Estudo experimental do punçoamento centrado em lages de betão leve

As aplicações do betão com agregados leves foi iniciada há mais de dois milénios pelos Romanos, sendo esse material produzido inicialmente com agregados leves naturais. Apesar do uso em Portugal ainda ser reduzido, quando comparado com outros países da Europa e da América, a utilização do betão estrutural de agregados leves (BEAL) pode ser bastante vantajosa, principalmente em elementos de laje e tabuleiros de pontes, associando a redução do peso próprio a resistências elevadas. Além da eficiência de desempenho estrutural e das vantagens económicas globais, o BEAL apresenta geralmente elevado desempenho de durabilidade, sendo uma solução competitiva em obras de reabilitação e reforço estrutural e de elementos pré-fabricados. Uma vez que a aplicação de BEAL em elementos de laje é particularmente vantajosa e eficiente, o estudo do comportamento e respetiva resistência ao punçoamento é fundamental para os casos de lajes fungiformes em BEAL armado. Apesar dos recentes códigos europeus estabelecerem parâmetros e expressões de dimensionamento para esse tipo de betão, estes são geralmente baseados nos dos betões de densidade normal e corrigidos por coeficientes de correção para os BEAL, os quais resultam, por vezes, em desvios significativos. Aliando a este facto, a escassez de estudos experimentais para essa aplicação, o presente estudo surge nesse contexto. O trabalho de investigação apresentado tem como principal objetivo o estudo do punçoamento centrado em lajes de BEAL, variando a sua resistência. Para o efeito foram produzidas seis lajes, onde se utilizaram três tipos de BEAL com diferentes classes de resistência à compressão. Produziram-se duas lajes de cada classe de resistência e procedeu-se aos ensaios definidos, aplicando uma carga pontual no centro da laje, com aumento gradual até originar a rotura por punçoamento. Através da análise dos resultados dos ensaios, observou-se que, o aumento da resistência do betão à compressão originou maior capacidade resistente ao punçoamento e maior capacidade de deformação das lajes ensaiadas. Estudaram-se também os seguintes parâmetros, em função da resistência do BEAL: carga de fendilhação, rigidez, o ângulo do cone de punçoamento e o perímetro de contorno crítico. Os valores obtidos foram ainda comparados com as previsões de vários códigos de betão armado e apresentam-se as principais conclusões

Juzgados militares de España y sus Indias /

Contiene la jurisdicción del Real y Supremo Consejo de Guerra : de los Capitanes Generales, Gobernadores, Virreyes de Indias, y Auditores : los Juzgados de los Cuerpos de Casa Real, Artillería, Milicias regladas y Urbanas de España y sus Indias, de las Compañías sueltas, de los Regimientos Suizos, y de los Inválidos y Agregados.

ESTUDO COMPARATIVO DA COMPETITIVIDADE DAS EMPRESAS DE MÁQUINAS FERRAMENTAS BRASILEIRAS: ANÁLISE MULTICRITÉRIOS

O principal objetivo desta dissertação foi analisar por meio de estudo comparativo, o posicionamento competitivo de três máquinas ferramentas multitarefas. As hipóteses iniciais partiram das seguintes suposições: a) a indústria nacional de máquinas ferramentas esta sendo penalizada pela política industrial praticada pelo governo federal; e b) a importância relativa atribuída aos elementos multicriteriais das especificações das máquinas nacionais quando demonstram tendências elevadas, nem sempre alcançam as concorrentes importadas devido aos recursos tecnológicos agregados para se atingir a competitividade plena. Assim, indaga-se: até que ponto as máquinas ferramentas multitarefas selecionadas para o estudo, estão alinhadas com os critérios escolhidos e com suas importâncias relativas avaliadas por dois usuários desse equipamento. Como metodologia adotou-se estudo de caso múltiplo de duas empresas de médio porte do mesmo ramo. Utilizou-se o método multicritério de apoio à decisão por meio de Analytic Hierarchy Process (AHP), para a escolha da melhor alternativa entre máquinas ferramentas multitarefas similares, nacionais e importadas. Os resultados identificam que, para essas duas empresas usuárias pesquisadas, existe vantagem na aquisição da máquina importada, embora seja notório o avanço tecnológico da indústria nacional. Estas máquinas ainda carecem de algumas inovações, perdendo em competitividade, bem como em critérios importantes como versatilidade e rendimento. Com base nos trabalhos, conclui-se que, as máquinas ferramentas do tipo multitarefas nacionais das duas empresas fornecedoras analisadas não são competitivas em comparação as importadas.

