The state of the field in UK management research: reflections of the Research Assessment Exercise (RAE) panel

This paper reviews the state of the field of the sub-disciplines within UK management research, based upon the submissions of 94 UK higher education institutions to the Business and Management Studies Panel in the UK's 2001 Research Assessment Exercise (RAE). It offers observations on the UK model of the assessment of quality in, and funding of, research conducted in publicly funded higher education institutions.

Determinants of inward investment in the UK, a panel analysis

This paper develops an inter-industry model of inward investment, using a fixed effects approach. This demonstrates that when inward investment is investigated in such a framework, previous findings, relating to the specification of measures of location advantage and ownership advantages no longer hold. This also shows that there are some industries that have attracted significant inward investment over time, and continue to do so, while others are noticeably less successful. Reasons for this, and potential policy measures are briefly discussed.

Integrating group Delphi, fuzzy logic and expert systems for marketing strategy development:the hybridisation and its effectiveness

A hybrid approach for integrating group Delphi, fuzzy logic and expert systems for developing marketing strategies is proposed in this paper. Within this approach, the group Delphi method is employed to help groups of managers undertake SWOT analysis. Fuzzy logic is applied to fuzzify the results of SWOT analysis. Expert systems are utilised to formulate marketing strategies based upon the fuzzified strategic inputs. In addition, guidelines are also provided to help users link the hybrid approach with managerial judgement and intuition. The effectiveness of the hybrid approach has been validated with MBA and MA marketing students. It is concluded that the hybrid approach is more effective in terms of decision confidence, group consensus, helping to understand strategic factors, helping strategic thinking, and coupling analysis with judgement, etc.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Feasibility of a solar panel-powered liquid desiccant cooling system for greenhouses

To investigate the technical feasibility of a novel cooling system for commercial greenhouses, knowledge of the state of the art in greenhouse cooling is required. An extensive literature review was carried out that highlighted the physical processes of greenhouse cooling and showed the limitations of the conventional technology. The proposed cooling system utilises liquid desiccant technology; hence knowledge of liquid desiccant cooling is also a prerequisite before designing such a system. Extensive literature reviews on solar liquid desiccant regenerators and desiccators, which are essential parts of liquid desiccant cooling systems, were carried out to identify their advantages and disadvantages. In response to the findings, a regenerator and a desiccator were designed and constructed in lab. An important factor of liquid desiccant cooling is the choice of liquid desiccant itself. The hygroscopicity of the liquid desiccant affects the performance of the system. Bitterns, which are magnesium-rich brines derived from seawater, are proposed as an alternative liquid desiccant for cooling greenhouses. A thorough experimental and theoretical study was carried out in order to determine the properties of concentrated bitterns. It was concluded that their properties resemble pure magnesium chloride solutions. Therefore, magnesium chloride solution was used in laboratory experiments to assess the performance of the regenerator and the desiccator. To predict the whole system performance, the physical processes of heat and mass transfer were modelled using gPROMS® advanced process modelling software. The model was validated against the experimental results. Consequently it was used to model a commercials-scale greenhouse in several hot coastal areas in the tropics and sub-tropics. These case studies show that the system, when compared to evaporative cooling, achieves 3oC-5.6oC temperature drop inside the greenhouse in hot and humid places (RH>70%) and 2oC-4oC temperature drop in hot and dry places (50%

Wage inequality and the role of multinationals:evidence from UK panel data

Despite the increased attention on the impacts of globalisation, there has been little empirical investigation into the impact of multinational firms on the domestic labour market and in particular wage inequality, this is in spite of a rapid increase in foreign direct investment (FDI) at around the same time of rising inequality. Using UK panel data, this paper tests whether inward flows of FDI have contributed to increasing wage inequality. Even after controlling for the two most common explanations of wage inequality, technology and trade, we find that FDI has a significant effect upon wage inequality, with the overall impact of FDI explaining on average 11% of wage inequality. © 2003 Elsevier B.V. All rights reserved.

The appraisal and management of multi-storey dwelling blocks using large concrete panel systems

