Basic density and pulp yield relationship with some chemical parameters in eucalyptus trees

The objective of this work was to evaluate the use of basic density and pulp yield correlations with some chemical parameters, in order to differentiate an homogeneous eucalyptus tree population, in terms of its potential for pulp production or some other technological applications. Basic density and kraft pulp yield were determined for 120 Eucalyptus globulus trees, and the values were plotted as frequency distributions. Homogenized samples from the first and fourth density quartiles and first and fourth yield quartiles were submitted to total phenols, total sugars and methoxyl group analysis. Syringyl/guaiacyl (S/G) and syringaldehyde/vanillin (S/V) ratios were determined on the kraft lignins from wood of the same quartiles. The results show the similarity between samples from high density and low yield quartiles, both with lower S/G (3.88-4.12) and S/V (3.99-4.09) ratios and higher total phenols (13.3-14.3 g gallic acid kg-1 ). Woods from the high yield quartile are statistically distinguished from all the others because of their higher S/G (5.15) and S/V (4.98) ratios and lower total phenols (8.7 g gallic acid kg-1 ). Methoxyl group and total sugars parameters are more adequate to distinguish wood samples with lower density.

Effect of pruning on tree growth, yield, and wood properties of Tectona grandis plantations in Costa Rica

Abstract

Ganhos genéticos preditos por diferentes métodos de seleção em progênies de Eucalyptus urophylla

O objetivo deste trabalho foi avaliar parâmetros genéticos e comparar os ganhos preditos por meio de diferentes métodos de seleção em famílias de meios-irmãos de Eucalyptus urophylla. Foi utilizada seleção entre e dentro, seleção combinada e seleção com base em modelos mistos (REML/BLUP) para os caracteres diâmetro à altura do peito, altura total e volume total com casca. Foi utilizado o teste de progênie constituído de 100 famílias de meios-irmãos com 55 meses de idade, em espaçamento de 3x2 m, em delineamento de blocos ao acaso, com cinco repetições. As progênies apresentaram variabilidade genética significativa e elevada magnitude de herdabilidade para os caracteres estudados, o que evidencia alto controle genético e condições favoráveis para seleção. Todos os métodos avaliados foram eficientes para aplicação no melhoramento de eucalipto. No entanto, a seleção combinada e a seleção por modelos mistos (BLUP) proporcionam estimativas de ganhos significativamente maiores às obtidas com a seleção entre e dentro, e maior eficiência na escolha dos melhores indivíduos dentro da população.

Aggregate stability in soils cultivated with eucalyptus

The objective of this work was to evaluate the aggregate stability of tropical soils under eucalyptus plantation and native vegetation, and assess the relationships between aggregate stability and some soil chemical and physical properties. Argisols, Cambisol, Latosols and Plinthosol within three eucalyptus-cultivated regions, in the states of Espírito Santo, Rio Grande do Sul and Minas Gerais, Brazil, were studied. For each region, soils under native vegetation were compared to those under minimum tillage with eucalyptus cultivation. The aggregate stability was measured using the high-energy moisture characteristic (HEMC) technique, i.e., the moisture release curve at very low suctions. This method compares the resistance of aggregates to slaking on a relative scale from zero to one. Thus, the aggregate stability from different soils and management practices can be directly compared. The aggregate stability ratio was greater than 50% for all soils, which shows that the aggregate stability index is high, both in eucalyptus and native vegetation areas. This suggests that soil management adopted for eucalyptus cultivation does not substantially modify this property. In these soils, the aggregate stability ratio does not show a good relationship with clay or soil organic matter contents. However, soil organic matter shows a positive relationship with clay content and cation exchange capacity.

Effect of thinning on stem form and wood characteristics of teak (Tectona grandis) in a humid tropical site in Costa Rica

Abstract

Transpiration response of upland rice to water deficit changed by different levels of eucalyptus biochar

The objective of this work was to evaluate the effect of eucalyptus biochar on the transpiration rate of upland rice 'BRSMG Curinga' as an alternative means to decrease the effect of water stress on plant growth and development. Two-pot experiments were carried out using a completely randomized block design, in a split-plot arrangement, with six replicates. Main plots were water stress (WS) and no-water stress (NWS), and the subplots were biochar doses at 0, 6, 12 and 24% in growing medium (sand). Total transpirable soil water (TTSW), the p factor - defined as the average fraction of TTSW which can be depleted from the root zone before water stress limits growth -, and the normalized transpiration rate (NTR) were determined. Biochar addition increased TTSW and the p factor, and reduced NTR. Consequently, biochar addition was able to change the moisture threshold (p factor) of the growing medium, up to 12% maximum concentration, delaying the point where transpiration declines and affects yield.

