Myosin Va is developmentally regulated and expressed in the human cerebellum from birth to old age

Myosin Va functions as a processive, actin-based motor molecule highly enriched in the nervous system, which transports and/or tethers organelles, vesicles, and mRNA and protein translation machinery. Mutation of myosin Va leads to Griscelli disease that is associated with severe neurological deficits and a short life span. Despite playing a critical role in development, the expression of myosin Va in the central nervous system throughout the human life span has not been reported. To address this issue, the cerebellar expression of myosin Va from newborns to elderly humans was studied by immunohistochemistry using an affinity-purified anti-myosin Va antibody. Myosin Va was expressed at all ages from the 10th postnatal day to the 98th year of life, in molecular, Purkinje and granular cerebellar layers. Cerebellar myosin Va expression did not differ essentially in localization or intensity from childhood to old age, except during the postnatal developmental period. Structures resembling granules and climbing fibers in Purkinje cells were deeply stained. In dentate neurons, long processes were deeply stained by anti-myosin Va, as were punctate nuclear structures. During the first postnatal year, myosin Va was differentially expressed in the external granular layer (EGL). In the EGL, proliferating prospective granule cells were not stained by anti-myosin Va antibody. In contrast, premigratory granule cells in the EGL stained moderately. Granule cells exhibiting a migratory profile in the molecular layer were also moderately stained. In conclusion, neuronal myosin Va is developmentally regulated, and appears to be required for cerebellar function from early postnatal life to senescence.

Effects of melatonin on DNA damage induced by cyclophosphamide in rats

The antioxidant and free radical scavenger properties of melatonin have been well described in the literature. In this study, our objective was to determine the protective effect of the pineal gland hormone against the DNA damage induced by cyclophosphamide (CP), an anti-tumor agent that is widely applied in clinical practice. DNA damage was induced in rats by a single intraperitoneal injection of CP (20 or 50 mg/kg). Animals received melatonin during the dark period for 15 days (1 mg/kg in the drinking water). Rat bone marrow cells were used for the determination of chromosomal aberrations and of formamidopyrimidine DNA glycosylase enzyme (Fpg)-sensitive sites by the comet technique and ofXpf mRNA expression by qRT-PCR. The number (mean ± SE) of chromosomal aberrations in pinealectomized (PINX) animals treated with melatonin and CP (2.50 ± 0.50/100 cells) was lower than that obtained for PINX animals injected with CP (12 ± 1.8/100 cells), thus showing a reduction of 85.8% in the number of chromosomal aberrations. This melatonin-mediated protection was also observed when oxidative lesions were analyzed by the Fpg-sensitive assay, both 24 and 48 h after CP administration. The expression of Xpf mRNA, which is involved in the DNA nucleotide excision repair machinery, was up-regulated by melatonin. The results indicate that melatonin is able to protect bone marrow cells by completely blocking CP-induced chromosome aberrations. Therefore, melatonin administration could be an alternative and effective treatment during chemotherapy.

Vibration analysis of a power take-off line

Gear rattle is a phenomenon that occurs when idling or lightly loaded gears collide due to engine’s torque fluctuations. This behaviour is related to vibration behaviour of the transmission system. Aim of this master’s thesis is to evaluate Adams and Adams/Machinery as a simulation tools for modelling the rattle e ect in a transmission system. A case study of tractor’s power take-o driveline, suspected to be prone to rattle, is performed in this work. Modelling methods used by Adams in this type of study are presented in the theory section while simulation model build with the software during this work is presented in the results. The Machinery toolbox is used to create gears and bearings while other model components are created with standard Adams tool set. Geometries and excitations are exported from other softwares. Results were obtained from multiple variations of a base model. These result sets and literature review suggest that Adams/Machinery may not be the most suitable tool for rattle analysis. While the system behaviour was partially captured, for accurate modelling user-written routines must be used which may be more easily performed with other tools. Further research about this topic is required.

