The reform of the European Energy Tax Directive reform : effect on prices

[spa] Para hacer frente a los riesgos relacionados con la contaminación atmosférica, es ampliamente aceptada la necesidad de instrumentos de política encaminados a reducir las emisiones. La intervención tiene por objeto reducir las conductas contaminantes y incentivar una conducta más respetuosa y el uso de tecnologías más eficientes. La Unión Europea cuenta con dos importantes mecanismos económicos para el control de emisiones a escala europea: la directiva sobre los impuestos energéticos, un instrumento de fiscalidad ambiental aprobado en 2003 que afecta el precio de los productos energéticos, y el sistema de comercio de los derechos de emisiones, introducido en 2005, que afecta directamente a la cantidad de emisiones de CO2. En 2011, la Comisión Europea propuso una nueva versión de la directiva sobre los impuestos energéticos. El objetivo principal de la propuesta es aumentar la eficacia del instrumento a través de una mayor presión fiscal sobre los productos energéticos y de coordinar este instrumento de fiscalidad medioambiental con el sistema de comercio de los derechos de emisiones, para establecer una señal de precio de CO2 coherente para todos los sectores. Sin embargo, en mayo de 2012 el Parlamento Europeo bloqueó la propuesta de la nueva versión del impuesto, y el proceso de actualización se detuvo. La preocupación principal parecía ser el efecto de dicha propuesta en la competitividad, en particular para los sectores que serían los más afectados dado el uso intensivo de los productos energéticos, como el sector del transporte. El objetivo de este estudio es analizar el efecto que la reforma de la directiva sobre los impuestos energéticos podría tener sobre el nivel de precios, en particular en los países de la Unión Europea donde esta reforma implicaría un aumento de los impuestos energéticos. Utilizando datos del proyecto “World Input-Output Database”, la principal conclusión es que el nuevo sistema de impuestos energéticos tendría un impacto muy bajo sobre los precios. Por lo tanto, dado que los precios no serían fuertemente afectados por la reforma, no habrá inconvenientes para la competitividad y implicaciones en términos de distribución, pero, por otro lado, este resultado también implica una baja capacidad de esta reforma para provocar cambios en el consumo y la producción hacia menos presiones ambientales.

Correcting Interdevice Bias of Horizontal White-to-White and Sulcus-to-Sulcus Measures Used for Implantable Collamer Lens Sizing.

PURPOSE: To assess the agreement and repeatability of horizontal white-to-white (WTW) and horizontal sulcus-to-sulcus (STS) diameter measurements and use these data in combination with available literature to correct for interdevice bias in preoperative implantable collamer lens (ICL) size selection. DESIGN: Interinstrument reliability and bias assessment study. METHODS: A total of 107 eyes from 56 patients assessed for ICL implantation at our institution were included in the study. This was a consecutive series of all patients with suitable available data. The agreement and bias between WTW (measured with the Pentacam and BioGraph devices) and STS (measured with the HiScan device) were estimated. RESULTS: The mean spherical equivalent was -8.93 ± 5.69 diopters. The BioGraph measures of WTW were wider than those taken with the Pentacam (bias = 0.26 mm, P < .01), and both horizontal WTW measures were wider than the horizontal STS measures (bias >0.91 mm, P < .01). The repeatability (Sr) of STS measured with the HiScan was 0.39 mm, which was significantly reduced (Sr = 0.15 mm) when the average of 2 measures was used. Agreement between the horizontal WTW measures and horizontal STS estimates when bias was accounted for was г = 0.54 with the Pentacam and г = 0.64 with the BioGraph. CONCLUSIONS: Large interdevice bias was observed for WTW and STS measures. STS measures demonstrated poor repeatability, but the average of repeated measures significantly improved repeatability. In order to conform to the US Food and Drug Administration's accepted guidelines for ICL sizing, clinicians should be aware of and account for the inconsistencies between devices.

