Structure and dynamics of supramolecular assemblies studied by advanced solid-state NMR spectroscopy

Ziel der vorliegenden Arbeit ist die Aufklärung von Struktur und Dynamik komplexer supramolekularer Systeme mittels Festkörper NMR Spektroskopie. Die Untersuchung von pi-pi Wechselwirkungen, welche einen entscheidenden Einfluss auf die strukturellen und dynamischen Eigenschaften supra- molekularer Systeme haben, hilft dabei, die Selbst- organisationsprozesse dieser komplexen Materialien besser zu verstehen. Mit dipolaren 1H-1H and 1H-13C Wiedereinkopplungs NMR Methoden unter schnellem MAS können sowohl 1H chemische Verschiebungen als auch dipolare 1H-1H und 1H-13C Kopplungen untersucht werden, ohne dass eine Isotopenmarkierung erforderlich ist. So erhält man detaillierte Informationen über die Struktur und die Beweglichkeit einzelner Molekül- segmente. In Verbindung mit sogenannten nucleus independent chemical shift (NICS) maps (berechnet mit ab-initio Methoden) lassen sich Abstände von Protonen relativ zu pi-Elektronensystemen bestimmen und so Strukturvorschläge ableiten. Mit Hilfe von homo- und heteronuklearen dipolaren Rotationsseitenbandenmustern könnenaußerdem Ordnungs- parameter für verschiedene Molekülsegmente bestimmt werden. Die auf diese Weise gewonnenen Informationen über die strukturellen und dynamischen Eigenschaften supramolekularer Systeme tragen dazu bei, strukturbestimmende Molekül- einheiten und Hauptordnungsphänomene zu identifizieren sowie lokale Wechselwirkungen zu quantifizieren, um so den Vorgang der Selbstorganisation besser zu verstehen.

Design, Synthese und biologische Evaluierung von Pyrrolcarboxamiden mit Nucleobasen- oder tricyclischer Aromatenfunktion

Ausgehend von den Naturstoffen Netropsin und Distamycin A, antitumoraktiven Pyrrolcarboxamiden, die selektiv an AT-reiche Sequenzen in der kleinen Rinne (Minor-Groove) der DNA binden, sollten neue Nucleobasen- bzw. Interkalator-gekoppelte Derivate (letztere werden als „Combilexine“ bezeichnet) synthetisiert und biologisch evaluiert werden. Unter Zuhilfenahme quantenchemischer AM1-Rechnungen sollten Struktur-Wirkungs-Beziehungen abgeleitet werden. Als Grundgerüst diente die Mono- bzw. Bispyrrolcarboxamid-Einheit mit C-terminaler N,N-Dimethyl-1,3-diaminopropan-Seitenkette, die die ebenfalls basische Amidinstruktur der Leitsubstanzen imitieren sollte. Variationen erfolgten ausschließlich am N-terminalen Ende. Hierbei wurden zunächst Adenin-, Thymin- und Uracil-alkancarbonsäuren mit variabler Kettenlänge synthetisiert und über verschiedene Amidkupplungsverfahren an die Aminofunktion des Pyrrolcarboxamid-Grundgerüstes geknüpft. In Analogie hierzu folgte die Synthese von Combilexinen mit Acridon, (Nitro-)Naphthalimid und Iminostilben als Interkalatorkomponenten. Im 3. synthetischen Teil der Arbeit wurden Carbonsäure- und Sulfonylchloride des Interkalators Acridin und des Interkalators und Photosensibilisators Anthrachinon über die aliphatischen Linker ß-Alanin und -Aminobuttersäure an das Pyrrolcarboxamidgrundgerüst gebunden. Testungen von Verbindungen aller 3 Serien auf Zytotoxizität beim National Cancer Institute, USA, und DNA-Bindestudien und Topoisomerase-Hemmtests im Laboratory of Pharmacology, INSERM in Lille, Frankreich, schlossen sich an. Bei allen Verbindungen mit mindestens 3 Carboxamid-Funktionen zeigte sich gute bis ausgezeichnete DNA-Bindung; einige wiesen Topoisomerase II - Hemmung auf. Beide Parameter korrelierten allerdings nicht mit der Zytotoxizität, was vor allem an der mangelhaften Zellmembranpermeation einiger Verbindungen aufgrund zu geringer Lipophilie liegen dürfte. Quantenchemische Rechnungen ergaben ebenfalls wenige Gesetzmäßigkeiten. Ein elektronenarmer N-terminaler Rest (wie im Falle des hochpotenten Iminostilben-Derivates) scheint aber die Zytotoxizität einer Substanz ebenso wie zunehmende Linkerlänge zu begünstigen. Eine Ausnahme bilden hier die Anthrachinonderivate. Die drei zytotoxisch aktivsten Vertreter dieser Gruppe besitzen als Linker ß-Alanin, was eine aus der sonst bei Minor-Groove-Bindern üblichen Kurvature herausragende Konformation zur Folge hat. Diese ermöglicht vermutlich eine besonders gute Interaktion mit der DNA.

