Macroalgas epífitas de Zostera marina L. en Bahía Concepción, B.C.S., México

Macroalgas epífitas de Zostera marina L. en Bahía Concepción, B. C. S. México.

As versões portuguesas da GMFM-66 B&C e da GMFM-66 IS

A Gross Motor Function Measure (GMFM) é a medida de ouro para avaliar alterações na função motora ao longo do tempo ou em resposta a uma intervenção em crianças com Paralisia Cerebral (PC) (Russell D. , Rosenbaum, Avery, & Lane, 2002). Uma das barreiras à utilização mais frequente da GMFM é o seu tempo de administração, que dura entre 40 a 60 minutos. Para responder à necessidade de versões mais reduzidas da GMFM mas sem perder o seu carácter discriminativo e altamente sensível à mudança, foram publicadas as versões Gross Motor Function Measure- Item Sets (GMFM-66 IS) e a Gross Motor Function Measure Basal and Ceiling (GMFM-66-B&C), tornando a avaliação da função motora menos morosa, e assim melhorando a sua aplicabilidade. A GMFM-66 IS baseia-se num algoritmo para determinar quais os itens a serem avaliados e a GMFM-66 B&C tem como abordagem os efeitos de chão e teto de acordo com as idades e níveis do Sistema de Classificação da Função Motora Grosseira (SCFMG) (Brutton & Bartlett, 2011). O objetivo deste estudo foi criar as versões portuguesas da GMFM-IS e GMFM-B&C. Tratou-se de um estudo de natureza metodológica, descritivo, longitudinal em crianças com PC, dividido em duas fases: 1. Tradução e adaptação cultural e linguística da GMFM-66 IS e da GMFM-66 B&C; 2. Estudo de validação com análise da fiabilidade (coerência interna, reprodutibilidade e fiabilidade inter-observador), validade e poder de resposta. A amostra em estudo foi constituída por 100 crianças com PC com idades compreendidas entre os 2 e os 12 anos, representativa de todos os 5 níveis do Sistema de Classificação da Função Motora Global. As versões portuguesas da GMFM-66-IS e da GMFM-66-B&C apresentam equivalência conceptual e semântica com as versões originais revelando fácil aplicabilidade. Demonstrou-se que as versões reduzidas portuguesas da GMFM apresentam muito boa consistência interna, com valores globais do Alfa de Cronbach de 0,998, muito boa concordância entre os avaliadores (ICC de 0,998 para a GMFM-66-B&C e de 0,999 para a GMFM-66-IS), e com valores de fiabilidade intra-observador excelentes (ICC de 0,999 para a GMFM-66-B&C e de 1,000 para a GMFM-66-IS). Quanto ao poder de resposta os resultados não foram tão expressivos, provavelmente comprometidos por uma amostra demasiado pequena. As versões portuguesas da GMFM-66-IS e da GMFM-66-B&C revelaram ter características psicométricas adequadas à sua aplicação em PC, necessitando, no entanto, de mais investigação relativamente à sua capacidade de detetar mudança como resultado de intervenções.

TRIBUNAL ARBITRAL DE NOARCO S.A., VIC. LIMITADA Y OBRAS ESPECIALES OBRESCA C.A. VS. EMPRESA DE ACUEDUCTO Y ALCANTARRILLADO DE BOGOTÁ (E.A.A.B. E.S.P.)

850

A B C ou aleph ba’a ta’a : représentations du système d’écriture de l’enfant libanais

Cette recherche vise à décrire les liens entre les représentations des enfants dans deux systèmes d’écriture: alphabétique et consonantique. Cette étude transversale est déployée auprès de 60 enfants libanais âgés entre 4 et 6 ans. Les écritures des enfants autour de huit mots sont récoltées en français et en arabe. Les résultats ne montrent aucune différence significative entre les deux systèmes d’écriture aux âges de 4 et 5 ans. C’est à l’âge de 6 ans que des différences significatives se présentent entre les deux langues. Les résultats montrent une différence significative des écritures en fonction de l’âge. Ces résultats soutiennent l’hypothèse développementale d’une structuration unique inductive quant aux codes alphabétique français et consonantique arabe. Cette structuration se distingue pour chacune des langues lors de l’entrée formelle dans l’écrit. Descripteurs: 1- émergence, 2- littératie, 3- écriture provisoire, 4- français, 5- arabe

Landscape strategies in Bronze Age Southwestern Cyprus (2500-1100 B.C.)

