991 resultados para Eficiência em edifícios
Resumo:
In Brazil, phosphorus availability is one factor that that more limit yield of upland rice under rainfed system. Then, better understanding of cultivars development at phosphorus soil fertilization is very important in the production systems making this more sustainable. The objective was to evaluate the influence of phosphorus doses applied to the soil over the root length, root and shoot dry matter, concentration and content of macronutrient and zinc in shoot and root as well as the efficiency of nutrient uptake per meter root of upland cultivars of intermediate and modern groups. The experiment was carried out in greenhouse conditions in a completely randomized design in factorial scheme 4 x 4. Treatments were four levels of P fertilization applied at the soil (0, 50, 100 and 200 mg dm(-3) of P) and four upland rice cultivars (Maravilha - modern group, IAC-201, IAC-202 and Carajas - intermediate group). There is increase in phosphorus availability in the soil with increasing levels of P fertilization. Under low phosphorus availability, cultivars of the intermediate group have better shoots and root system development in relation to the modern cultivar group. Level of phosphorus affected nutrients contents in shoots and root system of upland rice cultivars. The increasing phosphorus fertilization increased uptake of nutrients per meter of root; and although under higher phosphorus availability there was a greater root growth, in low phosphorus availability root growth was greater at the expense of shoot growth.
Resumo:
Evaluated the evapotranspiration (ETc) and the efficiency of water use (USA) by the fig tree 'Purple Valinhos' submitted to irrigation and mulching (bagacilho of sugar cane crushed) in the first production cycle, at conditions of Botucatu, St. Paul. We used the method of soil water balance and to obtain the reference evapotranspiration method was used Montheit FAO Penman 56. For the assessment of crop coefficients (kc) we adopted the following phenological distribution: phase 1 - between transplanting and 20% of the vegetative (DV), ii) phase 2 - 20 to 80% DV, and iii) phase 3 - fruiting. Observe the cumulative ETc 409.4 and 465.8 mm in 254 days after transplanting (DAT) and averages of 1.47 and 1.67 mm day(-1), with and without mulching (CC and SC). The crop coefficients (kc) mediums were 0.16, 0.43 and 0.49 for SC and 0.18, 0.44 and 0.50 for CC, in phases 1 and 3, respectively. The EUA values decrease with increasing the volume of water received and ranged between 1.65 and 3.32 kg of green figs per m(3) of water for irrigated SC and CC.
Resumo:
Pós-graduação em Agronomia (Produção Vegetal) - FCAV
Resumo:
Pós-graduação em Agronomia (Produção Vegetal) - FCAV
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Agronomia (Horticultura) - FCA
Resumo:
Pós-graduação em Engenharia Mecânica - FEB
Resumo:
A remoção da smear layer é um procedimento importante para a regeneração periodontal e para o tratamento da sensibilidade dentinária. Diversos tratamentos tem sido realizados para sua remoção, porém, mostrando resultados conflitantes ou insatisfatórios. No presente estudo nos propomos a analisar através do microscópio eletrônico de varredura a eficiência dos detergentes: lauril sulfato de sódio, Plax e de mamona assim como o EDTA 24% na remoção da smear layer. Todos os produtos testados foram aplicados com bolinha de algodão, renovada a cada 30 segundos, a qual era esfregada na superfície radicular por diferentes períodos. As fotomicrografias foram analisadas através da aplicação de um índice de remoção da smear layer por três examinadores calibrados e os resultados analisados estatisticamente. De acordo com nossos resultados pudemos chegar as seguintes conclusões: 1- a instrumentação com curetas de Gracey provocou a formação da smear layer; 2- o detergente lauril sulfato de sódio não removeu a smear layer, tendo sido o pior resultado entre os detergentes testados; 3- Os detergentes Plax e de mamona mostraram resultados semelhantes entre si e superiores ao controle negativo e ao lauril sulfato de sódio, porém, não removeram a smear layer satisfatoriamente; 4- O EDTA 24% neutro mostrou ser eficiente para a remoção da smear layer.
Resumo:
The objective of this study was to evaluate gas exchange and photochemical efficiency of cotton cultivars under leaf application of silicon. Therefore, the experiment was conducted in a completely randomized in a factorial 3 x 5, three cotton cultivars ('BRS Topazio', 'BRS Safira' and 'BRS Rubi'), five silicon concentrations (0, 50, 100, 150, 200 mg L-1) and four replications. Gas exchange and photochemical efficiency were determined by measuring the rate of CO2 assimilation, transpiration, stomatal conductance, internal CO2 concentration, instantaneous efficiency in water use, instantaneous carboxylation efficiency, initial fluorescence, maximum quantum efficiency of the variable and photosystem II (PSII). The data variables were subjected to analysis of variance and regression test comparison of means. There were significant differences in gas exchange and photochemical efficiency in response to concentrations of silicon. There were also significant differences among cotton cultivars evaluated. In cultivar 'BRS Top zio', the application of silicon increased CO2 assimilation rate and quantum efficiency of PSII. In 'BRS Safira' silicon reduced the rate of assimilation and internal CO2 concentration. In 'BRS Rubi' element increased the fluorescence of chlorophyll 'a' and quantum efficiency of photosystem II, and reduced the rate of assimilation and internal CO2 concentration and stomatal conductance. Silicate fertilization provided 'BRS Topazio' to express better photosynthetic rate in relation to 'BRS Safira' and 'BRS Rubi'. No damage occurred in PSII when 'BRS Top zio', 'BRS Safira' and 'BRS Rubi' cultivars received silicon as supplementary nutrition.
