Thermal degradation of a composite solid propellant examined by DSC - Kinetic study

The thermal decomposition of ammonium perchlorate (AP)/hydroxyl-terminated-polybutadiene (HTPB), the AP/HTPB solid propellant, was studied at different heating rates in dynamic nitrogen atmosphere. The exothermic reaction kinetics was studied by differential scanning calorimetry (DSC) in non-isothermal conditions. The Arrhenius Parameters were estimated according to the Ozawa method. The calculated activation energy was 134.5 W mol(-1), the pre-exponential factor, A, was 2.04.10(10) min(-1) and the reaction order for the global composite decomposition was estimated in 0.7 by the kinetic Shimadzu software based on the Ozawa method. The Kissinger method for obtaining the activation energy value was also used for comparison. These results are discussed here.

Morfologia da micrópila e da superfície dos ovócitos de piracanjuba, Brycon orbignyanus (Osteichthyes, Characidae), sob microscopia eletrônica de varredura

This paper studied the morphology of oocytes of Brycon orbignyanus, (Osteichthyes, Characidae), through observation in Scanning Electron Microscopy (SEM). Fragments of the ovaries from adult females were collected. During the reproductive period, a hormonal induction in females was carried out to collect the oocytes after extrusion. The samples were fixed and processed for observation in SEM. Results showed that the oocytes of B. orbignyanus had a follicular epithelium formed by a single layer of cells with compressed shape, covering the whole radiatta zone that showed a smooth and regular surface with innumerable pores. The micropyle had a funnel-shaped, containing several furrows. The oocyte surface around the micropyle presented pores closer of each other than the other surface areas of radiatta zone.

Avaliação da formação do biofilme de Candida albicans sobre superfície de titânio revestida com hidroxiapatita por meio de microscopia eletrônica de varredura

In this study Candida albicans biofilm formation on the surface of commercially pure titanium (cp-Ti) coated with hydroxyapatite was observed by means of scanning electron microscope. The biofilm was formed after 45 days of incubation of the samples in liquid culture medium inoculated with fungus cells in a tube of polystyrene with screw cap and sterilized. After the biofilm removal with 10% EDTA solution was observed pitting on the surface of cp-Ti coated.

Diagnóstico diferencial da fobia social: Uma revisâo

Social phobia is a common mental disorder that can cause considerable distress and impairment in functioning and quality of life but it is still an underdiagnosed and undertreated disorder. The differential diagnosis is not always simple. because its clinical features overlap with many other mental and non-mental disorders characterized by social avoidance. The aim of this study was to review the literature and discuss the differential diagnosis of social phobia with the following conditions. normal social anxiety (shyness), depressive disorders, alcoholism, body dysmorphic disorder, panic disorder and agoraphobia, simple phobias, generalized anxiety disorder, obsessive-compulsive disorder, post-traumatic stress disorder, delusional disorders and avoidant and schizoid personality disorders. A Medline and Lilacs search was conducted between 1990 and 2002, using the key words social phobia, social anxiety disorder, diagnosis and defferential diagnosis. The accurate diagnosis is very important for the appropriate treatment approach.

Efeito da mitomicina c no epitélio ciliar estudo experimental em coelhos com microscopia eletrônica de varredura e de transmissão