Performance evaluation of low environmental impact asphalt concretes using the mechanistic empirical design method based on laboratory fatigue and permanent deformation models

The "sustainability" concept relates to the prolonging of human economic systems with as little detrimental impact on ecological systems as possible. Construction that exhibits good environmental stewardship and practices that conserve resources in a manner that allow growth and development to be sustained for the long-term without degrading the environment are indispensable in a developed society. Past, current and future advancements in asphalt as an environmentally sustainable paving material are especially important because the quantities of asphalt used annually in Europe as well as in the U.S. are large. The asphalt industry is still developing technological improvements that will reduce the environmental impact without affecting the final mechanical performance. Warm mix asphalt (WMA) is a type of asphalt mix requiring lower production temperatures compared to hot mix asphalt (HMA), while aiming to maintain the desired post construction properties of traditional HMA. Lowering the production temperature reduce the fuel usage and the production of emissions therefore and that improve conditions for workers and supports the sustainable development. Even the crumb-rubber modifier (CRM), with shredded automobile tires and used in the United States since the mid 1980s, has proven to be an environmentally friendly alternative to conventional asphalt pavement. Furthermore, the use of waste tires is not only relevant in an environmental aspect but also for the engineering properties of asphalt [Pennisi E., 1992]. This research project is aimed to demonstrate the dual value of these Asphalt Mixes in regards to the environmental and mechanical performance and to suggest a low environmental impact design procedure. In fact, the use of eco-friendly materials is the first phase towards an eco-compatible design but it cannot be the only step. The eco-compatible approach should be extended also to the design method and material characterization because only with these phases is it possible to exploit the maximum potential properties of the used materials. Appropriate asphalt concrete characterization is essential and vital for realistic performance prediction of asphalt concrete pavements. Volumetric (Mix design) and mechanical (Permanent deformation and Fatigue performance) properties are important factors to consider. Moreover, an advanced and efficient design method is necessary in order to correctly use the material. A design method such as a Mechanistic-Empirical approach, consisting of a structural model capable of predicting the state of stresses and strains within the pavement structure under the different traffic and environmental conditions, was the application of choice. In particular this study focus on the CalME and its Incremental-Recursive (I-R) procedure, based on damage models for fatigue and permanent shear strain related to the surface cracking and to the rutting respectively. It works in increments of time and, using the output from one increment, recursively, as input to the next increment, predicts the pavement conditions in terms of layer moduli, fatigue cracking, rutting and roughness. This software procedure was adopted in order to verify the mechanical properties of the study mixes and the reciprocal relationship between surface layer and pavement structure in terms of fatigue and permanent deformation with defined traffic and environmental conditions. The asphalt mixes studied were used in a pavement structure as surface layer of 60 mm thickness. The performance of the pavement was compared to the performance of the same pavement structure where different kinds of asphalt concrete were used as surface layer. In comparison to a conventional asphalt concrete, three eco-friendly materials, two warm mix asphalt and a rubberized asphalt concrete, were analyzed. The First Two Chapters summarize the necessary steps aimed to satisfy the sustainable pavement design procedure. In Chapter I the problem of asphalt pavement eco-compatible design was introduced. The low environmental impact materials such as the Warm Mix Asphalt and the Rubberized Asphalt Concrete were described in detail. In addition the value of a rational asphalt pavement design method was discussed. Chapter II underlines the importance of a deep laboratory characterization based on appropriate materials selection and performance evaluation. In Chapter III, CalME is introduced trough a specific explanation of the different equipped design approaches and specifically explaining the I-R procedure. In Chapter IV, the experimental program is presented with a explanation of test laboratory devices adopted. The Fatigue and Rutting performances of the study mixes are shown respectively in Chapter V and VI. Through these laboratory test data the CalME I-R models parameters for Master Curve, fatigue damage and permanent shear strain were evaluated. Lastly, in Chapter VII, the results of the asphalt pavement structures simulations with different surface layers were reported. For each pavement structure, the total surface cracking, the total rutting, the fatigue damage and the rutting depth in each bound layer were analyzed.