This thesis concerns the analysis of the socio-economic transformation of communities in Bronze Age southwestern Cyprus. Through the adoption of a dialectical perspective of analysis, individuals and environment are considered part of the same unity: they are cooperating agents in shaping society and culture. The Bronze Age is a period of intense transformation in the organization of local communities, made of a continuous renegotiation of the socio-economic roles and interactions. The archaeological record from this portion of the island allows one to go beyond the investigation of the complex and articulated transition from the EBA-MBA agro-pastoral and self-sufficient communities to the LBA centralized and trade-oriented urban-centres. Through a shifting of analytical scales, the emerging picture suggests major transformations in the individual-community-territory dialectical relations. A profound change in the materials conditions of social life, as well as in the superstructural realm, was particularly entailed by the dissolution of the relation to the earth, due to the emergence of new forms of land exploitation/ownership and to the shift of the settlement pattern in previously unknown areas. One of the key points of this thesis is the methodological challenge of working with legacy survey data as I re-analysed a diverse archaeological legacy, which is the result of more than fifty years of survey projects, rescue and research-oriented excavations, as well as casual discoveries. Source critique and data evaluation are essential requirements in an integrative and cross-disciplinary regional perspective, in the comprehensive processing of heterogeneous archaeological and environmental datasets. Through the estimation of data precision and certainty, I developed an effective - but simple - method to critically evaluate existing datasets and to inter-correlate them without losing their original complexity. This powerful method for data integration can be applied to similar datasets belonging to other regions and other periods as it originates from the evaluation of larger methodological and theoretical issues that are not limited to my spatial and temporal focus. As I argue in this thesis, diverse archaeological legacies can be efficiently re-analysed through an integrative and regional methodology. The adoption of a regional scale of analysis can provide an excellent perspective on the complexity of transformations in ancient societies, thus creating a fundamental bridge between the local stories and grand landscape narratives.

Interferon-free therapy for hepatitis C, how prepared is Australia for biosimilars?

The Hepatitis C virus (HCV) affects some 150 million people worldwide. However, unlike hepatitis A and B there is no vaccination for HCV and approximately 75% of people exposed to HCV develop chronic hepatitis. In Australia, around 226,700 people live with chronic HCV infection costing the government approximately $252 million per year. Historically, the standard approved/licenced treatment for HCV is pegylated interferon with ribavirin. There are major drawbacks with interferon-based therapy including side effects, long duration of therapy, limited access and affordability. Our previous survey of an at-risk population reported HCV treatment coverage of only 5%. Since April 2013, a new class of interferon-free treatments for chronic HCV is subsidised under the Pharmaceutical Benefits Scheme: boceprevir and telaprevir - estimated to cost the Australian Government in excess of $220 million over five years. Other biologic interferon-free therapeutic agents are scheduled to enter the Australian market. Use of small molecule generic pharmaceuticals has been advocated as a means of public cost savings. However, with the new biologic agents, generics (biosimilars) may not be feasible or straightforward, due to long patent life; marketing exclusivity; and regulatory complexity for these newer products.

Left-handed helices for DNA: studies on poly[d(I-C)]

Earlier, we showed that, for the D form (n = 8 and h = 3.03 A, where n is number of nucleotide units per turn and h is height per nucleotide unit) of poly[d(A-T)], both right- and left-handed double helical models are stereochemically satisfactory and give good agreement with the observed fiber diffraction data. It was also noted that the conformations of the right- and left-handed D-DNA models are very similar to those of the right- and left-handed B-DNA models. This observation was consistent with the D leads to B transition in the solid phase. As a continuation of our earlier studies, we have carried out similar experiments with poly[d(I-C)]. We could obtain a crystalline D-form pattern (n = 8, h = 3.13 A) of the fiber at 75% relative humidity (r.h.); the hydrated (r.h. approximately equal to 95%) form of the same fiber gave the classical B-form pattern (n = 10, h = 3.40 A). In the present report, we show that both right- and left-handed double-helical models are consistent with the fiber diffraction data of poly[d(I-C)] in the D-form. Theoretical energy calculations also suggest that the right- and left-handed B- and D-DNA models are almost equally stable. Hence, we conclude that the right- and left-handed double-helical models of poly[d(I-C)] in a given form (B or D) are equally likely and that the fiber diffraction data do not permit discrimination.

