Evaluation of a multiobjective performance index for distribution systems with distributed generation

Here a multiobjective performance index for distribution systems with distributed generation based on a steady-state analysis of the network is proposed. This index quantifies the distributed generation impact on total losses, voltage profile and short circuit currents, and will be used as objective function in an evolutionary algorithm aimed at searching the best points for connecting distributed generators. Moreover, a loss allocation technique, based on the Zbus method, is applied on the original configuration of the network to obtain a good quality initial population. An IEEE medium voltage distribution network is analysed and results are presented and discussed.

A comparative study of the damping oscillation function of TCSC and UPFC

The main objective of this work is to analyze the ability of FACTS devices like TCSC and UPFC to damp low frequency oscillations and a POD controller is also included. A comparative study of damping effect of those devices IS carried out. The Power Sensitivity Model (PSM) is used to the representation of the electric power system. Sensibility analysis using the residue method shows the best place for the installation of FACTS and the procedure to determine POD parameters. ©2008 IEEE.

The Poisson-exponential lifetime distribution

In this paper we proposed a new two-parameters lifetime distribution with increasing failure rate. The new distribution arises on a latent complementary risk problem base. The properties of the proposed distribution are discussed, including a formal proof of its probability density function and explicit algebraic formulae for its reliability and failure rate functions, quantiles and moments, including the mean and variance. A simple EM-type algorithm for iteratively computing maximum likelihood estimates is presented. The Fisher information matrix is derived analytically in order to obtaining the asymptotic covariance matrix. The methodology is illustrated on a real data set. © 2010 Elsevier B.V. All rights reserved.

Micromechanics of dentin/adhesive interface in function of dentin depth: 3d finite element analysis

Objectives: The aim of this study was to analyze the stress distribution on dentin/adhesive interface (d/a) through a 3-D finite element analysis (FEA) varying the number and diameter of the dentin tubules orifice according to dentin depth, keeping hybrid layer (HL) thickness and TAǴs length constant. Materials and Methods: 3 models were built through the SolidWorks software: SD - specimen simulating superficial dentin (41 x 41 x 82 μm), with a 3 μm thick HL, a 17 μm length Tag, and 8 tubules with a 0.9 μm diameter restored with composite resin. MD - similar to M1 with 12 tubules with a 1.2 μm diameter, simulating medium dentin. DD - similar to M1 with 16 tubules with a 2.5 μm diameter, simulating deep dentin. Other two models were built in order to keep the diameter constant in 2.5 μm: MS - similar to SD with 8 tubules; and MM - similar to MD with 12 tubules. The boundary condition was applied to the base surface of each specimen. Tensile load (0.03N) was performed on the composite resin top surface. Stress field (maximum principal stress in tension - σMAX) was performed using Ansys Wokbench 10.0. Results: The peak of σMAX (MPa) were similar between SD (110) and MD (106), and higher for DD (134). The stress distribution pathway was similar for all models, starting from peritubular dentin to adhesive layer, intertubular dentin and hybrid layer. The peak of σMAX (MPa) for those structures was, respectively: 134 (DD), 56.9 (SD), 45.5 (DD), and 36.7 (MD). Conclusions: The number of dentin tubules had no influence in the σMAX at the dentin/adhesive interface. Peritubular and intertubular dentin showed higher stress with the bigger dentin tubules orifice condition. The σMAX in the hybrid layer and adhesive layer were going down from superficial dentin to deeper dentin. In a failure scenario, the hybrid layer in contact with peritubular dentin and adhesive layer is the first region for breaking the adhesion. © 2011 Nova Science Publishers, Inc.

An efficient implementation of tabu search in feeder reconfiguration of distribution systems

This paper presents an efficient tabu search algorithm (TSA) to solve the problem of feeder reconfiguration of distribution systems. The main characteristics that make the proposed TSA particularly efficient are a) the way in which the neighborhood of the current solution was defined; b) the way in which the objective function value was estimated; and c) the reduction of the neighborhood using heuristic criteria. Four electrical systems, described in detail in the specialized literature, were used to test the proposed TSA. The result demonstrate that it is computationally very fast and finds the best solutions known in the specialized literature. © 2012 IEEE.

