From Shadow to Green: Linking Environmental Fiscal Reforms and the Informal Economy

47 p.

The Green Paradox and Learning-by-doing in the Renewable Energy Sector

21 p.

Climate change and its risk reduction by mangrove ecosystem of Bangladesh

Climate change is amongst the most dreaded problems of the new millennium. Bangladesh is a coastal country bounded by Bay of Bengal on its southern part and here natural disasters are an ongoing part of human life. This paper discusses about the possible impact of climate change through tropical cyclones, storm surges, coastal erosion and sea level rise in the coastal community of Bangladesh and how they cope with these extreme events by the help of mangrove ecosystem. Both qualitative and quantitative discussions are made by collected data from different research work those are conducted in Bangladesh. Mangrove ecosystem provides both goods and services for coastal community, helps to improve livelihood options and protect them from natural disaster by providing variety of environmental support

Development of Metalloenzyme Dioxygen Reduction Cathodes

The prime thrust of this dissertation is to advance the development of fuel cell dioxygen reduction cathodes that employ some variant of multicopper oxidase enzymes as the catalyst. The low earth-abundance of platinum metal and its correspondingly high market cost has prompted a general search amongst chemists and materials scientists for reasonable alternatives to this metal for facilitating catalytic dioxygen reduction chemistry. The multicopper oxidases (MCOs), which constitute a class of enzyme that naturally catalyze the reaction O₂ + 4H⁺ + 4e^- → 2H₂O, provide a promising set of biochemical contenders for fuel cell cathode catalysts. In MCOs, a substrate reduces a copper atom at the type 1 site, where charge is then transferred to a trinuclear copper cluster consisting of a mononuclear type 2 or “normal copper” site and a binuclear type 3 copper site. Following the reduction of all four copper atoms in the enzyme, dioxygen is then reduced to water in two two-electron steps, upon binding to the trinuclear copper cluster. We identified an MCO, a laccase from the hyperthermophilic bacterium Thermus thermophilus strain HB27, as a promising candidate for cathodic fuel cell catalysis. This protein demonstrates resilience at high temperatures, exhibiting no denaturing transition at temperatures high as 95°C, conditions relevant to typical polymer electrolyte fuel cell operation.

In Chapter I of this thesis, we discuss initial efforts to physically characterize the enzyme when operating as a heterogeneous cathode catalyst. Following this, in Chapter II we then outline the development of a model capable of describing the observed electrochemical behavior of this enzyme when operating on porous carbon electrodes. Developing a rigorous mathematical framework with which to describe this system had the potential to improve our understanding of MCO electrokinetics, while also providing a level of predictive power that might guide any future efforts to fabricate MCO cathodes with optimized electrochemical performance. In Chapter III we detail efforts to reduce electrode overpotentials through site-directed mutagenesis of the inner and outer-sphere ligands of the Cu sites in laccase, using electrochemical methods and electronic spectroscopy to try and understand the resultant behavior of our mutant constructs. Finally, in Chapter IV, we examine future work concerning the fabrication of enhanced MCO cathodes, exploring the possibility of new cathode materials and advanced enzyme deposition techniques.

Physiology of nitrate reduction in Pseudomonas aeruginosa. [Translation from: Z.allg.Mikrobiol. 13, 83-94, 1973.]

Pseudomonas aeruginosa has for some time been known as a denitrifier. Pseudomonas aeruginosa was chosen for further studies, because P. aeruginosa occurs abundantly in Plusssee and moreover there are contradictory assertions on the gas products of denitrification by this bacteria. In experimental research the pattern of growth and gas production of Pseudomonas aeruginosa on nutrient broth was studied.

For the determination of iron (II) and total iron with 2,2'-dipyridyl in mineral waters. Reduction of iron (III) with ascorbic acid [Translation from: Zeitschrift fur Analytische Chemie 209 340-341, 1965]

The determination of bi- and trivalent iron in proximity, in mineral waters has gained in significance, on biological and technical grounds. This short paper describes the procedure of the determination of bivalent iron and total iron in a water sample.

Local thermal fixing of a photorefractive LiNbO3 hologram by use of a CO2 laser

A real-time, in situ fixing method by use of heating with a CO2 laser beam is suggested for thermal fixing of a small local hologram in the bulk of a Fe:LiNbO3 photorefractive crystal. For heating up to 100 degrees C-200 degrees C a volume with a shape similar to that of the laser beam a heat-guiding technique is developed. On the basis of the heat-transfer equations, different heating modes with or without metal absorbers for heat guiding-obtained by use of a continuous or pulsed laser beam are analyzed. The optimal mode may be pulsed heating with absorbers. On this basis experiments have been designed and demonstrated. It is seen that the fixing process with CO2 laser beam is short compared with the process by use of an oven, and the fixing efficiency is quite high. (C) 1998 Optical Society of America.