Design, synthesis and photochemical studies of stilbenoid dendrimers

Stilbenoid dendrimers with stilbene in the periphery and stilbene in periphery as well as core were synthesized by convergent approach except 2nd generation dendrimer with stilbene in the periphery as well as in core (D-5). All dendrimers were characterized by standard techniques such as 1H NMR, 13C NMR, MS and IR spectroscopy. The MALDI-TOF technique proved to be very helpful in the identification of the 2nd generation dendrimer (D-5) with a mass of 3231 a.m.u. The dendrimers were designed in such a way that an intramolecular photochemical CC bond formation was favored. As two stilbene units of the same molecule were close enough so they preferred an intramolecular cyclic process except for zero generation dendrimers. Apart from the cycloaddition, some E/Z isomerization and oligomer formation was also observed on irradiation. These processes were observed by 1H NMR and MALDI-TOF MS. The photochemical behavior was also studied by UV absorption spectroscopy. Irradiating by monochromatic light led to an initial E/Z isomerization and by prolonged irradiation, an irreversible cyclic structure was formed. The choice of the wavelength of incident light is very important as irradiation at 320 nm leads to a reversible E/Z isomerization and a non-reversible cyclobutane formation, but irradiation at 340 nm favors the one-way process E Z. The [2+2] cycloaddition of molecule Tm2De was also studied by irradiating thin films on a quartz surface. An AFM image was taken before irradiation, after 3 sec irradiation and after long irradiation (1 hour). AFM studies show that a short irradiation leads to a cyclic structure as formation of hills of about 20-30 nm on the surface. A prolonged irradiation leads to a CC cross linking which can be monitored on AFM images as disappearance of hills. The roughness goes back to an almost smooth surface. These results prove a very complex material transport, which accompanies the reaction in the surface region.

