Serological evidence of Infection by Leishmania (Leishmania) infantum (Synonym: Leishmania (Leishmania) chagasi) in free-ranging wild mammals in a nonendemic region of the state of São Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Raman and infrared investigations of glass and glass-ceramics with composition 2Na2O·1CaO·3SiO2

Precursor glass and glass-ceramics with molar composition 2Na2O·1CaO·3SiO2 are studied by infrared, conventional, and microprobe Raman techniques. The Gaussian deconvoluted Raman spectrum of the glass presents bands at 625 and 660 cm-1, attributed to bending vibrations of Si-O-Si bonds, and at 860, 920, 975, and 1030 cm-1, attributed to symmetric stretching vibrations of SiO4 tetrahedra with 4, 3, 2, and 1 nonbridging oxygens, respectively. The Raman microprobe spectrum of a highly crystallized sample presents two narrow and intense bands at about 590 and 980 cm-1, associated with vibrations of SiO4 tetrahedra with two nonbridging oxygens, in agreement with the predicted chain-like structure of crystalline metasilicates. Scanning electron microscopy shows that the crystals distributed in partially crystallized samples have a spherical shape, built up by radially oriented needle-like single crystals. The Raman microprobe spectra of these spherulites show that they still contain residual amorphous material. A comparison of Raman and infrared spectra of amorphous and highly crystallized samples is presented.

Enhancement of Corrosion Resistance AISI 304 Steel by Plasma Polymerized Thin Films

The purpose of this work is the deposition of films in order to increase the corrosion resistance of AISI 304 steel, which is a material used to construct the reactors for bioethanol production. This deposition inhibits the permeation of corrosive species to the film-metal interface. Thin films were prepared by radio-frequency plasma enhanced chemical vapor deposition (RF-PECVD) method using plasmas of hexamethyldisiloxane/argon/oxygen mixtures excited by signals of different powers. The plasma was generated by the application of RF power of 13.56 MHz to the sample holder while keeping grounded the topmost electrode and the chamber walls. The effect of the RF power on the properties of the samples was investigated by perfilometry, X-ray photoelectron spectroscopy (XPS), contact angle, and electrochemical impedance spectroscopy (EIS). The results of the corrosion resistance tests of the AISI 304 steel were interpreted in terms of the energy delivered to the growing layer by plasma excitation power.

Motivos da recusa à doação de órgãos apontados familiares de pessoas com morte encefálica

Purpose: Study aiming to understand the reasons for the refusal to donate organs by relatives of potential donors living in the Mid-Western region of the São Paulo state. Method: Qualitative study performed after data collection by the Organ Procurement Organization (OPO) Division of a reference hospital in the region. Relatives were contacted to participate in a semi-structured interview, and after the subjects in the study were characterized, four guiding questions were presented; their respective answers were recorded to be transcribed later. The Analysis of Content method proposed by Bardin was used to organize the speeches. Results: From 2006 to 2008, 30 (35.3%) families contacted by OPO have refused to agree with the organ donation. From that universe, 16 family members were interviewed. Data was systematized in three major themes: The experience of being informed on a family member’s brain death, decision concerning to the organ donation and aspects that would facilitate the decision to agree with the organ donation. Conclusion: the identification of reasons for the refusal and the suggestions presented has provided subsidies to improve the organ donation for transplantation process.

Reproductive parameters of dairy goats submitted to estrus synchronization with prostaglandin F2a associated or not to hCG at estrous onset

Coodernação de Aperfeiçoamento de Pessoal de Nível Superior(CAPES)