Morphological and developmental comparisons of seven greens quality hybrid bermudagrass (Cynodon dactylon (L.)Pers.x C transvaalensis Burtt-Davy

Fine-textured hybrid bermudagrass [Cynodon dactylon (L.) Pers. x C. transvaalensis Burtt-Davy] cultivars have been widely used for golf putting greens and lawn bowls greens in warm-climate areas for more than 40 years. During the past decade, the choice of cultivar for professional turfgrass managers has been expanded by a range of secondgeneration hybrid bermudagrasses, which differ from the first-generation cultivars ‘Tifgreen’ and ‘Tifdwarf ’ in their management requirements. In this paper, we present comparative morphological and developmental data for seven cultivars (Champion Dwarf, FloraDwarf, MS-Supreme, Novotek, Tifdwarf, TifEagle, Tifgreen) grown in spaced plant and sward experiments at Cleveland, Australia (27º32’S lat, 153º15’E long, 25 masl). The four ‘ultradwarf ’ cultivars (Champion Dwarf, MS-Supreme, FloraDwarf, TifEagle) showed slower vertical extension and produced fewer inflorescences than Tifdwarf, Tifgreen, and Novotek. However, in terms of the length of stolon internodes and their overall rate of lateral spread, Champion Dwarf, FloraDwarf, and TifEagle were comparable to Tifdwarf; MS-Supreme (with longer internodes) spread faster laterally, though slower than Tifgreen (which had the longest stolon internodes). In unmown swards, the four ultradwarfs produced shorter leaves than Tifgreen, Tifdwarf, and Novotek, but only Champion Dwarf produced significantly narrower leaves than Tifgreen, Tifdwarf, and Novotek, with TifEagle leaves also significantly narrower than those of Tifgreen and Novotek. Minimum threshold temperatures for growth were approximately 9° to 10°C (air temperature) and 15° to 16°C at 10 cm soil depth.

Elastic modulus of Ti-6Al-4V-xB alloys with B up to 0.55 wt.%

An anomalous variation in the experimental elastic modulus, E, of Ti-6Al-4V-xB (with x up to 0.55 wt.%) is reported. Volume fractions and moduli of the constituent phases were measured using microscopy and nanoindentation,respectively. These were used in simple micromechanical models to examine if the E values could be rationalized. Experimental E values higher than the upper bound estimates suggest complex interplay between microstructural modifications, induced by the addition of B, and properties.

Peptide mimics for structural features in proteins. Crystal structures of three heptapeptide helices with a C-terminal 6-->1 hydrogen bond.

The crystal structure determination of three heptapeptides containing alpha-aminoisobutyryl (Aib) residues as a means of helix stabilization provides a high-resolution characterization of 6-->1 hydrogen-bonded conformations, reminiscent of helix-terminating structural features in proteins. The crystal parameters for the three peptides, Boc-Val-Aib-X-Aib-Ala-Aib-Y-OMe, where X and Y are Phe, Leu (I), Leu, Phe (II) and Leu, Leu (III) are: (I) space group P1, Z = 1, a = 9.903 A, b = 10.709 A, c = 11.969 A, alpha = 102.94 degrees, beta = 103.41 degrees, gamma = 92.72 degrees, R = 4.55%; (II) space group P21, Z = 2, a = 10.052 A, b = 17.653 A, c = 13.510 A, beta = 108.45 degrees, R = 4.49%; (III) space group P1, Z = 2 (two independent molecules IIIa and IIIb in the asymmetric unit), a = 10.833 A, b = 13.850 A, c = 16.928 A, alpha = 99.77 degrees, beta = 105.90 degrees, gamma = 90.64 degrees, R = 8.54%. In all cases the helices form 3(10)/alpha-helical (or 3(10)helical) structures, with helical columns formed by head-to-tail hydrogen bonding. The helices assemble in an all-parallel motif in crystals I and III and in an antiparallel motif in II. In the four crystallographically characterized molecules, I, II, IIIa and IIIb, Aib(6) adopts a left-handed helical (hL) conformation with positive phi, psi values, resulting in 6-->1 hydrogen-bond formation between Aib(2) CO and Leu(7)/Phe(7) NH groups. In addition a 4-->1 hydrogen bond is seen between Aib(3) CO and Aib(6) NH groups. This pattern of hydrogen bonding is often observed at the C-terminus of helices proteins, with the terminal pi-type turn being formed by four residues adopting the hRhRhRhL conformation.

