Analysis of postprandial lipemia as a Cardiovascular Disease risk factor using genetic and clinical information: an Artificial Neural Network perspective

Clinical studies indicate that exaggerated postprandial lipemia is linked to the progression of atherosclerosis, leading cause of Cardiovascular Diseases (CVD). CVD is a multi-factorial disease with complex etiology and according to the literature postprandial Triglycerides (TG) can be used as an independent CVD risk factor. Aim of the current study is to construct an Artificial Neural Network (ANN) based system for the identification of the most important gene-gene and/or gene-environmental interactions that contribute to a fast or slow postprandial metabolism of TG in blood and consequently to investigate the causality of postprandial TG response. The design and development of the system is based on a dataset of 213 subjects who underwent a two meals fatty prandial protocol. For each of the subjects a total of 30 input variables corresponding to genetic variations, sex, age and fasting levels of clinical measurements were known. Those variables provide input to the system, which is based on the combined use of Parameter Decreasing Method (PDM) and an ANN. The system was able to identify the ten (10) most informative variables and achieve a mean accuracy equal to 85.21%.

Software Engineering and eLearning: The MuSofT Project

eLearning supports the education in certain disciplines. Here, we report about novel eLearning concepts, techniques, and tools to support education in Software Engineering, a subdiscipline of computer science. We call this "Software Engineering eLearning". On the other side, software support is a substantial prerequisite for eLearning in any discipline. Thus, Software Engineering techniques have to be applied to develop and maintain those software systems. We call this "eLearning Software Engineering". Both aspects have been investigated in a large joint, BMBF-funded research project, termed MuSofT (Multimedia in Software Engineering). The main results are summarized in this paper.

Climate Engineering: gesellschaftliches Konfliktpotenzial und öffentliche Partizipationsmöglichkeiten

Aufbauend auf den Ergebnissen einer Literatur- und Medienanalyse wurde erstmals zum Thema Climate Engineering ein sogenanntes Gruppen-Delphi durchgeführt, um aktuelle und argumentativ fundierte Einschätzungen von Experten zu den möglichen sozialen und kulturellen Folgen von Climate Engineering, insbesondere auch in Deutschland, zu erhalten. Die Ergebnisse dieser diskursiven Form der Expertenbefragung zeigen deutlich, dass die Verfahren des Climate Engineering differenziert betrachtet und bewertet werden müssen. Auf Akzeptanzprobleme stoßen vor allem Maßnahmen, bei denen hohe Unsicherheit über die potenziellen Nebenwirkungen besteht. In der Literatur und unter den Experten besteht Einigkeit darüber, dass es bereits jetzt, in der Frühphase der Entwicklung von Climate Engineering-Strategien, notwendig sei, die Bürger über diese Technologien und Strategien aufzuklären.

Proceedings of the Third Biochemical Engineering Symposium (April 28, 1973)

This report presents the proceedings of the Biochemical Engineering Symposium held at Kansas State University, April 28, 1973. Since a number of the contributions will be published in detail elsewhere, only brief summaries of each contribution are included here. Requests for additional information on projects conducted at The University of Nebraska should be directed to Dr. Peter J. Reilly, and those at Kansas State University to the editors. ContentsKenneth J. Jacobson, Andrew H.C. Chan, and Raymond C. Eliason, "Properties and Utilization of Small Particulates in Cattle Manure" Cady R. Engler and James S. Yohn, "Protein from Manure" Robert J. Williams, "Kinetics of Sucrose Inversion Using Invertase Immobilized on Hollow Fibers of Cellulose Acetate" David F. Aldis and Thomas A. Carlisle, "Study of a Triiodide-Resin Complex Disinfection System" John C. Heydweiller, "Modeling and Analysis of Symbiotic Growth" Kenneth J. Jacobson, "Synchronized Growth of the Blue Green Alga Microcystis aeruginosa" Clarence C. Y. Ron arui Lincoln L. S. Yang, "Computer Modeling of the Reductive Pentose Phosphate Cycle" Ming-ching T. Kuo, "Application of a Parallel Biochemical Oxidation Kinetic Model to the Design of an Activated Sludge System Including a Primary Clarifier" Prakash N. Mishra, "Optimal Synthesis of Water Renovation Systems"

