A novel approachfor assessing the fatigue strength of ultrasonic impact treated welded structures.

It is commonly observed that complex fabricated structures subject tofatigue loading fail at the welded joints. Some problems can be corrected by proper detail design but fatigue performance can also be improved using post-weld improvement methods. In general, improvement methods can be divided into two main groups: weld geometry modification methods and residual stress modification methods. The former remove weld toe defects and/or reduce the stress concentrationwhile the latter introduce compressive stress fields in the area where fatigue cracks are likely to initiate. Ultrasonic impact treatment (UIT) is a novel post-weld treatment method that influences both the residual stress distribution andimproves the local geometry of the weld. The structural fatigue strength of non-load carrying attachments in the as-welded condition has been experimentally compared to the structural fatigue strength of ultrasonic impact treated welds. Longitudinal attachment specimens made of two thicknesses of steel S355 J0 have been tested for determining the efficiency of ultrasonic impacttreatment. Treated welds were found to have about 50% greater structural fatigue strength, when the slope of the S-N-curve is three. High mean stress fatigue testing based on the Ohta-method decreased the degree of weld improvement only 19%. This indicated that the method could be also applied for large fabricated structures operating under high reactive residual stresses equilibrated within the volume of the structure. The thickness of specimens has no significant effect tothe structural fatigue strength. The fatigue class difference between 5 mm and 8 mm specimen was only 8%. It was hypothesized that the UIT method added a significant crack initiation period to the total fatigue life of the welded joints. Crack initiation life was estimated by a local strain approach. Material parameters were defined using a modified Uniform Material Law developed in Germany. Finite element analysis and X-ray diffraction were used to define, respectively, the stress concentration and mean stress. The theoretical fatigue life was found to have good accuracy comparing to experimental fatigue tests.The predictive behaviour of the local strain approach combined with the uniformmaterial law was excellent for the joint types and conditions studied in this work.

A modified structural stress method for fatigue assessment of welded structures

Fatigue life assessment of weldedstructures is commonly based on the nominal stress method, but more flexible and accurate methods have been introduced. In general, the assessment accuracy is improved as more localized information about the weld is incorporated. The structural hot spot stress method includes the influence of macro geometric effects and structural discontinuities on the design stress but excludes the local features of the weld. In this thesis, the limitations of the structural hot spot stress method are discussed and a modified structural stress method with improved accuracy is developed and verified for selected welded details. The fatigue life of structures in the as-welded state consists mainly of crack growth from pre-existing cracks or defects. Crack growth rate depends on crack geometry and the stress state on the crack face plane. This means that the stress level and shape of the stress distribution in the assumed crack path governs thetotal fatigue life. In many structural details the stress distribution is similar and adequate fatigue life estimates can be obtained just by adjusting the stress level based on a single stress value, i.e., the structural hot spot stress. There are, however, cases for which the structural stress approach is less appropriate because the stress distribution differs significantly from the more common cases. Plate edge attachments and plates on elastic foundations are some examples of structures with this type of stress distribution. The importance of fillet weld size and weld load variation on the stress distribution is another central topic in this thesis. Structural hot spot stress determination is generally based on a procedure that involves extrapolation of plate surface stresses. Other possibilities for determining the structural hot spot stress is to extrapolate stresses through the thickness at the weld toe or to use Dong's method which includes through-thickness extrapolation at some distance from the weld toe. Both of these latter methods are less sensitive to the FE mesh used. Structural stress based on surface extrapolation is sensitive to the extrapolation points selected and to the FE mesh used near these points. Rules for proper meshing, however, are well defined and not difficult to apply. To improve the accuracy of the traditional structural hot spot stress, a multi-linear stress distribution is introduced. The magnitude of the weld toe stress after linearization is dependent on the weld size, weld load and plate thickness. Simple equations have been derived by comparing assessment results based on the local linear stress distribution and LEFM based calculations. The proposed method is called the modified structural stress method (MSHS) since the structural hot spot stress (SHS) value is corrected using information on weld size andweld load. The correction procedure is verified using fatigue test results found in the literature. Also, a test case was conducted comparing the proposed method with other local fatigue assessment methods.