Advanced signal and receiver design for next generation OFDM systems

This thesis deal with the design of advanced OFDM systems. Both waveform and receiver design have been treated. The main scope of the Thesis is to study, create, and propose, ideas and novel design solutions able to cope with the weaknesses and crucial aspects of modern OFDM systems. Starting from the the transmitter side, the problem represented by low resilience to non-linear distortion has been assessed. A novel technique that considerably reduces the Peak-to-Average Power Ratio (PAPR) yielding a quasi constant signal envelope in the time domain (PAPR close to 1 dB) has been proposed.The proposed technique, named Rotation Invariant Subcarrier Mapping (RISM),is a novel scheme for subcarriers data mapping,where the symbols belonging to the modulation alphabet are not anchored, but maintain some degrees of freedom. In other words, a bit tuple is not mapped on a single point, rather it is mapped onto a geometrical locus, which is totally or partially rotation invariant. The final positions of the transmitted complex symbols are chosen by an iterative optimization process in order to minimize the PAPR of the resulting OFDM symbol. Numerical results confirm that RISM makes OFDM usable even in severe non-linear channels. Another well known problem which has been tackled is the vulnerability to synchronization errors. Indeed in OFDM system an accurate recovery of carrier frequency and symbol timing is crucial for the proper demodulation of the received packets. In general, timing and frequency synchronization is performed in two separate phases called PRE-FFT and POST-FFT synchronization. Regarding the PRE-FFT phase, a novel joint symbol timing and carrier frequency synchronization algorithm has been presented. The proposed algorithm is characterized by a very low hardware complexity, and, at the same time, it guarantees very good performance in in both AWGN and multipath channels. Regarding the POST-FFT phase, a novel approach for both pilot structure and receiver design has been presented. In particular, a novel pilot pattern has been introduced in order to minimize the occurrence of overlaps between two pattern shifted replicas. This allows to replace conventional pilots with nulls in the frequency domain, introducing the so called Silent Pilots. As a result, the optimal receiver turns out to be very robust against severe Rayleigh fading multipath and characterized by low complexity. Performance of this approach has been analytically and numerically evaluated. Comparing the proposed approach with state of the art alternatives, in both AWGN and multipath fading channels, considerable performance improvements have been obtained. The crucial problem of channel estimation has been thoroughly investigated, with particular emphasis on the decimation of the Channel Impulse Response (CIR) through the selection of the Most Significant Samples (MSSs). In this contest our contribution is twofold, from the theoretical side, we derived lower bounds on the estimation mean-square error (MSE) performance for any MSS selection strategy,from the receiver design we proposed novel MSS selection strategies which have been shown to approach these MSE lower bounds, and outperformed the state-of-the-art alternatives. Finally, the possibility of using of Single Carrier Frequency Division Multiple Access (SC-FDMA) in the Broadband Satellite Return Channel has been assessed. Notably, SC-FDMA is able to improve the physical layer spectral efficiency with respect to single carrier systems, which have been used so far in the Return Channel Satellite (RCS) standards. However, it requires a strict synchronization and it is also sensitive to phase noise of local radio frequency oscillators. For this reason, an effective pilot tone arrangement within the SC-FDMA frame, and a novel Joint Multi-User (JMU) estimation method for the SC-FDMA, has been proposed. As shown by numerical results, the proposed scheme manages to satisfy strict synchronization requirements and to guarantee a proper demodulation of the received signal.

Structure and properties of composite polyolefin materials

This thesis is based on three main studies, all dealing with structure-property investigation of semicrystalline polyolefin-based composites. Low density poly(ethylene) (LDPE) and isotactic poly(propylene) (iPP) were chosen as parts of the composites materials and they were investigated either separately (as homoploymers), either in blend systems with the composition LDPE/iPP 80/20 or as filled matrix with layered silicate (montmorillonite). The beneficial influence of adding ethylene-co-propylene polymer of amorphous nature, to low density poly(ethylene)/isotactic poly(propylene) (80/20) blend is demonstrated. This effect is expressed by the major improvement of mechanical properties of ternary blends as examined at a macroscopic size scale by means of tensile measurements. The structure investigation also reveals a clear dependence of the morphology on adding ethylene-copropylene polymer. Both the nature and the content of ethylene-co-propylene polymer affect structure and properties. It is further demonstrated that the extent of improvement in mechanical properties is to be related to the molecular details of the compatibilizer. Combination of high molecular weight and high ethylene content is appropriate for the studied system where the poly(ethylene) plays the role of matrix. A new way to characterize semicrystalline systems by means of Brillouin spectroscopy is presented in this study. By this method based on inelastic light scattering, we were able to measure the high frequency elastic constant (c11) of the two microphases in the case where the spherulites size is exhibit size larger than the size of the probing phonon wavelength. In this considered case, the sample film is inhomogeneous over the relevant length scales and there is an access to the transverse phonon in the crystalline phase yielding the elastic constant c44 as well. Isotactic poly(propylene) is well suited for this type of investigation since its morphology can be tailored through different thermal treatment from the melt. Two distinctly different types of films were used; quenched (low crystallinity) and annealed (high crystallinity). The Brillouin scattering data are discussed with respect to the spherulites size, lamellae thickness, long period, crystallinity degree and well documented by AFM images. The structure and the properties of isotactic poly(propylene) matrix modified by inorganic layered silicate, montmorillonite, are discussed with respect to the clay content. Isotactic poly(propylene)-graft-maleic anhydride was used as compatibilizer. It is clearly demonstrated that the property enhancement is largely due to the ability of layered silicate to exfoliate. The intimate dispersion of the nanometer-thick silicate result from a delicate balance of the content ratio between the isotactic poly(propylene)-graft-maleic anhydride compatibilizer and the inorganic clay.

