929 resultados para Dripping irrigation
Resumo:
The authors report the surgical procedure in two patients with pseudomyxoma peritonei, histologically considered as mucinous adenocarcinoma. In both patients, intestinal loops and other visceras were blocked and it was not possible to localize the tumor's origin. There was, in both cases, a great volume of mucinous ascitis. In the first patient a laparotomy was performed and a drainage by a five centimeters peritoneostomy in the abdominal upper left quadrant. In the second just a peritoneostomy was performed in the same location. The sequential irrigation of the abdominal cavity controlled the ascitis in a few days. Certainly this approach avoided a second procedure to clean the mucinous ascitis.
Resumo:
We describe the case of a 54 year old woman seen with an esophageal mass diagnosed as a primary esophageal lymphoma. The main symptom was dysphagia of seven months duration. The treatment consisted in resection of the tumor, and reconstruction of the defect with a reversed pleural flap, followed by a chemotherapy regimen that consisted of five drugs, cyclophosphamid, prednisone, doxorubicin, rituximab and vincristine (R-CHOP). The patient developed an esophageal pleural fistula treated with pleural drainage and irrigation that closed in 45 days. Two and one half years later she is doing well and disease free.
Resumo:
The irrigation is a technique developed to supply the hydric needs of the plants. The use of the water should be optimized so that the culture just has enough for its growth, avoiding waste. The objective of this work was to characterize the behavior of capacitive sensors of humidity to monitor the moisture in the soils. In first instance, it was appraised sensors with dielectric built of synthetic pomes stone (Rd = 0,4 and Rd = 0,8) and of soil samples (Rd = 0,8 and Rd = 1,0), being the Rd parameter a geometric factor that relates the distance between the capacitor plates with radius of the plates. For the calibration, the sensors were installed in PVC recipient of cylindrical shape, filled with soil. The set (sensor and soil) was humidified by capillary effect and submitted by a natural drying very slowly. The parameter readings were taken daily, which allowed obtain the curves relating the humidity percentage, expressed in terms of dry weight, with the output voltage fort the sensor. The experiments were performed in sand soil and in dark red latossolo. The obtained results allowed to infer that the behavior of the sensor has a specific feature for each type of soil, being, therefore, necessary to develop a own calibration curve for the sensor, when used in soil with specific characteristic.
Resumo:
The objective of this work was to evaluate the influence of weeding frequency on cultivar Centralmex green corn yield. Two experiments were conducted in Mossoró-RN (Brazil), with the use of sprinkler irrigation. A random block design with four replicates was used. It was observed that the total number and weight (TW) of unhusked green ears, the number and weight of marketable unhusked ears and the number and weight of marketable husked ears were reduced under no weeding treatment. The number timing of weedings did not influence green corn yield, except for one weeding at 60 DAP, which was equivalent to the "no weeding" treatment, for TW. When maize is marketed considering the total number of green ears, higher net income is obtained when one weeding is carried out 45 days after planting.
Resumo:
From 2003 to 2007, a field study was performed in a vineyard in Chile to investigate diuron and simazine soil behavior and the effect of additional rainfall. Both herbicides were applied once a year at a rate of 2.0 kg ha-1 a.i. Herbicide concentrations in soil were measured at 0, 10, 20, 40, 90 and 340 days after application, under two pluviometric conditions, natural rainfall and natural rainfall plus irrigation with 180 mm of simulated rainfall during the first 90 days after application. Soil partition coefficient (Kd) varied in the soil profile (0 to 90 cm deep) from 6.75 to 2.04 mL g-1 and from 1.4 to 0.66 mL g-1 and the maximum soil adsorption capacity was approximately 18.3 mg g-1 and 8.3 mg g-1 for diuron and simazine, respectively. Diuron and simazine reached up to 90 and 120 cm of soil depth, with an average of 8.3% and 62.4% of herbicide moved below 15 cm in the soil, respectively. Simazine soil half-life (DT50) was 38.1 days and 7.5 days, whereas the half life for diuron varied from 68.0 and 24.6 for natural rainfall and irrigated, respectively. The average of residual simazine remaining in the whole soil profile after 90 DAA was 25.4% and 39.9% for diuron, with no effect of additional rainfall amount. At 340 DAA the amount of simazine in the whole soil profile corresponded to 13.2% of the initial amount applied, being diuron more persistent with 21.5% of the initial herbicide applied. The high movement in soil of both herbicides could be due to a non-equilibrium sorption process explained by preferential flow, low Kd and high desorption.