Effect of Mechanical and Geometric Mismatching on Fatigue and Damage of Welded Joints

The future of high technology welded constructions will be characterised by higher strength materials and improved weld quality with respect to fatigue resistance. The expected implementation of high quality high strength steel welds will require that more attention be given to the issues of crack initiation and mechanical mismatching. Experiments and finite element analyses were performed within the framework of continuum damage mechanics to investigate the effect of mismatching of welded joints on void nucleation and coalescence during monotonic loading. It was found that the damage of undermatched joints mainly occurred in the sandwich layer and the damageresistance of the joints decreases with the decrease of the sandwich layer width. The damage of over-matched joints mainly occurred in the base metal adjacent to the sandwich layer and the damage resistance of the joints increases with thedecrease of the sandwich layer width. The mechanisms of the initiation of the micro voids/cracks were found to be cracking of the inclusions or the embrittled second phase, and the debonding of the inclusions from the matrix. Experimental fatigue crack growth rate testing showed that the fatigue life of under-matched central crack panel specimens is longer than that of over-matched and even-matched specimens. Further investigation by the elastic-plastic finite element analysis indicated that fatigue crack closure, which originated from the inhomogeneousyielding adjacent to the crack tip, played an important role in the fatigue crack propagation. The applicability of the J integral concept to the mismatched specimens with crack extension under cyclic loading was assessed. The concept of fatigue class used by the International Institute of Welding was introduced in the parametric numerical analysis of several welded joints. The effect of weld geometry and load condition on fatigue strength of ferrite-pearlite steel joints was systematically evaluated based on linear elastic fracture mechanics. Joint types included lap joints, angle joints and butt joints. Various combinations of the tensile and bending loads were considered during the evaluation with the emphasis focused on the existence of both root and toe cracks. For a lap joint with asmall lack-of-penetration, a reasonably large weld leg and smaller flank angle were recommended for engineering practice in order to achieve higher fatigue strength. It was found that the fatigue strength of the angle joint depended strongly on the location and orientation of the preexisting crack-like welding defects, even if the joint was welded with full penetration. It is commonly believed that the double sided butt welds can have significantly higher fatigue strength than that of a single sided welds, but fatigue crack initiation and propagation can originate from the weld root if the welding procedure results in a partial penetration. It is clearly shown that the fatigue strength of the butt joint could be improved remarkably by ensuring full penetration. Nevertheless, increasing the fatigue strength of a butt joint by increasing the size of the weld is an uneconomical alternative.

Avances en el estudio del "torrao" o cribado del tomate

El "torrao" es una enfermedad presente en nuestro país desde 2001, que sigue presentándose en cada campaña de tomate con mayor o menor incidencia según el año. Las plantas afectadas muestran necrosis en la parte basal de los foliolos que puede evolucionar a cribado, manchas longitudinales en los peciolos y manchas necróticas en fruto, que terminan por rajarlo. El presente trabajo es la continuación del publicado en el número 32 de esta revista titulado "Necrosis del tomate: "torrao" o cribado" y surge de los resultados obtenidos tras la reciente publicación de la identificación y caracterización del nuevo virus "Tomato torrado virus" (ToTV) como agente implicado en la enfermedad conocida como "torrao". En este estudio se seleccionaron 94 muestras procedentes de prospecciones realizadas en invernaderos de Murcia durante los años 2003 a 2006. La aplicación RT-PCR e hibridación molecular para la detección de ToTV ha permitido detectar la presencia de esta nueva virosis en 87 de las muestras analizadas. En 83 de ellas, se encontró la presencia conjunta de este nuevo virus con el Pepino mosaic virus (PepMV), mayoritariamente con el aislado tipo Chileno 2 (Accesión number: DQ00095). Se plantean nuevos estudios para determinar la implicación de ambos virus, ToTV y PepMV, en el desarrollo del síndrome conocido como "torrao" del tomate.

