Fatores influenciadores da implementação de ações de gestão de segurança da informação :um estudo com executivos e gerentes de tecnologia da informação das empresas do Rio Grande do Norte

Information is one of the most valuable organization s assets, mainly on a global and highly competitive world. On this scenery there are two antagonists forces: on one side, organizations struggle for keeping protected its information, specially those considered as strategic, on the other side, the invaders, leaded by innumerous reasons - such as hobby, challenge or one single protest with the intention of capturing and corrupting the information of other organizations. This thesis presents the descriptive results of one research that had as its main objective to identify which variables influence the Executives´ and CIOs´ perceptions toward Information Security. In addition, the research also identified the profile of Rio Grande do Norte s organizations and its Executives/CIOs concerning Information Security, computed the level of agreement of the respondents according to NBR ISO/IEC 17799 (Information technology Code of practice for information security management) on its dimension Access Control. The research was based on a model, which took into account the following variables: origin of the organization s capital, sector of production, number of PCs networked, number of employees with rights to network, number of attacks suffered by the organizations, respondent´s positions, education level, literacy on Information Technology and specific training on network. In the goal´s point of view, the research was classified as exploratory and descriptive, and, in relation of the approach, quantitative. One questionnaire was applied on 33 Executives and CIOs of the 50 Rio Grande do Norte s organizations that collected the highest taxes of ICMS - Imposto sobre Circulação de Mercadorias on 2000. After the data collecting, cluster analysis and chi-square statistical tools were used for data analysis. The research made clear that the Executives and CIOs of Rio Grande do Norte s organizations have low level of agreement concerning the rules of the NBR ISO/IEC 17799. It also made evident that the Executives and CIOs have its perception toward Information Security influenced by the number of PCs networked and by the number of attacks suffered by the organizations

Aggressive behavior in the genus Gallus sp

The intensification of the production system in the poultry industry and the vertical integration of the poultry agribusiness have brought profound changes in the physical and social environment of domestic fowls in comparison to their ancestors and have modified the expression of aggression and submission. The present review has covered the studies focusing on the different aspects linked to aggressiveness in the genus Gallus. The evaluated studies have shown that aggressiveness and subordination are complex behavioral expressions that involve genetic differences between breeds, strains and individuals, and differences in the cerebral development during growth, in the hormonal metabolism, in the rearing conditions of individuals, including feed restriction, density, housing type (litter or cage), influence of the opposite sex during the growth period, existence of hostile stimuli (pain and frustration), ability to recognize individuals and social learning. The utilization of fighting birds as experimental material in the study of mechanisms that have influence on the manifestation of aggressiveness in the genus Gallus might comparatively help to elucidate important biological aspects of such behavior.

Efeito da temperatura ambiental na densidade e ponto de congelamento do leite de cabra

Seis cabras Pardas Alpinas com produção média de leite de 2,5kg/dia, foram distribuídas aleatoriamente em dois grupos de três cada, submetidas a termoneutralidade ou estresse térmico. Usou-se um delineamento estatístico crossover. Um período de adaptação de 28 dias foi seguido por quatro intervalos de 14 dias cada, durante os quais os animais sob estresse foram expostos à temperatura média do ar de 33,84ºC das 8 às 17 horas, incluindo radiação solar simulada das 10 às 15 horas. Na segunda semana de cada intervalo experimental amostras de leite individuais foram coletadas diariamente pela manhã e à tarde, adicionando-se conservador. No final da semana as amostras de cada ordenha foram misturadas formando-se amostras compostas nas quais foram efetuadas determinações de pH, acidez titulável, densidade e ponto crioscópico. Os resultados indicaram que os valores obtidos para densidade e ponto crioscópico são compatíveis aos encontrados por diversos autores em diferentes países. Constatou-se valor maior para densidade no leite ordenhado pela manhã, em relação ao da tarde, sendo que o intervalo desigual entre as ordenhas deve ter influído neste resultado. Não se verificou diferença estatística significativa para esta propriedade no leite das cabras em condições de termoneutralidade e de estresse térmico. Para o ponto crioscópico não se observou diferença estatística entre o leite ordenhado pela manhã e à tarde. Houve diferença estatística significativa para esta propriedade física entre o leite das cabras em condições de termoneutralidade e estresse térmico, sendo o valor médio maior, para as condições de termoneutralidade.