Conformations of three heterocyclicperhydropyrrolobenzofurans and polymeric assembly via co-operative inter-molecular C-H center dot center dot center dot O hydrogen bonds

In 1-cyclo-hexyl-6,6,8a-trimethyl-3a,6,7,8a-tetra-hydro-1H-1-benzofuro[2,3-b]pyrrole-2,4(3H,5H)-dione, C19H27NO3, (I), and the isomorphous compounds 6,6,8a-trimethyl-1-phenyl-3a,6,7,8a-tetra-hydro-1H-1-benzofuro[2,3-b]pyrrole-2,4(3H,5H)-dione, C19H21NO3, (II), and 6,6,8a-trimethyl-1-(3-pyridyl)-3a,6,7,8a-tetra-hydro-1H-1-benzofuro[2,3-b]pyrrole-2,4(3H,5H)-dione, C18H20N2O3, (III), the tetra-hydro-benzo-dihydro-furo-pyrrolidine ring systems are folded at the cis junction of the five-membered rings, giving rise to a non-planar shape of the tricyclic cores. The dihydro-furan and pyrrolidine rings in (I) are puckered and adopt an envelope conformation. The cyclo-hexene rings adopt a half-chair conformation in all the mol-ecules, while the substituent N-cyclo-hexyl ring in (I) assumes a chair form. Short intra-molecular C-HcO contacts form S(5) and S(6) motifs. The isomorphous compounds (II) and (III) are effectively isostructural, and aggregate into chains via inter-molecular C-HcO hydrogen bonds.

Conformations of three heterocyclic perhydropyrrolobenzofurans and polymeric assembly via co-operative inter-molecular C-H center dot center dot center dot O hydrogen bonds

In 1-cyclo-hexyl-6,6,8a-trimethyl-3a,6,7,8a-tetra-hydro-1H-1-benzofuro2, 3-b]pyrrole-2,4(3H,5H)-dione, C19H27NO3, (I), and the isomorphous compounds 6,6,8a-trimethyl-1-phenyl-3a,6,7,8a-tetra-hydro-1H-1-benzofuro2,3-b]p yrrole-2,4(3H,5H)-dione, C19H21NO3, (II), and 6,6,8a-trimethyl-1-(3-pyridyl)-3a,6,7,8a-tetra-hydro-1H-1-benzofuro2, 3-b]pyrrole-2,4(3H,5H)-dione, C18H20N2O3, (III), the tetra-hydro-benzo-dihydro-furo-pyrrolidine ring systems are folded at the cis junction of the five-membered rings, giving rise to a non-planar shape of the tricyclic cores. The dihydro-furan and pyrrolidine rings in (I) are puckered and adopt an envelope conformation. The cyclo-hexene rings adopt a half-chair conformation in all the mol-ecules, while the substituent N-cyclo-hexyl ring in (I) assumes a chair form. Short intra-molecular C-HcO contacts form S(5) and S(6) motifs. The isomorphous compounds (II) and (III) are effectively isostructural, and aggregate into chains via inter-molecular C-HcO hydrogen bonds.

