LUMINESCENCE OF DY3+ ENHANCED BY SENSITIZATION

Four types of sensitized luminescence of Dy3+ are reported: (1) by a host having a broad-band spectrum as in Na3Y0.99Dy0.01(VO4)(2); (2) by a sensitizer having a broad-band spectrum as in Ca2B2O5:Dy3+, Bi3+; (3) by a sensitizer having a narrow-band spectrum as in Mg2Gd7.9Dy0.1(SiO4)(6)O-2; (4) by a sensitizer having a broad-band spectrum and energy migration as in Gd compounds such as Ca1.96Pb0.04Gd7.9Dy0.1(SiO4)(6)O-2. The luminescent intensity of Dy3+ can be enhanced in these ways.

A STUDY ON THE LUMINESCENCE PROPERTIES OF EU3+ AND DY3+ IN M(2)RE(8)(SIO4)(6)O-2 (M=MG, CA RE=Y, GD, LA)

In this paper, the luminescence properties of Eu3+ and Dy3+ in the oxyapatites M(2)RE(8)(SiO4)(6)O-2 (M=Mg, Ca; RE=Y, Gd, La) were studied. The spectral characters of Eu3+ were discussed in relation to the crystal structure. The dependence of the red-to-orange intensity ratio and the position of the charge transfer band of Eu3+ and the yellow-to-blue intensity ratio of Dy3+ together with their fluorescence intensities (I-R for Eu3+ and I-Y for Dy3+) On the M(2+) and the substitution of BO45- and PO43- for SiO44- was discussed. Finally, the concentration quenching of Dy3+ luminescence was reported.

VOLTAMMETRY OF CYTOCHROME-C ENTRAPPED IN HYDROGEL MEMBRANE ON GRAPHITE ELECTRODE

The voltammetric behavior of cytochrome c entrapped in hydrogel membranes at paraffin wax-impregnated spectroscopic graphite electrodes (WISGE) was studied in this paper. A pair of well-defined peaks appeared at +70 mV (vs. Ag/AgCl). Beside these two peaks, another pair of peaks emerged at around +225 mV. Further investigations suggested that at least three states of cytochrome c existed in the membranes due to the special structure of the hydrogel. The native conformation of cytochrome c molecules was stabilized by the hydrophilic environment that was formed by the hydroxyl structure of the membranes and facilitated the cytochrome c electron transfer reaction at +70 mV. The molecules directly adsorbed on the surface of the graphite electrode were responsible for the redox peaks at around +225 mV. Whether the adsorption peaks were detectable or not was related to the thickness of membranes and the pre-retaining time before the formation of membranes.

TEMPERATURE EFFECT ON IMPACT FRACTURE-TOUGHNESS AND FRACTURE MECHANISM OF PHENOLPHTHALEIN POLY(ETHER KETONE)

Phenolphthalein poly(ether ketone) (PEK-C) was tested using an instrumented impact tester to determine the temperature effect on the fracture toughness K-c and critical strain energy release rate G(c). Two different mechanisms, namely the relaxation processes and thermal blunting of the crack tip were used to explain the temperature effect on the fracture toughness. Examination of the fracture surfaces revealed the presence of crack growth bands. It is suggested that these bands are the consequence of variations in crack growth along crazes that are formed in the crack tip stress field. As the crack propagates, the stress is relaxed locally, decreasing the growth rate allowing a new bundle of crazes to nucleate along which the crack advances.

COMPARISON OF THE CRACK-GROWTH METHOD AND THE CRACK STRESS WHITENING ZONE METHOD FOR THE FRACTURE-TOUGHNESS DETERMINATION OF PHENOLPHTHALEIN POLY(ETHER KETONE)

Fracture toughness values of phenolphthalein poly(ether ketone) (PEK-C) at 190 degrees C were determined by two different methods, i. e. the conventional crack growth method and the crack stress whitening zone method, which show consistent results. This indicates that the crack stress whitening zone method can be used to determine the crack initiation of some polymers for which the blunting line concept is unsuitable.

La_(2—x)Sr_xCoO_4±λ(x=0～2)的合成,表征和完全氧化催化性能的研究

合成了x值不同的La_(2-x)Sr_xCoO_4±λ(x=0～2)系列复合氧化物.用XRD研究了这一系列氧化物的晶体结构,结果表明x在0.25～1.5之间可形成具有K_2NiF_4结构的复合氧化物.用化学分析方法测定了过渡金属Co的价态和±λ含量与x值的关系.用IR,TPD,TPR,XPS,SEM等方法研究了这类复合氧化物的氧化还原性能,所含不同氧种,考察了对CH_4,CO的完全氧化活性,并对其活性与化学组成及结构间的关系进行了讨论.