Purpose: To evaluate and correlate in the rabbit the possible changes caused by mitomycin C under the scleral flap in the ciliary epithelium with transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Methods: The eyes of 32 albino rabbits were studied and divided in 4 experimental groups. The right eye (RE) was intended for the experimental groups and the left eye (LE) for the controls. Group I (G1) was formed by 8 eyes that received 0,5 mg/ml of mitomycin C under the scleral flap and were examined after 15 days. Group II (G2) differed from G1 only in the time of the exam, after 30 days. Group III (G3) was formed by 8 eyes that received 0,2 mg/ml of mitomycin C under the scleral flap and were examined after 15 days. Group IV (G4) differed from group 3 just in the time of the exam, after 30 days. In each eye the internal ciliary epithelium were examined with TEM. Results: The following changes in the internal ciliary epithelium were observed in groups G2, G3, and G4 with TEM: discontinuous and irregular basement membrane, more irregular and electron-dense nucleous, enlargement among interdigitation, edematous mitochondria and myelin figures. These alterations were not found in all the animals of the groups. Group G 1 did not present alterations. Roughness in groups G 1, G2, G3 and G4 were observed with SEM. In groups G 1 and G2 continuity solutions were also observed. Conclusion: Mitomycin C in 0,2 mg/ml and 0,5 mg/ml concentrations caused changes in the internal ciliary epithelium 15 and 30 days after, with TEM and SEM. There was no correlation between dosage, time and with TEM and SEM.

Protocolo para ensaios físico-químicos de estabilidade de fitocosméticos

The growing demand for stable, safe and effective cosmetics has required increasingly complex studies by the scientific community and the use of more efficient techniques to determine the stability of these products. The use of active principles from the Brazilian flora has led to the development of numerous products, in the most varied pharmaceutical forms, making it, even more difficult to standardize experimental protocols to certify the stability of cosmetic preparations. While in Brazil there is no one protocol that standardizes the tests that should be carried out to determine product stability, several studies have been conducted in academic laboratories to determine the stability of specific raw materials. The rheological properties of topical use products have to be taken into account in their manufacture, storage and application. The determination of the rheological behavior of a formulation helps in evaluating the physicochemical nature of the vehicle, allowing early signs of physical instability to be detected and thus enabling quality control of the constituents, test formulations and final products. Thermal analysis has also been used to assist in the study of cosmetic stability and differential scanning calorimetry to guide the development of new products. Other tools, such as fluorimetry and laser granulometry can be used to help the study and development of both emulsified and non-emulsified systems. The aim of the present study is to develop a protocol for the investigation of the physical and chemical stability of phytocosmetics - systems containing active compounds extracted from the Brazilian biodiversity.

Methodology for DSC calibration in high heating rates

Despite the large use of differential scanning calorimetry (DSC) technique in advanced polymer materials characterization, the new methodology called DSC in high heating rates was developed. The heating rate during conventional DSC experiments varying from 10 to 20°C.min-1, sample mass from 10 to 15mg and standard aluminum sample pan weighting, approximately, 27mg. In order to contribute to a better comprehension of DSC behavior in different heating rates, this work correlates as high heating rate influences to the thermal events in DSC experiments. Samples of metallic standard (In, Pb, Sn and Zn) with masses varying from 0.570mg to 20.9mg were analyzed in multiples sample heating rate from 4 to 324°C. min-1. In order to make properly all those experiments, a precise and careful temperature and enthalpy calibrations were performed and deeply discussed. Thus, this work shows a DSC methodology able to generate good and reliable results on experiments under any researcher choice heating rates to characterize the advanced materials used, for example, for aerospace industry. Also it helps the DSC users to find in their available instruments, already installed, a better and more accurate DSC test results, improving in just one shot the analysis sensitivity and resolution. Polypropylene melting and enthalpy thermal events are also studied using both the conventional DSC method and high heating rate method.

Crecimiento de la población y fecundidad diferencial en América Latina

Incluye Bibliografía

Causas de muerte que han determinado los recientes aumentos en la mortalidad diferencial por sexo en los Estados Unidos

Resumen y comentarios de Raúl Tapia, del artículo publicado en The Milkbank Memorial Fund Quarterly, vol. 39, 1961

Fecundidad diferencial según nivel de instrucción

Incluye Bibliografía

Fecundidad diferencial de Colombia por secciones político-administrativas

Incluye Bibliografía

Fecundidad diferencial en la República del Paraguay según condición de ruralidad y nivel de instrucción de la mujer

Incluye Bibliografía

Fecundidad diferencial para el area metropolitana de San Juan: estado civil, actividad economica y nivel de instruccion; Puerto Rico, 1960

Incluye Bibliografía