Protocol for a pilot randomised controlled trial of an intervention to increase the use of traffic light food labelling in UK shoppers (the FLICC trial)

Background: Traffic light labelling of foods—a system that incorporates a colour-coded assessment of the level of total fat, saturated fat, sugar and salt on the front of packaged foods—has been recommended by the UK Government and is currently in use or being phased in by many UK manufacturers and retailers. This paper describes a protocol for a pilot randomised controlled trial of an intervention designed to increase the use of traffic light labelling during real-life food purchase decisions.

Methods/design: The objectives of this two-arm randomised controlled pilot trial are to assess recruitment, retention and data completion rates, to generate potential effect size estimates to inform sample size calculations for the main trial and to assess the feasibility of conducting such a trial. Participants will be recruited by email from a loyalty card database of a UK supermarket chain. Eligible participants will be over 18 and regular shoppers who frequently purchase ready meals or pizzas. The intervention is informed by a review of previous interventions encouraging the use of nutrition labelling and the broader behaviour change literature. It is designed to impact on mechanisms affecting belief and behavioural intention formation as well as those associated with planning and goal setting and the adoption and maintenance of the behaviour of interest, namely traffic light label use during purchases of ready meals and pizzas. Data will be collected using electronic sales data via supermarket loyalty cards and web-based questionnaires and will be used to estimate the effect of the intervention on the nutrition profile of purchased ready meals and pizzas and the behavioural mechanisms associated with label use. Data collection will take place over 48 weeks. A process evaluation including semi-structured interviews and web analytics will be conducted to assess feasibility of a full trial.

Discussion: The design of the pilot trial allows for efficient recruitment and data collection. The intervention could be generalised to a wider population if shown to be feasible in the main trial.

An evaluation of portion size estimation aids precision, ease of use and likelihood of future use

OBJECTIVE: The present study aimed to evaluate the precision, ease of use and likelihood of future use of portion size estimation aids (PSEA).

DESIGN: A range of PSEA were used to estimate the serving sizes of a range of commonly eaten foods and rated for ease of use and likelihood of future usage.

SETTING: For each food, participants selected their preferred PSEA from a range of options including: quantities and measures; reference objects; measuring; and indicators on food packets. These PSEA were used to serve out various foods (e.g. liquid, amorphous, and composite dishes). Ease of use and likelihood of future use were noted. The foods were weighed to determine the precision of each PSEA.

SUBJECTS: Males and females aged 18-64 years (n 120).

RESULTS: The quantities and measures were the most precise PSEA (lowest range of weights for estimated portion sizes). However, participants preferred household measures (e.g. 200 ml disposable cup) - deemed easy to use (median rating of 5), likely to use again in future (all scored either 4 or 5 on a scale from 1='not very likely' to 5='very likely to use again') and precise (narrow range of weights for estimated portion sizes). The majority indicated they would most likely use the PSEA preparing a meal (94 %), particularly dinner (86 %) in the home (89 %; all P<0·001) for amorphous grain foods.

CONCLUSIONS: Household measures may be precise, easy to use and acceptable aids for estimating the appropriate portion size of amorphous grain foods.

Analgesic exposure in pregnant rats affects fetal germ cell development with inter-generational reproductive consequences

Analgesics which affect prostaglandin (PG) pathways are used by most pregnant women. As germ cells (GC) undergo developmental and epigenetic changes in fetal life and are PG targets, we investigated if exposure of pregnant rats to analgesics (indomethacin or acetaminophen) affected GC development and reproductive function in resulting offspring (F1) or in the F2 generation. Exposure to either analgesic reduced F1 fetal GC number in both sexes and altered the tempo of fetal GC development sex-dependently, with delayed meiotic entry in oogonia but accelerated GC differentiation in males. These effects persisted in adult F1 females as reduced ovarian and litter size, whereas F1 males recovered normal GC numbers and fertility by adulthood. F2 offspring deriving from an analgesic-exposed F1 parent also exhibited sex-specific changes. F2 males exhibited normal reproductive development whereas F2 females had smaller ovaries and reduced follicle numbers during puberty/adulthood; as similar changes were found for F2 offspring of analgesic-exposed F1 fathers or mothers, we interpret this as potentially indicating an analgesic-induced change to GC in F1. Assuming our results are translatable to humans, they raise concerns that analgesic use in pregnancy could potentially affect fertility of resulting daughters and grand-daughters.