Estudo da degradação da biomassa de três espécies de plantas aquáticas no reservatório da UHE de Americana-SP

O estudo de decomposição de plantas aquáticas foi realizado na UHE de Americana-CPFL, com o objetivo de avaliar a taxa de degradação de plantas na própria água do reservatório. Foram consideradas como variáveis a profundidade (superfície, 3,5 e 7,0 m), as espécies de plantas aquáticas (Eichhornia crassipes, Brachiaria subquadripara e Pistia stratiotes) e o tipo de processamento a que estas foram submetidas (planta inteira, planta picada manualmente e com aplicação de fogo). Este estudo indicou que as espécies E. crassipes e P. stratiotes foram rapidamente decompostas no reservatório, ao contrário de B. subquadripara. Um outro fator importante observado foi a similaridade na decomposição das plantas, independentemente da profundidade testada. Essas diferenças devem ser consideradas na elaboração de planos de manejo e na previsão do impacto ambiental de programas de controle de plantas aquáticas.

Environmental adaptation of the source of the subbasin of Rico Stream, Monte Alto - SP, Brazil

Este trabalho teve como principal objetivo definir padrões fotográficos que representem o uso e a ocupação do solo da cabeceira de drenagem do Córrego Rico, localizada no Município de Monte Alto, Estado de São Paulo, para fins de adequação ambiental no que tange à legislação florestal brasileira. O mapeamento foi realizado utilizando técnicas de sensoriamento remoto e interpretação visual da imagem World View, seguida da digitalização da rede de drenagem e vegetações (naturais e agrícolas) no AutoCad, com auxílio de documentos e trabalho de campo. A área de estudo apresenta uma superfície de 2.141,53 ha, e os resultados permitiram constatar que a principal cultura é a cana-de-açúcar, com 546,34 ha, seguida de pastagens, com 251,22 ha, culturas perenes, com 191,71 ha, Eucalipto, com 57,31 ha, e a cebola, com 49,52 ha da área total, confirmando o avanço dos canaviais na região. A área possui 375,04 ha de áreas de preservação permanente (APPs), e desta superfície verificou-se que apenas 72,17 ha (19,24%) encontram-se compostos por vegetação arbórea ou mata, e destas 302,87 ha precisam ser enriquecidos e reflorestados com vegetação nativa da região, de acordo com legislação vigente. Os dados de área possibilitam futuras propostas de modelos de adequação ambiental para a microbacia, de acordo com a legislação ambiental vigente.

Efeitos do envelhecimento ambiental acelerado em compósitos poliméricos

The advantages of the use of vegetable fibers on the synthetic fibers, such as glass fibers, in the reinforcements in composites are: low cost, low density, good tenacity, good thermal properties and reduced use of instruments for their treatment or processing. However, problems related to poor performance of some mechanical natural fibers, have hindered its direct use in structural elements. In this sense, the emergence of alternative materials such as hybrids composites, involving natural and synthetic fibers, has been encouraged by seeking to improve the performance of structural composites based only on natural fibers. The differences between the physical, chemical and mechanical properties of these fibers, especially facing the adverse environmental conditions such as the presence of moisture and ultraviolet radiation, is also becoming a concern in the final response of these composites. This piece of research presents a comparative study of the strength and stiffness between two composite, both of ortoftalic polyester matrix, one reinforced with fibers of glass-E (CV) and other hybrid reinforced with natural fibers of curauá and fiberglass-E (CH). All the comparative study is based on the influence of exposure to UV rays and steam heated water in composites, simulating the aging environment. The conditions for the tests are accelerated through the use of the aging chamber. The composites will be evaluated through tests of uniaxial static mechanical traction and bending on three points. The composite of glass fiber and hybrid manufacturing industry are using the rolling manual (hand lay-up) and have been developed in the form of composites. All were designed to meet possible structural applications such as tanks and pipes. The reinforcements used in composites were in the forms of short fiber glass-E quilts (450g/m2 - 5cm) of continuous wires and fuses (whose title was of 0.9 dtex) for the curauá fibers. The results clearly show the influence of aging on the environmental mechanical performance of the composite CV and CH. The issues concerning the final characteristics of the fracture for all types of cargoes studied were also analyzed

Envelhecimento ambiental acelerado em PRF a base de tecidos híbridos kevlar/vidro: propriedades e instabilidade estrutural