Tuottavuuden ja investointitehokkuuden parantaminen kunnallisteknisissä töissä

Tutkimuksen tavoitteena oli selvittää keinoja parantaa tuottavuutta ja investointitehokkuutta kunnallisteknisissä töissä. Tutkimusmenetelmäksi valittiin konstruktiivinen tutkimusmenetelmä, jossa käytännölliseen ongelmaan luodaan teoriapohjan kautta ratkaisuehdotus. Työn teoriaosuus käsittelee palveluiden tuottavuutta ja sen mittaamista. Työn tuloksena syntyi excel-työkalu, jonka avulla on mahdollista tarkastella palveluntuottajan konekannan aiheuttamia kustannuksia ja tuottoja. Työkalu laskee konekohtaiset kustannukset ja tuotot, joiden avulla palveluntuottajalle on mahdollista osoittaa aiempien investointien kannattavuus. Työkalu laskee kustannus- ja tuottoarvion myös vaihtoehtoiselle konekannalle, jossa alhaisen käyttöasteen koneita korvataan monipuolisemmalla kalustolla. Palveluntuottajan konekannan hallinta ja kustannusrakenteen tarkka määrittely ovat tärkeässä roolissa tuottavuuden ja kannattavuuden kehittämisessä. Työkalu mahdollistaa myös eri kustannuserissä tapahtuvien muutosten vaikutusten arvioinnin, mikä auttaa palveluntuottajia toiminnan pitkäjänteisessä kehittämisessä.

Yrityskohtainen ilmansuojelulaitteiden vaatimustenmukaisuuden arviointi SFS-EN 1090-1 periaatteiden mukaisesti

Rakennustuotteena käytettävien teräskokoonpanojen lisääntyneet CE- merkintävaatimukset ovat aiheuttaneet runsaasti hämmennystä alan toimijoiden keskuudessa. Tämän tutkimuksen tavoitteena oli selvittää teräskokoonpanojen SFS-EN 1090-1 standardin soveltamisala suhteessa konedirektiiviin sekä kartoittaa mahdollisen muutoksen aiheuttamat toimenpiteet ilmansuojelulaitetoimituksissa. Työssä tutustuttiin asetusten teoreettiseen viitekehykseen, standardeihin sekä alan kirjallisuuteen. Teoriaa sovellettiin tulevaisuudentutkimuksen Delfoi- menetelmään, jossa asiantuntijahaastatteluiden perusteella arvioitiin asetuksen soveltamisalaa ja vaatimuksia. Tutkimuksen avaintuloksia ovat standardin SFS-EN 1090-1 vaatimuksenmukaisuuteen vaikuttavien tekijöiden tunnistaminen ja niiden perusteella laaditut ehdotukset yritystoiminnan kehittämiseksi.

Press forming of paperboard – advancement of converting tools and process control

Press forming is nowadays one of the most common industrial methods in use for producing deeper trays from paperboard. Demands for material properties like recyclability and sustainability have increased also in the packaging industry, but there are still limitations related to the formability of paperboard. A majority of recent studies have focused on material development, but the potential of the package manufacturing process can also be improved by the development of tooling and process control. In this study, advanced converting tools (die cutting tools and the press forming mould) are created for production scale paperboard tray manufacturing. Also monitoring methods that enable the production of paperboard trays with enhanced quality, and can be utilized in process control are developed. The principles for tray blank preparation, including creasing pattern and die cutting tool design are introduced. The mould heating arrangement and determination of mould clearance are investigated to improve the quality of the press formed trays. The effect of the spring back of the tray walls on the tray dimensions can be managed by adjusting the heat-related process parameters and estimating it at the mould design stage. This enables production speed optimization as the process parameters can be adjusted more freely. Real-time monitoring of pressing force by using multiple force sensors embedded in the mould structure can be utilized in the evaluation of material characteristics on a modified production machinery. Comprehensive process control can be achieved with a combination of measurement of the outer dimensions of the trays and pressing force monitoring. The control method enables detection of defects and tracking changes in the material properties. The optimized converting tools provide a basis for effective operation of the control system.

