Three transducers for one photodetector: essays for optical communications

Dissertation presented to obtain the PhD degree in Electrical and Computer Engineering - Electronics

Risky behaviour and HIV/AIDS-related stigma in Zimbabwe

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Long-term behaviour of railway transitions under dynamic loading application to soft soil sites

Dissertação para obtenção do Grau de Doutor em Engenharia Civil

Analysis and treatment of a nineteenth century oil painting

This thesis focused on the study and treatment of a 19th century female portrait in oil from ECOMUSEU Municipal do Seixal, Portugal. The portrait, which depicts Isabel Maria Lourenço Affonso was in poor condition and a large strip of paint and canvas was missing (approximately 9cm by 66cm, almost 11% of the total surface area). The portrait is a companion piece to a male portrait (the relationship was established as part of this study), therefore a technical study of both paintings was considered essential to support the choices made during the treatment. The project involved three main areas: - The study of the history, condition, materials and techniques of both paintings. This allowed their comparison and understanding of their relationship; - The treatment of Isabel Maria Lourenço Affonso. The choices made and problems encountered are described. - The production of a replacement for the missing strip of paint and canvas. The practical solution developed to overcome such an unusual challenge is described along with the creative and flexible thinking required. Because not all traditional infill materials cope well on a mechanical level with thin layers over a very large surface (many are too brittle), strict criteria had to be employed to choose the appropriate material. The primary goal was to find a fill which would remain flexible and be capable of accepting surface texture, such that there would be a good visual match with the painting. Analysis and testing was carried out to evaluate the physical properties of the fill material chosen, BEVA® Gesso-P. The successful creation of the replacement strip has resulted in two publications and one presentation: Publication pending in The Picture Restorer, Leslie Carlyle, Raquel Marques, Isabel Pombo Cardoso and Sara Babo, “Creating a Textured Replacement Strip for the Missing Lower Portion of an Oil Portrait: Problem Solving and Practical Solutions”. Abstract accepted for presentation and publication, International Meeting on Retouching of Cultural Heritage (2RECH), Raquel Marques, Leslie Carlyle and Isabel Pombo Cardoso, “Textured Replacement Strip for a Missing Portion of a Portrait: Problem Solving and Practical Solutions”.

Characterization tests for insulation boards made from corn cob and natural glues

In recent years there has been a growing interest in developing news solutions for more ecologic and efficient construction, including natural, renewable and local materials, thus contributing in the search for more efficient, economic and environmentally friendly construction. Several authors have assessed the possibility of using various agricultural sub products or wastes, as part of the effort of the scientific community to find alternative and more ecologic construction materials. Corn cob is an agricultural waste from a very important worldwide crop. Natural glues are made from natural materials, non-mineral, that can be used as such or after some modifications to achieve the behaviour and performance required. Two examples of these natural glues are casein and wheat flour-based glues that were used in the present study. Boards with different compositions were manufactured, having as variables the type of glue, the dimension of the corn cob particles and the features of the pressing process. The tests boards were characterized with physical and mechanical tests, such as thermal conductivity (λ) with a ISOMET 2104 and 60 mm diameter contact probe, density (ρ) based on EN 1602:2013, surface hardness (SH) with a PCE Shore A durometer, surface resistance (SR) with a PROCEQ PT pendular sclerometer, bending behaviour (σ) based on EN 12089:2013, compression behaviour (σ10) based on EN 826:2013 and resilience (R) based on EN 1094-1:2008, with a Zwick Rowell bending equipment with 2 kN and 50 kN load cells (Fig. 1), dynamic modulus of elasticity (Ed) with a Zeus Resonance Meter equipment (Fig. 5) based on NP EN 14146:2006 and water vapour permeability (δ) based on EN 12086:2013. The various boards produced were characterized according to the tests and the ones with the best results were C8_c8 (casein glue, grain size 2,38-4,76 mm, cold pressing for 8 hours), C8_c4 (casein glue, grain size 2,38-4,76 mm, cold pressing for 4 hours), F8_h0.5 (wheat flour glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours), FEV8_h0.5 (wheat flour, egg white and vinegar glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours) and FEVH68_c4 (wheat flour, egg white, vinegar and 6 g of sodium hydroxide glue, grain size 2,38-4,76 mm, cold pressing for 4 hours). Taking into account the various boards produced and respective test results the type of glue and the pressure and pressing time are very important factors which strongly influence the final product. The results obtained confirmed the initial hypotheses that these boards have potential as a thermal and, eventually, acoustic insulation material, to use as coating or intermediate layer on walls, floors or false ceilings. This type of board has a high mechanical resistance when compared with traditional insulating materials.The integrity of these boards seems to be maintained even in higher humidity environments. However, due to biological susceptibility and sensitivity to water, they would be more adequate for application in dry interior conditions.