Are food-related perceptions associated with meal portion size decisions? A cross-sectional study

The purpose of this study was to test a comprehensive model of meal portion size determinants consisting of sociodemographic, psychological and food-related variables, whilst controlling for hunger and thirst.
Using cross-sectional nationally representative data collected in 2075 participants from the Island of Ireland (IoI) and Denmark (DK), eight separate hierarchical multiple regression analyses were conducted to examine the association between food-related variables and meal portion size (i.e. pizza, vegetable soup, chicken salad and a pork meal) within each country. Stepwise regressions were run with physiological control measures (hunger and thirst) entered in the first step, sociodemographic variables (sex, age, body mass index (BMI)) in the second step; psychological variables (cognitive restraint, uncontrolled eating, emotional eating, general health interest (GHI)) in the third step and food-related variables (expected fillingness, liking, expected healthfulness, food familiarity) in the fourth step.
Sociodemographic variables accounted for 2-19% of the variance in meal portion sizes; psychological variables explained an additional 3-8%; and food-related variables explained an additional 2-12%. When all four variable groups were included in the regression models, liking and sometimes expected healthfulness was positively associated with meal portion size. The strongest association was for liking, which was statistically significant in both countries for all meal types. Whilst expected healthfulness was not associated with pizza portion size in either country, it was positively associated with meals that have a healthier image (vegetable soup; chicken salad and in IoI, the pork meal).
In conclusion, after considering sociodemographic and psychological variables, and the food-related variables of liking and expected healthfulness, there may be little merit in manipulating the satiating power, at least of these type of meals, to maintain or promote weight loss.
Keywords: Meal portion size; psychological variables; expected fillingness; expected healthfulness; food liking; food familiarity.

Development of the Consumer Refrigerator Safety Questionnaire (CRSQ): A Measure of Consumer Perceptions and Practices

Food preparation and storage behaviors in the home deviating from the ‘best practice’ food safety recommendations may result in food borne illnesses. Currently, there are limited tools available to fully evaluate the consumer knowledge, perceptions and behavior in the area of refrigerator safety. The current study aimed to develop a valid and reliable tool in the form of a questionnaire (CFSQCRSQ) for assessing systematically all these aspects. Items relating to refrigerator safety knowledge (n=17), perceptions (n=46), reported behavior (n=30) were developed and pilot tested by an expert reference group and various consumer groups to assess face and content validity (n=20), item difficulty and item consistency (n=55) and construct validity (n=23). The findings showed that the CFSQCRSQ has acceptable face and content validity with acceptable levels of item difficulty. Item consistency was observed for 12 out of 15 refrigerator safety knowledge. Further, all five of the subscales of consumer perceptions of refrigerator safety practices relating to risk of developing foodborne disease food poisoning showed acceptable internal consistency (Cronbach’s α value > 0.8). Construct validity of the CFSQCRSQ was shown to be very good (p=0.022). The CFSQCRSQ exhibited acceptable test-retest reliability at 14 days with majority of knowledge items (93.3%) and reported behavior items (96.4%) having correlation coefficients of greater than 0.70. Overall, the CFSQCRSQ was deemed valid and reliable in assessing refrigerator safety knowledge and behavior and therefore has the potential for future use in identifying groups of individuals at increased risk of deviating from recommended refrigerator safety practices as well as the assessment of refrigerator safety knowledge, behavior for use before and after an intervention.

Seasonal and storm induced morphological variations at praia de Faro, península do Ancão, southern Portugal

Dissertação de Mestrado, Estudos Marinhos e Costeiros, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2009

Zooarqueologia e tafonomia de Castanheiro do Vento

Dissertação mest., Arqueologia, Universidade do Algarve, 2007

Captura-recaptura como método epidemiológico a aplicarà esclerose múltipla

Tese de Doutoramento, Neurologia, Faculdade de Medicina, Universidade de Lisboa, 2014

Concert Program for Mallet Head Series, Mallet Jazz October 19, 2012

Concert Program

Reading Maud’s remains: Tennyson, geological processes, and palaeontological reconstructions

As Tennyson's “little Hamlet ,” Maud (1855) posits a speaker who, like Hamlet, confronts the ignominious fate of dead remains. Maud's speaker contemplates such remains as bone, hair, shell, and he experiences his world as one composed of hard inorganic matter, such things as rocks, gems, flint, stone, coal, and gold. While Maud's imagery of “stones, and hard substances” has been read as signifying the speaker's desire “unnaturally to harden himself into insensibility” (Killham 231, 235), I argue that these substances benefit from being read in the context of Tennyson's wider understanding of geological processes. Along with highlighting these materials, the text's imagery focuses on processes of fossilisation, while Maud's characters appear to be in the grip of an insidious petrification. Despite the preoccupation with geological materials and processes, the poem has received little critical attention in these terms. Dennis R. Dean, for example, whose Tennyson and Geology (1985) is still the most rigorous study of the sources of Tennyson's knowledge of geology, does not detect a geological register in the poem, arguing that by the time Tennyson began to write Maud, he was “relatively at ease with the geological world” (Dean 21). I argue, however, that Maud reveals that Tennyson was anything but “at ease” with geology. While In Memoriam (1851) wrestles with religious doubt that is both initiated, and, to some extent, alleviated by geological theories, it finally affirms the transcendence of spirit over matter. Maud, conversely, gravitates towards the ground, concerning itself with the corporal remains of life and with the agents of change that operate on all matter. Influenced by his reading of geology, and particularly Charles Lyell's provocative writings on the embedding and fossilisation of organic material in strata in his Principles of Geology (1830–33) volume 2, Tennyson's poem probes the taphonomic processes that result in the incorporation of dead remains and even living flesh into the geological system.