Second Annual Kansas State–Nebraska Biochemical Engineering Symposium (April 29, 1972)

This booklet contains abstracts of papers presented at a biochemical engineering symposium conducted at the University of Nebraska-Lincoln on April 29, 1972. This was the second annual symposium on this subject, the first having been held at Kansas State University on June 4, 1971. It is expected that future symposia will alternate between the two campuses. ContentsS.H. Lin, Kansas State University, "Enzyme Reaction in a Tubular Reactor with Laminar Flow" Gregory C. Martin, University of Nebraska, "Estimation of Parameters in Population Models for Schizosaccharomyces pombe from Chemostat Data" Jaiprakash S. Shastry and Prakash N. Mishra, Kansas State University, "Immobilized Enzymes: Analysis of Ultrafiltration Reactors" Mark D. Young, University of Nebraska, "Modelling Unsteady-State Two-Species Data Using Ramkrishna's Staling Model" G.C.Y. Chu, Kansas State University, "Optimization of Step Aeration Waste Treatment Systems Using EVOP" Shinji Goto, University of Nebraska, "Growth of the Blue-Green Alga Microcytis aeruginosa under Defined Conditions" Prakash N. Mishra and Thomas M.C. Kuo, Kansas State University, "Digital Computer Simulation of the Activated Sludge System: Effect of Primary Clarifier on System Performance" Mark D. Young, University of Nebraska, "Aerobic Fermentation of Paunch Liquor"

Proceedings of the Ninth Annual Biochemical Engineering Symposium

This report presents the proceedings of the Biochemical Engineering Symposium held at Kansas State University, April 28, 1979. Since a number of the contributions will be published in detail elsewhere, only brief reports of each contribution are included here. Requests for further information on work at Iowa State University should be directed to Dr. Peter J. Reilly; at Colorado State University to Drs. V. G. Murphy and A. R. Moreira, and at Kansas State University to Drs. L. T. Fan and L. E. Erickson. ContentProperties of a Homogeneous Xylobiohydrolase from Aspergillus niger, Mary M. Frederick, Iowa State University Kinetic Studies on the Enzymatic Hydrolysis of Cellulose–Absorption and Desorption of Cellulase onto Cellulose and the Behavior of Absorbed Cellulase, Yong-Hyun Lee and L. T. Fan, Kansas State University Properties of a Homogeneous Endo-Xylanase from Aspergillus niger, Ricardo Fournier A., Iowa State University Solid State Fermentation of Manure Fibers, D. C. Ulmer, Colorado State University Analysis and Consistency of Experimental Data for Microbial Growth on Renewable Resources, B. 0. Solomon, Kansas State University Biochemical Mechanisms of Enzyme Regulation, Frederick A. Blum, Colorado State University An Evaluation of Cellulose Pretreatments for Enzymatic Hydrolysis, David H. Beardmore, Kansas State University Use of Immobilized 8-Amylase/Glucoamylase Mixtures to Produce High Maltose Syrups, Carol G. Bohnenkamp, Iowa State University Effect of Viscosity on Bubble Behavior in an Airlift Fermentor, Vasanti Deshpande, Kansas State University