There are a number of damaging mechanisms that various materials can suffer in service. However, when working with polymer composite materials, this is something that requires analysis, especially when exposed to adverse environmental conditions. Thus, the objective of the present thesis is the study of the direct influence of environmental aging and the form of hybridization of the reinforcement woven on the structural stability, surfacedegradation and fracture process of polymer composites laminates. For this, the development of two polymer composite laminates was necessary, where one of them was reinforced with a bi-directional woven with hybrid strandsofkevlar-49/glass-Efibers, and the other also with a bi-directionalwoven, however with weft and warpformed of alternating strandsof Kevlar-49 fibers and glass-E fiber The reinforcementwoven are industrially manufactured. Both laminates use a polyester resin as a matrixand are made up of four layers each. All laminates were industrially prepared by the hand lay-up method of manufacturing. To do this, test specimens were manufactured of the respective laminates and submitted to environmental aging accelerated through the aging chamber. They were exposed to alternating cycles of UV radiation and moisture (heated steam) for a standard defined period. At the end of the exposure period the specimens were subjected to mechanical tests of uniaxial tensile and bending in three points and to the characterizationsof the fracture and surface deterioration. In addition, they were submitted to a structural degradation assessment by the measurement of mass variation technique (MMVT) and the measurement of thickness variation technique (MTVT), this last technique being developed in this thesis. At the end of the analysis it was observed that the form of hybridization of the reinforcement woven and the aging process directly influence with losses or gain in mechanical properties, with losses in the structural degradation and in the formation and propagation of damage mechanism of the developedcomposite laminates

Laminados compósitos de PRFV: efeitos da descontinuidade geométrica e do envelhecimento ambiental acelerado

The growing demand in the use of composite materials necessitates a better understanding of its behavior related to many conditions of loading and service, as well as under several ways of connections involved in mechanisms of structural projects. Within these project conditions are highlighted the presence of geometrical discontinuities in the area of cross and longitudinal sections of structural elements and environmental conditions of work like UV radiation, moisture, heat, leading to a decrease in final mechanical response of the material. In this sense, this thesis aims to develop studies detailed (experimental and semi-empirical models) the effects caused by the presence of geometric discontinuity, more specifically, a central hole in the longitudinal section (with reduced cross section) and the influence of accelerated environmental aging on the mechanical properties and fracture mechanism of FGRP composite laminates under the action of uniaxial tensile loads. Studies on morphological behavior and structural degradation of composite laminates are performed by macroscopic and microscopic analysis of affected surfaces, in addition to evaluation by the Measurement technique for mass variation (TMVM). The accelerated environmental aging conditions are simulated by aging chamber. To study the simultaneous influence of aging/geometric discontinuity in the mechanical properties of composite laminates, a semiempirical model is proposed and called IE/FCPM Model. For the stress concentration due to the central hole, an analisys by failures criteria were performed by Average-Stress Criterion (ASC) and Point-Stress Criterion (PSC). Two polymeric composite laminates, manufactured industrially were studied: the first is only reinforced by short mats of fiberglass-E (LM) and the second where the reinforced by glass fiber/E comes in the form of bidirectional fabric (LT). In the conception configurations of laminates the anisotropy is crucial to the final mechanical response of the same. Finally, a comparative study of all parameters was performed for a better understanding of the results. How conclusive study, the characteristics of the final fracture of the laminate under all conditions that they were subjected, were analyzed. These analyzes were made at the macroscopic level (scanner) microscope (optical and scanning electron). At the end of the analyzes, it was observed that the degradation process occurs similarly for each composite researched, however, the LM composite compared to composite LT (configurations LT 0/90º and LT ±45º) proved to be more susceptible to loss of mechanical properties in both regarding with the central hole as well to accelerated environmental aging

Estudo do potencial poluidor da atividade de revenda de combustíveis líquidos na cidade de Natal (RN): justificativas para a implantação da rotulagem ambiental (Selo Verde)

This work presents the analysis of data collected by Universidade Federal do Rio Grande do Norte and State Public Prosecution Office experts concerning to current situation of liquid fuel resale stations, its forms of storage and its technical apparatus for the performance of primary functions (supply of vehicles) and secondary (car washing, storage of used oil, oil change etc.). The data presented were analyzed in the setting of the city of Natal (RN) and considering its characteristics, potentialities and weaknesses. Thereafter, it was discussed liquid fuels resale pollution potential in the city and legal provisions directed to implementation of Green Seal. The discussion involves three agents: environmental, legal and technical ones, applied to all 110 resale fuel stations which were analyzed

Envelhecimento ambiental em compósitos poliméricos à base de tecidos de reforços híbridos