Rational design of selective anion receptors

The new family of the anion receptors based on oligoureas with varied flexibility was developed and studied. The preparation of the urea chains containing two different units in various sequences was elaborated. The complete sets of four cyclic trimers and six tetramers based on the two units were prepared. Their conformational and complexation properties were studied with NMR spectroscopy and X-ray structure determinations, their behaviour towards various anions was evaluated and compared. The synthesis and the same studies were performed also with four different cyclic hexamers. During these studies the remarkable templation by two halide anions was observed.

Genetic structure and connectivity between populations of two common Mediterranean sessile invertebrates

Population genetic and phylogeography of two common mediterranean species were studied in 10 localities located on the coasts of Toscana, Puglia and Calabria. The aim of the study was to verify the extent of genetic breaks, in areas recognized as boundaries between Mediterranean biogeographic sectors. From about 100 sequences obtained from the mitochondrial Cytochrome Oxidase subunit I (COI) gene of Halocynthia papillosa and Hexaplex trunculus genetic diversity, genetic structure at small and large distances and demographic history of both specieswere analyzed. No evidences of genetic breaks were found for the two species in Toscana and Puglia. The genetic structure of H. trunculus evidences the extent of a barrier to gene flow localized in Calabria, which could be represented by the Siculo-Tunisian Strait and the Strait of Messina. The observed patterns showed similar level of gene flow at small distances in both species, although the two species have different larval ecology. These results suggest that other factors, such as currents, local dynamics and seasonal temperatures, influence the connectivity along the Italian peninsula. The geographic distribution of the haplotypes shows that H. papillosacould represent a single genetic pool in expansion, whereas H. trunculus has two distinct genetic pools in expansion. The demographic pattern of the two species suggests that Pleistocene sea level oscillations, in particular of the LGM, may have played a key role in shaping genetic structure of the two species. This knowledge provides basic information, useful for the definition of management plans, or for the design of a network of marine protected areas along the Italian peninsula.

Photovoltaics from discotic liquid crystalline HBCs & poly(2,7-carbazole)s

In this study, the use of the discotic liquid crystalline HBCs and conjugated polymers based on 2,7-carbazole were investigated in detail as donor materials in organic bulk-heterojunction solar cells. It has been shown that they perform efficiently in photovoltaic devices in combination with suitable acceptors. The efficiency was found to depend strongly dependent on the morphology of the film. By investigation of a series of donor materials with similar molecular structures based on both discotic molecules and conjugated polymers, a structure-performance relation was established, which is not only instructive for these materials but also serves as a guideline for improved molecular design. For the series of HBCs used in this study, it is found that the device efficiency decreases with increasing length of the alkyl substituents in the HBC. Thus, the derivative with the smallest alkyl mantle, being more crystalline compared to the HBCs with longer alkyl chains, gave the highest EQE of 12%. A large interfacial separation was found in the blend of HBC-C6,2 and PDI, since the crystallization of the acceptor occurred in a solid matrix of HBC. This led to small dispersed organized domains and benefited the charge transport. In contrast, blends of HBC-C10,6/PDI or HBC-C14,10/PDI revealed a rather homogeneous film limiting the percolation pathways due to a mixed phase. For the first time, poly(2,7-carbazole) was incorporated as a donor material in solar cells using PDI as an electron acceptor. The good fit in orbital energy levels and absorption spectra led to high efficiency. This result indicates that conjugated polymers with high band-gap can also be applied as materials to build efficient solar cells if appropriate electron acceptors are chosen. In order to enhance the light absorption ability, new ladder-type polymers based on pentaphenylene and hexaphenylene with one and three nitrogen bridges per repeat unit have been synthesized and characterized. The polymer 2 with three nitrogen bridges showed more red-shifted absorbance and emission and better packing in the solid-state than the analogous polymer 3 with only one nitrogen bridge per monomer unit. An overall efficiency as high as 1.3% under solar light was obtained for the device based on 1 and PDI, compared with 0.7% for the PCz based device. Therefore, the device performance correlates to a large extent with the solar light absorption ability and the lateral distance between conjugated polymer chains. Since the lateral distance is determined by the length and number of attached alkyl side chains, it is possible to assume that these substituents insulate the charge carrier pathways and decrease the device performance. As an additional consequence, the active semiconductor is diluted in the insulating matrix leading to a lower light absorption. This work suggests ways to improve device performance by molecular design, viz. maintaining the HOMO level while bathochromically shifting the absorption by adopting a more rigid ladder-type structure. Also, a high ratio of nitrogen bridges with small alkyl substituents was a desirable feature both in terms of adjusting the absorption and maintaining a low lateral inter-chain separation, which was necessary for obtaining high current and efficiency values.