Improving and User Interface to E-Procurement Software Used in Asset Accounting and Investigating Effects to Efficiency

This diploma thesis has been done to international organization which takes care from the accounting actions of two major companies. In this organization are used three different purchasing tools which are used when new asset master data is wanted to input to SAP R/3- system. The aim of this thesis is to find out how much changing the user interface of one of these three e-procurement programs will affect to overall efficiency in asset accounting. As an addition will be introduced project framework which can be used in future projects and which help to avoid certain steps in the development process. At the moment data needs to be inputted manually with many useless mouse clicks and data needs to be searched from many various resources which slow down the process. Other organization has better tools at the moment than the myOrders system which is under investigation Research was started by exploring the main improvement areas. After this possible defects were traced. Suggested improvements were thought by exploring literature which has been written from usability design and research. Meanwhile also directional calculations from the benefits of the project were done alongside with the analysis of the possible risks and threats. After this NSN IT approved the changes which they thought was acceptable. The next step was to program them into tool and test them before releasing to production environment. The calculations were made also from implemented improvements and compared them to planned ones From whole project was made a framework which can be utilized also to other similar projects. The complete calculation was not possible because of time schedule of the project. Important observation in the project was that efficiency is not improved not only by changing the GUI but also improving processes without any programming. Feedback from end user should be also listened more in development process. End-user is after all the one who knows the best how the program should look like.

Venäläistä rulettia – Nuorten perhesuunnittelun esteet ja tarpeet Pietarissa ja Riiassa

