969 resultados para 1800-tal.


Relevância:

20.00% 20.00%

Publicador:

Resumo:

IntroducciónEn éste, el cuarto de dieciseis volúmenes de la serie patrocianda por el Centro de Investigaciones Históricas de la Universidad de Costa Rica, Molina intenta al menos resumir los resultados de una gran variedad de investigaciones históricas recientes. El autor se destaca tanto por una prosa atractiva, como por un enfoque que no se reduce al esquema "café-capitalismo-sociedad" característico de anteriores estudios suyos. Es más, si hay una sorpresa agradable en esta obra, está en el evidente interés y desarrollo de los estudios de "mentalité", siguiendo tanto a los modelos franco-ingleses como lo poco hecho en el ámbito local... 

Relevância:

20.00% 20.00%

Publicador:

Resumo:

ResumenAnálisis de los móviles de 69 homicidios acaecidos en los cuatro principales distritos del cantón central de San José (Carmen, Catedral, Merced y Hospital) entre los años 1880 y 1921.AbstractA discussion of the motives of 69 murders in the four main districts of San Jose (Carmen, Catedral, Merced and Hospital) between 1880 and 1921.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A Baixada de Jacarepaguá é área da cidade do Rio de Janeiro de extensa planície circundada nas laterais por dois maciços (Tijuca e Pedra Branca) e que apresenta expressivo complexo lagunar. Na sua base localiza-se, ainda, uma faixa de praia do litoral atlântico. Ali se têm áreas úmidas, mangues, faixas de restinga e florestas.  Dos bairros que a compõem, Jacarepaguá tem urbanização consolidada, ao passo que a Barra da Tijuca e o Recreio dos Bandeirantes conjugam em sua urbanização dispersa grandes condomínios fechados, shopping centers, baixa provisão de infraestrutura e bolsões de pobreza. Vargem Grande, Vargem Pequena e Camorim, ainda que com baixíssima densidade, têm expressivo déficit infraestrutural, possuem muitas ocupações irregulares e sofrem ação de milicianos.  Diante de tais pressões urbanas, o trabalho visa a propor e discutir os critérios para se criar no sítio uma Área de Proteção Ambiental e Recuperação Urbana (APARU), modalidade presente na legislação urbanística carioca, levando-se em conta aspectos jurídico-políticos, sociais, geobiofísicos e arquitetônico-urbanísticos.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper traces the history of store (retailer-controlled) and national (manufacture controlled)brands; identifies the key historical characteristics of the past 200 years of marketing history;describes the four main time periods of U.S. retail marketing (1800 - 2000); and comments on the most likely developments within the current phases of brand marketing. Will the future focus on technology and new forms of communications? The Internet exemplifies an unconventional retailing environment, with etailer numbers growing rapidly. The central proposition of this paper is that a "cycle of control" - a pattern of marketing developments within the history of retailing and national marketing communications - Can indicate the success of marketing strategies in the future.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Maps have been published on the world wide web since its inception (Cartwright, 1999) and are still accessed and viewed by millions of users today (Peterson, 2003). While early webbased GIS products lacked a complete set of cartographic capabilities, the functionality within such systems has significantly increased over recent years. Functionalities once found only in desktop GIS products are now available in web-based GIS applications, for example, data entry, basic editing, and analysis. Applications based on web-GIS are becoming more widespread and the web-based GIS environment is replacing the traditional desktop GIS platforms in many organizations. Therefore, development of a new cartographic method for web-based GIS is vital. The broad aim of this project is to examine and discuss the challenges and opportunities of innovative cartography methods for web-based GIS platforms. The work introduces a recently developed cartographic methodology, which is based on a web-based GIS portal by the Survey of Israel (SOI). The work discusses the prospects and constraints of such methods in improving web-GIS interfaces and usability for the end user. The work also tables the preliminary findings of the initial implementation of the web-based GIS cartographic method within the portal of the Survey of Israel, as well as the applicability of those methods elsewhere.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Cold-formed steel members have been widely used in residential, industrial and commercial buildings as primary load bearing structural elements and non-load bearing structural elements (partitions) due to their advantages such as higher strength to weight ratio over the other structural materials such as hot-rolled steel, timber and concrete. Cold-formed steel members are often made from thin steel sheets and hence they are more susceptible to various buckling modes. Generally short columns are susceptible to local or distortional buckling while long columns to flexural or flexural-torsional buckling. Fire safety design of building structures is an essential requirement as fire events can cause loss of property and lives. Therefore it is essential to understand the fire performance of light gauge cold-formed steel structures under fire conditions. The buckling behaviour of cold-formed steel compression members under fire conditions is not well investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken at the Queensland University of Technology to investigate the buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. As the first phase of this research, a detailed review was undertaken on the mechanical properties of light gauge cold-formed steels at elevated temperatures and the most reliable predictive models for mechanical properties and stress-strain models based on detailed experimental investigations were identified. Their