Design, Synthese und biochemische/biologische Evaluierung bioisosterer Oligopyrrolcarboxamide mit aliphatisch-amidisch verknüpften DNA-Interkalatoren

Die DNA stellt aufgrund der genetischen Krankheitsursache nach wie vor ein überaus attraktives Target für das Design antitumoraktiver Zytostatika dar. Ein wesentlicher Schwerpunkt der heutigen Forschung besteht vor allem in der Entwicklung niedermolekularer, sequenzspezifischer DNA-Liganden zur gezielten Ausschaltung defekter Gene. Im Rahmen dieser Arbeit erfolgte daher in Anlehnung an die antitumoral wirksame Leitsubstanz Netropsin - ein AT-selektiver Minor Groove Binder mit Bispyrrolcarboxamid-Grundstruktur - erstmals der systematische Aufbau einer neuen Serie bioisosterer Hybridmoleküle, bestehend aus einem interkalierenden Strukturelement (Acridon, Naphthalimid, 5-Nitronaphthalimid, Anthrachinon, 11H-Pyrido[2,3-a]carbazol) und Thiophenpyrrol-, Imidazolpyrrol-, Thiazolpyrrol- bzw. Bisimidazolcarboxamid als rinnenbindende Oligoamid-Einheit (sog. Combilexine). Die chromophoren Systeme am N-Terminus wurden hierbei über aliphatische Linker variabler Kettenlänge mit der Carboxamid-Kette verknüpft. Als C-terminale Funktion kam sowohl die N,N-Dimethyl-1,3-diaminopropan- als auch die um ein C-Atom kürzere Dimethylaminoethylamin-Seitenkette zum Einsatz. Unter Verwendung modernster Reagenzien aus der Peptidkupplungschemie ist es gelungen, ein präparativ gut zugängliches, reproduzierbares Verfahren zur Synthese dieser bioisosteren Combilexine zu entwickeln. Anhand biophysikalischer/biochemischer, zellbiologischer und physikochemischer (1H-NMR-spektroskopischer und röntgenstrukturanalytischer) Methoden sowie Molecular Modelling Studien wurden erstmals bezüglich der DNA-Bindung, der Topoisomerase-Hemmung und der Antitumor-Zellzytotoxizität in einem breiten Rahmen vororientierende Struktur-Wirkungsbeziehungen an bioisosteren Liganden erstellt. Wenngleich zwischen den in vitro und in silico ermittelten Befunden keine konkreten Gesetzmäßigkeiten zu erkennen waren, so ließ die Summation der Ergebnisse dennoch darauf schließen, dass es sich bei den Naphthalimidpropion- und Acridonbuttersäure-Derivaten mit C-terminaler Propylendiamin-Funktion um die aussichtsreichsten Kandidaten in Bezug auf die DNA-Affinität bzw. Zytotoxizität handelte.