The utilization of synthetic fibers for plastic reinforcement is more and more frequent and this growing interest requires that their mechanic behavior under the most variable conditions of structural applications be known. The use of such materials in the open and exposed to the elements is one of them. In this case, it becomes extremely necessary to study their mechanical properties (strength, stiffness) and the mechanism of fracture by which the environment aging them out. In order to do that, the material must be submitted to hot steam and ultraviolet radiation exposure cycles, according to periods of time determined by the norms. This study proposal deals with the investigation of accelerated environmental aging in two laminated polymeric composites reinforced by hybrid woven made up of synthetic fibers. The configurations of the laminated composites are defined as: one laminate reinforced with hybrid woven of glass fibers/E and Kevlar fibers/49 (LHVK) and the other laminate is reinforced with hybrid tissue of glass fibers/E and of carbon fibers AS4 (LHVC). The woven are plane and bidirectional. Both laminates are impregnated with a thermofix resin called Derakane 470-300 Epoxy Vinyl-Ester and they form a total of four layers. The laminates were industrially manufactured and were made through the process of hand-lay-up. Comparative analyses were carried out between their mechanical properties by submitting specimen to uniaxial loading tractions and three-point flexion. The specimen were tested both from their original state, that is, without being environmentally aging out, and after environmental aging. This last state was reached by using the environmental aging chamber

Otimização de sistema de bombeamento com energia eólica: sistema de bombeamento de São Gabriel/BA

After the Protocol of Kyoto and of the ECHO 92 - Rio de Janeiro, the attentions of the world focus to the preservation of the environment and of the maintainable use of the natural resources. People were looking for preserving environment for the future generations. Ever since, solutions are looked for the supply of energy in its more acquaintances forms and the substitution of the use of fossil fuels for the such alternative forms as: Photovoltaics, solar heat systems for water, wind , bio-diesel, etc. and in this context the Company of Engineering of the State of Bahia - Cerb changed a diesel pumping system by an wind one, It´s the first community system of this nature in Bahia. Facing problems with the model, a Cerb involved the academic segment of the Federal Center of Technological Education of Bahia Cefetba looking for a solution. This work intends to demonstrate the possibilities of optimization of the pumping communit system that supply water to approximately 50 people in the place of Romão, municipal district of São Gabriel-Ba. Technical reports were published in AGRENERGD2004-Unicamp SP and Scientific Magazine ETC,Cefetba, 2005. A simulation of the increase of energy is presented for heights of 15 and 20m, considering the eletromecanical balance from the pumping energy to the wind turbine. From the accomplished bibliographical revision, we emphasized the mechanical aspects of the engineering once in UFRN, those studies concentrate on the Department of Mechanical Engineering while, in others eletroelectronic are more emphasized. Finally, documents that we judged important were enclosed for the perfect understanding of this work

Eficiência e seletividade dos herbicidas trifloxysulfuron-sodium + ametryne e hexazinone + diuron em função da tecnologia de aplicação e do manejo mecânico da palha de cana-de-açúcar na linha de plantio

Com objetivo de otimizar a utilização de trifloxysulfuron-sodium + ametryne e hexazinone + diuron em função da adoção de diferentes pontas de pulverização e manejo mecânico da palha de cana-de-açúcar na linha de plantio, dois experimentos foram conduzidos na Destilaria Parálcool S/A, localizada em Paraguaçu Paulista/SP. No experimento 1, 12 tratamentos foram estudados em esquema fatorial 2 x 2 x 3, com quatro repetições, contrastando a presença e ausência de palha da cana na linha de plantio; dos herbicidas trifloxysulfuron sodium + ametryne (37 + 1.463 g i.a. ha-1 e 0,2% v/v de Aterbane®) e hexazinone + diuron (330 + 1.170 g i.a. ha-1 e 0,2% v/v de Aterbane®) e das pontas de pulverização XR11002-VS (128 L ha-1), AI11002-VS (200 L ha-1) e TF-VP5 (310 L ha-1). No experimento 2, a deposição da calda de pulverização nas plantas de cana-de-açúcar e Digitaria horizontalis, gerada pelas interações entre herbicidas e pontas, foi monitorada utilizando-se solução traçadora constituída por corante FDC-1 + herbicida. Os resultados sugerem que a presença da palhada da cultura proporcionou controle excelente das espécies infestantes mesmo na ausência do tratamento herbicida. O controle químico de D. horizontalis (6 folhas até 1-2 perfilhos) e Brachiaria decumbens (2 a 6 folhas) apresentou-se eficiente (> 91%) nas linhas sem palha a partir dos 14 DAA (dias após aplicação) para os herbicidas e pontas de pulverização estudados. D. horizontalis foi mais rapidamente controlada aos 7 DAA pelo trifloxysulfuron-sodium + ametryne com a ponta AI11002-VS. Houve toxicidade até os 21 DAA, sendo esta mais intensa para os tratamentos com hexazinone + diuron associado com as pontas AI11002-VS e TF-VP5, em decorrência da maior deposição do herbicida nas folhas da cultura.