Rabies in Experimentally Infected Bears, Ursus spp., with Epizootiologic Notes

Ten black bears, Ursus americanus Pallas, and three brown bears, U. arctos Linnaeus, were inoculated with rabies virus from naturally infected foxes in Alaska. The bears were more resistant than canine species, requiring at least 1,000 MLD50 of virus for infection. Low titres or negative results were obtained in salivary glands titrated in mice. Clinical course of the disease, post mortem findings, and microscopic lesions are described. Microscopic lesions were more· severe in brown bears, in which the inflammatory response was distinguished by the presence of numerous eosinophils in the perivascular infiltrate and among cells diffusely infiltrating the parenchyma. In both species, inclusion bodies were found only in the Purkinje cells of the cerebellum. Rabies is discounted as a factor in unprovoked attacks by bears on man at high latitudes. The epizootiology of rabies in a region where bears are numerous is discussed, with the conclusion that rabid foxes usually do not excrete sufficient quantities of virus in the saliva to infect bears. German title: Tollwut bei experimentell infizierten Bären, Ursus spp., mit epizootiologischen Anmerkungen German abtract: Zehn Schwarzbären, Ursus americanus Pallas, und drei Braunbären, U. arctos Linnaeus, wurden mit einem von Füchsen in Alaska isolierten Feldstamm des Tollwutvirus infiziert. Die Untersuchungsergebnisse lassen erkennen, daß Bären eine größere Resistenz gegenüber Tollwutinfektion aufweisen als hundeartige Karnivoren, und zwar konnten sie nicht mit weniger als 1000 MLD50 des Tollwutvirus infiziert werden. Das Virus war selten nachweisbar in den Speicheldrüsen der tollwuterkrankten Bären. Klinik und Pathologie der Tollwut bei Bären wurden kurz beschrieben. Die im Gehirn vorkommenden entzündlichen Veränderungen waren bei Braunbären besonders schwer und unterschieden sich durch die Häufigkeit der eosinophilen Leukozyten in den perivasculären und Gewebs-Infiltraten. Bei beiden Arten wurden Einschlußkörperchen nur in den Purkinje-Zellen beobachtet. Die Epizootiologie der Tollwut auf der Alaska-Halbinsel, wo Bären häufig vorkommen, wurde besprochen. Die Ergebnisse deuten an, daß Füchse wenig Virus mit dem Speichel ausscheiden, und selten soviel, daß es für die Infektion von Bären ausreicht. French title: La rage expérimentale chez les ours, Ursus spp., avec observations épizootiologiques French abstract: Dix ours noirs, Ursus americanus Pallas, et trois ours bruns, U. arctos Linnaeus, ont été inoculés avec de virus rabique provenant des renards infectés naturellement dans l'Alaska. Les ours Ont été plus résistants au virus que des espèces canines, et pour produire l'infection chez les ours, au moins 1000 MLD50 ont été requis. La titration des glandes salivaires chez des souris a données des titres peu éléves ou des résultats négatifs. La course clinique de la maladie, les observations des autopsies, et les lésions microscopiques sont decrites. Les lésions microscopiques les plus sévères ont été observées chez les ours bruns, dans lesquels la réponse inflammatoire a été distinguée par la présence de nombreux éosinophiles dans l'infiltration périvasculaire et parmi les cellules infiltrées diffusément dans Ie parenchyme. Chez les deux espèces des ours, des corps d'inclusion ont été trouvés seulement dans les cellules de Purkinje du cervelet. On a discuté l'épizootiologie de la rage dans une région où des ours sont nombreux, avec la conclusion qu'il y a dans la salive des renards rabiques une quantité de virus insuffisante pour infecter les ours. é ó í á ú Spanish title: Rabia en osos, Ursus spp., infectados experimentalmente, con anotaciones epizootológicas Spanish abstract: Diez osos negros, Ursus americanus Pallas, y tres osos pardos, U. arctos Linea, se infectaron con una estirpe campal de virus rábico aislada de zorros en Alasca. Los resultados de la experiencia permiten reconocer que los osos presentan una resistencia mayor frente a la infección rábica que los carnívoros cánidos, pues no se pudieron infectar con menos de 1.000 DML50 de virus rábico. El virus era muy raras veces identificable en las glándulas salivales de los osos enfermos de rabia. Se describen sucintamente la clínica y patología de la rabia en los osos. Las modificaciones inflamatorias en el cerebro eran muy graves en el oso pardo y se distinguían por la frecuencia de los leucocitos eosinófilos en los infiltrados perivasculares e hísticos. En ambas especies solo se hallaron corpúsculos de inclusión en las células de Purkinje. Se discute la epizootología de la rabia en la península de Alasca, donde es frecuente Ia presencia de osos. Los resultados señalan que los zorros eliminan poco virus con la saliva y casi nunca en cantidad tal que fuese suficiente para infectar los osos.