Consumo privado de ansiolíticos benzodiazepínicos e sua correlação com indicadores sociodemográficos nas capitais brasileiras

This work aims to analyze the distribution of anxiolytics and their frequency of consumption in the period of 2010 to 2012, on the Federal District and at other Brazilian cities, as well as evaluating the correlation between such consumption and its demographic, epidemiological, economic and social characteristics for each region of this study. Into the analysis, it was observed that social, economic and cultural factors seem to influence the over-consumption of these drugs in many countries. Based on this, the benzodiazepines (BDZs) have achieved great popularity among members of the medical community and among the general population, mainly because of its safety and effectiveness in controlling symptoms of anxiety, insomnia and convulsions. Concerning the methodology of this work, an ecological study was performed having as sampling Brazilian capitals and as data source the 2010 Population Census, as well as information from IBGE, DATASUS and ANVISA. Still in the case of the methodological procedure, a multiple linear regression was used. Through descriptive analysis, it was demonstrated that the Northern region has the lowest average on consumption of these drugs (being 0.24 DHD in Manaus); meanwhile in the capitals of the Southeast, higher means were identified (reaching 7.29 DHD in Belo Horizonte), with a national average of 3.04 DHD. Among the drugs analyzed, it was found that Alprazolam is the most dispensed by pharmacies and private drugstores, averaging 2.00 DHD for Brazilian capitals. A análise de regressão linear múltipla mostrou que 76% da variação no consumo foi explicada pela variação da densidade populacional (β = 0,310 p = 0,045) e pela percentagem de médicos (β = 0,507 p = 0,016). Therefore, it was concluded that the consumption of anxiolytics of short half-life has been increasing over the years, mainly in the cities of greater population density and with the highest concentration of doctors

Utilização do resíduo grosso do beneficiamento da scheelita em aplicações rodoviárias

Mining is an activity of great economic and social value, assisting in the development of the country. However, it can be extremely harmful to the environment if no proper waste management study exists as mitigation measure its effects. Sample some of these harmful effects are pollution: water, through the seepage of waste into the groundwater; soil; of fauna and flora; sound (due to the noise of machines); visual from the residue stored in the open, changing the local landscape; and air. One way to mitigate environmental impacts caused by mining is the proper management of their waste through their use on highways. To that end, this paper proposes to give an appropriate destination to grit coming from the beneficiation of scheelite, due to mining activity from mining group Tomaz Salustino in Brejuí mine, located in the city of Currais Novos in the state of Rio Grande do Norte. This work was developed in four stages. The first comprised the chemical and mineralogical tests, DRX and FRX in which they sought to discover the composition of the material studied. The next step involved the physical characteristics of the waste by means of specific tests and grinding the solid mass, LL and LP. The third stage included the specific tests applied to the pavement, with the compaction test and test Index Support California. Finally, the fourth stage was the mechanical characterization, represented by direct shear tests, both in the flooded condition and not in flooded condition. The technical feasibility of using the modified energie compacted in layers of subbase power has been verified. In normal and intermediate energies is feasible to use less noble as layers as the subgrade. The incorporation of the waste in layers of road pavements provide an alternative to conventionally used in paving aggregates, providing a proper disposal of tailings from scheelite, as well as environmental preservation

Contabilidade do crescimento pelo lado da demanda agregada: uma proposta de cálculo das contribuições ao crescimento pela demanda agregada para o Brasil de, 2000 a 2009, utilizando matrizes insumo-produto