Resumo:
Sorghum, pearl millet, and Brachiaria ruziziensis have similar characteristics which have led to their use for mulch formation in no-till systems. This study was carried out to evaluate the potential of these three species as straw suppliers to suppress weed emergence. Initial findings led to the conclusion that both pearl millet and Brachiaria ruziziensis have similar or superior potential as weed suppressors, compared to sorghum straw, a species with recognized allelopathic potential. Subsequently, new trials were conducted under greenhouse conditions by sowing weed species in pots, followed by covering of the soil with the straw under evaluation. Independent experiments were conducted for Euphorbia heterophylla and Bidens pilosa. In each experiment, the factors analyzed were type of straw (pearl millet and B. ruziziensis), amount of straw (equivalent to 4 and 8 t ha-1 dry mass) and irrigation method (surface and subsurface). Both pearl millet and B. ruziziensis have shown to be species that can be cultivated to produce straw with allelopathic potential. These effects were effective in suppressing the emergence or early growth of E. heterophylla and B. pilosa. There was no difference in the suppression of emergence of these species when the soil cover level was alternated between 4 and 8 t ha-1 dry mass.
Resumo:
Two experiments were carried out to evaluate soil persistence of chlorimuron-ethyl and metsulfuron-methyl and phytotoxicity to corn seeded as a succeeding crop. One experiment was conducted with chlorimuron-ethyl applied at 20 g ha-1, and one with metsulfuron-methyl applied at 3.96 g ha-1. Treatments were arranged in a factorial design with two types of soil (sandy and clay), three irrigation regimes (daily, weekly and no irrigation) and four application timings (90, 60 and 30 days before corn seeding, as well as untreated plots). Soil persistence of the herbicides was influenced by water availability, molecule water solubility (leaching potential) and application timings prior to corn seeding. In sandy soil, with adequate water availability, leaching probably had the greatest influence, reducing the persistence of the products, and consequently allowing less time between product application and corn seeding. In clay soil, microbial degradation was probably more important, because it was assumed that the lesser time available for microorganism activity, the lesser the damage was observed for corn, as long as the crop had enough water availability. Metsulfuron-methyl was the least phytotoxic herbicide, possibly as a result of the properties of its molecule and its higher leaching potential.
Resumo:
ABSTRACTThe raw sugarcane harvesting system has changed the dynamics of weed tillage for this crop, changing the predominant weed species and providing a barrier between the herbicide and the soil. Thus, this study has aimed to assess the influence of precipitation and sugarcane straw in the aminocyclopyrachlor and indaziflam herbicides control efficiency for the species Ipomoea trilobaand Euphorbia heterophylla. There were two trials, one for aminocyclopyrachlor and one for the indaziflam, both in the greenhouse at the campus of Faculdade Integrado in the Brazilian city of Campo Mourão, PR. Each experiment consisted of eight treatments with four replications. The treatments consisted of the combination of the presence of straw (10 t ha-1), capillary irrigation and rainfall simulation (20 mm). Assessments of control percentage of I.triloba and E.heterophylla were carried out, as well as the number of plants per pot. The aminocyclopyrachlor and indaziflam herbicides applied directly to the soil were efficient in controlling these species. The 20 mm rainfall simulation or daily irrigation on the straw are indispensable to promote the removal of aminocyclopyrachlor and indaziflam from the straw and provide satisfactory control of I.triloba and E.heterophylla.