accuracy was verified experimentally by carrying out a series of tensile coupon tests at ambient and elevated temperatures. As the second phase of this research, local buckling behaviour was investigated based on the experimental and numerical investigations at ambient and elevated temperatures. First a series of 91 local buckling tests was carried out at ambient and elevated temperatures on lipped and unlipped channels made of G250-0.95, G550-0.95, G250-1.95 and G450-1.90 cold-formed steels. Suitable finite element models were then developed to simulate the experimental conditions. These models were converted to ideal finite element models to undertake detailed parametric study. Finally all the ultimate load capacity results for local buckling were compared with the available design methods based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Part 1.2 and the direct strength method (DSM), and suitable recommendations were made for the fire design of cold-formed steel compression members subject to local buckling. As the third phase of this research, flexural-torsional buckling behaviour was investigated experimentally and numerically. Two series of 39 flexural-torsional buckling tests were undertaken at ambient and elevated temperatures. The first series consisted 2800 mm long columns of G550-0.95, G250-1.95 and G450-1.90 cold-formed steel lipped channel columns while the second series contained 1800 mm long lipped channel columns of the same steel thickness and strength grades. All the experimental tests were simulated using a suitable finite element model, and the same model was used in a detailed parametric study following validation. Based on the comparison of results from the experimental and parametric studies with the available design methods, suitable design recommendations were made. This thesis presents a detailed description of the experimental and numerical studies undertaken on the mechanical properties and the local and flexural-torsional bucking behaviour of cold-formed steel compression member at ambient and elevated temperatures. It also describes the currently available ambient temperature design methods and their accuracy when used for fire design with appropriately reduced mechanical properties at elevated temperatures. Available fire design methods are also included and their accuracy in predicting the ultimate load capacity at elevated temperatures was investigated. This research has shown that the current ambient temperature design methods are capable of predicting the local and flexural-torsional buckling capacities of cold-formed steel compression members at elevated temperatures with the use of reduced mechanical properties. However, the elevated temperature design method in Eurocode 3 Part 1.2 is overly conservative and hence unsuitable, particularly in the case of flexural-torsional buckling at elevated temperatures.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The present paper examines whether the potential advantages of the expanding practice of web-based public participation only complement the benefits of the traditional techniques, or are empowering enough to replace them. The question is examined in a real-world case of neighbourhood revitalization, in which both techniques were practiced simultaneously. Comparisons are made at four major planning junctions, in order to study the contributions of each technique to the qualities of involvement, trust, and empowerment. The results show that web-based participants not only differ from the participants of traditional practices, but they also differ from each other on the basis of their type of web participation. The results indicate that web-based participation is an effective and affective complementary means of public participation, but it cannot replace the traditional unmediated techniques.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Excessive grazing pressure is detrimental to plant productivity and may lead to declines in soil organic matter. Soil organic matter is an important source of plant nutrients and can enhance soil aggregation, limit soil erosion, and can also increase cation exchange and water holding capacities, and is, therefore, a key regulator of grassland ecosystem processes. Changes in grassland management which reverse the process of declining productivity can potentially lead to increased soil C. Thus, rehabilitation of areas degraded by overgrazing can potentially sequester atmospheric C. We compiled data from the literature to evaluate the influence of grazing intensity on soil C. Based on data contained within these studies, we ascertained a positive linear relationship between potential C sequestration and mean annual precipitation which we extrapolated to estimate global C sequestration potential with rehabilitation of overgrazed grassland. The GLASOD and IGBP DISCover data sets were integrated to generate a map of overgrazed grassland area for each of four severity classes on each continent. Our regression model predicted losses of soil C with decreased grazing intensity in drier areas (precipitation less than 333 mm yr(-1)), but substantial sequestration in wetter areas. Most (93%) C sequestration potential occurred in areas with MAP less than 1800 mm. Universal rehabilitation of overgrazed grasslands can sequester approximately 45 Tg C yr(-1), most of which can be achieved simply by cessation of overgrazing and implementation of moderate grazing intensity. Institutional level investments by governments may be required to sequester additional C.