Desempenho silvicultural e seleção precoce de clones de híbridos de eucalipto

O objetivo deste trabalho foi avaliar a variabilidade genética e o desempenho silvicultural de clones de híbridos interespecíficos de Eucalyptus urophylla, E. globulus, E. maidenii, E. saligna, E. grandis, E. pellita, E. resinifera, E. kirtoniana e E. dunnii, e determinar a viabilidade da seleção precoce em selecionar clones superiores. Os diâmetros do tronco à altura do peito aos três (DAP3) e sete (DAP7) anos de idade e a altura total das árvores aos sete anos de idade foram mensurados. Utilizou-se o delineamento experimental de blocos ao acaso, com 138 clones, 10 repetições e seis plantas por parcela. Os dados foram submetidos à análise de variância e agrupados pelo método das k-médias, tendo-se realizado a comparação de médias e determinado a correlação de Pearson (r) entre as variáveis avaliadas. A validação do agrupamento foi realizada por meio de análise de variância e do teste de Tukey. Os clones de híbridos interespecíficos de Eucalyptus apresentaram variabilidade genética. Foram estabelecidos cinco grupos de clones com base no desempenho silvicultural (DAP3, DAP7 e altura). O DAP3 é altamente correlacionado ao DAP7 e à altura aos sete anos de idade. A seleção com base no DAP3 pode ser utilizada para identificar clones superiores de Eucalyptus com grande vigor de crescimento.

Early selection in open-pollinated Eucalyptus families based on competition covariates

The objetive of this work was to evaluate the influence of intergenotypic competition in open-pollinated families of Eucalyptus and its effects on early selection efficiency. Two experiments were carried out, in which the timber volume was evaluated at three ages, in a randomized complete block design. Data from the three years of evaluation (experiment 1, at 2, 4, and 7 years; and experiment 2, at 2, 5, and 7 years) were analyzed using mixed models. The following were estimated: variance components, genetic parameters, selection gains, effective number, early selection efficiency, selection gain per unit time, and coincidence of selection with and without the use of competition covariates. Competition effect was nonsignificant for ages under three years, and adjustment using competition covariates was unnecessary. Early selection for families is effective; families that have a late growth spurt are more vulnerable to competition, which markedly impairs ranking at the end of the cycle. Early selection is efficient according to all adopted criteria, and the age of around three years is the most recommended, given the high efficiency and accuracy rate in the indication of trees and families. The addition of competition covariates at the end of the cycle improves early selection efficiency for almost all studied criteria.