Design, synthesis and biological evaluation of substituted naphthalene diimides as anticancer agents

It has been proved that naphthalene diimide (NDI) derivatives display anticancer properties as intercalators and G-quadruplex-binding ligands, leading to DNA damage, senescence and down-regulation of oncogene expression. This thesis deals with the design and synthesis of disubstituted and tetrasubstituted NDI derivatives endowed with anticancer activity, interacting with DNA together with other targets implicated in cancer development. Disubstituted NDI compounds have been designed with the aim to provide potential multitarget directed ligands (MTDLs), in order to create molecules able to simultaneously interact with some of the different targets involved in this pathology. The most active compound, displayed antiproliferative activity in submicromolar range, especially against colon and prostate cancer cell lines, the ability to bind duplex and quadruplex DNA, to inhibit Taq polymerase and telomerase, to trigger caspase activation by a possible oxidative mechanism, to downregulate ERK 2 protein and to inhibit ERKs phosphorylation, without acting directly on microtubules and tubuline. Tetrasubstituted NDI compounds have been designed as G-quadruplex-binding ligands endowed with anticancer activity. In order to improve the cellular uptake of the lead compound, the N-methylpiperazine moiety have been replaced with different aromatic systems and methoxypropyl groups. The most interesting compound was 1d, which was able to interact with the G-quadruplexes both telomeric and in HSP90 promoter region, and it has been co-crystallized with the human telomeric G-quadruplex, to directly verify its ability to bind this kind of structure, and also to investigate its binding mode. All the morpholino substituted compounds show antiproliferative activity in submicromolar values mainly in pancreatic and lung cancer cell lines, and they show an improved biological profile in comparison with that of the lead compound. In conclusion, both these studies, may represent a promising starting point for the development of new interesting molecules useful for the treatment of cancer, underlining the versatility of the NDI scaffold.

Ahmedabad | Laboratorio di architettura moderna Il National Institute of Design (1961-68) fra contatti internazionali ed echi della tradizione

Oggetto della ricerca è lo studio del National Institute of Design (NID), progettato da Gautam Sarabhai e sua sorella Gira, ad Ahmedabad, assunta a paradigma del nuovo corso della politica che il Primo Ministro Nehru espresse nei primi decenni del governo postcoloniale. Obiettivo della tesi è di analizzare il fenomeno che unisce modernità e tradizione in architettura. La modernità indiana, infatti, nacque e si sviluppò con i caratteri di un Giano bifronte: da un lato, la politica del Primo Ministro Nehru favorì lo sviluppo dell’industria e della scienza; dall’altro, la visione di Gandhi mirava alla riscoperta del locale, delle tradizioni e dell’artigianato. Questi orientamenti influenzarono l’architettura postcoloniale. Negli anni ‘50 e ’60 Ahmedabad divenne la culla dell’architettura moderna indiana. Kanvinde, i Sarabhai, Correa, Doshi, Raje trovarono qui le condizioni per costruire la propria identità come progettisti e come intellettuali. I motori che resero possibile questo fermento furono principalmente due: una committenza di imprenditori illuminati, desiderosi di modernizzare la città; la presenza ad Ahmedabad, a partire dal 1951, dei maestri dell’architettura moderna, tra cui i più noti furono Le Corbusier e Kahn, invitati da quella stessa committenza, per la quale realizzarono edifici di notevole rilevanza. Ad Ahmedabad si confrontarono con forza entrambe le visioni dell’India moderna. Lo sforzo maggiore degli architetti indiani si espresse nel tentativo di conciliare i due aspetti, quelli che derivavano dalle influenze internazionali e quelli che provenivano dallo spirito della tradizione. Il progetto del NID è uno dei migliori esempi di questo esercizio di sintesi. Esso recupera nella composizione spaziale la lezione di Wright, Le Corbusier, Kahn, Eames ibridandola con elementi della tradizione indiana. Nell’uso sapiente della struttura modulare e a padiglione, della griglia ordinatrice a base quadrata, dell’integrazione costante fra spazi aperti, natura e architettura affiorano nell’edificio del NID echi di una cultura millenaria.