Latviassa ja Venäjällä heikko demografinen tilanne on lisännyt keskustelua seksuaali- ja kansalaisoikeuksista sekä valtion merkityksestä niiden toteuttamisessa. Väestöpolitiikassa näkyy yhteiskunnallinen tilanne sekä sen kyky ja mahdollisuudet huomioida nuorten perhesuunnitteluun liittyviä tarpeita. Huomion kohteena on myös palvelujärjestelmä ja siinä toteutuva yksilöllinen taso. Tutkin perhesuunnittelua kokonaisvaltaisesti, mikä ilmenee erilaisten polkuriippuvuuksien tarkasteluina. Mielenkiintoiseksi kohteen tekee entisten sosialististen valtioiden erityislaatuisen murroksen läpikäyminen. Perhesuunnittelu on osa seksuaali- ja ihmisoikeuksia. Siihen kuuluu seksuaaliterveydestä tiedottaminen ja ohjaus sekä siihen liittyvät toimenpiteet. Perhesuunnittelu sisältää niin sosiaaliset, kasvatukselliset kuin lääketieteellisetkin näkökulmat. Siihen liitetään myös moraalisia ja taloudellisia näkemyksiä, sekä politiikkaa ja henkilökohtaisuutta. Tutkimustehtäväni on nuorten perhesuunnittelun esteet ja tarpeet Riiassa ja Pietarissa. Sovellan metodologisena lähestymistapana sosiaalihistoriallista ja etnografista tutkimusotetta, jolloin perinteen vaikutusten, kulttuuristen rakenteiden ja yksilöllisten toimintatapojen ymmärtäminen mahdollistuu. Aineisto koostuu viranomaishaastatteluista sosialismin kaudella toteutuneesta sekä nykyisestä perhesuunnittelusta ja nuorten haastatteluista Pietarissa ja Riiassa. Perehdyn myös lisääntymisterveyteen liittyviin sanomalehtiartikkeleihin sekä Latviassa että Venäjällä. Lisäksi havainnoin seksuaalineuvontatilanteita Pietarissa. Sekä sosialismin aikana että nykyään painottuvat väestönkasvun odotukset, joita tuetaan sukupuoli- ja moraalikasvatuksen avulla. Perhesuunnittelun esteiden analyysin tuloksissa on nähtävissä sosiaalisten olosuhteiden ja rakenteiden merkitys. Jälkisosialistisesta riskiyhteiskunnasta puuttuvat yhteiskuntaan integroitumisen mahdollistavat instituutiot. Tämä ilmenee yhteiskunnallisena vastuuttomuutena. Universaalit palvelut ovat suurelta osin peräisin sosialismin ajalta. Kaupalliset yritykset tekevät lähinnä teknisiä, yksittäisiä ehkäisyvälineisiin liittyviä interventioita nuorten elämään. Teini-ikäiset jätetään oman harkintansa varaan. Latviassa perhesuunnitteluun liittyvä ennalta ehkäisevä toiminta on huomioitu uudessa lisääntymisterveyslaissa, mutta sen heikko toteutus tuo sen lähelle neuvostoaikaista kulttuurikonventiota, jossa määrällisillä suoritteilla ja sekundaaripreventiolla on arvoa. Venäjällä voimavarat kohdentuvat jälkihuollon palveluihin. Foucaultin valta-analyysi kertoo strategiasta, jossa ihminen sisäistää vallankäytön osaksi omaa ajatteluaan ja toimintaansa. Tässä näkökulmassa yksilöllinen, yhteiskunnallinen ja historiallinen ulottuvuus limittyvät toisiinsa. Vallan muodot ovat yhteiskunnan rakenteissa. Väestöpolitiikan avulla tuotetaan tietoa ja muovataan hallitsemisen kohteita. Osa haastatelluista nuorista omaksui yhteiskunnan passiivisuuden osaksi omaa toimintaansa. He eivät tiedostaneet palvelujärjestelmän puutteita eivätkä kyseenalaistaneet sen oikeutusta. Myös lehtiartikkelit ja viranomaishaastattelut tukivat osittain seksuaalikasvatuksen sivuuttamista. Silloin hyväksyttävänä totuutena pidettiin väestöpolitiikkaa, jossa on annettu tilaa populistisille suuntauksille. Sekä Latviassa että Venäjällä ilmaistiin tavoitteita väestön kasvusta. Kansainvälisten seksuaalioikeuksien maihinnousu ei ole poistanut ääri uskonnollisten ja osittain kansalaisjärjestöjen puitteissa tapahtuvaa perhesuunnittelun vastustusta. Näissä suuntauksissa vaikutetaan ihmisten moraaliin ja vastustetaan yhteiskunnan interventioita kieltämällä seksuaalikasvatus. Sosialismin aikana sosiaali- ja terveydenhuoltoa toteutettiin totalitaristisessa, suljetussa yhteiskunnassa tiukasti rajatuilla voimavaroilla. Tuolta ajalta peräisin oleva viranomaisten yleinen medikalisoitunut ja tekninen lähestymistapa estää osittain nuoren valtaistumista. Vieläkin heikko tiedottaminen ja puutteellinen koulutus vaikuttavat ammattilaisten keskuudessa. Yksi haitallisista perhesuunnitteluun kuuluvista uskomuksista oli hormonaalisen ehkäisyn aiheuttamat ongelmat. Lisäksi pelättiin heikkotasoisesti tehtyjen aborttien aiheuttavan hedelmättömyyttä. Uskomukset ovat eläneet vieläkin, kun osa asiantuntijoista kannusti ensimmäisen raskauden päättymistä synnytykseen. Näillä käsityksillä on ollut taipumus siirtyä sukupolvelta toiselle myös kansalaisten keskuudessa. Sukuyhteisöjen ja verkostojen oleellinen merkitys teini-ikäisen arjessa ja selviytymisessä painotti perinteistä sosialisaatiota. Uskomusten lisäksi nuorten heikko taloudellinen tilanne on ohjannut heitä ehkäisyssä luonnonmenetelmien käyttöön. Neuvostoaikainen seksuaalikielteisyyden perinne on vaikuttanut myös sukupolvien kyvyttömyyteen keskustella aiheesta. Yleisen ennaltaehkäisevän neuvonnan puuttuminen on suunnannut suurta osaa nuoria mallioppimiseen, jossa esimerkit ovat nousseet satunnaisista löydöistä. Toisaalta työntekijöiden neuvokkuus ja aloitteellisuus erilaisissa ohjaamistilanteissa, toimintatavoissa ja instituutioiden perustamisissa kuvaavat eettistä vastuunottoa ja paneutumista nuorten perhesuunnittelun toteutumiseen sekä sen mahdollisuuksiin. Perhesuunnitteluun liittyvän tiedonsaannin parantamiseksi viranomaiset ovat aloittaneet nuorten vertaisryhmiä. Lisäksi yhtenä uutena virallisena lähestymistapana oli neuvostoaikana kielletty psykoterapeuttisen suuntauksen avoin käyttöönotto. Myös nuorille suunnattuja palveluja niin lainsäädännön kuin instituutioiden tasolla on saatu aikaan. Nämä myönteiset tapaukset jäivät kuitenkin yksittäisiksi, osittain joidenkin työntekijöiden omakohtaisen sitoutumisen varaan toimiviksi. Tutkimuksessa nousee esiin yhteiskunnan vastuu erityisesti haavoittuvien ryhmien kohdalla. Nuoret ovat tiedoiltaan ja kokemuksiltaan heikossa asemassa. Sosiaalipoliittisesta näkökulmasta julkisilla ja ennaltaehkäisevillä palveluilla on keskeinen merkitys etenkin niiden kohdalla, jotka tarvitsevat runsaasti palveluja. Usein tähän ryhmään kuuluvat ovat passiivisia tiedon hakijoita. Tutkimus tuo esille perhesuunnittelun palvelujärjestelmään ja sen kohderyhmään kuuluvan moniulotteisuuden, jossa toisiinsa nivoutuvat kulttuuriset myytit, uskomukset, tabut, toimintatavat ja tietämys. Näiden polkujen avaaminen tässä tutkimuksessa edistää perhesuunnittelun esteiden tunnistamista ja niihin soveltuvien ratkaisukeinojen löytymistä.