Resumo:
This study aims to assess the implementation of Lean Six Sigma in the preparation of plates and hot lamination process for a company of aluminum rolled products, to improve the quality, productivity and process efficiency. As a basis for achieving these goals, the DMAIC methodology and various quality tools such as Cause Effect Diagram, Process Flow, SIPOC, Pareto, FMEA and Control Chart were used, trying to propose improvements to processes and increase their efficiency. The results were significant and were the basis for the continuation of a continuous improvement project throughout the factory
Resumo:
In wood processing industries, which use electrical equipment in the production process, in most cases these are badly scaled or operate under inadequate conditions, resulting directly in industrial energy efficiency, which proves important because besides having technological innovation, also with practices and policies, aims to decrease power consumption. So in a wiring project should take into account the variables that influence energy efficiency. Thus this work has been reviewed and subsequently calculated some of these variables, such as active power, power factor and demand for the entire industry (global) and also for specific equipment, the chipper. The network analysis was performed in a wood processing industry in the city of Taquarivaí - SP, and evaluated these variables with a network analyzer and also by analysis on energy bills, which were found in both analysis levels below those found in literature. These factors are due to poor design, improper use, storage of equipment or even by characteristic of the production process, ie, the equipment running on empty because of the volatility of production
Resumo:
O estudo foi realizado numa área degradada pertencente ao campus da UNESP em Rio Claro, e teve como objetivo avaliar a eficiência do método de nucleação para recuperação de áreas degradadas do tipo “transposição de galharia” na atração de fauna. As pilhas de galhos podem funcionar como abrigos artificiais, atraindo potenciais dispersores de sementes secundários, o que potencialmente abreviaria o processo de regeneração de um ambiente degradado. O estudo foi feito através do levantamento de pequenos mamíferos por armadilhas de interceptação e queda em quatro parcelas de 2500 m², sendo duas delas com o tratamento (pilhas de galhos), e duas funcionando como controle, e o resultado esperado seria uma maior quantidade de indivíduos capturados e de gêneros taxonômicos nas parcelas com o tratamento. Entretanto, as quantidades totais de indivíduos capturados no bloco das parcelas com tratamento e no bloco das parcelas controle foram, segundo o teste de Mann-Whitman, estatisticamente idênticos. Também a quantidade de gêneros taxonômicos capturados foi igual nos dois blocos. Desta forma, concluímos que o método “transposição de galharia” foi ineficiente neste estudo, da forma como foi empregado, não contribuindo para um aumento na fauna de pequenos roedores e marsupiais. O método pode ter fracassado devido a pequena quantidade de pilhas de galhos utilizados para o tamanho da área, como também pelo recobrimento da área por uma grande quantidade de gramíneas, que podem ter funcionado por si só como abrigo para os animais capturados, além de poderinibir a entrada de outros gêneros de pequenos mamíferos não-voadores. Sugerimos portanto, para o método ser mais eficiente, a colocação de uma maior quantidade de pilhas de galhos do que a utilizada no presente estudo, e elas devem ser maiores. Para ecossistemas que apresentam gramíneas densas e altas... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
The discussions about the energy rationalization are gaining more and more space on the everyday of engineers and other professionals in the field of energy. A greater focus is being tied to commercial buildings, because they are one of the biggest responsible for the high energetic expenditure according to the National Energetic Balance, especially by the use of air conditioners for the people’s thermal comfort. Such finding made INMETRO to develop a building labeling procedure through th National Program of Electric Energy Conservation in Buildings; by means of this systematic, the built areas are classified by levels that go from A(the best) to E(the worst), taking into account envelopment, illumination system and air conditioning. A bonus process based on water rationalization, use of renewable energy sources, cogeneration systems or technical innovations, allows the classification to be changed up to one level. A study made exactly on a commercial building, the building of Foundation for Technological and Scientific Development located inside of the College of Engineering of Guaratinguetá, sought to identify technical/economic alternatives for the building certification and appealed to the bonus based on water rationalization. The present study is based on analysis of deploying a cogeneration system formed by internal combustion engine and an absorption refrigeration system as bonus alternative, so that the costs are analyzed regarding energy consumption and use of the motor. With the calculations and results, the viability of the building to receive a bonus from INMETRO through its National Program for Energy Conservation in Buildings is studied and concluded from this study whether or not you can get a better level of energy efficiency for the building in question... (Complete abstract click electronic access below)