The reduced modulus in the analysis of sharp instrumented indentation tests

In the analysis of instrumented indentation data, it is common practice to incorporate the combined moduli of the indenter (E-i) and the specimen (E) in the so-called reduced modulus (E-r) to account for indenter deformation. Although indenter systems with rigid or elastic tips are considered as equivalent if E-r is the same, the validity of this practice has been questioned over the years. The present work uses systematic finite element simulations to examine the role of the elastic deformation of the indenter tip in instrumented indentation measurements and the validity of the concept of the reduced modulus in conical and pyramidal (Berkovich) indentations. It is found that the apical angle increases as a result of the indenter deformation, which influences in the analysis of the results. Based upon the inaccuracies introduced by the reduced modulus approximation in the analysis of the unloading segment of instrumented indentation applied load (P)-penetration depth (delta) curves, a detailed examination is then conducted on the role of indenter deformation upon the dimensionless functions describing the loading stages of such curves. Consequences of the present results in the extraction of the uniaxial stress-strain characteristics of the indented material through such dimensional analyses are finally illustrated. It is found that large overestimations in the assessment of the strain hardening behavior result by neglecting tip compliance. Guidelines are given in the paper to reduce such overestimations.

Numerical analysis of different methods to calculate residual stresses in thin films based on instrumented indentation data

In this work, different methods to estimate the value of thin film residual stresses using instrumented indentation data were analyzed. This study considered procedures proposed in the literature, as well as a modification on one of these methods and a new approach based on the effect of residual stress on the value of hardness calculated via the Oliver and Pharr method. The analysis of these methods was centered on an axisymmetric two-dimensional finite element model, which was developed to simulate instrumented indentation testing of thin ceramic films deposited onto hard steel substrates. Simulations were conducted varying the level of film residual stress, film strain hardening exponent, film yield strength, and film Poisson's ratio. Different ratios of maximum penetration depth h(max) over film thickness t were also considered, including h/t = 0.04, for which the contribution of the substrate in the mechanical response of the system is not significant. Residual stresses were then calculated following the procedures mentioned above and compared with the values used as input in the numerical simulations. In general, results indicate the difference that each method provides with respect to the input values depends on the conditions studied. The method by Suresh and Giannakopoulos consistently overestimated the values when stresses were compressive. The method provided by Wang et al. has shown less dependence on h/t than the others.

A simple and effective air shotgun for collecting small birds and other vertebrates at close range

Scientific collections are important sources of material for many areas of ornithological research. Although firearms (particularly shotguns) have been the standard for avian scientific collecting for more than 100 years, their use is restricted in many areas of the world. We describe a cheap, relatively silent, and effective air shotgun for collecting birds weighing up to 50 g at distances up to 4 m. This air shotgun is capable of shooting birdshot, uses hollow metal rivets connected to plastic straws as shot shells, and represents a simple adaptation of any 0.177 or 0.22 cal single-shot, break-barrel air rifle with at least 25 joules of muzzle energy. This air shotgun will be especially useful for focused sampling of birds (and other small vertebrates) in situations where firearm use or transport is restricted.