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper explores the idea of virtual participation through the historical example of the republic of letters in early modern Europe (circa 1500-1800). By reflecting on the construction of virtuality in a historical context, and more specifically in a pre-digital environment, this paper calls attention to accusations of technological determinism in ongoing research concerning the affordances of the Internet and related media of communication. It argues that ‘the virtual’ is not synonymous with ‘the digital’ and suggests that, in order to articulate what is novel about modern technologies, we must first understand the social interactions underpinning the relationships which are facilitated through those technologies. By analysing the construction of virtuality in a pre-digital environment, this paper thus offers a baseline from which scholars might consider what is different about the modes of interaction and communication being engaged in via modern media.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Thomas Young (1773-1829) carried out major pioneering work in many different subjects. In 1800 he gave the Bakerian Lecture of the Royal Society on the topic of the “mechanism of the eye”: this was published in the following year (Young, 1801). Young used his own design of optometer to measure refraction and accommodation, and discovered his own astigmatism. He considered the different possible origins of accommodation and confirmed that it was due to change in shape of the lens rather than to change in shape of the cornea or an increase in axial length. However, the paper also dealt with many other aspects of visual and ophthalmic optics, such as biometric parameters, peripheral refraction, longitudinal chromatic aberration, depth-of-focus and instrument myopia. These aspects of the paper have previously received little attention. We now give detailed consideration to these and other less-familiar features of Young’s work and conclude that his studies remain relevant to many of the topics which currently engage visual scientists.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The last decade has seen an increase in research on the experience of immigrant nurses. There are two prevailing approaches in this body of work. One is a focus on the positive or negative aspects of the experience, and the other, a depiction of the experience as a linear movement from struggle to a comfortable state. Based on our study findings on the experience of China educated nurses working in Australia, this study proposes that the concept of ambivalence is more appropriate in portraying the experience of immigrant nurses. Several sources of ambivalence experienced by the participants are represented: a disparity between expectation and reality, conflicting social and cultural norms, the dual reference points of comparison, divergent interests within families, and a sense that although it is unsatisfactory, it is hard to go back. We argue that immigration generates various forms of ambivalence and immigrant nurses must live with more or less ambivalence. The notion of ambivalence can explain a range of behaviours and situations beyond the scope of rational-choice explanations. To date, ambivalence as a theoretical concept in understanding the experience of immigrant nurses has been either ignored or insufficiently addressed in the literature.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The artwork was created to respond to the exhibition theme, "DIGILOG+IN". It aimed to express the beauty when digital and analogue materials are combined. It visualised an organic harmony between digital and natural objects through digitalisation and builded a fantasy of digital world. However, there was a conceptual dilemma that a “digitalisation” of natural objects into a digital format should merely become a digital work. In other words, a harmony between digital and analogue (natural) can be only achieved through a digitalising process by removing intrinsic nature of analogues. Therefore, the substance of analogues no longer exists in a digitally visualised form, but is virtually represented. The title of art work “digitualisation” is a combined word with “digi-tal” and vir-tualisation”. It refers to a digitally virtualising the substance of natural objects. The artwork visualised the concept of digitualisation by using natural objects (flowers) that are merged within a virtual space (a building entrance foyer).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Background: Efforts to prevent the development of overweight and obesity have increasingly focused early in the life course as we recognise that both metabolic and behavioural patterns are often established within the first few years of life. Randomised controlled trials (RCTs) of interventions are even more powerful when, with forethought, they are synthesised into an individual patient data (IPD) prospective meta-analysis (PMA). An IPD PMA is a unique research design where several trials are identified for inclusion in an analysis before any of the individual trial results become known and the data are provided for each randomised patient. This methodology minimises the publication and selection bias often associated with a retrospective meta-analysis by allowing hypotheses, analysis methods and selection criteria to be specified a priori. Methods/Design: The Early Prevention of Obesity in CHildren (EPOCH) Collaboration was formed in 2009. The main objective of the EPOCH Collaboration is to determine if early intervention for childhood obesity impacts on body mass index (BMI) z scores at age 18-24 months. Additional research questions will focus on whether early intervention has an impact on children’s dietary quality, TV viewing time, duration of breastfeeding and parenting styles. This protocol includes the hypotheses, inclusion criteria and outcome measures to be used in the IPD PMA. The sample size of the combined dataset at final outcome assessment (approximately 1800 infants) will allow greater precision when exploring differences in the effect of early intervention with respect to pre-specified participant- and intervention-level characteristics. Discussion: Finalisation of the data collection procedures and analysis plans will be complete by the end of 2010. Data collection and analysis will occur during 2011-2012 and results should be available by 2013. Trial registration number: ACTRN12610000789066