This exploratory study is concerned with the integrated appraisal of multi-storey dwelling blocks which incorporate large concrete panel systems (LPS). The first step was to look at U.K. multi-storey dwelling stock in general, and under the management of Birmingham City Council in particular. The information has been taken from the databases of three departments in the City of Birmingham, and rearranged in a new database using a suite of PC software called `PROXIMA' for clarity and analysis. One hundred of their stock were built large concrete panel system. Thirteen LPS blocks were chosen for the purpose of this study as case-studies depending mainly on the height and age factors of the block. A new integrated appraisal technique has been created for the LPS dwelling blocks, which takes into account the most physical and social factors affecting the condition and acceptability of these blocks. This appraisal technique is built up in a hierarchical form moving from the general approach to particular elements (a tree model). It comprises two main approaches; physical and social. In the physical approach, the building is viewed as a series of manageable elements and sub-elements to cover every single physical or environmental factor of the block, in which the condition of the block is analysed. A quality score system has been developed which depends mainly on the qualitative and quantitative conditions of each category in the appraisal tree model, and leads to physical ranking order of the study blocks. In the social appraisal approach, the residents' satisfaction and attitude toward their multi-storey dwelling block was analysed in relation to: a. biographical and housing related characteristics; and b. social, physical and environmental factors associated with this sort of dwelling, block and estate in general.The random sample consisted of 268 residents living in the 13 case study blocks. Data collected was analysed using frequency counts, percentages, means, standard deviations, Kendall's tue, r-correlation coefficients, t-test, analysis of variance (ANOVA) and multiple regression analysis. The analysis showed a marginally positive satisfaction and attitude towards living in the block. The five most significant factors associated with the residents' satisfaction and attitude in descending order were: the estate, in general; the service categories in the block, including heating system and lift services; vandalism; the neighbours; and the security system of the block. An important attribute of this method, is that it is relatively inexpensive to implement, especially when compared to alternatives adopted by some local authorities and the BRE. It is designed to save time, money and effort, to aid decision making, and to provide ranked priority to the multi-storey dwelling stock, in addition to many other advantages. A series of solution options to the problems of the block was sought for selection and testing before implementation. The traditional solutions have usually resulted in either demolition or costly physical maintenance and social improvement of the blocks. However, a new solution has now emerged, which is particularly suited to structurally sound units. The solution of `re-cycling' might incorporate the reuse of an entire block or part of it, by removing panels, slabs and so forth from the upper floors in order to reconstruct them as low-rise accommodations.

Review of progress in implementing the recommendations of Sir Gareth Roberts regarding employability and career development of PhD students and research staff:A report for Research Councils UK by an independent review panel October 2010

The need for improvement in the development of research careers and researchers’ training in transferable skills was highlighted in two particular recommendations (numbers 4.2 and 5.3) in the 2002 report ‘SET for success: the report of Sir Gareth Roberts’ Review - the supply of people with science, technology, engineering and mathematics skills’ (Roberts, 2002). As a consequence of that review, Research Councils UK (RCUK)1 have invested about £120 million, usually referred to as ’Roberts’ Money’, in research organisations to address this concern in all research disciplines. The last ‘Roberts’ Money’ payment will be for the period up to March 2011; it was therefore proposed to assess the progress made with taking forward these specific recommendations. An independent panel was formed by RCUK to undertake this review in 2010. The terms of reference for the panel are in Annex A. In summary, the panel was asked to review progress made and to advise RCUK and the higher education (HE) sector about future requirements for the development and training of researchers. In the course of their review, the panel considered a wide range of existing reports, interviewed key stakeholders in the HE sector and elsewhere, as well as drawing on their own knowledge and expertise. This report presents the findings of the panel’s review.

A comparison of sales response predictions from demand models applied to store-level versus panel data

In order to generate sales promotion response predictions, marketing analysts estimate demand models using either disaggregated (consumer-level) or aggregated (store-level) scanner data. Comparison of predictions from these demand models is complicated by the fact that models may accommodate different forms of consumer heterogeneity depending on the level of data aggregation. This study shows via simulation that demand models with various heterogeneity specifications do not produce more accurate sales response predictions than a homogeneous demand model applied to store-level data, with one major exception: a random coefficients model designed to capture within-store heterogeneity using store-level data produced significantly more accurate sales response predictions (as well as better fit) compared to other model specifications. An empirical application to the paper towel product category adds additional insights. This article has supplementary material online.

Cost economies, efficiency and productivity growth in the Chinese banking industry:evidence from a quarterly panel dataset

This article examines cost economies, productivity growth and cost efficiency of the Chinese banks using a unique panel dataset that identifies banks' four outputs and four input prices over the period of 1995-2001. By assessing the appropriateness of model specification, and making use of alternative methodologies in evaluating the performance of banks, we find that the joint-stock commercial banks outperform state-owned commercial banks in productivity growth and cost efficiency. Under the variable cost assumption, Chinese banks display economies of scale, with state-owned commercial banks enjoying cost advantages over the joint-stock commercial banks. Consequently, our results highlight the ownership advantage of these two types of banks and generally support the ongoing banking reform and transformation that is currently taking place in China.

Privatisation, corporate control and employment growth:evidence from a panel of large Polish firms, 1996-2002

Using data on Polish firms this paper examines the relationship between corporate control structures, sales growth and the determinants of employment change. Privatised and de novo firms are the main drivers of employment growth; in the case of de novo firms, it is foreign ownership which underpins the result. Being privatised has a positive impact on employment but this is concentrated within a range of 3–6 years after privatisation. There are no systematic differences in employment response to negative sales growth across the ownership categories. Employment in state firms is less responsive to positive sales growth. From these results we infer that the behaviour of state firms is affected by both insider rent sharing and binding budget constraints.

Financial constraints in investment:panel data results from Estonia, 1995–1999

To investigate investment behaviour the present study applies panel data techniques, in particular the Arellano-Bond (1991) GMM estimator, based on data on Estonian manufacturing firms from the period 1995-1999. We employ the model of optimal capital accumulation in the presence of convex adjustment costs. The main research findings are that domestic companies seem to be financially more constrained than those where foreign investors are present, and also, smaller firms are more constrained than their larger counterparts.