Necrosis del tomate: "torrao "o "cribado"

Desde la primavera de 2001, viene presentándose en España una nueva enfermedad conocida con el nombre de "torrao" o "cribado". Los síntomas que habitualmente presentan las plantas afectadas son una necrosis en la parte basal del foliolo que evoluciona a cribado, en los peciolos aparecen manchas longitudinales en ocasiones endurecidas que llegan a curvar los foliolos, y los frutos manifiestan manchas necróticas, deformaciones que finalmente lo rajan, quedando comercialmente inviables. Muestreos realizados desde su aparición han determinado la mayor incidencia de la enfermedad en la zona de Murcia, seguido de Canarias y en menor proporción Almería, y Alicante. Los resultados de los análisis realizados a las 369 muestras recogidas determinan que el 67% de las muestras analizadas eran positivas a Pepino mosaic virus (PepMV). En los ensayos de transmisión, únicamente mediante el injerto, se consiguió reproducir los síntomas de la enfermedad en dos casos, en el resto las plantas inoculadas e injertadas únicamente mostraban síntomas típicos de PepMV y los análisis realizados confirmaron este aspecto. A la vista de los resultados obtenidos, se diseñó un nuevo método de diagnóstico que ha permitido la caracterización del 89% de las muestras analizadas como aislado Chileno 2 de PepMV, recientemente publicado en el Gen Bank (Accesión number: DQ000985). De acuerdo con lo expuesto podría tratarse de uno de los agentes implicados en el desarrollo del síndrome junto con otros factores aún por determinar

Cannabis use and other illicit drug use: Do subjective experiences during first cannabis use increase the probability of using illicit drug use?

Background and aims: Few studies have examined whether subjective experiences during first cannabis use are related to other illicit drug (OID) use. This study investigated this topic. Methods: Baseline data from a representative sample of young Swiss men was obtained from an ongoing Cohort Study on Substance Use Risk Factors (N ¼ 5753). Logistic regressions were performed to examine the relationships between cannabis use and of subjective experiences during first cannabis use with 15 OID. Results: Positive experiences increased the likelihood of using hallucinogens (hallucinogens, salvia divinorum, spice; p50.015), stimulants (speed, ecstasy, cocaine, amphetamines/methamphetamines; p50.006) and also poppers, research chemicals, GHB/GBL, and crystal meth (p50.049). Sniffed drugs (poppers, solvents for sniffing) and ''hard'' drugs (heroin, ketamine, research chemicals, GHB/GBL and crystal meth) were more likely to be used by participants who experienced negative feelings on first use of cannabis (p50.034). Conclusion: Subjective feelings seemed to amplify the association of cannabis with OID. The risk increased for drugs with effects resembling feelings experienced on first cannabis use. Negative experiences should also be a concern, as they were associated with increased risk of using the ''hardest'' illicit drugs.

Analytical Study on the Influence of Geometrical Parameters on the Fatigue Strength of Welds with Undercuts

The purpose of this study is to analyze the influence of geometric parameters on the fatigue strength of the welded joint. The thesis includes the analytical study pertaining to variation of undercut and the weld toe radius. The theoretical part includes the concepts of fracture mechanics, different stages of the crack propagation and finally the results. The numerical results are obtained from FRANC2D/L. The results show that the fatigue strength of the welded structure depends on the parameters of the welds such as the weld toe radius, weld angle, height of the undercut and plate thickness. The results show that the fatigue life can be improved by having the undercut as minimum as possible. However there has been significant variation on the fatigue life of the structure when the weld toe radius is increased.

Kylmämuovatun putkipalkin väsyminen metsätyökoneen puomirakenteessa

Työssä on tutkittu kylmämuovatun suorakaideputkipalkin väsymistä metsätyökoneen puomirakenteen osana. Kylmämuovatun putkipalkin sisäpintaan syntyy käytössä puristavan ulkoisen kuormituksen vaikutuksesta putkipalkin pituussuunnassa sekä seinämän läpi kasvavia säröjä. Työn tarkoituksena on ollut selvittää rakenteen väsymiskestoikä sekä säröytymisen aiheuttavat tekijät. Työssä on verrattu kestoikälaskentaan ja särönkasvuun sovellettujen murtumismekaniikan ja elementtimenetelmän tuloksia laboratoriokokeista saatuihin tuloksiin. Toisiaan tukevien tulosten perusteella kylmämuovausprosessissa syntyneiden jäännösjännitysten osuus särön ydintymisessä, kasvussa ja sen käyttäytymisessä on ulkoisen kuorman paikallisen vaikutuksen lisänä erittäin merkittävä. Putkipalkin väsyminen onkin jäännösjännityksistä riippuva särönkasvuilmiö.