Levantamento de plantas aquáticas no reservatório de Salto Grande, Americana-SP

O objetivo deste estudo foi determinar a frequência relativa e o nível de infestação de cada espécie da flora aquática presente no reservatório de Salto Grande, Americana-SP. O levantamento e a identificação das plantas aquáticas foram realizados percorrendo-se as margens do reservatório em uma embarcação. Ao longo dele foram estabelecidos 20 pontos de avaliação, sendo todos eles fotografados e georreferenciados. Foram atribuídos valores de 0 a 100% tanto para as espécies presentes como para os espaços livres de macrófitas aquáticas que eventualmente pudessem ocorrer dentro dos pontos amostrados. Com os dados referentes ao número de indivíduos e pontos avaliados, foi determinada a frequência relativa de cada espécie. Foram identificadas 13 espécies em todo o reservatório, sendo 12 vasculares e uma de alga-verde (Chlorella spp.). Entre as espécies vasculares, nove eram plantas emersas flutuantes, as quais poderiam estar ou não ancoradas no leito do reservatório: Alternanthera philoxeroides, Brachiaria subquadripara, Cyperus difformis, Echinochloa polystachia var. spectabilis, Eichhornia crassipes, Panicum rivulare, Pistia stratiotes, Salvinia auriculata e Typha angustifolia. Outras três espécies foram encontradas somente em solo firme alagado: Aeschynomene sensitiva, Hedychium coronarium e Mimosa pigra.

Projeto e Operação em Escala Semi-Industrial de um Equipamento para Tratamento de Águas Produzidas na Indústria do Petróleo Utilizando Nova Tecnologia: misturador-decantador à inversão de fases - MDIF

The aim of this work is to use a new technology in the treatment of produced wastewaters from oil industry. An unit for treat produced waters called UTMDIF, was designed, installed and operated in an industrial plant for treatment of effluents from oil industry. This unit operates by means of the method of separation of phase inversion and can become a promising alternative to solve the problem of oil/water separation. This method constitutes the basis of the working of a new design of mixersettler of vertical configuration which occupies small surface area. The last characteristic becomes specially important when there is limitation on the lay-out of the plant, for example, over maritime platforms to explore oil. This equipment in a semi-industrial scale treats produced wastewaters contaminated with oil at low concentrations (ranging from 30 to 150 mg/L) and throughputs of 320 m3/d (47,4 m3 m-2 h-1). Good results were obtained in oil/water separation which leads to the necessary specification to discharge those wastewaters. Besides, the non dependence of the efficiency of separation in spite of the salinity of the medium becomes the equipment an attractive new technology to treat wastewaters containing oil at low concentrations

Uso da tecnologia de troca iônica no tratamento de águas contaminadas com Nitrato do Aqüífero Dunas-Barreiras, Natal/RN-Brasil

The city of Natal comprises an area of about 170 km² (65,63 squares miles). The Dunas-Barreiras Aquifer is the most important reservoir of the coastal basin of RN. It is being responsible for the water supplying of about 70% of the population, however, due to the sewage disposal system by cesspools and drains, it is presently affected in a great extent by nitrates contamination. Thus, the present work proposes to research the utilization of contaminated water by nitrates of this fountainhead and find cost of the potable water through the ionic exchange technology. This technology consists in the removal of mineral salts by the exchange of cations for one ion of hydrogen (H+), through the passage of water by cationic resin bed and, secondly, by the exchange of the anions for hydroxyl ions (OH-) through a anionic resin bed. The obtained results have showed the waters derived from fountains, big water holes and shallow wells were microbiologically contaminated, while the waters derived from deep wells (above 70 m 76,58 yards) were free of contamination. Thus, only these ones are suitable to the use of ionic technology. The experiments were conducted with the resin IMAC-HP-555 such as kinetic, thermodynamic, and adsorption by fixed bed studies, being obtained several project variables for the experimental column, as follow: work temperature of 25oC; resin maximum capacity maximum e mean of adsorption ==0,01692 g NO3-1/g R e 0,0110 g NO3-1/g R, respectively. On the experimental column were performed breakthrough tests which pointed for an average ideal average speed of work of 13.2 m / h, with an average efficiency of 45% of adsorption, an optimal concentration of NaCl desorption of 8%, and an ideal desorption time of 80 minutes for the equilibrium conditions of water from the Dunas-Barreiras aquifer. Scale projection for ion-exchange column for denitrification, for these variables, using a computer modeling programme, to project the column of ion exchange ROREX-420/2000, obtained a cost for the drinking water denitrified by this system of R$ 0,16 / m3