Optimal Mechanical PulpingProcesses for Eucalyptus, Acacia and Birch

Tässä diplomityössä tutkittiin ja vertailtiin eukalyptuksen, akaasian ja koivun kemimekaanista kuiduttamista ja valkaisua. Yleensä näitä puulajeja käytetään sellun keittoon. Puulajit eroavat toisistaan kasvupaikan ja kuiturakenteen osalta. Eukalyptus ja akaasia ovat niin sanottuja trooppisia lehtipuita, kun taas koivu kasvaa pohjoisilla vyöhykkeillä. Koivulla on kookkaimmat kuidut ja akaasialla pienimmät kuidut. Myös näiden lajien putkilot eroavat toisistaan. Koivun putkilot ovat pitkiä ja kapeita, kun taas eukalyptuksen ja akaasian putkilot ovat lyhyitä ja leveitä. Prosessiksi valittiin kaksivaiheinen APMP-prosessi. Koeajot tehtiinKeskuslaboratorio Oy:ssä. Massoille asetettiin seuraavat tavoitteet: freeness 150-200 ml ja vaaleus 80 %ISO. Eukalyptukselle ja koivulle tehtiin kaksi erilaista impregnointisarjaa, mutta akaasialle vain yksi. Jauhatuksen viimeisessä vaiheessa kokeiltiin myös jauhinvalkaisua. Jauhatuksen energiankulutus oli korkea varsinkin eukalyptuksella ja akaasialla. Jotta energiankulutus saataisiin pienemmäksi, tulisi käyttää enemmän lipeää, mutta se johtaa alkalitummumiseen. Lopuksi massat valkaistiin laboratoriossa. Eukalyptus ja koivu pystyttiin valkaisemaan vaaleuteen 80 %ISO, mutta eukalyptuksen valkaisu vaati enemmän peroksidia kuin koivun valkaisu. Akaasian lähtövaaleus oli niin alhainen, ettei siinä päästy tavoitevaaleuteen. Eukalyptuksella on parempi valonsironta ja paremmat lujuusominaisuudet kuin koivulla. Kemimekaanista massaa voidaan käyttää hienopaperissa parantamassa jäykkyyttä, bulkkia ja valonsirontaa, mutta usein ongelmana on alhainen vaaleus ja huono vaaleuden pysyvyys. Kemimekaanista massaa voidaankäyttää missä tahansa mekaanisissa painopapereissa. Mekaanisissa painopapereissa kemimekaanisella lehtipuumassalla voidaan korvata mekaanista havupuumassaa. Akaasia on niin tummaa, ettei sitä voida käyttää korkeavaaleuksisiin papereihin. Eukalyptus ja koivu ovat vaaleampia ja helpompia valkaista kuin akaasia, mutta myös niillä on niin huono vaaleudenpysyvyys että käyttö hienopapereissa on rajoittunutta. Mekaanisille eukalyptus ja koivumassoille hienopaperia parempi käyttökohde on mekaaniset painopaperit, kuten MWC-paperi.

Caracterização química do "pitch" em indústria de celulose e papel de Eucalyptus

The chemical analysis of the acetone, chloroform, toluene and methanol extracts of a pitch sample was carried out by IR and GC-MS, leading to the identification of sixty nine compounds, including fatty acids, alcohols and hydrocarbons. Analysis of the acetone extractive of a eucalyptus wood used in Brazil for pulp production was also carried out, resulting in identification of fifty nine compounds, including mainly fatty acids, phenolic compounds, beta-sitosterol and other steroids. This analysis showed that pitch formation had a contribution from wood extractives and other sources of contamination. The results obtained and the methodology applied can be used by the pulp industry to develop new methods of pitch control.

Compostos polifenólicos do kino de Eucalyptus citriodora

Phytochemical analysis of the kino of Eucalyptus citriodora led to the isolation of 1-O,2-O-digaloil-6-O-trans -p-cumaroil-beta-D-glucopyranoside, 1-O-trans-p-cumaroil-6-O -cinamoil-beta-D-glucopyranoside, alpha and beta 6-O-trans-p-cumaroil-D-glucopyranoside, 7-methylaromadendrin-4'-O-6''- trans-p-cumaroil-beta-D-glucopyranoside, aromadendrin, aromadendrin-7-methyl-ether, naringenin, sakuranetin, kaempferol-7-methyl-ether and galic acid. Structural elucidation of the isolated compounds was established on the basis of spectral data, particularly by the use of 1D NMR and several 2D shift correlated NMR pulse sequences (¹H,¹H-COSY, HMQC, HMBC).

Caracterização das O-acetil-(4-O-metilglicurono)xilanas isoladas da madeira de Eucalyptus urograndis

The O-acetyl-4-O-methyl-(glucurono)xylans were isolated from E. urograndis by extraction with dimethyl sulfoxide, analysed for monosaccharide composition and structurally characterized by NMR spectroscopy. These xylans contained one 4-O-methyl-glucuronic acid substituent and 5.5 acetyl groups for approximately 10 xylose residues. About 10% of 4-O-methyl-glucuronic acid (MeGlcA) units were branched at O-2. The O-acetyl-4-O-methyl-(glucurono)-xylans were composed of the following (1 → 4)-linked β-D-xylopyranosyl structural elements: unsubstituted (51 mol%), 2-O-acetylated (12 mol%), 3-O-acetylated (20 mol%), 2,3-di-O-acetylated (6 mol%) and [MeGlcA α-(1 → 2)] [3-O-acetylated] (11 mol%). The weight-average molar mass and polydispersity of this xylan were 34.9 kDa and 1.16, respectively, as measured by size-exclusion chromatography.