A case for optimising fracture healing through inverse dynamization

The mechanical conditions in the repair tissues are known to influence the outcome of fracture healing. These mechanical conditions are determined by the stiffness of fixation and limb loading. Experimental studies have shown that there is a range of beneficial fixation stiffness for timely healing and that fixation stiffness that is either too flexible or too stiff impairs callus healing. However, much less is known about how mechanical conditions influence the biological processes that make up the sequence of bone repair and if indeed mechanical stimulation is required at all stages of repair. Secondary bone healing occurs through a sequence of events broadly characterised by inflammation, proliferation, consolidation and remodelling. It is our hypothesis that a change in fixation stiffness from very flexible to stiff can shorten the time to healing relative to constant fixation stiffness. Flexible fixation has the benefit of promoting greater callus formation and needs to be applied during the proliferative stage of repair. The greater callus size helps to stabilize the fragments earlier allowing mineralization to occur faster. Together with stable/rigid fixation applied during the latter stage of repair to ensure mineralization of the callus. The predicted benefits of inverse dynamization are shortened healing in comparison to very flexible fixation and healing time comparable or faster than stable fixation with greater callus stiffness.

Child mental health after parental separation: The impact of resident/non-resident parenting, parent mental health, conflict and socioeconomics

Children of separated parents tend to have poorer mental health than children of intact families. Explanations to date have tended to focus on resident mothers, neglecting the potential importance of non-resident fathers. Using recent data from the Longitudinal Study of Australian Children, and independent teacher-reports of child mental health, this study 1) compares the mental health of children with resident and non-resident fathers and 2) explores predictors of poor mental health among children with a non-resident father. Children with a non-resident father had poorer mental health than those with a resident father, but this difference was explained fully by exposure to parental conflict, and to a lesser extent by socioeconomic status, parenting, and parent mental health. For children with a non-resident father, the strongest predictors of child mental health were mothers' employment and maternal parenting consistency. Policy implications are discussed.

Modelling, collaboration and integration : a case study for the delivery of public buildings

An evolution in the use of digital modelling has occurred in the Queensland Department of Public Works Division of Project Services over the last 20 years from: the initial implementation of computer aided design and documentation (CADD); to experimentation with building information modelling (BIM); to embedding integrated practice (IP); to current steps towards integrated project delivery (IPD) including the active involvement of consultants and contractors in the design/delivery process. This case study is one of three undertaken through the Australian Sustainable Built Environment National Research Centre investigating past R&D investment. The intent of these cases is to inform the development of policy guidelines for future investment in the construction industry in Australia. This research is informing the activities of CIB Task Group 85 R&D Investment and Impact. The uptake of digital modelling by Project Services has been approached through an incremental learning approach. This has been driven by a strong and clear vision with a focus on developing more efficient delivery mechanisms through the use of new technology coupled with process change. Findings reveal an organisational focus on several areas including: (i) strategic decision making including the empowerment of innovation leaders and champions; (ii) the acquisition and exploitation of knowledge; (iii) product and process development (with a focus on efficiency and productivity); (iv) organisational learning; (v) maximising the use of technology; and (vi) supply chain integration. Key elements of this approach include pilot projects, researcher engagement, industry partnerships and leadership.

Critical attributes of public-private partnerships : a case study in vocational education

The term ‘partnership’ is increasingly used by governments, industry, community organisations and schools in supporting their daily businesses. Similar to the terms ‘ICT’ and ‘learning’, ‘partnerships’ are now ubiquitous in policy discourse. Yet, the term remains ill-defined and ambiguous. This study reviews and reflects on a government led industry-school partnership initiative in the state of Queensland, Australia, to understand how the term is used in this initiative. Given the frequent use of Public Private Partnership (PPP) language, PPP was used as a framework to review this initiative. The methodology of this qualitative case study involved consultations with stakeholders and an analysis of Gateway schools documents, policy documents, and literature. The review suggests that despite the use of terminology akin to PPP projects in Gateway school and policy documents, the implicit suggestion that this initiative is a public-private partnership is untenable. The majority of principles shaping a PPP have not been considered to a significant extent in the Gateway project. Although the review recognises the legitimate and sincere purpose of the Gateway schools initiative, the adoption of a PPP framework during the design, monitoring, or evaluation stages could have strengthened the initiative in terms of outcomes, benefits, and sustainability.