Sika- ja siipikarjatalouden rakennemuutoskorvaus C-tukialueella

Sika- ja siipikarjatilojen määrä Suomessa on vähentynyt koko EU-jäsenyyden ajan tuotannon keskittyessä yhä suurempiin yksiköihin. Tuotantomäärät ovat kasvaneet, mutta viljelijöiden tulotaso on alentunut, joten maatalouden ulkopuoliset ammatit houkuttelevat luopumaan eläinten pidosta tai maataloudesta kokonaan. Sika- ja siipikarjatalouden rakennemuutoksen taloudellisena kannustimena otettiin vuonna 2009 käyttöön sika- ja siipikarjatalouden rakennemuutoskorvaus, jota maksetaan kompensaationa sika- ja siipikarjataloudesta luopuville viljelijöille. Tämän työn tarkastelukohteena on rakennemuutoskorvaus C-tukialueella, jossa yksinään on lähes yhtä paljon sika- ja siipikarjatiloja kuin A- ja B-alueilla yhteensä. Tutkimuksen tavoitteena on selvittää, millaiset sika- ja siipikarjatilat sekä koko C-alueella että C-alueen eri osissa ovat hakeneet rakennemuutoskorvausta ja miten tilat ovat alueellisesti sijoittuneet. Maatalouden rakennepolitiikalla pyritään vaikuttamaan maatalouden yhteiskunnalliseen rakenteeseen. Rakennepoliittisilla toimilla pyritään vähentämään viljelijöiden ja tilojen määrää, jolloin maataloustulo jakaantuu pienemmälle viljelijämäärälle taaten heille suuremmat tulot. Maatalouden rakennemuutosta tapahtuu, kun maatalouden rakenteessa tapahtuu tietyllä aikavälillä muutos. Rakennemuutoksessa ja -kehityksessä on alueellisia eroja. Aluetaloustiede pyrkii selittämään, mistä alueelliset erot johtuvat ja miksi alueet erilaistuvat. Suomessa eri maakunnilla on eroja ja omia alueellisia ominaispiirteitään, joilla on suuri merkitys alueen työllisyyteen ja väestön sijoittumiseen alueella. Eri maakunnissa työllisyystilanne on vaihteleva, mutta joka maakunnassa on kuitenkin työvoimapulaa useissa sellaisissa ammateissa, joihin eläinten tai tilan pidon lopettavien viljelijöiden olisi mahdollista työllistyä. Sika- ja siipikarjatalouden rakennemuutoskorvaus on kansallinen kotieläintuki, jota maksetaan tilakohtaisen viitemäärän perusteella tiloille, jotka ovat juuri lopettaneet sika- ja siipikarjatuotantonsa tai aikovat sen lopettaa. Korvausta on voitu maksaa tukiehdot täyttävälle tuenhakijalle joko vuosina 2009–2010 tai vuosina 2010–2011 ja sen maksimimäärä on tilaa kohden enintään 20000 euroa vuodessa. Kahden korvausvuoden jälkeen tilan viitemäärä lakkautetaan ja sen jälkeen tilalle ei enää makseta sika- ja siipikarjatalouden tukia. Tilan on kuitenkin edelleen mahdollista jatkaa sika- ja siipikarjatuotantoaan markkinaehtoisena. Tutkimuksen aineisto on 389 tilan tiedot sisältävä Tiken raportti tukityypin 1612 (sika- ja siipikarjatalouden rakennemuutoskorvaus, pohjoinen) tukihakutiedoista vuodelta 2010. Tutkimusote oli kvantitatiivinen ja koska havaintoaineisto kattaa kaikki C-alueen korvauksenhakijat, tehtiin tutkimus kokonaistutkimuksena. Tutkimustulosten mukaan 63 % korvausta hakeneista tiloista sijoittuu C1-alueelle ja 54 % Etelä-Pohjanmaalle ja Pohjanmaalle. Kuntatasolla eniten rakennemuutoskorvaustiloja oli Närpiössä. C-alueella tuenhakijat olivat iältään 20–71-vuotiaita. Hakijoista 62 % harjoitti päätuotantosuuntanaan viljanviljelyä ja peltoalaa kaikilla hakijoilla oli hallinnassaan lähes 16000 ha. Rakennemuutoskorvausta maksettiin C-alueella yhteensä yli 2,3 miljoonaa euroa. Kun rakennemuutoskorvauksen viitemäärät kahden korvausvuoden jälkeen lakkautetaan, poistuu tuo-tannosta yli 9600 ey. Sekä C-alueella että kaikki ELY-keskukset huomioiden oli korvauksenhakijoita kaikkia ikäluokkia tarkasteltaessa eniten 50–59-vuotiaissa. Eniten hakijoita oli viitemääräluokassa 10,01–20 ey ja viljelyalaluokassa 25,01–40 ha, vähiten luokissa 40,01–50 ey ja 50,01 ey tai enemmän sekä 150,01 ha tai enemmän. Yleisin maksuluokka oli 3000,01–4500 euroa, harvinaisin 15000,01–20000 euroa. Rakennemuutoskorvauksella saavutettuja hyötyjä ja kustannuksia on toistaiseksi vaikea määritellä, koska vuoden 2011 maksatus on vielä kesken.