Proceedings of the Twelfth Annual Biochemical Engineering Symposium

This work presents the proceedings of the twelfth symposium which was held at Kansas State University on April 24, 1982. Since a number of the contributions will be published in detail elsewhere, only brief reports are included here. Some of the reports describe current progress with respect to ongoing projects. Requests for further information should be directed to Dr. Peter Reilly at Iowa State University, Dr. V. G. Murphy at Colorado State University, Dr. Rakesh Bajpai at University of Missouri, Dr. Ed Clausen at University of Arkansas, Dr. L. T. Fan and Dr. L. E. Erickson at Kansas State University. ContentsA Kinetic Analysis of Oleaginous Yeast Fermentation by Candida curvata on Whey Permeate, B.D. Brown and K.H. Hsu, Iowa State University Kinetics of Biofouling in Simulated Water Distribution Systems Using CSTR, T.M. Prakash, University of Missouri Kinetics of Gas Production by C. acetobutylicum, Michael Doremus, Colorado State University Large Scale Production of Methane from Agricultural Residues, O.P. Doyle, G.C. Magruder, E.C. Clausen, and J.L. Gaddy, University of Arkansas The Optimal Process Design for Enzymatic Hydrolysis of Wheat Straw, M.M Gharpuray and L.T. Fan, Kansas State University Extractive Butanol Fermentation, Michael Sierks, Colorado State University Yields Associated with Ethyl Alcohol Production, M.D. Oner, Kansas State University Estimation of Growth Yield and Maintenance Parameters for Microbial Growth on Corn Dust, B.O. Solomon, Kansas State University Milling of Ensiled Corn, Andrzej Neryng, Iowa State University Protein Extraction from Alfalfa, Ravidranath Joshi, Colorado State University Analysis of Disaccharides by Capillary Gas Chromatography, Z.L. Nikolov, Iowa State University Characterization of High Viscosity Fermentations in Tower Fermentors, S.A. Patel and C.H. Lee, Kansas State University Utilization of Sugars in Sorghum Molasses by Clostridium acetobutylicum B. Hong, K.C. Shin, and L.T. Fan, Kansas State University

Proceedings of the Eleventh Annual Biochemical Engineering Symposium

This is the eleventh in a series of symposia devoted to talks by students on their biochemical engineering research. The first, third, fifth, and ninth were at Kansas State University in Manhattan; the second and fourth were at the University of Nebraska–Lincoln; the sixth was in Kansas City in conjunction with the 8lst American Institute of Chemical Engineers National Meeting; the seventh and the tenth were at Iowa State University in Ames; and the eighth was held at the University of Missouri–Columbia. ContentsPretreatment of Wheat Straw for Cellulose Hydrolysis, M. M. Gharpuray, Yong-Hyun Lee, and L. T. Fan, Kansas State University Sugar Production During Autohydrolysis of Wheat Straw, Robert A. Lewis, Colorado State University An Alkaline Copper Reagent for Use in Automated Analysis, Alfred R. Fratzke, Iowa State University Sugars Produced During Extrusion Processing of Corn, Ruth S. Korn, Colorado State University Characterization and Comparison of Renewable Energy Resources, Snehal A. Patel, Kansas State University Anaerobic Digestion of Alcohol Stillage, Laureen K. Binder, Colorado State University Estimation of Growth Yield and Maintenance Parameters, Bamidele 0. Solomon and Mehmet D. Oner, Kansas State University Immobilization of Glucoamylase Using TiCl4 and Organic Titanates, Robert E. Lesch, Iowa State University Solvent Toxicity in the Acetone-Butanol Fermentation, Jeanine M. Costa, Colorado State University