Application of superconducting bulks and stacks of tapes in electrical machines

The present dissertation focuses on the research of the recent approach of innovative high-temperature superconducting stacked tapes in electrical ma-chines applications, taking into account their potential benefits as an alternative for the massive superconducting bulks, mainly related with geometric and me-chanical flexibility. This work was developed in collaboration with Institut de Ciència de Ma-terials de Barcelona (ICMAB), and is related with evaluation of electrical and magnetic properties of the mentioned superconducting materials, namely: analysis of magnetization of a bulk sample through simulations carried out in the finite elements COMSOL software; measurement of superconducting tape resistivity at liquid nitrogen and room temperatures; and, finally, development and testing of a frequency controlled superconducting motor with rotor built by superconducting tapes. In the superconducting state, results showed a critical current density of 140.3 MA/m2 (or current of 51.15 A) on the tape and a 1 N∙m developed motor torque, independent from the rotor position angle, typical in hysteresis motors.

Introducing mapping standards in the quality assessment of buildings extracted from very high resolution satellite imagery

Many municipal activities require updated large-scale maps that include both topographic and thematic information. For this purpose, the efficient use of very high spatial resolution (VHR) satellite imagery suggests the development of approaches that enable a timely discrimination, counting and delineation of urban elements according to legal technical specifications and quality standards. Therefore, the nature of this data source and expanding range of applications calls for objective methods and quantitative metrics to assess the quality of the extracted information which go beyond traditional thematic accuracy alone. The present work concerns the development and testing of a new approach for using technical mapping standards in the quality assessment of buildings automatically extracted from VHR satellite imagery. Feature extraction software was employed to map buildings present in a pansharpened QuickBird image of Lisbon. Quality assessment was exhaustive and involved comparisons of extracted features against a reference data set, introducing cartographic constraints from scales 1:1000, 1:5000, and 1:10,000. The spatial data quality elements subject to evaluation were: thematic (attribute) accuracy, completeness, and geometric quality assessed based on planimetric deviation from the reference map. Tests were developed and metrics analyzed considering thresholds and standards for the large mapping scales most frequently used by municipalities. Results show that values for completeness varied with mapping scales and were only slightly superior for scale 1:10,000. Concerning the geometric quality, a large percentage of extracted features met the strict topographic standards of planimetric deviation for scale 1:10,000, while no buildings were compliant with the specification for scale 1:1000.

Análise configuracional dos grandes conjuntos urbanos na Região de Lisboa (1945-1974) : contributos da sintaxe espacial para a história de arte como história da cidade

A presente investigação debruça-se sobre o estudo dos grandes conjuntos urbanos, tendo como referência a área de Lisboa no período entre 1945 e 1974. O seu objetivo principal é compreender o padrão espacial e respetivas variantes destas formas urbanas relativamente recentes bem como avaliar o seu impato na estrutura global da cidade e da sociedade. Tomando como ponto de partida a história de arte como história da cidade, a tese toma como objeto o grande conjunto urbano e aponta a hipótese do estudo da relação forma-fundo como meio de obter informações relevantes que relacionem o uso e função com respeito ao desenho do espaço aberto. Como diferentes arranjos entre espaços abertos e fechados implicam tipos espaciais distintos (Medeiros 2013), o estudo da relação entre a forma (cheio) e o fundo (vazio) dos grandes conjuntos urbanos e respetivas variações, pode fornecer-nos informação espacial relevante, que nos permitem compreender melhor estas formas urbanas recentes. Usando a abordagem própria da teoria da sintaxe espacial (Hillier e Hanson 1984), do tipo configuracional, determinam-se as relações entre os vários elementos constituintes dos sistemas espaciais formados nestas urbanizações. Essas relações são depois analisadas através de medidas e variáveis topológicas que nos permitem identificar qualidades e valores espaciais para a sociedade. Os resultados obtidos a partir dessas variáveis e medidas permitem-nos, depois, avaliar os graus de ‘formalidade’ e ‘urbanidade’ em cada sistema (Holanda 2002). Consequentemente, a avaliação qualitativa das características espaciais que se pretendem obter nesta investigação, tem como base a avaliação quantitativa, permitindo assim comparar mais facilmente os diversos casos de estudo. De entre o conjunto de casos analisados, o estudo revela uma série de características comuns, que nos permitem identificar um padrão específico de urbanismo modernista que reflete claramente um conjunto de ideologias associadas a uma visão reformista da sociedade através do espaço. Mas por outro lado, existem também um conjunto de características particulares de cada caso, que reportam para a estrutura morfológica da cidade tradicional. No que reporta à hipótese de estudo levantada nesta investigação sobre a relação forma-fundo, verifica-se através da amostra que esta relação aparece invertida. Esta diferenciação deve-se ao abandono dos tradicionais sistemas de rua e de quarteirão, ainda presentes nas urbanizações de Alvalade e do Areeiro e a sua substituição pelo bloco livre em espaço aberto como nos casos de Alfragide, Portela e Olivais. Tal facto, como prova a teoria da Sintaxe Espacial ou Lógica Social do Espaço, traduziu-se necessariamente em diferentes modos de vida pública e privada e consequentemente de vida espacial e social. Assim concluímos, através da análise dos casos de estudo apresentados, que embora fazendo parte duma mesma ideologia urbana com características comuns (genótipo modernista), os mesmos apresentam resultados espaciais totalmente diferenciados o que justifica a dificuldade da sua análise comparativa.

Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique

The authors also acknowledge Centre for Textile Science and Technology (University of Minho) and FIBRENAMICS PLATFORMfor providing required conditions for this research. Sincere thanks are also due to Mr. Pedro Samuel Leite and Mr. Carlos Jesus for their kind help in sample preparation and testing.

A cross-sectional survey of attitudes to HIV risk and rapid HIV testing among clients of sex workers in Switzerland.

OBJECTIVES: To assess attitudes to HIV risk and acceptability of rapid HIV testing among clients of street-based female sex workers (FSW) in Lausanne, Switzerland, where HIV prevalence in the general population is 0.4%. METHODS: The authors conducted a cross-sectional study in the red light district of Lausanne for five nights in September of 2008, 2009 and 2010. Clients of FSW were invited to complete a questionnaire in the street assessing demographic characteristics, attitudes to HIV risk and HIV testing history. All clients interviewed were then offered anonymous finger stick rapid HIV testing in a van parked on-site. RESULTS: The authors interviewed 112, 127 and 79 clients in 2008, 2009 and 2010, respectively. All were men, average age 32-37 years old; 40-60% were in a stable relationship. History of unprotected sex was higher with non-commercial partners (33-50%) than with FSW (6-11%); 29-46% of clients had never undergone an HIV test. Anonymous rapid HIV testing was accepted by 45-50% of clients. Out of 109 HIV tests conducted during the three study periods, none was reactive. CONCLUSIONS: On-site HIV counselling and testing is acceptable among clients of FSW in this urban setting. These individuals represent an unquantified population, a proportion of which has an incomplete understanding of HIV risk in the face of high-risk behaviour, with implications for potential onward transmission to non-commercial sexual partners.

Mass spectrometry as a rapid and powerful alternative to antibodies for detecting LPXTG wall-associated proteins of Staphylococcus aureus

Functional characterization of transformed or natively present bacterial virulence proteins can be achieved employing various model systems. A prerequisite is to verify the correct expression of the transformed protein or the presence of the native protein in the microbe. Traditionally, antibodies are raised against the protein or a peptide thereof, followed by Western blot analysis or by fluorescence-activated cell sorting. Alternatively, the protein-coding gene can be fused with a downstream reporter gene, the expression of which reports the simultaneous expression of the upstream recombinant protein. Although being powerful, these methods are time consuming, especially when multiple proteins must be assessed. Here we describe a novel way to validate the expression of Gram-positive surface proteins covalently attached to the peptidoglycan. Eighteen out of the 21 known LPXTG-motif carrying cell wall-associated proteins of Staphylococcus aureus were cloned in Lactoccocus lactis either alone, in combinations or as truncated forms, and their correct expression was assessed by liquid chromatography coupled to mass spectrometry (LC-MS). The method is rapid, sensitive and precise. It can identify multiple proteins in transformed constructs without the time and cost needed for raising and testing multiple sets of antibodies.

Quantifying uncertainty: physicians' estimates of infection in critically ill neonates and children.