Comparison of zooplankton community structure between impacted and non-impacted areas of Paranagua Bay Estuarine Complex, south Brazil

We analysed the seasonal distribution of the zooplankton community in an anthropogenically impacted area (Paranagua Bay) and a non-impacted area (Laranjeiras Bay) of the Paranagua Bay Estuarine Complex. Large phytoplankton (>50 mu m) and zooplankton were collected every two months, between August 2003 and June 2004. The phytoplankton community was numerically dominated by diatoms (78%) and dinoflagellates (19%). Zooplankton abundance varied between 670 and 100,716 individuals m(-3), with a dominance of copepods, mainly the calanoids Acartia lilljeborgii, Acartia tonsa and Pseudodiaptomus acutus. A clear seasonal pattern was observed: copepods were significantly more abundant during the rainy than in the dry season. Significant differences in abundance between the two bays were detected only for cirripede larvae, which were more abundant in Paranagua Bay. This lack of difference between the two areas was probably a consequence of the water circulation along the estuary, which may have diluted and dispersed the pollutants from Paranagua Bay to other areas of the estuary.

Plasmonic Coupling in Er3+:Au Tellurite Glass

In this paper, we report on luminescence and absorbance effects of Er+3:Au-doped tellurite glasses synthesized by a melting-quenching and heat treatment technique. After annealing times of 2.5, 5.0, 7.5, and 10.0 h, at 300 A degrees C, the gold nanoparticles (GNP) effects on the Er+3 are verified from luminescence spectra and the corresponding levels lifetime. The localized surface plasmon resonance around 800 nm produced a maximum fluorescence enhancement for the band ranging from 800 to 840 nm, corresponding to the transitions H-4(11/2) -> aEuro parts per thousand I-4(13/2) (805 nm) and S-4(3/2) -> aEuro parts per thousand I-4(13/2) (840 nm), with annealing time till 7.5 h. The measured lifetime of the levels H-4(11/2) and S-4(3/2) confirmed the lifetime reduction due to the energy transfer from the GNP to Er+3, causing an enhanced photon emission rate in these levels.

Extraoral Implants in the Rehabilitation of Craniofacial Defects: Implant and Prosthesis Survival Rates and Peri-Implant Soft Tissue Evaluation

Purpose: Few reports have evaluated cumulative survival rates of extraoral rehabilitation and peri-implant soft tissue reaction at long-term follow-up. The objective of this study was to evaluate implant and prosthesis survival rates and the soft tissue reactions around the extraoral implants used to support craniofacial prostheses. Materials and Methods: A retrospective study was performed of patients who received implants for craniofacial rehabilitation from 2003 to 2010. Two outcome variables were considered: implant and prosthetic success. The following predictor variables were recorded: gender, age, implant placement location, number and size of implants, irradiation status in the treated field, date of prosthesis delivery, soft tissue response, and date of last follow-up. A statistical model was used to estimate survival rates and associated confidence intervals. We randomly selected 1 implant per patient for analysis. Data were analyzed using the Kaplan-Meier method and log-rank test to compare survival curves. Results: A total of 150 titanium implants were placed in 56 patients. The 2-year overall implant survival rates were 94.1% for auricular implants, 90.9% for nasal implants, 100% for orbital implants, and 100% for complex midfacial implants (P = .585). The implant survival rates were 100% for implants placed in irradiated patients and 94.4% for those placed in nonirradiated patients (P = .324). The 2-year overall prosthesis survival rates were 100% for auricular implants, 90.0% for nasal implants, 92.3% for orbital implants, and 100% for complex midfacial implants (P = .363). The evaluation of the peri-implant soft tissue response showed that 15 patients (26.7%) had a grade 0 soft tissue reaction, 30 (53.5%) had grade 1, 6 (10.7%) had grade 2, and 5 (8.9%) had grade 3. Conclusions: From this study, it was concluded that craniofacial rehabilitation with extraoral implants is a safe, reliable, and predictable method to restore the patient's normal appearance. (C) 2012 American Association of Oral and Maxillofacial Surgeons J Oral Maxillofac Surg 70:1551-1557, 2012

