servizio attraverso uno studio statistico - gestionale e focus sul fine vita dei pannolini compostabili

L'obiettivo di questo elaborato é quello di mettere in evidenza una categoria critica dei rifiuti: i pannolini usa e getta. Essi, infatti, consumano una quantità ingente di risorse ed energia ed inoltre producono un enorme impatto ambientale connesso allo smaltimento finale. Si pensi che quest'ultimi rappresentano circa il 5% del totale dei rifiuti prodotti: 2 miliardi di pannolini solo in Italia che impiegano più di 500 anni per decomporsi in discarica. Per studiare questo fenomeno si è presa in considerazione una cooperativa sociale bolognese che ha molto a cuore la salvaguardia dell'ambiente e che, attraverso un suo progetto, il progetto Lavanda, ha istituito una lavanderia che si occupa di fornire attraverso il noleggio pannolini lavabili agli asili del territorio: la cooperativa Eta Beta. Inoltre, recentemente, essa ha deciso di utilizzare anche pannolini compostabili, forniti dall'azienda IES Gas, per ridurre ulteriormente le emissioni nell'ambiente. Infatti il motore principale della cooperativa è quello di coniugare la raccolta differenziata alla riduzione dei rifiuti, concetto che dovrebbe essere alla base di ogni azienda, ogni famiglia, ogni persona ma che in Italia risulta di difficile realizzazione.Utilizzando i dati dalla Cooperativa e contattando le cooperative che collaborano con essa (Cadiai e Karabak) ed anche gli asili affiliati si è deciso di effettuare un'analisi statistico - gestionale per individuare il numero medio di pannolini utilizzati da un bambino in un anno scolastico andando a considerare diverse variabili come la tipologia di asilo, l'età dei bambini o le presenze. Dopo questa parentesi 'gestionale', lo studio ha ripreso un'impronta 'ambientale': infatti si è andato a studiare il processo anaerobico e aerobico per lo smaltimento dei pannolini compostabili attraverso un esperimento svolto presso il laboratorio di Chimica e di Processo del DICAM, facoltà di Ingegneria, Alma Mater Studiorum di Bologna

Fine particulate matter measurements in Swiss restaurants, cafés and bars: what is the effect of spatial separation between smoking and non-smoking areas?

We performed 124 measurements of particulate matter (PM(2.5)) in 95 hospitality venues such as restaurants, bars, cafés, and a disco, which had differing smoking regulations. We evaluated the impact of spatial separation between smoking and non-smoking areas on mean PM(2.5) concentration, taking relevant characteristics of the venue, such as the type of ventilation or the presence of additional PM(2.5) sources, into account. We differentiated five smoking environments: (i) completely smoke-free location, (ii) non-smoking room spatially separated from a smoking room, (iii) non-smoking area with a smoking area located in the same room, (iv) smoking area with a non-smoking area located in the same room, and (v) smoking location which could be either a room where smoking was allowed that was spatially separated from non-smoking room or a hospitality venue without smoking restriction. In these five groups, the geometric mean PM(2.5) levels were (i) 20.4, (ii) 43.9, (iii) 71.9, (iv) 110.4, and (v) 110.3 microg/m(3), respectively. This study showed that even if non-smoking and smoking areas were spatially separated into two rooms, geometric mean PM(2.5) levels in non-smoking rooms were considerably higher than in completely smoke-free hospitality venues. PRACTICAL IMPLICATIONS: PM(2.5) levels are considerably increased in the non-smoking area if smoking is allowed anywhere in the same location. Even locating the smoking area in another room resulted in a more than doubling of the PM(2.5) levels in the non-smoking room compared with venues where smoking was not allowed at all. In practice, spatial separation of rooms where smoking is allowed does not prevent exposure to environmental tobacco smoke in nearby non-smoking areas.