The demand side growth accounting studies the demand aggregate component contributions in the Gross Domestic Product (GDP). Traditionally, international and national organizations that uses the traditional method for calculating such contributions. However, this method does not take into account the effect the induction of imports by the various components of aggregate demand on the calculation of these. As an alternative to this method are presented others studies that consider this effect, as the alternative method proposed by Lara (2013), the attribution method, proposed by Kranendonk and Verbruggen (2005) and Hoekstra and van der Helm (2010), and the method the sraffian supermultiplier, by Freitas and Dweck (2013). Was made a summary of these methods, demonstrating the similarities and differences between them. Also, in the aim to contribute to the study of the subject was developed the “method of distribution of imports” that aims to distribute imports for the various components of aggregate demand, through the information set forth in the input-output matrices and tables of resources and uses. Were accounted the contributions to the growth of macroeconomic aggregates for Brazil from 2001 to 2009 using the method of distribution, and realized comparison with the traditional method, understanding the reasons for the differences in contributions. Later was done comparisons with all the methods presented in this work, between the calculated contributions to the growth of the components of aggregate demand and the domestic and external sectors. Was verified that the methods that exist in the literature was not enough to deal with this question, and given the alternatives for contributions to the growth presented throughout this work, it is believed that the method of distribution provides the best estimates for the account of contributions by aggregate demand sector. In particular, the main advantage of this method to the others is the breakdown of the contribution of imports, separated by aggregate demand component, which allows the analysis of contribution of each component to GDP growth. Thus, this type of analysis helps to study the pattern of growth of the Brazilian economy, not just the theoretical point of view, but also empirical and basis for the decision to economic policies

Características estruturais e fotocatalíticas do compósito oxihidróxido de nióbio/vermiculita

The preparation of nanostructured materials using natural clays as support, has been studied in literature under the same are found in nature and consequently, have a low price. Generally, clays serve as supports for metal oxides by increasing the number of active sites present on the surface and can be applied for various purposes such as adsorption, catalysis and photocatalysis. Some of the materials that are currently highlighted are niobium compounds, in particular, its oxides, by its characteristics such as high acidity, rigidity, water insolubility, oxidative and photocatalytic properties. In this scenario, the study aimed preparing a composite material oxyhydroxide niobium (NbO2OH) / sodium vermiculite clay and evaluate its effectiveness with respect to the natural clay (V0) and NbO2OH. The composite was prepared by precipitation-deposition method and then characterized by X-ray diffraction, infrared spectroscopy (XRD), energy dispersive X-ray (EDS), thermal analysis (TG/DTG), scanning electron microscopy (SEM), N2 adsorption-desorption and investigation of distribution of load. The application of the material NbO2OH/V0 was divided in two steps: first through oxidation and adsorption methods, and second through photocatalytic activity using solar irradiation. Studies of adsorption, oxidation and photocatalytic oxidation monitored the percentage of color removal from the dye methylene blue (MB) by UV-Vis spectroscopy. The XRD showed a decrease in reflection d (001) clay after modification; the FTIR indicated the presence of both the clay when the oxyhydroxide niobium to present bands in 1003 cm-1 related to Si-O stretching bands and 800 cm-1 to the Nb-O stretching. The presence of niobium was also confirmed by EDS indicated that 17 % by mass amount of the metal. Thermal analysis showed thermal stability of the composite at 217 °C and micrographs showed that there was a decrease in particle size. The investigation of the surface charge of NbO2OH/V0 found that the material exhibits a heterogeneous surface with average low and high negative charges. Adsorption tests showed that the composite NbO2OH/V0 higher adsorption capacity to remove 56 % of AM, while the material removed from V0 only 13 % showed no NbO2OH and adsorptive capacity due to the formation of H-aggregates. The percent removal of dye color for the oxidation tests showed little difference from the adsorption, being 18 and 66 % removal of dye color for V0 and NbO2OH/V0 respectively. The NbO2OH/V0 material shows excellent photocatalytic activity managing to remove just 95,5 % in 180 minutes of the color of MB compared to 41,4 % and 82,2 % of V0 the NbO2OH, proving the formation of a new composite with distinct properties of its precursors.