Determination of the influence of the variation of reducing and non-reducing sugars on coffee quality with use of artificial neural network

The present study aimed at evaluating the use of Artificial Neural Network to correlate the values resulting from chemical analyses of samples of coffee with the values of their sensory analyses. The coffee samples used were from the Coffea arabica L., cultivars Acaiá do Cerrado, Topázio, Acaiá 474-19 and Bourbon, collected in the southern region of the state of Minas Gerais. The chemical analyses were carried out for reducing and non-reducing sugars. The quality of the beverage was evaluated by sensory analysis. The Artificial Neural Network method used values from chemical analyses as input variables and values from sensory analysis as output values. The multiple linear regression of sensory analysis values, according to the values from chemical analyses, presented a determination coefficient of 0.3106, while the Artificial Neural Network achieved a level of 80.00% of success in the classification of values from the sensory analysis.

Identification and characterization of new genes and pathways regulating spermatogonial cell fate

Spermatogenesis, i.e sperm production in the seminiferous tubules of the testis, is a complex process that takes over one month to complete. Life-long ability of sperm production ultimately lies in a small population of undifferentiated cells, called spermatogonial stem cells (SSCs). These cells give rise to differentiating spermatogonia, which are committed to mature into spermatozoa. SSCs represent a heterogeneous population of cells and many aspects of their basic biology are still unknown. Understanding the mechanisms behind the cell fate decision of these cells is important to gain more insights into the causes of infertility and testis cancer. In addition, an interesting new aspect is the use of testis-derived stem cells in regenerative medicine. Our data demonstrated that adult mouse testis houses a population of Nanog-expressing spermatogonia. Based on mRNA and protein analysis these cells are enriched in stage XII of the mouse seminiferous epithelial cycle. The cells derived from this stage have the highest capacity to give rise to ES cell-like cells which express Oct4 and Nanog. These cells are under tight non- GDNF regulation but their fate can be dictated by activating p21 signalling. Comparative studies suggested that these cells are regulated like ES cells. Taken together these data imply that pluripotent cells are present in the adult mammalian testis. CIP2A (cancerous inhibitor of PP2A) has been associated with tumour aggressiveness and poor prognosis. In the testis it is expressed by the descendants of stem cells, i.e. the spermatogonial progenitor cells. Our data suggest that CIP2A acts upstream of PLZF and is needed for quantitatively normal spermatogenesis. Classification of CIP2A as a cancer/testis gene makes it an attractive target for cancer therapy. Study on the CIP2A deficient mouse model demonstrates that systemic inhibition of CIP2A does not severely interfere with growth and development or tissue or organ function, except for the spermatogenic output. These data demonstrate that CIP2A is required for quantitatively normal spermatogenesis. Hedgehog (Hh) signalling is involved in the development and maintenance of many different tissues and organs. According to our data, Hh signalling is active at many different levels during rat spermatogenesis: in spermatogonia, spermatocytes and late elongating spermatids. Localization of Suppressor of Fused (SuFu), the negative regulator of the pathway, specifically in early elongating spermatids suggests that Hh signalling needs to be shut down in these cells. Introduction of Hh signalling inhibitor resulted in an increase in germ cell apoptosis. Follicle-stimulating hormone (FSH) and inhibition of receptor tyrosine kinases resulted in down-regulation of Hh signalling. These data show that Hh signalling is under endocrine and paracrine control and it promotes germ cell survival.

MASTER DATA MANAGEMENT MATURITY AND TECHNOLOGY ASSESSMENT - From theory to practice, case Ineo Oy