Layered silicates in Chondritic Porous Aggregate W7029*A : a case of primary growth

An important subset of extraterrestrial particles that reach the Earth's stratosphere include the so-called Chondritic Porous Aggregates (CPA's) [1-3]. In general, CPA's have a fluffy morphology and consist of numerous (>104)subparticles that are often <100A in size [4]. Mineral species in CPA's include Mg-rich pyroxene and olivine, Fe- and (Fe,Ni)-sulphides, taenite, Fe,Ni-carbides, magnetite, Ti-metal, a Bi-phase (metal or oxide), and variable amounts of carbonaceous material [1, 5-7]. Hydrated silicates are rare in CPA's and are limited to aggregates that have not been severely altered (thermo-metamorphosed) during atmospheric entry [8]. The presence of hydrated silicates in one cosmic dust particle was established by X-ray diffraction [2] and has been inferred in others by infra-red spectroscopy [8]. If CPA's are cometary, their mineralogy and morphology suggest that at least two episodes of aggregation occurred and that variations in porosity may be related to local differences in ice-to-dust ratio [3].

Education for sustainability : a case study of pre-service primary teachers' knowledge and efficacy

This study investigated the relationships between knowledge and efficacy for teaching sustainability in a sample of 266 pre-service primary teachers at a large, metropolitan university in Australia. A survey gathered information about the participant’s attitudes and self-efficacy for education for sustainability, along with their perceived and actual knowledge of environmental sustainability issues. The participants typically believed they were confident in their abilities to engage with education for sustainability with self-efficacy increasing with increased levels of perceived knowledge. However no relationship was found between perceived knowledge and actual knowledge which suggests that the participants either do not feel constrained by their lack of knowledge, or are perhaps unaware of their actual knowledge of sustainability issues. This lack of relationship may have implications for the development of pedagogical content knowledge with pre-service teachers potentially developing shallow, tokenistic approaches to Education for Sustainability.

WebAIRS - A case study : how the multidisciplinarity of IS can save lives

This paper presents a case study chronicling the development of WebAIRS, an Australasian national anaesthetic incident reporting database for health care practitioners. WebAIRS is an example of the multidisciplinary nature of the IS discipline, incorporating IS theories, tools and principles in the creation of an IT artefact with significant real world application. This case study introduces the background of the project and the motivations for its conception including the need for critical incident reporting in anaesthesia, the process of its development using IT students and the problems identified following its national release among the anaesthetic community. The paper demonstrates the evolution of contemporary IS research and the IT artefact, and how each can be crucial foundations for hospitals of the future

Convergence of corporate social responsibility and corporate governance in weak economies : the case of Bangladesh

The convergence of corporate social responsibility (CSR) and corporate governance (CG) has changed the corporate accountability mechanism. This has developed a socially responsible ‘corporate self-regulation’, a synthesis of governance and responsibility in the companies of strong economies. However, unlike in the strong economies, this convergence has not been visible in the companies of weak economies, where the civil society groups are unorganised, regulatory agencies are either ineffective or corrupt and the media and non-governmental organisations do not mirror the corporate conscience. Using the case of Bangladesh, this article investigates the convergence between CSR and CG in the self-regulation of companies in a less vigilant environment.

Conflicts over protection of marine living resources : the ‘Volga Case’ revisited

Non-traditional maritime security concerns have become more importantthan ever in the post-Cold War era. Naval forces of most developedcountries are more concerned about these threats than conventional war.One of the main maritime security issues for many countries in the world isillegal, unreported and unregulated (IUU) fishing in the marine area. Withthese burgeoning issues comes the potential for a large number of disputesinvolving international law. In early 2002, a long-line fishing vessel under aRussian flag –the Volga, was detained by Australian authorities a few hundred meters outside the Exclusive Economic Zone of Australia’s Heard and McDonald Islands in the Southern Ocean. The vessel was reportedly engaged in illegal fishing. This incident gave birth to litigation in international and Australian courts. Apart from these cases, Russia also announced separate litigation against Australia for violation of Articles 111and 87 of the United Nations Convention on the Law of the Sea (NCLOS).Considering the outcome of these cases, this article critically examines thecharacteristics of litigation as a strategy for pacific settlement of disputesover marine living resources. Using the Volga Case as an example, thisarticle explores some issues related to the judicial settlement of disputes over marine living resources. This article demonstrates that the legal certainty of winning a case may not be the only factor influencing the strategy for settlement of an international dispute.