Resumo:
T. absinthioides, Inuleae, Compositae, is a weedy species that is spreading in the irrigation area of the Colorado River, Argentina. This species can be found in normal and saline soils. Morphological and anatomical variables were measured with two salts, sodium chloride and sodium sulfate, with three levels of osmotic potential -0.4, -0.8 and -1.5 MPa, in hydroponic culture, using Hoagland solution as the cultivation media. The total diameter of the roots of plants growing in Na2SO4 and NaCl increased when the osmotic potential was -0.4 MPa. In plants growing in NaCl this may have resulted from the increase in the size of the cortical cells and in plants growing in Na2SO4, the diameter increased may be due to an increase in the cambial activity. The number and length of shoot internodes decreased with increasing salinity, even though this was not statistically significant. In comparison to the control, the total diameter of the shoot increased at -0.4 MPa and decreased with the reduction of the osmotic potential. In comparison to the control, the length of the leaves decreased at -0.4 MPa and the leaves width increased at the same concentration. The palisade parenchyma appeared less developed in saline conditions. In comparison to the control, the number of hairs increased at -0.4 MPa. T. absinthioides acts as a semihalophytic species, according to the salt ranks it tolerates. The mechanisms of adaptation to saline conditions are succulence in root and stunted growth if the salt in the media is NaCl, and the production of haloxeromorphic characters if the salt in the media is Na2 SO4
Resumo:
The driving forces for current research of flame retardants are increased fire safety in combination with flame retardant formulations that fulfill the criteria of sustainable production and products. In recent years, important questions about the environmental safety of antimony, and in particular, brominated flame retardants have been raised. As a consequence of this, the current doctoral thesis work describes efforts to develop new halogen-free flame retardants that are based on various radical generators and phosphorous compounds. The investigation was first focused on compounds that are capable of generating alkyl radicals in order to study their role on flame retardancy of polypropylene. The family of azoalkanes was selected as the cleanest and most convenient source of free alkyl radicals. Therefore, a number of symmetrical and unsymmetrical azoalkanes of the general formula R-N=N-R’ were prepared. The experimental results show that in the series of different sized azocycloalkanes the flame retardant efficacy decreased in the following order: R = R´= cyclohexyl > cyclopentyl > cyclobutyl > cyclooctanyl > cyclododecanyl. However, in the series of aliphatic azoalkanes compounds, the efficacy decreased as followed: R = R´= n-alkyl > tert-butyl > tert-octyl. The most striking difference in flame retardant efficacy was observed in thick polypropylene plaques of 1 mm, e.g. azocyclohexane (AZO) had a much better flame retardant performance than did the commercial reference FR (Flamestab® NOR116) in thick PP sections. In addition, some of the prepared azoalkane flame retardants e.g. 4’4- bis(cyclohexylazocyclohexyl) methane (BISAZO) exhibited non-burning dripping behavior. Extrusion coating experiments of flame retarded low density polyethylene (LDPE) onto a standard machine finished Kraft paper were carried out in order to investigate the potential of azoalkanes in multilayer facings. The results show that azocyclohexane (AZO) and 4’4-bis (cyclohexylazocyclohexyl) methane (BISAZO) can significantly improve the flame retardant properties of low density polyethylene coated paper already at 0.5 wt.% loadings, provided that the maximum extrusion temperature of 260 oC is not exceeded and coating weight is kept low at 13 g/m2. In addition, various triazene-based flame retardants (RN1=N2-N3R’R’’) were prepared. For example, polypropylene samples containing a very low concentration of only 0.5 wt.% of bis- 4’4’-(3’3’-dimethyltriazene) diphenyl ether and other triazenes passed the DIN 4102-1 test with B2 classification. It is noteworthy that no burning dripping could be detected and the average burning times were very short with exceptionally low weight losses. Therefore, triazene compounds constitute a new and interesting family of radical generators for flame retarding of polymeric materials. The high flame retardant potential of triazenes can be attributed to their ability to generate various types of radicals during their thermal decomposition. According to thermogravimetric analysis/Fourier transform infrared spectroscopy/MS analysis, triazene units are homolytically cleaved into various aminyl, resonance-stabilized aryl radicals, and different CH fragments with simultaneous evolution of elemental nitrogen. Furthermore, the potential of thirteen aliphatic, aromatic, thiuram and heterocyclic substituted organic disulfide derivatives of the general formula R-S-S-R’ as a new group of halogen-free flame retardants for polypropylene films have been investigated. According to the DIN 4102- 1 standard ignitibility test, for the first time it has been demonstrated that many of the disulfides alone can effectively provide flame retardancy and self-extinguishing properties to polypropylene films at already very low concentrations of 0.5 wt.%. For the disulfide family, the highest FR activity was recorded for 5’5’-dithiobis (2-nitrobenzoic acid). Very low values for burning length (53 mm) and burning time (10 s) reflect significantly increased fire retardant performance of this disulfide compared to other compounds in this series as well as to Flamestab® NOR116. Finally, two new, phosphorus-based flame retardants were synthesized: P’P-diphenyl phosphinic hydrazide (PAH) and melamine phenyl phosphonate (MPhP). The DIN 4102-1 test and the more stringent UL94 vertical burning test (UL94 V) were used to assess the formulations ability to extinguish a flame once ignited. A very strong synergistic effect with azoalkanes was found, i.e. in combination with these radical generators even UL94 V0 rate could be obtained.