After decades of mergers and acquisitions and successive technology trends such as CRM, ERP and DW, the data in enterprise systems is scattered and inconsistent. Global organizations face the challenge of addressing local uses of shared business entities, such as customer and material, and at the same time have a consistent, unique, and consolidate view of financial indicators. In addition, current enterprise systems do not accommodate the pace of organizational changes and immense efforts are required to maintain data. When it comes to systems integration, ERPs are considered “closed” and expensive. Data structures are complex and the “out-of-the-box” integration options offered are not based on industry standards. Therefore expensive and time-consuming projects are undertaken in order to have required data flowing according to business processes needs. Master Data Management (MDM) emerges as one discipline focused on ensuring long-term data consistency. Presented as a technology-enabled business discipline, it emphasizes business process and governance to model and maintain the data related to key business entities. There are immense technical and organizational challenges to accomplish the “single version of the truth” MDM mantra. Adding one central repository of master data might prove unfeasible in a few scenarios, thus an incremental approach is recommended, starting from areas most critically affected by data issues. This research aims at understanding the current literature on MDM and contrasting it with views from professionals. The data collected from interviews revealed details on the complexities of data structures and data management practices in global organizations, reinforcing the call for more in-depth research on organizational aspects of MDM. The most difficult piece of master data to manage is the “local” part, the attributes related to the sourcing and storing of materials in one particular warehouse in The Netherlands or a complex set of pricing rules for a subsidiary of a customer in Brazil. From a practical perspective, this research evaluates one MDM solution under development at a Finnish IT solution-provider. By means of applying an existing assessment method, the research attempts at providing the company with one possible tool to evaluate its product from a vendor-agnostics perspective.

Oxidation rates of carbon and nitrogen in char residues from solid fuels

Computational fluid dynamics (CFD) modeling is an important tool in designing new combustion systems. By using CFD modeling, entire combustion systems can be modeled and the emissions and the performance can be predicted. CFD modeling can also be used to develop new and better combustion systems from an economical and environmental point of view. In CFD modeling of solid fuel combustion, the combustible fuel is generally treated as single fuel particles. One of the limitations with the CFD modeling concerns the sub-models describing the combustion of single fuel particles. Available models in the scientific literature are in many cases not suitable as submodels for CFD modeling since they depend on a large number of input parameters and are computationally heavy. In this thesis CFD-applicable models are developed for the combustion of single fuel particles. The single particle models can be used to improve the combustion performance in various combustion devices or develop completely new technologies. The investigated fields are oxidation of carbon (C) and nitrogen (N) in char residues from solid fuels. Modeled char-C oxidation rates are compared to experimental oxidation rates for a large number of pulverized solid fuel chars under relevant combustion conditions. The experiments have been performed in an isothermal plug flow reactor operating at 1123-1673 K and 3-15 vol.% O2. In the single particle model, the char oxidation is based on apparent kinetics and depends on three fuel specific parameters: apparent pre-exponential factor, apparent activation energy, and apparent reaction order. The single particle model can be incorporated as a sub-model into a CFD code. The results show that the modeled char oxidation rates are in good agreement with experimental char oxidation rates up to around 70% of burnout. Moreover, the results show that the activation energy and the reaction order can be assumed to be constant for a large number of bituminous coal chars under conditions limited by the combined effects of chemical kinetics and pore diffusion. Based on this, a new model based on only one fuel specific parameter is developed (Paper III). The results also show that reaction orders of bituminous coal chars and anthracite chars differ under similar conditions (Paper I and Paper II); reaction orders of bituminous coal chars were found to be one, while reaction orders of anthracite chars were determined to be zero. This difference in reaction orders has not previously been observed in the literature and should be considered in future char oxidation models. One of the most frequently used comprehensive char oxidation models could not explain the difference in the reaction orders. In the thesis (Paper II), a modification to the model is suggested in order to explain the difference in reaction orders between anthracite chars and bituminous coal chars. Two single particle models are also developed for the NO formation and reduction during the oxidation of single biomass char particles. In the models the char-N is assumed to be oxidized to NO and the NO is partly reduced inside the particle. The first model (Paper IV) is based on the concentration gradients of NO inside and outside the particle and the second model is simplified to such an extent that it is based on apparent kinetics and can be incorporated as a sub-model into a CFD code (Paper V). Modeled NO release rates from both models were in good agreement with experimental measurements from a single particle reactor of quartz glass operating at 1173-1323 K and 3-19 vol.% O2. In the future, the models can be used to reduce NO emissions in new combustion systems.

Non-Linear Unsteady Aerodynamic Response Approximation Using Multi-Layer Functionals

Non-linear functional representation of the aerodynamic response provides a convenient mathematical model for motion-induced unsteady transonic aerodynamic loads response, that accounts for both complex non-linearities and time-history effects. A recent development, based on functional approximation theory, has established a novel functional form; namely, the multi-layer functional. For a large class of non-linear dynamic systems, such multi-layer functional representations can be realised via finite impulse response (FIR) neural networks. Identification of an appropriate FIR neural network model is facilitated by means of a supervised training process in which a limited sample of system input-output data sets is presented to the temporal neural network. The present work describes a procedure for the systematic identification of parameterised neural network models of motion-induced unsteady transonic aerodynamic loads response. The training process is based on a conventional genetic algorithm to optimise the network architecture, combined with a simplified random search algorithm to update weight and bias values. Application of the scheme to representative transonic aerodynamic loads response data for a bidimensional airfoil executing finite-amplitude motion in transonic flow is used to demonstrate the feasibility of the approach. The approach is shown to furnish a satisfactory generalisation property to different motion histories over a range of Mach numbers in the transonic regime.