涂渍极性及强极性固定相硅膜改性弹性玻璃毛细管柱的研制

本工作研究了极性、强极性固定液直接涂渍在硅膜改性弹性玻璃毛细管内壁上,经优化温度老化色谱柱,成功地研制出OV-225、DEGS、Silar5、Silar9、Silar10等硅膜改性弹性玻璃毛细管柱。各种柱子均具有柱效高、惰性好、热稳定性好的色谱性能。

四苯基卟啉及其金属配合物的裂解色谱研究

四苯基卟啉及其铁、锰等金属配合物是一类具有较大分子量、非挥发性的卟啉衍生物。由于结构和性能上的特点,这类物质成为有机合成中一种新型催化剂。关于这类物质的裂解研究尚未见有文献报道。本文用裂解色谱法(PGC)考察了它们的热裂解

聚三甲硅基丙炔膜表面改性的XPS研究——Ⅰ.用N-溴代丁二酰亚胺的表面改性

用N-溴代丁二酰亚胺的丙酮溶液在回流温度下对三甲硅基丙炔的均聚物和共聚物作了表面改性。XPS的研究表明,试样表面层中Br原子含量随溴化时间的增长而增加,C_(IS)谱变宽且产生来自C-O和C-Br结构的新谱线。红外光谱证明溴化反应产生CH_2Br结构。溴化使膜的气透性发生相应的变化,即α_(O_2/N_2)值增高,P_(O_2)值降低。

EASTMAN-AQ/NIII MODIFIED ELECTRODE CHARACTERIZATION AND APPLICATION IN FLOW-INJECTION DETERMINATION OF CARBOHYDRATES AND AMINO-ACIDS

A novel Eastman-AQ/Ni(II) chemically modified electrode (CME) produced by "double coating step" deposition of a poly(ester sulphonic acid) polymer film and Ni2+-containing crystalline species onto glassy carbon instead of a metallic nickel electrode exhibited stable electrocatalytic oxidation of numerous alpha-hydrogen compounds including carbohydrates, amines and amino acids. In cyclic voltammetry, the electrocatalysis appeared with an irreversible anodic wave at +0.55 V (vs. Ag/AgCl). The CME was adapted for constant-potential amperometric detection of these compounds in flow injection analysis. Using the CME, the linear response concentration range was between 1.0 x 10(-5) and 5.0 x 10(-2) mol/l and the detection limit was 5.0 x 10(-6) mol/l for glucose. The stability of the CME was adequate for routine quantitative application.

磁共振成像用造影剂的合成

总结并评论了造影剂的合成方法,还列表给出了造影剂的特性和应用。

聚合物材料断面粗糙度的定量表征方法

由于缺乏理论基础和必要的实验技术,过去人们只能从断面形态定性地区分脆性和韧性断裂。八十年代以来,Maudelbrot等认为金属材料的断面满足自相似原理,具有分形特征,用分维定量表征断面形貌。指出分维值越高,表面越粗糙。何谓分维?物体的维数,表示物体填充空间的能力。在欧氏几何学中,每个几何对象都具有整数维D,如果一个D维几何对象的每个独立方向都增加为原来的L倍,结果得到N个原来的对象。D、L和N三者间的关系为:L~D=N 则D=logN/logL 这样D有可能不再是整数,而是分数。因此,引入分维的概念。具有分维的几何对象称为分形。

配合物[Li(THF)_2]_2(μ—Cl)_4[(η~5—CH_3C_5H_4)Nd·THF]的合成及其晶体结构

环戊二烯基希土氯化物是一类合成希土有机配合物的重要前身。尽管在1980年前没能成功地合成含轻希土元素的这类配合物,但目前已发现,采用具有较大体积的取代环戊二烯做配体,如C_5Me_5H,C_5H_3〔Si(CH_3)_3〕_2H,C_5Me_4C_3H_7H和桥联的配体(C_5H_4)_2(CH_2)_3H_2都可得到相应的取代环戊二烯基轻希土氯化物。控制LnCl_3和CpNa的反应摩尔比也可以成功地得到这类轻希土的环戊二烯基氯化物。

端羟基丁腈橡胶增韧环氧树脂研究

本文研究了端羟基丁腈橡胶(HTBN)对环氧树脂的增韧作用。加入10—20phr的HTBN,环氧树脂性能可以大幅度提高,粘接碳钢剪切强度30MPa,冲击强度9×10~(-2)J/cm~2,浇注试样抗张强度61MPa,伸长10％,玻璃化温度115℃;不加HTBN的环氧树脂固化物,剪切强度24MPa,冲击强度34×10~(-2)J/cm~2,抗张强度30MPa,伸长5％,玻璃化温度124℃。 本文还通过DSC、SEM研究观察到增韧环氧树脂的两相结构。

Molecular cloning and characterization of proliferating cell nuclear antigen (PCNA) from Chinese shrimp Fenneropenaeus chinensis

The proliferating cell nuclear antigen gene was cloned from Fenneropenaeus chinensis (FcPCNA). The full-length cDNA sequence of FcPCNA encodes 260 amino acids showing high identity with PCNAs reported in other species. FcPCNA expressed especially high in proliferating tissues of shrimp such as haematopoietic tissue (HPT) and ovary. In order to understand the response of HPT to bacteria and virus challenge, mRNA level of FcPCNA in HPT was analyzed after shrimp were challenged by Vibrio anguillarum and white spot syndrome virus (WSSV). FcPCNA expression in HPT of shrimp was responsive to WSSV and Vibrio challenge, but different expression profiles were obtained after challenge by these two pathogens. The data provide additional information to understand the defense mechanisms of shrimp against virus and bacteria. (c) 2008 Elsevier Inc. All rights reserved.