Mephedrone pharmacokinetics after intravenous and oral administration in rats: relation to pharmacodynamics

Rationale Mephedrone (4-methylmethcathinone) is a still poorly known drug of abuse, alternative to ecstasy or cocaine. Objective The major aims were to investigate the pharmacokineticsa and locomotor activity of mephedrone in rats and provide a pharmacokinetic/pharmacodynamic model. Methods Mephedrone was administered to male Sprague-Dawley rats intravenously (10 mg/kg) and orally (30 and 60 mg/kg). Plasma concentrations and metabolites were characterized using LC/MS and LC-MS/MS fragmentation patterns. Locomotor activity was monitored for 180-240 min. Results Mephedrone plasma concentrations after i.v. administration fit a two-compartment model (α=10.23 h−1, β=1.86 h−1). After oral administration, peak mephedrone concentrations were achieved between 0.5 and 1 h and declined to undetectable levels at 9 h. The absolute bioavailability of mephedrone was about 10 % and the percentage of mephedrone protein binding was 21.59±3.67%. We have identified five phase I metabolites in rat blood after oral administration. The relationship between brain levels and free plasma concentration was 1.85±0.08. Mephedrone induced a dose-dependent increase in locomotor activity, which lasted up to 2 h. The pharmacokinetic-pharmacodynamic model successfully describes the relationship between mephedrone plasma concentrations and its psychostimulant effect. Conclusions We suggest a very important first-pass effect for mephedrone after oral administration and an easy access to the central nervous system. The model described might be useful in the estimation and prediction of the onset, magnitude,and time course of mephedrone pharmacodynamics as well as to design new animal models of mephedrone addiction and toxicity.

Juotosmurtumat lyijyttömässä aaltojuotoksessa

Elektroniikkatuotannossa käytettävien lyijyä sisältävien materiaalien korvaaminen lyijyttömillä vaihtoehdoilla ei ole niin yksinkertaista, miltä se kuulostaa. Vaikka suuri osa materiaaleista muuttuukin, niin muutoksilla ei saa olla negatiivisia vaikutuksia tuotteiden luotettavuuteen. Diplomityössä tutkittiin lyijyttömillä juotteilla esiintyviä juotosmurtumia. Tavoitteena oli saada selville juotosmurtumia aiheuttavia ominaisuuksia materiaaleissa sekä selvittää aaltojuotoksen prosessiparametrien vaikutus murtumien syntymiseen. Tässä työssä tarkasteltiin alieutektisella tina-hopea-kupari (Sn/3.0Ag/0.5Cu)-juotteella varustetulla aaltojuotoslaitteistolla juotettuja testisarjoja. Juotoslaatua verrattiin eutektisella tina-kupari-nikkeli (SN100C)-juotteella juotettuihin piirilevyihin. Tutkimusta varten suunniteltiin testipiirilevy, jossa käytettiin ainoastaan lyijyttömiä komponentteja. Tutkimuksessa käytettiin kahta eri laminaattimateriaalia sekä kahta eri johdinpinnoitetta. Testilevyjä rasitettiin satunnaistärinätestillä sekä sääkaapissa lämpötilasyklillä. Juotosliitosten laatua ja luotettavuutta tutkittiin valo-, röntgen- ja elektronimikroskoopin avulla.

Väsymisen huomiointi laitteen ohjauksessa

Työssä selvitettiin väsymisen huomioivan ja minimoivan laitteen ohjausmenetelmiä. Väsymisilmiön huomioiva älykäs laite monitoroi itsenäisesti mm. väsymissäröjen kasvua ja muuttaa toimintaansa sen mukaisesti. Reagoinnin hyötyinä saavutetaan väsyttävästi kuormitetulle laitteelle mm. pidempi käyttöikä ja riskin hallinta, jossa laite tietää, miten sitä voidaan käyttää ennen vauriota ja sen jälkeen. Kunnossapitoon liittyen ennustetaan jäljellä olevaa käyttöikää, jolloin voidaan suunnitella huolto. Tutkimuksessa käsiteltiin mm. laitteiden ohjauksen tarvitsemia mittausmenetelmiä, mittaustiedon käsittelyä, vaurion luokittelua ja vauriota minimoivan ohjauksen rakennetta. Lisäksi käsiteltiin lyhyesti vaurion luokittelussa sekä ohjausreaktioiden ratkaisemisessa tarvittavia oppivia menetelmiä. Väsymistä minimoivan laitteen ohjauksen perusedellytys on laitteen kokemien rasitusten ja/tai suorituksen mittaaminen. Mittaustulosten perusteella määritetään vaurioitumista kuvaavat suureet. Ohjauksen vaurioon reagoivassa osassa määritetään tieto vaurioitumisen kriittisyydestä ja tämän perusteella tarvittava ohjauksen optimaalinen muutos sekä optimaalinen ohjaussignaali tai muu korjaava toimenpide. Ohjaus optimoidaan vaurioitumisnopeus minimoiden ja suorituskyky maksimoiden. Näiden välille etsitään sopiva tasapaino, jossa suorituskyvyn häviö on pieni mahdollisimman suurella vaurioitumisen pienenemisellä. Tämän jälkeen mittauksien avulla saadaan tieto korjatun ohjauksen vaikutuksesta vauriosuureisiin.