On-site calibration of a phase fraction meter by an inverse technique

The formal calibration procedure of a phase fraction meter is based on registering the outputs resulting from imposed phase fractions at known flow regimes. This can be straightforwardly done in laboratory conditions, but is rarely the case in industrial conditions, and particularly for on-site applications. Thus, there is a clear need for less restrictive calibration methods regarding to the prior knowledge of the complete set of inlet conditions. A new procedure is proposed in this work for the on-site construction of the calibration curve from total flown mass values of the homogeneous dispersed phase. The solution is obtained by minimizing a convenient error functional, assembled with data from redundant tests to handle the intrinsic ill-conditioned nature of the problem. Numerical simulations performed for increasing error levels demonstrate that acceptable calibration curves can be reconstructed, even from total mass measured within a precision of up to 2%. Consequently, the method can readily be applied, especially in on-site calibration problems in which classical procedures fail due to the impossibility of having a strict control of all the input/output parameters.

Productivity and Services – Safety Telephone Services for the Elderly

Previous research on productivity is often associated with manufacturing or uses manufacturing definitions of productivity. Marketing research on services has not been satisfied with the manufacturing definitions. No universal definition for service productivity exists. The lack of a universal definition highlights the complexity entailed in the concept of productivity. The objective of this study was to investigate service productivity in situations, where traditional ways are in some cases even not possible or are not enough. In one definition of the productivity of service organisations there is the efficiency of the organisation on the input side and on the output side the customers’ perceived quality or value-in-use. To learn about value-in-use, many methods have been developed. A common practice is to make customer opinion surveys in the form of customer questionnaires and interviews. However, customers cannot always be asked directly, for example, because of impaired cognitive abilities. Such cases include the elderly and children. Furthermore, customer opinion surveys are time consuming. In addition, customers do not always know what kind of services they would benefit from. For the empirical part of the study, a business area was identified where traditional ways of measuring value-in-use are difficult or in some cases even not possible. This business area is safety telephone services. These services are most often used by the elderly. The way to define value-in-use here was to assess how well the services offered met customer expectations. Comparing the services customers asked for and the services provided to them indicated whether customer expectations were met. This study showed that customers had their ideas concerning the contents of the services but many times the services provided did not meet these expectations. Organisational efficiency aspirations can decrease customers’ value-in-use. This study found a solution, in which increasing organisational efficiency would go hand-in-hand with increasing customers’ value-in-use; the result being that the organisations’ needs and the service users’ expectations were in line. Value creation for customers produced organisational efficiency and thus increased productivity. In this study, customer expectations were observed by means of wellness technology. With the help of modern technology, customer expectations can be followed quickly and easily and customers can co-create with the organisation. This type of an approach could be useful even in the development of other services for other ages and in different contexts. If a service organisation decreases the number of personnel and, at the same time, tries to offer services to the same or a larger clientele, customers easily notice the change, which is often negative. To avoid harmful decrease in value-in-use, limitations to the aspiration of efficiency should be implemented – one of such is that the organisation is required to meet certain quality standards defined by experts. The aim is to secure that, as a result of efficiency aspirations in the organisation, the quality of the service offerings does not diminish below mutually agreed standards. Traditionally, when productivity in services has been estimated, organisational efficiency has not been combined with both customer expectations and an expert assessment of quality. This study contributes with novel thinking entitled ‘Relationship Management of the Elderly’. This study handles productivity, expert defined quality and value-in-use in an organisational context, which is practically untouched in previous research studies.