Avaliação da variação sedimentológica em uma área da plataforma continental sob a atuação da indústria petrolífera

Petroleum exploration activity occurs on the offshore Potiguar Basin, from very shallow (2-3 m) until about 50 m water depth, extending from Alto de Touros (RN) to Alto de Fortaleza (CE). Take in account the biological importance and the heterogeneity of sediments on this area, it is necessary the understanding of the sedimentological dynamics, and mainly the changes generated by petroleum exploration to prevent possible damages to environment. Despite the intense activity of oil exploration in this area, research projects like these are still rare. In view to minimize this gap, this study was developed to evaluate sedimentological, mineralogical and geochemical changes in the vicinity of a exploration well, here designated as well A, located on the Middle continental shelf, near the transition to Outer shelf. The well selected for this study was the first one drilled with Riserless Mud Recovery technology (RMR) in Brazil. The main difference from this to the conventional method is the possibility of drilling phase I of the well with return of drilling material to the rig tank, minimizing fluid and gravel discharging around the vicinity, during this phase. Monitoring consisted of three surveys, first of them done before start drilling, the second one done 19 days after the end of drilling and the third one done one year after then. Comparison of the studied variables (calcium carbonate and organic matter content, sediment size, mineralogy and geochemistry) was done with their average, median and coefficient of variation values to understand the changes after drilling activity. Because operating company technical reasons, the well location was changed after the first survey (C1), resulting in a shift of the sampled area on the two last surveys (C2 e C3). Nevertheless, the acquired data presented a good correlation, with no loss to the mean goal of the study. The sedimentological, mineralogical and geochemical analyzes were done at Federal University of Rio Grande do Norte (UFRN). The results indicated a predominantly sandy environment along the three surveys. It was noticed that the first survey (C1), presented different values for all the studied variables than to the second (C2) and third (C3) surveys, which had similar values. Siliciclastic sediments are prevalent at all surveys, and quartz is the main component (more than 80%). Heavy minerals (garnet, turmaline, zircon and lmenite), rock fragments and mud aggregates also was described. Bioclastic sediments are dominated by coralline algae (more than 45%) and mollusks (more than 30%), followed by benthic foraminifera, bryozoans and worm tubes. More rarely was observed ostracoda and spike of calcareous sponge. Because the low changes of the sediments at the studied area and by the using of RMR method in the drilling, it was possible to conclude that drilling activity did not promote significant alteration on the local sediment cover. Changes in the studied variables before and after drilling activity could be influenced by the changing in the sampling area after survey 1 (C1).

Caracterização de resíduos oriundos do beneficiamento do minério de ferro para uso em pavimentação

Mining in Brazil has a key role in economic and social development, contributing directly to improve the lives of the population. However, the mining activity even if done responsibly and with a proper study of waste management to reduce the impact of its effects, may cause harmful damage to the environment. Other forms of pollution are also caused due to mining activity. The visual pollution caused by the waste storage at open sky, in addition to the noise pollution caused by the excessive noise of the machines both in the extraction of ore, as in processing. An alternative way to lessen the environmental impacts caused by mining is the use of waste in layers that will compose the pavements along the highways. Thus, this work sets out to give a proper disposal of the wastes from the processing of iron ore, resulting from the mining activity of the group of mining Mhag Services and Mining S/A, in the mine of Bonito, located in Jucurutu, a town in the state of Rio Grande do Norte. The residues of the iron ore were stabilized with a granular soil from the city of Macaiba, also in the state of Rio Grande do Norte, which is being used in the duplication of the BR-304 referring to the entitled passage of Reta Tabajara. The present work was developed in three stages, being the first one divided by the chemical and mineralogical tests, by the tests of physical characterization and by the tests of paving for the residues of the iron ore. The second stage corresponds to the same tests being performed for granular soil. The third stage includes the essays abovementioned for three different mixtures of iron ore waste and granular soil, being they: 15% of iron-ore waste and 85% of granular soil, 25% of iron-ore waste and 75% of granular soil, 50% of iron-ore waste and 50% of granular soil. The technical feasibility of using waste from the iron ore beneficiation was checked, compressed in the intermediate energy and modified for use in base layers, sub-base, reinforcement subgrade and subgrade. The incorporation of the residues originating from the improvement of the iron ore in highways will provide an alternative to the use of aggregate conventionally used in the paving, besides preserving the environment.