Finite element analysis for prediction of bone strength

Article preview View full access options BoneKEy Reports | Review Print Email Share/bookmark Finite element analysis for prediction of bone strength Philippe K Zysset, Enrico Dall'Ara, Peter Varga & Dieter H Pahr Affiliations Corresponding author BoneKEy Reports (2013) 2, Article number: 386 (2013) doi:10.1038/bonekey.2013.120 Received 03 January 2013 Accepted 25 June 2013 Published online 07 August 2013 Article tools Citation Reprints Rights & permissions Abstract Abstract• References• Author information Finite element (FE) analysis has been applied for the past 40 years to simulate the mechanical behavior of bone. Although several validation studies have been performed on specific anatomical sites and load cases, this study aims to review the predictability of human bone strength at the three major osteoporotic fracture sites quantified in recently completed in vitro studies at our former institute. Specifically, the performance of FE analysis based on clinical computer tomography (QCT) is compared with the ones of the current densitometric standards, bone mineral content, bone mineral density (BMD) and areal BMD (aBMD). Clinical fractures were produced in monotonic axial compression of the distal radii, vertebral sections and in side loading of the proximal femora. QCT-based FE models of the three bones were developed to simulate as closely as possible the boundary conditions of each experiment. For all sites, the FE methodology exhibited the lowest errors and the highest correlations in predicting the experimental bone strength. Likely due to the improved CT image resolution, the quality of the FE prediction in the peripheral skeleton using high-resolution peripheral CT was superior to that in the axial skeleton with whole-body QCT. Because of its projective and scalar nature, the performance of aBMD in predicting bone strength depended on loading mode and was significantly inferior to FE in axial compression of radial or vertebral sections but not significantly inferior to FE in side loading of the femur. Considering the cumulated evidence from the published validation studies, it is concluded that FE models provide the most reliable surrogates of bone strength at any of the three fracture sites.

High resolution quantitative computed tomography-based assessment of trabecular microstructure and strength estimates by finite-element analysis of the spine, but not DXA, reflects vertebral fracture status in men with glucocorticoid-induced osteoporosis

High-resolution quantitative computed tomography (HRQCT)-based analysis of spinal bone density and microstructure, finite element analysis (FEA), and DXA were used to investigate the vertebral bone status of men with glucocorticoid-induced osteoporosis (GIO). DXA of L1–L3 and total hip, QCT of L1–L3, and HRQCT of T12 were available for 73 men (54.6±14.0years) with GIO. Prevalent vertebral fracture status was evaluated on radiographs using a semi-quantitative (SQ) score (normal=0 to severe fracture=3), and the spinal deformity index (SDI) score (sum of SQ scores of T4 to L4 vertebrae). Thirty-one (42.4%) subjects had prevalent vertebral fractures. Cortical BMD (Ct.BMD) and thickness (Ct.Th), trabecular BMD (Tb.BMD), apparent trabecular bone volume fraction (app.BV/TV), and apparent trabecular separation (app.Tb.Sp) were analyzed by HRQCT. Stiffness and strength of T12 were computed by HRQCT-based nonlinear FEA for axial compression, anterior bending and axial torsion. In logistic regressions adjusted for age, glucocorticoid dose and osteoporosis treatment, Tb.BMD was most closely associated with vertebral fracture status (standardized odds ratio [sOR]: Tb.BMD T12: 4.05 [95% CI: 1.8–9.0], Tb.BMD L1–L3: 3.95 [1.8–8.9]). Strength divided by cross-sectional area for axial compression showed the most significant association with spine fracture status among FEA variables (2.56 [1.29–5.07]). SDI was best predicted by a microstructural model using Ct.Th and app.Tb.Sp (r2=0.57, p<0.001). Spinal or hip DXA measurements did not show significant associations with fracture status or severity. In this cross-sectional study of males with GIO, QCT, HRQCT-based measurements and FEA variables were superior to DXA in discriminating between patients of differing prevalent vertebral fracture status. A microstructural model combining aspects of cortical and trabecular bone reflected fracture severity most accurately.

Analysis of polygonal cracking patterns in chloride-bearing terrains on Mars: Indicators of ancient playa settings