A mixed-integer linear programming approach for optimal type, size and allocation of distributed generation in radial distribution systems

This paper presents a mixed-integer linear programming approach to solving the problem of optimal type, size and allocation of distributed generators (DGs) in radial distribution systems. In the proposed formulation, (a) the steady-state operation of the radial distribution system, considering different load levels, is modeled through linear expressions; (b) different types of DGs are represented by their capability curves; (c) the short-circuit current capacity of the circuits is modeled through linear expressions; and (d) different topologies of the radial distribution system are considered. The objective function minimizes the annualized investment and operation costs. The use of a mixed-integer linear formulation guarantees convergence to optimality using existing optimization software. The results of one test system are presented in order to show the accuracy as well as the efficiency of the proposed solution technique.© 2012 Elsevier B.V. All rights reserved.

Branchial O2 chemoreceptors in Nile tilapia Oreochromis niloticus: Control of cardiorespiratory function in response to hypoxia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Espectroscopia de impedância em vidros 22Na2O·8CaO·65SiO2·5MO2 (M = Si, Ti, Ge, Zr, Sn, Ce) sem e com troca iônica Ag+ Na+

Pós-graduação em Física - IGCE

The employment situation in Latin America and the Caribbean: Labour productivity and distribution issues

Although the economies of Latin America and the Caribbean grew more slowly in 2011 than in 2010, there were some improvements on the employment front. Workers benefited from the region’s satisfactory economic performance in an increasingly complex international setting. The unemployment rate fell from 7.3% in 2010 to 6.7% in 2011 thanks to a halfpercentage- point gain in the urban employment rate. Both rates are at levels that have not been seen for a long time. The proportion of formal jobs with social benefits rose as well, and underemployment declined. The average wage and the minimum wage both increased in real terms, albeit only moderately. Economic performance and the employment situation varied widely among the subregions. The unemployment rate dropped by 0.6 percentage points in South America but 0.4 percentage points in the countries of the northern part of Latin America. In the countries of the Caribbean, the employment rate was up by 0.2 percentage points. The data show that substantial labour market gaps and serious labour-market insertion issues remain. This is especially the case for women and young people, for whom unemployment rates and other labour indicators are still unfavourable. The second part of this report looks at whether the fruits of economic growth and rising productivity have been distributed equitably between workers and companies. Between 2002 and 2008 (the most recent expansionary economic cycle), wages as a percentage of GDP fell in 13 of the 21 countries of the region for which data are available and rose in just 8. This points to redistribution that is unfavourable to workers, which is worrying in a region which already has the most unequal distribution of income in the world. Underlying this trend is the fact that, worldwide, wages have grown less than productivity. Beyond the ethical dimension of this issue, it jeopardizes the social and economic sustainability of growth. For example, one of the root causes of the recent financial crisis was that households in the United States responded to declining wage income by borrowing more to pay for consumption and housing. This turned out to be unsustainable in the long run. Over time, it undermines the labour market’s contribution to the efficient allocation of resources and its distributive function, too, with negative consequences for democratic governance. Among the triggers of this distributive worsening most often cited in the global debate are market deregulation and its impact on financial globalization, technological change that favours capital over labour, and the weakening of labour institutions. What is needed here is a public policy effort to help keep wage increases from lagging behind increases in productivity. Some countries of the region, especially in South America, saw promising developments during the second half of the 2000s in the form of a positive trend reversal in wages as a percentage of GDP. One example is Brazil, where a minimum wage policy tailored to the dynamics of the domestic market is considered to be one of the factors behind an upturn in the wage share of GDP. The region needs to grow more and better. Productivity must grow at a steady pace, to serve as the basis for sustained improvements in the well-being of the populace and to narrow the gap between the economies of Latin America and the Caribbean and the more advanced economies. And inequality must be decreased; this could be achieved by closing the productivity gap between upgraded companies and the many firms whose productivity is low. As set out in this report, the region made some progress between 2002 and 2010, with labour productivity rising at the rate of 1.5% a year. But this progress falls short of that seen in other regions such as Sub-Saharan Africa (2.1%) and, above all, East Asia (8.3%, not counting Japan and the Republic of Korea). Moreover, in many of the countries of the region these gains have not been distributed equitably. Therein lies a dual challenge that must be addressed: continue to increase productivity while enhancing the mechanisms for distributing gains in a way that will encourage investment and boost worker and household income. The Economic Commission for Latin America and the Caribbean (ECLAC) and the International Labour Organization (ILO) estimate that the pace of economic growth in the region will be slightly slower in 2012 than in 2011, in a global economic scenario marked by the cooling of several of the main economic engines and a high degree of uncertainty concerning, above all, prospects for the euro zone. The region is expected to continue to hold up well to this worsening scenario, thanks to policies that leveraged more favourable conditions in the past. This will be felt in the labour markets, as well, so expectations are that unemployment will edge down by as much as two tenths of a decimal point.