Control of multi-actuator system by an electrically driven hydraulic pump-motor

The awareness and concern of our environment together with legislation have set more and more tightening demands for energy efficiency of non-road mobile machinery (NRMM). Integrated electro-hydraulic energy converter (IEHEC) has been developed in Lappeenranta University of Technology (LUT). The elimination of resistance flow, and the recuperation of energy makes it very efficient alternative. The difficulties of IEHEC machine to step to the market has been the requirement of one IEHEC machine per one actuator. The idea is to switch IEHEC between two actuators of log crane using fast on/off valves. The control system architecture is introduced. The system has been simulated in co-simulation using two different software. The simulated responses of pump-controlled system is compared to the responses of the conventional valve-controlled system.

The death and resurrection of 'economics with psychology': remarks from a methodological standpoint

One of the merits of contemporary economic analysis is its capacity to offer accounts of choice behavior that dispense with details of the complex decision machinery. The starting point of this paper is the concern with the important methodological debate about whether economics might offer accurate predictions and explanations of actual behavior without any reference to psychological presuppositions. Inspired by an exercise of rational reconstruction of ideas, I aim to offer an interpretation of the process of freeing economic analysis from psychology at the end of the 19th century and the contemporary resurrection of behavioral approaches in the late 1980s.

Sinister creativity: a phenomenological exploration of some of the experiences and perceptions of six lefthanded visual artists

Six lefthanded artist-educators were interviewed to attempt to discover any patterns t6 their perceptions and experiences. Artists have their own culture and priorities. According to the literature, lefthanded people appear more likely to suffer from dyslexia, allergies, asthma and other auto-immune diseases as well as machinery and equipment injuries. Patterns emerging suggested that lefthanded people indeed suffer more from dyslexia. More startling was the distinct possibility that many artists have traumatic childhood histories. This would commonly include negative school experiences, and for a significant number sexual assault, perceived or actual abandonment by parents, and/or consistently low selfesteem. The researcher discovered possible reasons why creative people frequently have problems at school, why they tend to be rebellious and anti-establishment oriented, how many of them perceive societal rules, and why they are more likely to be lefthanded. These characteristics all have significant implications for art school administrators.

A. S. Whiting Manufacturing Company Limited, minute book, 1872-1909.

The Cedar Dale Scythe Works was the second manufacturing company that A.S. Whiting had established in Oshawa, the first being the Oshawa Manufacturing Co. in 1852. The Oshawa Manufacturing Co. was eventually taken over by the Joseph Hall Works in 1857. In 1862, the Cedar Dale Works was built after being in a rented space in the Hall Works for two years, building scythes and hoes. With the building of the firm, the village of Cedar Dale was established. In 1867, the firm became Whiting and Cowan when John Cowan bought into the company. After the death of Whiting in 1867, his son-in-law, R.S. Hamlin headed the company. By 1872, it became the A.S. Whiting Manufacturing Co. when Cowan withdrew from the business. Before Whiting’s death, the company had been profitable but due to new machinery being developed, hand tools were becoming obsolete and the business only lasted for a few more years (source: Oshawa Community Museum and Archives Web site).

Niagara-Welland Power Company Limited fonds, 1833, 1852, 1904-1906, 1909, n.d.