To determine the diagnostic accuracy of physicians' prior probability estimates of serious infection in critically ill neonates and children, we conducted a prospective cohort study in 2 intensive care units. Using available clinical, laboratory, and radiographic information, 27 physicians provided 2567 probability estimates for 347 patients (follow-up rate, 92%). The median probability estimate of infection increased from 0% (i.e., no antibiotic treatment or diagnostic work-up for sepsis), to 2% on the day preceding initiation of antibiotic therapy, to 20% at initiation of antibiotic treatment (P<.001). At initiation of treatment, predictions discriminated well between episodes subsequently classified as proven infection and episodes ultimately judged unlikely to be infection (area under the curve, 0.88). Physicians also showed a good ability to predict blood culture-positive sepsis (area under the curve, 0.77). Treatment and testing thresholds were derived from the provided predictions and treatment rates. Physicians' prognoses regarding the presence of serious infection were remarkably precise. Studies investigating the value of new tests for diagnosis of sepsis should establish that they add incremental value to physicians' judgment.

Ampliació i millora d'un vehicle teledirigit

En el projecte Ampliació i millora d’un vehicle teledirigit s’ha dut a terme l’ampliació d’un prototip de vehicle ràdio controlat fent servir dues plaques Arduino Duemilanove. Una es situa en el comandament i l’altra en el vehicle i controlen el comportament dels dos dispositius. Es transmet la informació necessària entre elles a través de dos mòduls XBee que posteriorment se’ls hi incorpora. Les plaques fetes servir en el prototip inicial eren unes SARD-13192 de Freescale i el primer que es fa en aquest sentit és una revisió del codi font utilitzat i l’adaptació a les plaques Arduino. Un acceleròmetre ADXL335 que s’incorpora a una de les plaques permet que el prototip es pugui controlar segons la posició del comandament. A més, un cop finalitzat el nou prototip és capaç de desplaçar-se endavant i endarrere, girar aturat i en moviment, i a diferents velocitats que es representen en tot moment en uns LEDs. També guarda l’últim circuit efectuat que es pot reproduir a voluntat de l’usuari, i emmagatzema les dades del recorregut de tota una sessió per exportar a l’ordinador. Per últim s’han dut a terme les proves necessàries per constatar que totes les millores s’han implementat amb èxit.

Schistosomiasis vaccine development: progress and prospects

The undisputed, worldwide success of chemotherapy notwithstanding, schistosomiasis continues to defy control efforts in as much rapid reinfection demands repeated treatment, sometimes as often as once a year. There is thus a need for a complementary tool with effect for the longer term, notably a vaccine. International efforts in this direction have been ongoing for several decades but, until the recombinant DNA techniques were introduced, antigen production remained an unsurmountable bottleneck. Although animal experiments have been highly productive and are still much needed, they probably do not reflect the human situation adequately and real progress can not be expected until more is known about human immune responses to schistosome infection. It is well-known that irradiated cercariae consistently produce high levels of protection in experimental animals but, for various reasons, this proof of principle cannot be directly exploited. Research has instead been focussed on the identification and testing of specific schistosome antigens. This work has been quite successful and is already at the stage where clinical trials are called for. Preliminary results from coordinated in vitro laboratory and field epidemiological studies regarding the protective potential of several antigens support the initiation of such trials. A series of meetings, organized earlier this year in Cairo, Egypt, reviewed recent progress, selecteded suitable vaccine candidates and made firm recommendations for future action including pledging support for large-scale production according to good manufacturing practice (GMP) and Phase I trials. Scientists at the American Centers for Disease Control and Prevention (CDC) have drawn up a detailed research plan. The major financial support will come from USAID, Cairo, which has established a scientific advisory group of Egyptian scientists and representatives from current and previous international donors such as WHO, NIAID, the European Union and the Edna McConnell Clark Foundation.

Antecedents of Job Satisfaction, Organizational Commitment and Stress in a Public Hospital: A P-E Fit Perspective

This article tests different P-E fit dimensions in order to assess their impact on three work outcomes: job satisfaction; organizational commitment; and stress perception. Findings shows that P-E fit dimensions have differentiated effects on its dependent variables. This study contributes to several important academic discussions. The first concerns the model tested, which contains several P-E fit dimensions. The second scientific contribution is to consider P-E fit dimensions as antecedents of three job outcomes. The third contribution concerns the development and testing of a new P-E fit dimension called "person-reforms" fit.