Propriedades ópticas em filmes de opalas sintéticas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelamento do transporte eletrônico em dispositivos moleculares

No presente trabalho, simulamos as propriedades de transporte e espectro de absorção do composto orgânico Vermelho de Etila. Este é o primeiro estudo teórico de um indicador específico de pH utilizado como nanodispositivo, com base na teoria quântica e no modelo de transporte não-difuso. A distribuição de carga ao longo da molécula é determinada através da técnica, Ab initio, como uma função de um campo elétrico externo. Baseado em um modelo de multiníveis ressonantes também calculamos a corrente como função da tensão de polarização. O acúmulo de carga e a corrente apresentam comportamento semelhante, como a condução do tipo ressonante e curvas carga-tensão e corrente-tensão assimétricas. Os principais resultados sugerem que o sistema presente poderia funcionar como um transistor molecular bi-direcional. Estendemos esta metodologia de análise para outro dispositivo molecular, mas composto de três terminais. Para este sistema, nossa descoberta principal é a resistência diferencial negativa (RDN) na carga Q como uma função do campo elétrico externo. Para explicar este efeito RDN, aplicamos um modelo capacitivo fenomenológico, também baseado em um sistema de multiníveis localizados (que podem ser os LUMOs – Lowest Unoccupied Molecular Orbital – Orbitais moleculares desocupados mais baixos). A capacitância descreve, por efeito de carregamento, a causa do bloqueio de Coulomb (BC) no transporte. Mostramos que o efeito BC dá origem a uma RDN para um conjunto adequado de parâmetros fenomenológicos como: taxa de tunelamento e energia de carregamento. O perfil da RDN obtida nas duas metodologias, ab initio e fenomenológica, estão em comum acordo.

Relationships between dendritic morphology, spatial distribution and firing patterns in rat layer 1 neurons

The cortical layer 1 contains mainly small interneurons, which have traditionally been classified according to their axonal morphology. The dendritic morphology of these cells, however, has received little attention and remains ill defined. Very little is known about how the dendritic morphology and spatial distribution of these cells may relate to functional neuronal properties. We used biocytin labeling and whole cell patch clamp recordings, associated with digital reconstruction and quantitative morphological analysis, to assess correlations between dendritic morphology, spatial distribution and membrane properties of rat layer 1 neurons. A total of 106 cells were recorded, labeled and subjected to morphological analysis. Based on the quantitative patterns of their dendritic arbor, cells were divided into four major morphotypes: horizontal, radial, ascendant, and descendant cells. Descendant cells exhibited a highly distinct spatial distribution in relation to other morphotypes, suggesting that they may have a distinct function in these cortical circuits. A significant difference was also found in the distribution of firing patterns between each morphotype and between the neuronal populations of each sublayer. Passive membrane properties were, however, statistically homogeneous among all subgroups. We speculate that the differences observed in active membrane properties might be related to differences in the synaptic input of specific types of afferent fibers and to differences in the computational roles of each morphotype in layer 1 circuits. Our findings provide new insights into dendritic morphology and neuronal spatial distribution in layer 1 circuits, indicating that variations in these properties may be correlated with distinct physiological functions.

Prediction of dopant atom distribution on nanocrystals using thermodynamic arguments

A theoretical approach aiming at the prediction of segregation of dopant atoms on nanocrystalline systems is discussed here. It considers the free energy minimization argument in order to provide the most likely dopant distribution as a function of the total doping level. For this, it requires as input (i) a fixed polyhedral geometry with defined facets, and (ii) a set of functions that describe the surface energy as a function of dopant content for different crystallographic planes. Two Sb-doped SnO2 nanocrystalline systems with different morphology and dopant content were selected as a case study, and the calculation of the dopant distributions expected for them is presented in detail. The obtained results were compared to previously reported characterization of this system by a combination of HRTEM and surface energy calculations, and both methods are shown to be equivalent. Considering its application pre-requisites, the present theoretical approach can provide a first estimation of doping atom distribution for a wide range of nanocrystalline systems. We expect that its use will support the reduction of experimental effort for the characterization of doped nanocrystals, and also provide a solution to the characterization of systems where even state-of-art analytical techniques are limited.

Mylar Secondary Emission-energy Distribution and Yields

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Environmental factors modulating the abundance and distribution of Callinectes danae (Decapoda: Portunidae) from two areas of the southeastern coast of Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)