Resumo:
Tässä työssä tutkitaan suotoveden käsittelyä käyttämällä sitä kierrätysmateriaaleista valmistetussa tuhkamullassa loppusijoitusalueen päällä kasvatettavan energiapuukasvuston kasteluun. Kyseisen toimintamallin tarkoituksena on haihduttaa suotovettä energiapuiden avulla sekä sitouttaa ravinteita ja haitta-aineita sekä kasvustoon että kasvualustaan. Tavoitteena on selvittää toimintamallin hyödyntämiskelpoisuus ja tehokkuus suotovesien käsittelymenetelmänä sekä kastelun vaikutukset energiapuun kasvuun. Työssä suoritettiin kesän ja syksyn 2014 aikana energiapuun kastelukoe Mustankorkea Oy:n jätteenkäsittelykeskuksen alueella Jyväskylässä. Kokeessa loppusijoitusalueen päälle istutettuja eri kasvuvaiheissa olevia energiapajukasvustoja sekä hybridihaapakasvustoa kasteltiin jätetäytön suotovedellä. Kokeessa käytettiin kasvualustoina tuhkamultaa, joka oli valmistettu tuhkasta, kompostista ja ylijäämämaa- aineksesta, sekä kompostia. Kasteluveden, valumavesien, kasvualustojen ja pajukasvuston ominaisuuksia seurattiin kokeen aikana analyysien avulla. Lisäksi alueen vesitaseen selvittämiseksi suoritettiin lysimetrikokeet, joissa lysimetreihin istutettuja pajuja kasteltiin suotovedellä sekä hanavedellä. Tulosten perusteella suotovesikastelu lisäsi sekä pajun että haavan kasvua. Kastelu lisäsi pajun ravinnepitoisuuksia. Se myös heikensi hieman pajun poltto-ominaisuuksia. Kasvualustan ominaisuuksiin kastelulla ei havaittu olevan vaikutuksia. Kastelumäärä, jota voidaan käyttää ilman valumia, on kokeen perusteella n. 100–600 mm/kasvukausi käytetyllä kastelujärjestelmällä. Kastelujärjestelmää kehittämällä on kuitenkin luultavasti mahdollista lisätä haihduntaa ja siten kastelumäärää merkittävästi.
Resumo:
Water geochemistry is a very important tool for studying the water quality in a given area. Geology and climate are the major natural factors controlling the chemistry of most natural waters. Anthropogenic impacts are the secondary sources of contamination in natural waters. This study presents the first integrative approach to the geochemistry and water quality of surface waters and Lake Qarun in the Fayoum catchment, Egypt. Moreover, geochemical modeling of Lake Qarun was firstly presented. The Nile River is the main source of water to the Fayoum watershed. To investigate the quality and geochemistry of this water, water samples from irrigation canals, drains and Lake Qarun were collected during the period 2010‒2013 from the whole Fayoum drainage basin to address the major processes and factors governing the evolution of water chemistry in the investigation area. About 34 physicochemical quality parameters, including major ions, oxygen isotopes, trace elements, nutrients and microbiological parameters were investigated in the water samples. Multivariable statistical analysis was used to interpret the interrelationship between the different studied parameters. Geochemical modeling of Lake Qarun was carried out using Hardie and Eugster’s evolutionary model and a model simulated by PHREEQC software. The crystallization sequence during evaporation of Lake Qarun brine was also studied using a Jänecke phase diagram involving the system Na‒K‒Mg‒ Cl‒SO4‒H2O. The results show that the chemistry of surface water in the Fayoum catchment evolves from Ca- Mg-HCO3 at the head waters to Ca‒Mg‒Cl‒SO4 and eventually to Na‒Cl downstream and at Lake Qarun. The main processes behind the high levels of Na, SO4 and Cl in downstream waters and in Lake Qarun are dissolution of evaporites from Fayoum soils followed by evapoconcentration. This was confirmed by binary plots between the different ions, Piper plot, Gibb’s plot and δ18O results. The modeled data proved that Lake Qarun brine evolves from drainage waters via an evaporation‒crystallization process. Through the precipitation of calcite and gypsum, the solution should reach the final composition "Na–Mg–SO4–Cl". As simulated by PHREEQC, further evaporation of lake brine can drive halite to precipitate in the final stages of evaporation. Significantly, the crystallization sequence