The oxygen potential of the systems Fe+FeCr2O4+ Cr2O3 and Fe+FeV2O4+ V2O3 in the temperature range 750 1600o C

From electromotive force (emf) measurements using solid oxide galvanic cells incorporating ZrOz-CaO and ThOz-YO~.s electrolytes, the chemical potentials of oxygen over the systems Fe + FeCrzO 4 + Cr20 ~ and Fe + FeV204 + V203 were calculated. The values may be represented by the equations: 2Fe(s, I) + Oz(g) + 2Cr2Oa(s) -- 2FeCr204 (s)Akto2 = - 151,400 + 34.7T (• cal= -633,400 + 145.5T(• J (750 to 1536~ A~tO2 = -158,000 + 38.4T(• cal= -661,000 + 160.5T(*1250) J (1536 to 1700~2Fe (s, I) + O2 (g) + 2V203 (s) -- 2FeV204 (s) A/~Oz = - 138,000 + 29.8T(+300) cal= - 577,500 + 124.7T (• J (750 to 1536~A/IO2 = -144,600 + 33.45T(-300) cal = -605,100 + 140.0T(~-1250) J (1536 to 1700~At the oxygen potentials corresponding to Fe + FeCrzO a + Cr203 equilibria, the electronic contribution to the conductivity of ZrO2-CaO electrolyte was found to affect the measured emf. Application of a small 60 cycle A.C. voltage with an amplitude of 50 mv across the cell terminals reduced the time required to attain equilibrium at temperatures between 750 to 9500C by approximately a factor of two. The second law entropy of iron chromite obtained in this study is in good agreement with that calculated from thermal data. The entropies of formation of these spinel phases from the component oxides can be correlated to cation distribution and crystal field theory.

Structure and mechanical properties of Ti-C films deposited using combination of pulsed DC and normal DC magnetron co-sputtering

Titanium-carbon (Ti-C) thin films of different compositions were prepared by a combination of pulsed DC (for Ti target) and normal DC (for graphite target) magnetron co-sputtering on oxidized silicon and fused quartz substrates. At 33.7 at.% of C content, pure hcp Ti transforms into fcc-TiC with a preferential orientation of (2 2 0) along with (1 1 1) and (2 0 0). A clear transformation in the preferential orientation from (2 2 0) to (1 1 1) has been observed when the C content was increased to 56 at.%. At 62.5 at.% of C, TiC precipitates in an amorphous carbon matrix whereas further increase in C leads to X-ray amorphous films. The cross-sectional scanning electron microscope images reveal that the films with low carbon content consists of columnar grains, whereas, randomly oriented grains are in an amorphous carbon matrix at higher carbon content. A dramatic variation was observed in the mechanical properties such as hardness, H, from 30 to 1 GPa and in modulus, E, from 255 to 25 GPa with varying carbon content in the films. Resistance to plastic deformation parameter was observed as 0.417 for films containing 62.5 at.% of C. Nanoscratch test reveals that the films are highly scratch resistant with a coefficient of friction ranging from 0.15 to 0.04. (C) 2012 Elsevier B.V. All rights reserved.