Friction losses of Newtonian and non-Newtonian fluids flowing in laminar regime in a helical coil

This study aimed to carry out experimental work to determine, for Newtonian and non-Newtonian fluids, the friction factor (fc) with simultaneous heat transfer, at constant wall temperature as boundary condition, in fully developed laminar flow inside a vertical helical coil. The Newtonian fluids studied were aqueous solutions of glycerol, 25%, 36%, 43%, 59% and 78% (w/w). The non-Newtonian fluids were aqueous solutions of carboxymethylcellulose (CMC), a polymer, with concentrations of 0.2%, 0.3%, 0.4% and 0.6% (w/w) and aqueous solutions of xanthan gum (XG), another polymer, with concentrations of 0.1% and 0.2% (w/w). According to the rheological study done, the polymer solutions had shear-thinning behavior and different values of viscoelasticity. The helical coil used has an internal diameter, curvature ratio, length and pitch, respectively: 0.00483 m, 0.0263, 5.0 m and 11.34 mm. It was concluded that the friction factors, with simultaneous heat transfer, for Newtonian fluids can be calculated using expressions from literature for isothermal flows. The friction factors for CMC and XG solutions are similar to those for Newtonian fluids when the Dean number, based in a generalized Reynolds number, is less than 80. For Dean numbers higher than 80, the friction factors of the CMC solutions are lower those of the XG solutions and of the Newtonian fluids. In this range the friction factors decrease with the increase of the viscometric component of the solution and increase for increasing elastic component. The change of behavior at Dean number 80, for Newtonian and non-Newtonian fluids, is in accordance with the study of Ali [4]. There is a change of behavior at Dean number 80, for Newtonian and non-Newtonian fluids, which is in according to previous studies. The data also showed that the use of the bulk temperature or of the film temperature to calculate the physical properties of the fluid has a residual effect in the friction factor values.

Heat transfer coefficients from Newtonian and non-Newtonian fluids flowing in laminar regime in a helical coil

This study aimed to carry out experimental work to obtain, for Newtonian and non-Newtonian fluids, heat transfer coefficients, at constant wall temperature as boundary condition, in fully developed laminar flow inside a helical coil. The Newtonian fluids studied were aqueous solutions of glycerol, 25%, 36%, 43%, 59% and 78% (w/w) and the non-Newtonian fluids aqueous solutions of carboxymethylcellulose (CMC), a polymer, with concentrations 0.1%, 0.2%, 0.3%, 0.4% and 0.6% (w/w) and aqueous solutions of xanthan gum (XG), another polymer, with concentrations 0.1% and 0.2% (w/w). According to the rheological study performed, the polymer solutions had shear thinning behavior and different values of elasticity. The helical coil used has internal diameter, curvature ratio, length and pitch, respectively: 0.004575 m, 0.0263, 5.0 m and 11.34 mm. The Nusselt numbers for the CMC solutions are, on average, slightly higher than those for Newtonian fluids, for identical Prandtl and generalized Dean numbers. As outcome, the viscous component of the shear thinning polymer tends to potentiate the mixing effect of the Dean cells. The Nusselt numbers of the XG solutions are significant lower than those of the Newtonian solutions, for identical Prandtl and generalized Dean numbers. Therefore, the elastic component of the polymer tends to diminish the mixing effect of the Dean cells. A global correlation, for Nusselt number as a function of Péclet, generalized Dean and Weissenberg numbers for all Newtonian and non-Newtonian solutions studied, is presented.

Liderança transformacional/transacional: que impacto no cinismo organizacional?

Dissertação apresentada à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Gestão Estratégica das Relações Públicas.

Apport de Mustio à la représentation de la femme antique

This essay analyses the complex interactions of medical, social and cultural discourse in Mustio's Gynaecia. In the light of recent work on the history of classical medicine informed by gender studies, notably by H. King, L. Dean-Jones and R. Flemming, it highlights the original contribution of Mustio's Sorani Gynaeciorum uetus translatio Latina to a history of medicine that takes its social and cultural dimensions into consideration. Mustio's way of representing women in this treatise, notably his understanding of the female body through various physical states and specific illnesses, indeed reveals significant changes and developments that took place in the medical art as well as in ancient society at large.