Electrocatalytic reduction of dioxygen at chemically modified electrodes

The kinetics of the reduction of O₂ by Ru(NH₃)₆⁺² as catalyzed by cobalt(II) tetrakis(4-N-methylpyridyl)porphyrin are described both in homogeneous solution and when the reactants are confined to Nafion coatings on graphite electrodes. The catalytic mechanism is determined and the factors that can control the total reduction currents at Nafion-coated electrodes are specified. A kinetic zone diagram for analyzing the behavior of catalyst-mediator-substrate systems at polymer coated electrodes is presented and utilized in identifying the current-limiting processes. Good agreement is demonstrated between calculated and measured reduction currents at rotating disk electrodes. The experimental conditions that will yield the optimum performance of coated electrodes are discussed, and a relationship is derived for the optimal coating thickness.

The relation between the reduction potentials of adsorbed and unadsorbed cobalt(III) tetrakis(4-N-methylpyridyl)porphyrin and those where it catalyzes the electroreduction of dioxygen is described. There is an unusually large change in the formal potential of the Co(III) couple upon the adsorption of the porphyrin on the graphite electrode surface. The mechanism in which the (inevitably) adsorbed porphyrin catalyzes the reduction of O₂ is in accord with a general mechanistic scheme proposed for most monomeric cobalt porphyrins.

Four new dimeric metalloporphyrins (prepared in the laboratory of Professor C. K. Chang) have the two porphyrin rings linked by an anthracene bridge attached to meso positions. The electrocatalytic behavior of the diporphyrins towards the reduction of O₂ at graphite electrodes has been examined for the following combination of metal centers: Co-Cu, Co-Fe, Fe-Fe, Fe-H₂. The Co-Cu diporphyrin catalyzes the reduction of O₂ to H₂O₂ but no further. The other three catalysts all exhibit mixed reduction pathways leading to both H₂O₂ and H₂O. However, the pathways that lead to H₂O do not involve H₂O₂ as an intermediate. A possible mechanistic scheme is offered to account for the observed behavior.

Avaliação técnico-econômica da implementação de um sistema de cultivo de microalgas na usina termelétrica Barbosa Lima Sobrinho com vista à biofixação de CO2

Este estudo teve como finalidade levantar dados para uma avaliação das alternativas tecnológicas (cultivos de microalgas e reflorestamento) para a biofixação de CO2 da atmosfera próxima à usina termelétrica; tendo sido utilizada como referência a Usina Barbosa Lima Sobrinho. Já existe um projeto de avaliação do efeito do reflorestamento na fixação do CO2 nesta usina e, neste trabalho, foi avaliada a alternativa do cultivo de microalgas. Uma pesquisa inicial foi feita na literatura para verificar qual a espécie de microalga seria a mais adequada para ser utilizada no estudo, tendo sido a espécie Chlorella sp. a selecionada. Posteriormente os sistemas de cultivo de microalgas mais comumente empregados no mercado foram levantados e foi selecionado o cultivo em tanques abertos como referência para a modelagem do processo. Utilizando os dados da termelétrica e da literatura foi possível estimar a quantidade de CO2 que será retirada da atmosfera caso um sistema de cultivo seja efetivamente instalado na usina termelétrica. Uma análise econômica foi realizada para determinar a viabilidade do projeto. Os resultados indicam que a utilização deste tipo de tecnologia é promissora

Estudo teórico da redução fotocatalítica do gás carbônico a metanol utilizando dióxido de titânio

O aumento da concentração de gases de efeito estufa (GEE) de fontes antropogênicas tem sido visto como uma das principais contribuições para o aquecimento global, ameaçando a vida no planeta. O dióxido de carbono (CO2) é um dos principais GEE e suas fontes geradoras estão relacionadas a processos essenciais à sociedade, como a produção de energia, produtos diversos e transporte. A conversão do CO2 parece ser uma alternativa promissora para reduzir a emissão deste gás na atmosfera. De particular interesse para este estudo, a fotorredução do CO2 a metanol pode contribuir para mitigar o problema dos GEE, gerando um importante insumo da indústria química. Assim, este estudo tem por objetivo utilizar cálculos quanto-mecânicos, como a Teoria do Funcional Densidade, para investigar um caminho para a reação de redução do CO2. A reação de redução do CO2 à ácido fórmico, formaldeído e metanol foi estudada sem a interação com o catalisador e na presença de dióxido de titânio como catalisador. Foi realizada uma comparação de cálculos em diferentes níveis teóricos e diferentes bases, com dados experimentais. Para os cálculos envolvendo o TiO2, foi utilizado o nível B3LYP/6-31G(d,p). Frequências vibracionais também foram calculadas para cada etapa, permitindo a identificação de possíveis estados de transição e estimativa de barreiras de reação (energia potencial). Cálculos de coordenada intrínseca de reação (IRC) foram empregados para confirmar que os estados de transição encontrados, estão relacionados a cada etapa estudada. A comparação da redução do dióxido de carbono a ácido fórmico, com e sem catalisador, mostrou que a presença do dióxido de titânio reduziu em mais de 25,0% a barreira reacional desta etapa