Päällystettyä hienopaperia valmistavan tuotantolinjan tuotannon tehokkuuden kehittäminen

Diplomityön tavoitteena on selvittää paperivioista aiheutuvien katkojen syyt paperikoneella ja pyrkiä löytämään ratkaisu ongelmiin erilaisia vianilmaisujärjestelmiä apuna käyttäen. Työssä analysoidaan laatuhylyn synty tuotantolinjan eri kohteissa. Lisäksi tilastoidaan häiriöseisokkisyyt ja sitä kautta pyritään painottamaan kunnossa-pidon tärkeyttä tuotantolinjan tehokkuudessa. Kirjallisuusosassa tutustutaan hyötysuhteen määritelmään ja käsitellään tuotantolinjan hyötysuhteeseen vaikuttavia tekijöitä. Kirjallisuusosassa selvitetään päällystetyn hienopaperin tuoteanalyysin avulla ominaisuudet, joilla on vaikutusta ajettavuuteen ja katkoherkkyyteen on-line päällystävällä hienopaperikoneella. Kokeellisessa osassa selvitetään tuotantoaikaa vähentävien tekijöiden syyt ja mahdolli-set aiheuttajat erilaisten vikaprofiilien avulla. Kokeellisessa osassa analysoidaan myös tuotantolinjan hylyn syntyyn vaikuttavat tekijät ja pyritään minimoimaan hylyn määrä. Pohjapaperin täplät aiheuttivat reikäkatkoja ja hylyn syntymistä kalanterin aukaisujen takia. Reunaviat ja kireysheitot aiheuttivat myös runsaasti katkoja. Lukuisat häiriöseisokit aiheuttivat aikahävikkiä. Häiriöseisokkeja aiheuttivat viat mekaanisissa laitteissa, narujen vaihdot ja rullausruuhkat. Telasuojelun aiheuttamat kalanterin aukaisut olivat työn alussa suurin paperin hylkäyssyy. Telasuojelun optimoinnin ja pohjapaperin täplien määrän vähenemisen myötä telasuojeluaukaisut vähenivät. Lajinvaihdot ja katkot olivat suurimmat hylyn aiheuttajat työn loppuaikana.

Fusion weld metal solidification:Continuum from weld interface to centerline

We present a brief résumé of the history of solidification research and key factors affecting the solidification of fusion welds. There is a general agreement of the basic solidification theory, albeit differing - even confusing - nomenclatures do exist, and Cases 2 and 3 (the Chalmers' basic boundary conditions for solidification, categorized by Savage as Cases) are variably emphasized. Model Frame, a tool helping to model the continuum of fusion weld solidification from start to end, is proposed. It incorporates the general solidification models, of which the pertinent ones are selected for the actual modeling. The basic models are the main solidification Cases 1…4. These discrete Cases are joined with Sub-Cases: models of Pfann, Flemings and others, bringing needed Sub-Case variables into the model. Model Frame depicts a grain growing from the weld interface to its centerline. Besides modeling, the Model Frame supports education and academic debate. The new mathematical modeling techniques will extend its use into multi-dimensional modeling, introducing new variables and increasing the modeling accuracy. We propose a model: melting/solidification-model (M/S-model) - predicting the solute profile at the start of the solidification of a fusion weld. This Case 3-based Sub-Case takes into account the melting stage, the solute back-diffusion in the solid, and the growth rate acceleration typical to fusion welds. We propose - based on works of Rutter & Chalmers, David & Vitek and our experimental results on copper - that NEGS-EGS-transition is not associated only with cellular-dendritic-transition. Solidification is studied experimentally on pure and doped copper with welding speed range from 0 to 200 cm/min, with one test at 3000 cm/min. Found were only planar and cellular structures, no dendrites - columnar or equiaxed. Cell sub structures: rows of cubic elements we call "cubelettes", "cell-bands" and "micro-cells", as well as an anomalous crack morphology "crack-eye", were detected, as well as microscopic hot crack nucleus we call "grain-lag cracks", caused by a grain slightly lagging behind its neighbors in arrival to the weld centerline. Varestraint test and R-test revealed a change of crack morphologies from centerline cracks to grainand cell boundary cracks with an increasing welding speed. High speed made the cracks invisible to bare eye and hardly detectable with light microscope, while electron microscope often revealed networks of fine micro-cracks.