A marker-and-cell approach to free surface 2-D multiphase flows

This work describes a methodology to simulate free surface incompressible multiphase flows. This novel methodology allows the simulation of multiphase flows with an arbitrary number of phases, each of them having different densities and viscosities. Surface and interfacial tension effects are also included. The numerical technique is based on the GENSMAC front-tracking method. The velocity field is computed using a finite-difference discretization of a modification of the NavierStokes equations. These equations together with the continuity equation are solved for the two-dimensional multiphase flows, with different densities and viscosities in the different phases. The governing equations are solved on a regular Eulerian grid, and a Lagrangian mesh is employed to track free surfaces and interfaces. The method is validated by comparing numerical with analytic results for a number of simple problems; it was also employed to simulate complex problems for which no analytic solutions are available. The method presented in this paper has been shown to be robust and computationally efficient. Copyright (c) 2012 John Wiley & Sons, Ltd.

Synchrotron X-ray diffraction characterization of healthy and fluorotic human dental enamel

With the introduction of fluoride as the main anticaries agent used in preventive dentistry, and perhaps an increase in fluoride in our food chain, dental fluorosis has become an increasing world-wide problem. Visible signs of fluorosis begin to become obvious on the enamel surface as opacities, implying some porosity in the tissue. The mechanisms that conduct the formation of fluorotic enamel are unknown, but should involve modifications in the basic physical-chemistry reactions of demineralization and remineralisation of the enamel of the teeth, which is the same reaction of formation of the enamel's hydroxyapatite (HAp) in the maturation phase. The increase of the amount of fluoride inside of the apatite will result in gradual increase of the lattice parameters. The aim of this work is to characterize the healthy and fluorotic enamel in human tooth using Synchrotron X-ray diffraction. All the scattering profile measurements were carried out at the X-ray diffraction beamline (XRD1) at the Brazilian Synchrotron Light Laboratory-LNLS, Campinas, Brazil. X-ray diffraction experiments were performed both in powder samples and polished surfaces. The powder samples were analyzed to obtain the characterization of a typical healthy enamel pattern. The polished surfaces were analyzed in specific areas that have been identified as fluorotic ones. X-ray diffraction data were obtained for all samples and these data were compared with the control samples and also with the literature data. (c) 2012 Elsevier Ltd. All rights reserved.

Isokinetic muscle strength and knee function associated with double femoral pin fixation and fixation with interference screw in anterior cruciate ligament reconstruction

Intensive scheduling in sports requires athletes to resume physical activity shortly after injury. The purpose of this study was to investigate early isokinetic muscle strength and knee function on bone-patellar tendon-bone (BPTB) ACL reconstruction with double femoral pin fixation or interference screw technique. A prospective study was conducted from 2008 to 2009, with 48 athletes who received femoral BPTB fixation with interference screw (n = 26) or double pin (n = 22). Clinical (IKDC objective score and hop test) and isokinetic muscle strength (peak torque (PT), PT/body weight and flexion/extension rate (F/E) in 60 and 240A degrees/s) were analyzed at 6 months of follow-up. Analysis at baseline showed no differences between groups before surgery related to age, gender, associated injury, Tegner or Lysholm score; thus showing that groups were similar. During follow-up, however, there were significant differences between the two groups in some of the isokinetic muscle strength: PT/BW 60A degrees/s (Double Pin = 200% +/- A 13% vs. Interference Screw = 253% +/- A 16%*, *P = 0.01); F/E 60A degrees/s (Double Pin = 89% +/- A 29%* vs. Interference Screw = 74% +/- A 12%, *P = 0.04). No statistical differences between groups were observed on IKDC objective score, hop test and complications. The significant muscle strength outcome of the interference screw group found in this study gives initial evidence that this fixation technique is useful for athletes that may need accelerated rehabilitation. Early return to sports ability signaled by isokinetic muscle strength is of clinical relevance as it is one of the main goals for athletes' rehabilitation. III.