Gestão de resíduos sólidos domiciliares na cidade de Chibuto, província de Gaza Moçambique

This study analyzes the process of generation and management of solid waste in the Municipality of the City of Chibuto-Mozambique, drawing on the different approaches towards allocation and the socio-environmental implications resulting from this process and waste spatial distribution. To answer these objectives a questionnaire was administered to 367 households distributed in 14 neighborhoods of the city to elicit information on how solid waste is treated and what could be its impact on public health of the residents. From this perspective, the questionnaire gasp information from immigrant residents regarding both their origin, and socio economic condition. Apart from the questionnaire, semi-structured interviews were conducted to staff working on the Sanitation Sector, Urbanization Sector of the Chibuto Municipality, including the Health Service, and Women and Social Affairs. In addition to these data collection methods, for further discussion on the subject, the researcher draw a theoretical framework grounded through literature review, as well as systematic observation of the phenomenon. Research findings revealed that the solid waste collection services provided by the Chibuto Municipality do not follow the procedures laid down in the Regulation on Solid Waste Management, which advocates environmentally safe, sustainable, and complete management of waste. First, the services use open dumps for waste management. Secondly, waste collection does not cover all citizens living in the neighborhoods governed by the municipality, due to financial, technical, and organizational reasons. More importantly, the study found that due to this failure, more than 90% of households surveyed continue to use the traditional methods on waste management which include burning, or the burial techniques. On the other hand, some citizens throw waste on the streets, a method that threatens public health because it increases cases of diseases related to sanitation problems such as (diarrhea and malaria), especially in suburban and peripheral urban areas. Concerning with the above mentioned problems which constitute a real threat to the public health, some ways are proposed for more sustainable and spatially appropriate solid waste management through recycling, waste sorting, composting, reuse, and reduction of solid waste generation.

Incorporação do resíduo de cascalho de perfuração de poços de petróleo em formulações cerâmicas

During its operations, the oil industry generates a lot of waste, including gravel from drilling. Control of environmental impacts caused by this waste represents a major challenge. Such impacts can be minimized when it is given an appropriate management by being properly treated and properly disposed or recycled. The properties of these materials can be greatly influenced when a waste is added to its composition. This work aims to study the incorporation of gravel waste oil-well drilling in the standard body for production of red ceramic from a ceramic industry in São Gonçalo do Amarante / RN. The success of the incorporation can minimize costs in the production of ceramic pieces and reduce the environmental impacts caused by waste. The raw materials used were collected, characterized, and formulated with the percentages of 0%, 20% and 40% by weight of substitution of residue were synthesized at temperatures of 900, 1.010 and 1.120 °C using 30 minute firing intervals, 1 hour and 30min and 2 hours and 30 minutes, based on a factorial design 2³. Samples were then subjected to the tests of Water Absorption, Linear Retraction Firing, Flexural Rupture Strength, Apparent Porosity and Apparent Specific mass and Scanning Electron Microscopy (SEM) of break section. The results showed that the use of the residue for the manufacture of the ceramic products is possible (tiles, bricks and massive hollow bricks) replacing the clay to 40%, meeting the requirements of the standard and the literature for the technological properties of the final product.