The Swiss cohort study on substance use risk factors : findings of two waves

Aim: To summarize published findings in peer-reviewed journals of the first two waves of the Swiss Cohort Study on Substance Use Risk Factors (C-SURF), a longitudinal study assessing risk and protective factors of 5,987 young men during the phase of emerging adulthood (20 years at baseline, followed-up 15 months later). Methods: Included were 33 studies published until November 2014 focusing on substance use. Results: Substance use in early adulthood is a prevalent and stable behavior. The 12-month prevalence of nonmedical use of prescription drugs (10.6%) lies between that of cannabis (36.4%) and other illicit drugs such as ecstasy (3.7%) and cocaine (3.2%). Although peer pressure in the form of misconduct is associated with increased substance use, other aspects such as peer involvement in social activities may have beneficial effects. Regular sport activities are associated with reduced substance use, with the exception of alcohol use. Young men are susceptible to structural conditions such as the price of alcohol beverages or the density of on-premise alcohol outlets. Particularly alcohol use in public settings such as bars, discos or in parks (compared with private settings such as the home) is associated with alcohol-related harm, including injuries or violence. Being a single parent versus nuclear family has no effect on alcohol use, but active parenting does. Besides parenting, religiousness is an important protective factor for both legal and illegal substance use. Merely informing young men about the risks of substance use may not be an effective preventive measure. At-risk users of licit and illicit substances are more health literate, e. g., for example, they seek out more information on the internet than non-at-risk-users or abstainers. Discussion: There are a number of risk and protective substance use factors, but their associations with substance use do not necessarily agree with those found outside Europe. In the United States, for example, heavy alcohol use in this age group commonly takes place in private settings, whereas in Switzerland it more often takes place in public settings. Other behaviors, such as the nonmedical use of prescription drugs, appear to be similar to those found overseas, which may show the need for targeted preventive actions. C-SURF findings point to the necessity of establishing European studies to identify factors for designing specific preventive actions.

Repeated doses of methylone, a new drug of abuse, induce changes in serotonin and dopamine systems in the mouse

Rationale Methylone, a new drug of abuse sold as"bath salts' has similar effects to ecstasy or cocaine. Objective We have investigated changes in dopaminergic and serotoninergic markers, indicative of neuronal damage, induced by methylone in the frontal cortex, hippocampus and striatum of mice and according two different treatment schedules. Methods Methylone was given subcutaneously to male Swiss CD1 mice and at an ambient temperature of 26ºC. Treatment A: three doses of 25 mg/Kg at 3.5 h interval between doses for two consecutive days. Treatment B: four doses of 25 mg/Kg at 3 h interval in one day. Results Repeated methylone administration induced hyperthermia and a significant loss in body weight. Following treatment A, methylone induced transient dopaminergic (frontal cortex) and serotoninergic (hippocampus) impairment. Following treatment B, transient dopaminergic (frontal cortex) and serotonergic (frontal cortex and hippocampus) changes 7 days after treatment were found. We found evidence of astrogliosis in the CA1 and the dentate gyrus of the hippocampus following treatment B. The animals also showed an increase in immobility time in the forced swim test, pointing to a depressive-like behavior. In cultured cortical neurons, methylone (for 24 and 48 h) did not induce a remarkable cytotoxic effect. Conclusions The neural effects of methylone differ depending upon the treatment schedule. Neurochemical changes elicited by methylone are apparent when administered at an elevated ambient temperature, four times per day at 3 h intervals, which is in accordance with its short half-life.