Power semiconductor nonlinearities in active du/dt output filtering

This doctoral thesis introduces an improved control principle for active du/dt output filtering in variable-speed AC drives, together with performance comparisons with previous filtering methods. The effects of power semiconductor nonlinearities on the output filtering performance are investigated. The nonlinearities include the timing deviation and the voltage pulse waveform distortion in the variable-speed AC drive output bridge. Active du/dt output filtering (ADUDT) is a method to mitigate motor overvoltages in variable-speed AC drives with long motor cables. It is a quite recent addition to the du/dt reduction methods available. This thesis improves on the existing control method for the filter, and concentrates on the lowvoltage (below 1 kV AC) two-level voltage-source inverter implementation of the method. The ADUDT uses narrow voltage pulses having a duration in the order of a microsecond from an IGBT (insulated gate bipolar transistor) inverter to control the output voltage of a tuned LC filter circuit. The filter output voltage has thus increased slope transition times at the rising and falling edges, with an opportunity of no overshoot. The effect of the longer slope transition times is a reduction in the du/dt of the voltage fed to the motor cable. Lower du/dt values result in a reduction in the overvoltage effects on the motor terminals. Compared with traditional output filtering methods to accomplish this task, the active du/dt filtering provides lower inductance values and a smaller physical size of the filter itself. The filter circuit weight can also be reduced. However, the power semiconductor nonlinearities skew the filter control pulse pattern, resulting in control deviation. This deviation introduces unwanted overshoot and resonance in the filter. The controlmethod proposed in this thesis is able to directly compensate for the dead time-induced zero-current clamping (ZCC) effect in the pulse pattern. It gives more flexibility to the pattern structure, which could help in the timing deviation compensation design. Previous studies have shown that when a motor load current flows in the filter circuit and the inverter, the phase leg blanking times distort the voltage pulse sequence fed to the filter input. These blanking times are caused by excessively large dead time values between the IGBT control pulses. Moreover, the various switching timing distortions, present in realworld electronics when operating with a microsecond timescale, bring additional skew to the control. Left uncompensated, this results in distortion of the filter input voltage and a filter self-induced overvoltage in the form of an overshoot. This overshoot adds to the voltage appearing at the motor terminals, thus increasing the transient voltage amplitude at the motor. This doctoral thesis investigates the magnitude of such timing deviation effects. If the motor load current is left uncompensated in the control, the filter output voltage can overshoot up to double the input voltage amplitude. IGBT nonlinearities were observed to cause a smaller overshoot, in the order of 30%. This thesis introduces an improved ADUDT control method that is able to compensate for phase leg blanking times, giving flexibility to the pulse pattern structure and dead times. The control method is still sensitive to timing deviations, and their effect is investigated. A simple approach of using a fixed delay compensation value was tried in the test setup measurements. The ADUDT method with the new control algorithm was found to work in an actual motor drive application. Judging by the simulation results, with the delay compensation, the method should ultimately enable an output voltage performance and a du/dt reduction that are free from residual overshoot effects. The proposed control algorithm is not strictly required for successful ADUDT operation: It is possible to precalculate the pulse patterns by iteration and then for instance store them into a look-up table inside the control electronics. Rather, the newly developed control method is a mathematical tool for solving the ADUDT control pulses. It does not contain the timing deviation compensation (from the logic-level command to the phase leg output voltage), and as such is not able to remove the timing deviation effects that cause error and overshoot in the filter. When the timing deviation compensation has to be tuned-in in the control pattern, the precalculated iteration method could prove simpler and equally good (or even better) compared with the mathematical solution with a separate timing compensation module. One of the key findings in this thesis is the conclusion that the correctness of the pulse pattern structure, in the sense of ZCC and predicted pulse timings, cannot be separated from the timing deviations. The usefulness of the correctly calculated pattern is reduced by the voltage edge timing errors. The doctoral thesis provides an introductory background chapter on variable-speed AC drives and the problem of motor overvoltages and takes a look at traditional solutions for overvoltage mitigation. Previous results related to the active du/dt filtering are discussed. The basic operation principle and design of the filter have been studied previously. The effect of load current in the filter and the basic idea of compensation have been presented in the past. However, there was no direct way of including the dead time in the control (except for solving the pulse pattern manually by iteration), and the magnitude of nonlinearity effects had not been investigated. The enhanced control principle with the dead time handling capability and a case study of the test setup timing deviations are the main contributions of this doctoral thesis. The simulation and experimental setup results show that the proposed control method can be used in an actual drive. Loss measurements and a comparison of active du/dt output filtering with traditional output filtering methods are also presented in the work. Two different ADUDT filter designs are included, with ferrite core and air core inductors. Other filters included in the tests were a passive du/dtfilter and a passive sine filter. The loss measurements incorporated a silicon carbide diode-equipped IGBT module, and the results show lower losses with these new device technologies. The new control principle was measured in a 43 A load current motor drive system and was able to bring the filter output peak voltage from 980 V (the previous control principle) down to 680 V in a 540 V average DC link voltage variable-speed drive. A 200 m motor cable was used, and the filter losses for the active du/dt methods were 111W–126 W versus 184 W for the passive du/dt. In terms of inverter and filter losses, the active du/dt filtering method had a 1.82-fold increase in losses compared with an all-passive traditional du/dt output filter. The filter mass with the active du/dt method was 17% (2.4 kg, air-core inductors) compared with 14 kg of the passive du/dt method filter. Silicon carbide freewheeling diodes were found to reduce the inverter losses in the active du/dt filtering by 18% compared with the same IGBT module with silicon diodes. For a 200 m cable length, the average peak voltage at the motor terminals was 1050 V with no filter, 960 V for the all-passive du/dt filter, and 700 V for the active du/dt filtering applying the new control principle.