Re-strengthening 20th century architectural heritage : A case study of Brisbane City Hall restoration

Restoring old buildings to conform the current building policies and standards is a great challenge to engineers and architects. The restoration of the Brisbane City Hall, a heritage building listed by the State of Queensland in Australia, developed an innovative approach to upgrade the building using the method called ‘concrete overlay’ following the guidelines of both the International Council on Monuments and Sites and the Burra Charter of Australia. Concrete overlay is a new method of structural strengthening by drilling new reinforcement and placing new concrete on top of the existing structure, akin to a bone transplant or bone grafting in the case of a human being. This method is popularly used for newer bridges which have suffered load stresses. However, this method had never been used on any heritage buildings which were built on different conditions and standards. The compatibility of this method is currently being monitored. Most of the modern historic buildings are rapidly deteriorating and require immediate interventions in order to be saved. As most of these heritage buildings are on the stage of advanced deterioration, significant attempts are being made and several innovations are being applied to upgrade these structures to conform with the current building requirements. To date, the knowledge and literature in regarding ‘concrete cancer’ in relation to rehabilitating these reinforced concrete heritage structures is significantly lacking. It is hoped that the method of concrete overlay and the case study of Brisbane City Hall restoration will contribute to the development of restoration techniques and policies for Modern Heritage Buildings.

Improving the Walkability of Subtropical Urban Areas: a case study analysis for the development of a design process

This research develops a new framework to be used as a tool for analysing and designing walkable communities. The literature review recognises the work of other researchers combining their findings with the theory of activity nodes and considers how a framework may be used on a more global basis. The methodology develops a set of criteria through the analysis of noted successful case studies and this is then tested against an area with very low walking rates in Brisbane, Australia. Results of the study suggest that as well as the accepted criteria of connectivity, accessibility, safety, security, and path quality further criteria in the form or planning hierarchy, activity nodes and climate mitigation could be added to allow the framework to cover a broader context. Of particular note is the development of the nodal approach, which allows simple and effective analysis of existing conditions, and may also prove effective as a tool for planning and design of walkable communities.

Lost in translation, found in translation : A case study of working psychodynamically in an interpreter-assisted setting

Effective use of psychotherapeutic treatment in interpreter-assisted settings is well established; however, there has been little discussion of the use of psychodynamically-informed treatments in such settings. The literature suggests that therapy facilitated by interpreters is not conducive to psychodynamic approaches due to the presence of a third person, the perceived lack of intimacy, and the difficulties of working with translated material. However, transference, countertransference and other unconscious communications and responses necessarily occur in every therapeutic setting, including triadic therapy using interpreters. This paper describes a short-term (12 session) psychodynamically-oriented intervention with a 52-year old Cantonese-speaking man suffering from depression. A female, Chinese-born interpreter assisted in every session. The integral role of supervision in supporting a containing relationship between the therapist and the patient and the difficult emotional responses experienced by the interpreter is highlighted. The paper attempts to trace some of the unconscious communications that occurred during the therapy and demonstrates the feasibility of working psychodynamically in an interpreter-assisted setting.

Computer experiment – a case study for modelling and simulation of manufacturing systems

Deterministic computer simulation of physical experiments is now a common technique in science and engineering. Often, physical experiments are too time consuming, expensive or impossible to conduct. Complex computer models or codes, rather than physical experiments lead to the study of computer experiments, which are used to investigate many scientific phenomena. A computer experiment consists of a number of runs of the computer code with different input choices. The Design and Analysis of Computer Experiments is a rapidly growing technique in statistical experimental design. This paper aims to discuss some practical issues when designing a computer simulation and/or experiments for manufacturing systems. A case study approach is reviewed and presented.

Regulating the coal industry : striking a balance between commercial and public interests - a Queensland case study

The coal industry in Queensland operates in a very complex regulatory environment with a matrix of Federal and State laws covering the environment, health and safety, taxation and royalties, tenure, and development approvals. The Queensland Government in 2012 recognised the validity of certain industry concerns and passed two Acts being the Environmental Protection (Greentape Reduction) Amendment Act 2012 (the Greentape Act) and the Mines Legislation (Streamlining) Amendment Act 2012 (the Streamlining Act). Other changes are foreshadowed in relation to overlapping tenure and in the development of common resources legislation. Accordingly there is a great level of activity and change that has occurred or which is on the horizon. This article focuses upon these regulatory changes and foreshadows other areas requiring consideration. It commences with a consideration of the changes that have already occurred, examines those regulatory amendments that are on the drawing board and concludes with suggestions as to further interventions and amendments that have the potential to enhance the efficiency and effectiveness of the legislative framework in which coal mining is conducted.