Caracterização e separação física de placas de circuito impresso de computadores obsoletos

The unbridled consumption of electronic equipment associated with fast immersion of new technologies on the market leads to the accelerated growth of electronic waste. Such waste mostly contains printed circuit boards in its structure. Printed circuit boards have many metals, including heavy metals, being highly toxic. Electronic waste is discarded improperly and indiscriminately, usually without any previous treatment and with other municipal waste, contaminating the environment and causing serious problems to human health. Beyond these metals, there are also precious metals and high value-added basis, that can be recovered and recycled, reducing the exploration of natural resources. Thus, due to the high growth potential and reuse of these waste treatment processes, characterization and separation were applied to the printed circuit boards. The printed circuit boards were subjected to physical treatments such as dismantling, crushing, sizing separation, magnetic separation and chemical treatments such as pyrolysis and leaching. Through characterization process (pyrolysis and leaching) the proportions of the components of the granulometric range were determined: 46,08% of metals; 23,32% of polymers and 30,60% of ceramics. It was also observed by particle size separation that metal components tend to concentrate in coarse fractions, while polymeric and ceramic components in fine fractions. From the magnetic separation process was obtained 12,08% of magnetic material and 82,33% of non-magnetic material.

Near miss materno e iniquidades em saúde: análise de determinantes contextuais no Rio Grande do Norte, Brasil

The scope of this study was to identify socioeconomic contextual and health care factors in primary care associated with maternal near misses and their marker conditions. This is an ecological study that used aggregated data of 63 clusters formed by the municipalities of State of Rio Grande do Norte, Brazil, using the Skater method of area regionalization, as the unit of analysis. The ratio of maternal near misses and their marker conditions were obtained from the Hospital Information System of the Brazilian Unified Health System. In multiple linear regression analysis, there was a significant association between maternal near misses and variables of poverty and poor primary health care. Hypertensive disorders were also associated with poverty and poor primary care and the occurrence of hemorrhaging was associated with infant mortality. It was observed that the occurrence of maternal near misses is linked to unfavorable socioeconomic conditions and poor quality health care that are a reflection of public policies that accentuate health inequalities.

Near miss materno e iniquidades em saúde: análise de determinantes contextuais no Rio Grande do Norte, Brasil

The scope of this study was to identify socioeconomic contextual and health care factors in primary care associated with maternal near misses and their marker conditions. This is an ecological study that used aggregated data of 63 clusters formed by the municipalities of State of Rio Grande do Norte, Brazil, using the Skater method of area regionalization, as the unit of analysis. The ratio of maternal near misses and their marker conditions were obtained from the Hospital Information System of the Brazilian Unified Health System. In multiple linear regression analysis, there was a significant association between maternal near misses and variables of poverty and poor primary health care. Hypertensive disorders were also associated with poverty and poor primary care and the occurrence of hemorrhaging was associated with infant mortality. It was observed that the occurrence of maternal near misses is linked to unfavorable socioeconomic conditions and poor quality health care that are a reflection of public policies that accentuate health inequalities.

Fabrico, controlo de qualidade e colocação de mistura betuminosa em obra

Este relatório traduz o trabalho realizado na empresa Cimalha, Construções da Batalha S.A., durante 5 meses de estágio curricular. O relatório inicia-se com uma descrição da empresa e uma apresentação dos objetivos propostos para o estágio. Estes centram-se essencialmente nas questões inerentes ao controlo de qualidade do processo de fabrico e aplicação de misturas betuminosas. Este aspeto é de extrema relevância dado que é importante garantir que os investimentos realizados na construção de estradas tenham um controlo da qualidade adequado de modo a garantir a durabilidade pretendida e condições satisfatórias para a utilização [1]. Efetua-se a descrição das atividades realizadas, os ensaios realizados e análise dos resultados obtidos. Os ensaios e procedimentos seguiram vários documentos normativos, nacionais e estrangeiros, destacando-se o Caderno de Encargos Tipo Obra (CETO) publicado em Fevereiro de 2009 pela Estadas de Portugal, S. A. (EP) [2] atual Infraestruturas de Portugal, S. A. (IP) [3]. O estágio revelou-se como sendo uma importante componente da formação permitindo a consolidação e aplicação prática da formação teórica na área de atuação da empresa.