The ancient southern highlands on Mars (~3.5 Gyr old) contain > 600 regions that display spectral evidence in the infrared for the presence of chloride-bearing materials. Many of these locations were previously reported to display polygonal cracking patterns. We studied more than 80 of the chloride-bearing terrains using high-resolution (0.25-0.5 m/pixel) images, as well as near-infrared spectral data, to characterize the surface textures and the associated cracking patterns and mineralogies. Our study indicates that ~75% of the studied locations display polygonal cracks that resemble desiccation cracks, while some resemble salt expansion/thrust polygons. Furthermore, we detect, spectrally, the presence of smectites in association with ~30% of the studied fractured terrains. We note that smectites are a special class of swelling clay minerals that can induce formation of large desiccation cracks. As such, we suggest that the cracking patterns are indicative of the presence of smectite phyllosilicates even in the absence of spectral confirmation. Our results suggest that many chloride-bearing terrains have a lacustrine origin and a geologic setting similar to playas on Earth. Such locations would have contained ephemeral lakes that may have undergone repeated cycles of desiccation and recharging by a near-surface fluctuating water table in order to account for the salt-phyllosilicates associations. These results have notable implications for the ancient hydrology of Mars. We propose that the morphologies and sizes of the polygonal cracks can be used as paleoenvironmental, as well as lithological, indicators that could be helpful in planning future missions.

Observations of the northern seasonal polar cap on Mars II: HiRISE photometric analysis of evolution of northern polar dunes in spring

We present an overview of our analyses of HiRISE observations of spring evolution of selected dune areas of the north polar erg. The north polar erg is covered annually by seasonal volatile ice layer, a mixture of CO2 and H2O with mineral dust contamination. In spring, this layer sublimes creating visually enigmatic phenomena, e.g. dark and bright fan-shaped deposits, dark–bright–dark bandings, dark down-slope streaks, and seasonal polygonal cracks. Similar phenomena in southern polar areas are believed to be related to the specific process of solid-state greenhouse effect. In the north, it is currently unclear if the solid-state greenhouse effect is able to explain all the observed phenomena especially because the increased influence of H2O on the time scales of this process has not yet been quantified. HiRISE observations of our selected locations show that the ground exhibits a temporal behaviour similar to the one observed in the southern polar areas: a brightening phase starting close to the spring equinox with a subsequent darkening towards summer solstice. The resolution of HiRISE enabled us to study dunes and substrate individually and even distinguish between different developments on windward and slip face sides of single dunes. Differences in the seasonal evolution between steep slip faces and flatter substrate and windward sides of dunes have been identified and compared to CRISM data of CO2 and H2O distributions on dunes. We also observe small scale dark blotches that appear in early observations and tend to sustain a low reflectivity throughout the spring. These blotches can be regarded as the analogue of dark fan deposits in southern polar areas, leading us to the conclusion that both martian polar areas follow similar spring evolutions.

Application of Cognitive Engineering Principles to the Redesign of a Dichotomous Identification Key for Parasitology

Dichotomous identification keys are used throughout biology for identification of plants, insects, and parasites. However, correct use of identification keys can be difficult as they are not usually intended for novice users who may not be familiar with the terminology used or with the morphology of the organism being identified. Therefore, we applied cognitive engineering principles to redesign a parasitology identification key for the Internet. We addressed issues of visual clutter and spatial distance by displaying a single question couplet at a time and by switching to the appropriate next couplet after the user made a choice. Our analysis of the original paper-based key versus the Web-based approach found that of 26 applicable cognitive engineering principles, the paper key did not meet 4 (15%) and partially met 11 (42%). In contrast, the redesigned key met 100% of 32 applicable cognitive engineering principles.

A reverse crystal Engineering approach

The enormous impact of crystal engineering in modern solid state chemistry takes advantage from the connection between a typical basic science field and the word engineering. Regrettably, the engineering aspect of organic or metal organic crystalline materials are limited, so far, to descriptive structural features, sometime entangled with topological aspects, but only rarely with true material design. This should include not only the fabrication and structural description at micro- and nano-scopic level of the solids, but also a proper reverse engineering, a fundamental discipline for engineers. Translated into scientific language, the reverse crystal engineering refers to a dedicated and accurate analysis of how the building blocks contribute to generate a given material property. This would enable a more appropriate design of new crystalline material. We propose here the application of reverse crystal engineering to optical properties of organic and metal organic framework structures, applying the distributed atomic polarizability approach that we have extensively investigated in the past few years[1,2].