B2SHARE – Storing and Sharing Research Data

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Supporting the creation, management, and long-term preservation of social science research data

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

JNK regulates dendrite and spine architecture in the central nervous system influencing spatial learning and motor tasks

JNK1 is a MAP-kinase that has proven a significant player in the central nervous system. It regulates brain development and the maintenance of dendrites and axons. Several novel phosphorylation targets of JNK1 were identified in a screen performed in the Coffey lab. These proteins were mainly involved in the regulation of neuronal cytoskeleton, influencing the dynamics and stability of microtubules and actin. These structural proteins form the dynamic backbone for the elaborate architecture of the dendritic tree of a neuron. The initiation and branching of the dendrites requires a dynamic interplay between the cytoskeletal building blocks. Both microtubules and actin are decorated by associated proteins which regulate their dynamics. The dendrite-specific, high molecular weight microtubule associated protein 2 (MAP2) is an abundant protein in the brain, the binding of which stabilizes microtubules and influences their bundling. Its expression in non-neuronal cells induces the formation of neurite-like processes from the cell body, and its function is highly regulated by phosphorylation. JNK1 was shown to phosphorylate the proline-rich domain of MAP2 in vivo in a previous study performed in the group. Here we verify three threonine residues (T1619, T1622 and T1625) as JNK1 targets, the phosphorylation of which increases the binding of MAP2 to microtubules. This binding stabilizes the microtubules and increases process formation in non-neuronal cells. Phosphorylation-site mutants were engineered in the lab. The non-phosphorylatable mutant of MAP2 (MAP2- T1619A, T1622A, T1625A) in these residues fails to bind microtubules, while the pseudo-phosphorylated form, MAP2- T1619D, T1622D, Thr1625D, efficiently binds and induces process formation even without the presence of active JNK1. Ectopic expression of the MAP2- T1619D, T1622D, Thr1625D in vivo in mouse brain led to a striking increase in the branching of cortical layer 2/3 (L2/3) pyramidal neurons, compared to MAP2-WT. The dendritic complexity defines the receptive field of a neuron and dictates the output to the postsynaptic cells. Previous studies in the group indicated altered dendrite architecture of the pyramidal neurons in the Jnk1-/- mouse motor cortex. Here, we used Lucifer Yellow loading and Sholl analysis of neurons in order to study the dendritic branching in more detail. We report a striking, opposing effect in the absence of Jnk1 in the cortical layers 2/3 and 5 of the primary motor cortex. The basal dendrites of pyramidal neurons close to the pial surface at L2/3 show a reduced complexity. In contrast, the L5 neurons, which receive massive input from the L2/3 neurons, show greatly increased branching. Another novel substrate identified for JNK1 was MARCKSL1, a protein that regulates actin dynamics. It is highly expressed in neurons, but also in various cancer tissues. Three phosphorylation target residues for JNK1 were identified, and it was demonstrated that their phosphorylation reduces actin turnover and retards migration of these cells. Actin is the main cytoskeletal component in dendritic spines, the site of most excitatory synapses in pyramidal neurons. The density and gross morphology of the Lucifer Yellow filled dendrites were characterized and we show reduced density and altered morphology of spines in the motor cortex and in the hippocampal area CA3. The dynamic dendritic spines are widely considered to function as the cellular correlate during learning. We used a Morris water maze to test spatial memory. Here, the wild-type mice outperformed the knock-out mice during the acquisition phase of the experiment indicating impaired special memory. The L5 pyramidal neurons of the motor cortex project to the spinal cord and regulate the movement of distinct muscle groups. Thus the altered dendrite morphology in the motor cortex was expected to have an effect on the input-output balance in the signaling from the cortex to the lower motor circuits. A battery of behavioral tests were conducted for the wild-type and Jnk1-/- mice, and the knock-outs performed poorly compared to wild-type mice in tests assessing balance and fine motor movements. This study expands our knowledge of JNK1 as an important regulator of the dendritic fields of neurons and their manifestations in behavior.