The Welland Power and Supply Canal Company Limited, established in 1893 and incorporated in 1894 with a capital stock of $500,000. The aim of the company was to harness the natural water supply of the Niagara and Welland Rivers. In 1898 the Canadian Electrical News published a report by Henry Symons, QC outlining the main project of the company. This project involves the construction of a canal from the Welland River to the brow of the mountain at Thorold, a distance of 8 miles; the construction at Thorold of a power house, and from Thorold to Lake Ontario, a raceway by which to carry water into the lake. The estimate for the machinery to generate 100,000 horse power is £125,000; for transmission line to Toronto at a voltage of 10,000….The total estimate therefore amounts to £2,452,162, or roughly speaking, $12,000,000. Source: Canadian Electrical News, August 1898, p. 172. In 1899 the company officers petitioned the federal government desiring a name change to the Niagara-Welland Power Company Limited. Officers of the company were Harry Symons, President; Charles A. Hesson, Vice-President; and M.R. O’Loughlin, James B. Sheehan, James S. Haydon, Frederick K. Foster, directors; John S. Campbell, secretary-treasurer. The company’s head offices were located in St. Catharines, with a New York (City) office on Broad Street. In 1905 and 1909 the company petitioned the federal government for additional time to construct its works, which was granted. The company had until May 16, 1915 to complete construction. John S. Campbell (1860-1950) was a graduate of the University of Toronto and Osgoode Hall. During his university years John began his military career first in "K" Company, Queens Own rifles and then later as Commanding Officer of the 19th Lincoln Regiment, from 1906 to 1910. Upon his return to St. Catharines John Campbell served as secretary in the St. Catharines Garrison Club, a social club for military men begun in 1899. After being called to the Bar, he became a partner in the firm of Campbell and McCarron and was appointed to the bench in 1916, serving until retirement in 1934. Judge Campbell served as an alderman for several terms and was the mayor of St. Catharines in 1908 and 1909. He also served as the first chairman of the St. Catharines Public Utilities in 1914. John S. Campbell was married to Elizabeth Oille, daughter of Jerome B. and Charlotte (St. John) Oille. The family home "Cruachan" was located at 32 Church St.

John O. McKellar (ship) certificates, 1952-1983.

The John O. McKellar was a ship that belonged to the Scott Misener fleet. The first ship named after McKellar was launched on Januaray 25, 1929, from Wallsend, England, and was bound for Sault St. Marie, Ontario. This ship became part of the Colonial Steamship Company in 1950, and in 1952 was renamed the J.G. Irwin when construction of a new John O. McKellar was completed. John Oscar McKellar was born on June 28, 1878 in Lobo Township, Middlesex County, west of London, Ont. He worked as a marine engineer, and became acquainted with Robert Scott Misener when the two were shipmates serving with the Algoma central fleet. In 1919, the two men joined forces to run a shipping company. Together, they purchased the wooden steamer "Simon Langell", and worked together on the ship for the next three years. Throughout his career with Misener's company, John McKellar served as Chief Engineer, then Marine Superintendent, and finally Secretary-Treasurer. He died on September 19, 1951.

A Multi-Objective Genetic Algorithm with Side Effect Machines for Motif Discovery

Understanding the machinery of gene regulation to control gene expression has been one of the main focuses of bioinformaticians for years. We use a multi-objective genetic algorithm to evolve a specialized version of side effect machines for degenerate motif discovery. We compare some suggested objectives for the motifs they find, test different multi-objective scoring schemes and probabilistic models for the background sequence models and report our results on a synthetic dataset and some biological benchmarking suites. We conclude with a comparison of our algorithm with some widely used motif discovery algorithms in the literature and suggest future directions for research in this area.

Fluorescence Studies of Photosystem II Fluorescence Quenching During Desiccation

Poikilohydric organisms have developed mechanisms to protect their photosynthetic machinery during times of desiccation. In hydrated conditions nonphotochemical quenching (NPQ) mechanisms are able to safely dissipate excess excitation energy as heat, but mechanisms of NPQ associated with desiccation tolerance are still largely unclear. In the lichen Parmelia sulcata, photosystem protection has been associated with an energy quenching energetically coupled to PSII and characterized by a fast-fluorescence decay lifetime, and long-wavelength emission. The present study compares the relative ability of green algae and lichens to recover photosynthetic activity after periods of desiccation using steady state fluorescence emission spectroscopy, and picosecond time-resolved fluorescence decay measurements. It was determined that desiccation induced quenching involves an antenna quenching mechanism with similar characteristics appearing in both P. sulcata and green algae. Algae isolated from lichens suggest symbiosis in the lichen appears to enhance this naturally occurring phenomenon and provide greater protection during desiccation.

Photograph Negative - Donald Ziraldo working wine equipment

A photograph negative of Donald Ziraldo working a machine.