Employing Distances in Design-based Spatial Estimation

In the last couple of decades we assisted to a reappraisal of spatial design-based techniques. Usually the spatial information regarding the spatial location of the individuals of a population has been used to develop efficient sampling designs. This thesis aims at offering a new technique for both inference on individual values and global population values able to employ the spatial information available before sampling at estimation level by rewriting a deterministic interpolator under a design-based framework. The achieved point estimator of the individual values is treated both in the case of finite spatial populations and continuous spatial domains, while the theory on the estimator of the population global value covers the finite population case only. A fairly broad simulation study compares the results of the point estimator with the simple random sampling without replacement estimator in predictive form and the kriging, which is the benchmark technique for inference on spatial data. The Monte Carlo experiment is carried out on populations generated according to different superpopulation methods in order to manage different aspects of the spatial structure. The simulation outcomes point out that the proposed point estimator has almost the same behaviour as the kriging predictor regardless of the parameters adopted for generating the populations, especially for low sampling fractions. Moreover, the use of the spatial information improves substantially design-based spatial inference on individual values.

De Novo Design of Foldamers for Preparation of Nanostructured Materials

This thesis deals with the synthesis and the conformation analysis of hybrid foldamers containing the 4-carboxyoxazolidin-2-one unit or related molecules, in which an imido-type function is obtained by coupling the nitrogen of the heterocycle with the carboxylic acid moiety of the next unit. The imide group is characterized by a nitrogen atom connected to an endocyclic and an exocyclic carbonyl, which tend always to adopt the trans conformation. As a consequence of this locally constrained disposition effect, these imide-type oligomers are forced to fold in ordered conformations. The synthetic approach is highly tuneable with endless variations, so, simply by changing the design and the synthesis, a wide variety of foldamers with the required properties may be prepared “on demand”. Thus a wide variety of unusual secondary structures and interesting supramolecular materials may be obtained with hybrid foldamers. The behaviour in the solid state of some of these compounds has been analyzed in detail, thus showing the formation of different kinds of supramolecular materials that may be used for several applications. A winning example is the production of a bolaamphiphilic gelators that may also be doped with small amounts of dansyl containing compounds, needed to show the cellular uptake into IGROV-1 cells, by confocal laser scanning microscopy. These gels are readily internalized by cells and are biologically inactive, making them very good candidates in the promising field of drug delivery. In the last part of the thesis, a particular attention was directed to the search of new scaffolds that behave as constrained amino acid mimetics, showing that tetramic acids derivatives could be good candidates for the synthesis and applications of molecules having an ordered secondary structure.

A regional environmental accounting matrix and integrated environmental economic analyses to support regional planning

This research deals with the deepening and use of an environmental accounting matrix in Emilia-Romagna, RAMEA air emissions (regional NAMEA), carried out by the Regional Environment Agency (Arpa) in an European project. After a depiction of the international context regarding the widespread needing to integrate economic indicators and go beyond conventional reporting system, this study explains the structure, update and development of the tool. The overall aim is to outline the matrix for environmental assessments of regional plans, draw up sustainable reports and monitor effects of regional policies in a sustainable development perspective. The work focused on an application of a Shift-Share model, on the integration with eco-taxes, industrial waste production, energy consumptions, on applications of the extended RAMEA as a policy tool, following Eurostat guidelines. The common thread is the eco-efficiency (economic-environmental efficiency) index. The first part, in English, treats the methodology used to build a more complete tool; in the second part RAMEA has been applied on two regional case studies, in Italian, to support decision makers regarding Strategic Environmental Assessments’ processes (2001/42/EC). The aim is to support an evidence-based policy making by integrating sustainable development concerns at all levels. The first case study regards integrated environmental-economic analyses in support to the SEA of the Regional Waste management plan. For the industrial waste production an extended and updated RAMEA has been developed as a useful policy tool, to help in analysing and monitoring the state of environmental-economic performances. The second case study deals with the environmental report for the SEA of the Regional Program concerning productive activities. RAMEA has been applied aiming to an integrated environmental-economic analysis of the context, to investigate the performances of the regional production chains and to depict and monitor the area where the program should be carried out, from an integrated environmental-economic perspective.