during evaporation of the lake brine at the concentration ponds of the Egyptian Salts and Minerals Company (EMISAL) reflected the findings from both Hardie and Eugster’s evolutionary model and the PHREEQC simulated model. After crystallization of halite at the EMISAL ponds, the crystallization sequence during evaporation of the residual brine (bittern) was investigated using a Jänecke phase diagram at 35 °C. This diagram was more useful than PHREEQC for predicting the evaporation path especially in the case of this highly concentrated brine (bittern). The predicted crystallization path using a Jänecke phase diagram at 35 °C showed that halite, hexahydrite, kainite and kieserite should appear during bittern evaporation. Yet the actual crystallized mineral salts were only halite and hexahydrite. The absence of kainite was due to its metastability while the absence of kieserite was due to opposed relative humidity. The presence of a specific MgSO4.nH2O phase in ancient evaporite deposits can be used as a paleoclimatic indicator. Evaluation of surface water quality for agricultural purposes shows that some irrigation waters and all drainage waters have high salinities and therefore cannot be used for irrigation. Waters from irrigation canals used as a drinking water supply show higher concentrations of Al and suffer from high levels of total coliform (TC), fecal coliform (FC) and fecal streptococcus (FS). These waters cannot be used for drinking or agricultural purposes without treatment, because of their high health risk. Therefore it is crucial that environmental protection agencies and the media increase public awareness of this issue, especially in rural areas.
Resumo:
The purpose of this study is to evaluate the hygienic-sanitary quality of vegetables and irrigation water and assess the effectiveness of lemon juice and vinegar in reducing E. coli strains inoculated on lettuce. One hundred and forty samples of vegetables and 45 samples of irrigation water were investigated for thermotolerant coliforms and Salmonella spp. In order to verify the effectiveness of natural household sanitizers in reducing E. coli in inoculated lettuce, four treatment solutions were tested: fresh lemon juice, alcohol vinegar, lemon juice-vinegar mixture, and lemon juice-vinegar-water mixture. The microbiological analysis revealed high rates of contamination by thermotolerant coliforms and identified the presence of E. coli in 32% of the tested vegetable samples and 56% of the water samples. While no significant statistical difference (p < 0, 05) was identified in the tested solutions, the treatment with a combination of lemon juice and vinegar resulted in the highest Decimal Reductions (DR) of E. coli O157: H7 while the treatment with vinegar alone was the most effective against the indigenous E. coli strain
Resumo:
The main objective of seed coating technology using polymers is to improve the physical, physiological and sanitary characteristics of seed performance. The objectives of the present study were to determine: the plantability of corn seeds treated with insecticide, fungicide and graphite, covered with a film coating; the dust retention on treated corn seeds; and the leaching of applied products on corn seeds covered by a film coating. Seed plantability was determined by counting the skips and double seeds; dust was determined by using fiberglass paper in mg.100 g-1 of seeds; and the leaching was determined by collecting the material leached in a 10 cm layer of sand after irrigation. The following conclusions were made: seeds covered with film coating effectively reduce skips and double seeds; film coating effectively reduces the formation of dust from the seeds; film coated seeds minimize the leaching of the insecticide applied in seed treatment; and there are differences in effectiveness related to film coating type and dosage.
Resumo:
Comprend : Rapport présenté à la Chambre des Pairs, dans sa séance du 26 mars 1845, au nom d'une commission spéciale chargée de l'examen du projet de loi relatif aux irrigations