Molecular and functional analyses of Kunjin virus infectious cDNA clones demonstrate the essential roles for NS2A in virus assembly and for a nonconservative residue in NS3 in RNA replication

A number of full-length cDNA clones of Kunjin virus (KUN) were previously prepared; it was shown that two of them, pAKUN and FLSDX, differed in specific infectivities of corresponding in vitro transcribed RNAs by similar to100,000-fold (A. A. Khromykh et al., J. Virol. 72:7270-7279, 1998). In this study, we analyzed a possible genetic determinant(s) of the observed differences in infectivity initially by sequencing the entire cDNAs of both clones and comparing them with the published sequence of the parental KUN strain MRM61C. We found six common amino acid residues in both cDNA clones that were different from those in the published MRM61C sequence but were similar to those in the published sequences of other flaviviruses from the same subgroup. pAKUN clone had four additional codon changes, i.e., Ile59 to Asn and Arg175 to Lys in NS2A and Tyr518 to His and Ser557 to Pro in NS3. Three of these substitutions except the previously shown marker mutation, Arg175 to Lys in NS2A, reverted to the wild-type sequence in the virus eventually recovered from pAKUN RNA-transfected BHK cells, demonstrating the functional importance of these residues in viral replication and/or viral assembly. Exchange of corresponding DNA fragments between pAKUN and FLSDX clones and site-directed mutagenesis revealed that the Tyr518-to-His mutation in NS3 was responsible for an similar to5-fold decrease in specific infectivity of transcribed RNA, while the Ile59-to-Asn mutation in NS2A completely blocked virus production. Correction of the Asn59 in pAKUN NS2A to the wild-type lie residue resulted in complete restoration of RNA infectivity. Replication of KUN replicon RNA with an Ile59-to-Asn substitution in NS2A and with a Ser557-to-Pro substitution in NS3 was not affected, while the Tyr518-to-His substitution in NS3 led to severe inhibition of RNA replication. The impaired function of the mutated NS2A in production of infectious virus was complemented in trans by the helper wild-type NS2A produced from the KUN replicon RNA. However, replicon RNA with mutated NS2A could not be packaged in trans by the KUN structural proteins. The data demonstrated essential roles for the KUN nonstructural protein NS2A in virus assembly and for NS3 in RNA replication and identified specific single-amino-acid residues involved in these functions.

Variation of the crystalline structure of coal char during gasification

The variation of the crystallite structure of several coal chars during gasification in air and carbon dioxide was studied by high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) techniques. The XRD analysis of the partially gasified coal chars, based on two approaches, Scherrer's equation and Alexander and Sommer's method, shows a contradictory trend of the variation of the crystallite height with carbon conversion, despite giving a similar trend for the crystallite width change. The HRTEM fringe images of the partially gasified coal chars indicate that large and highly ordered crystallites exist at conversion levels as high as 86%. It is also demonstrated that the crystalline structure of chars can be very different although their pore structures are similar, suggesting a combination of crystalline structure analysis with pore structure analysis in studies of carbon gasification.

Variation of the pore structure of coal chars during gasification

The variation of the pore structure of several coal chars during gasification in air and carbon dioxide was studied by argon adsorption at 87 K and CO2 adsorption at 273 K. It is found that the surface area and volume of the small pores (10 Å for air gasification is constant over a wide range of conversion (>20%), while for CO2 gasification similar results are obtained using the total surface area. However, in the early stages of gasification (

Soybean growth and yield after single tillage and species mixture of cover plants

The use of cover crops is important for the agricultural crop and soil management in order to improve the system and, consequently, to increase yield. Therefore, the present study analyzed the effect of crop residues of black oat (Avena strigosa Schreb.) (BO) and a cocktail (CO) of BO, forage turnip (Raphanus sativus L.) (FT) and common vetch (Vicia sativa L.) (V) on the emergence speed index (ESI), seedling emergence speed (SES) plant height and soybean yield in different intervals between cover crop desiccation with glyphosate 480 (3 L ha-1) and BRS 232 cultivar sowing. Plots of 5 x 2.5 m with 1 m of border received four treatments with BO cover crops and four with CO as well as a control for each cover crop, at random, with five replications. The plots were desiccated in intervals of 1, 10, 20 and 30 days before soybean seeding. The harvest was manual while yield was adjusted to 13% of moisture content. The experimental design was completely randomized with splitplots and means compared by the Scott and Knott test at 5% of significance. The results showed that CO of cover crops can be recommended for soybean to obtain a more vigorous seedling emergence, from 10 days after cover crop desiccation.

Body composition, muscle strength, functional capacity, and physical disability risk in liver transplanted familial amyloidotic polyneuropathy patients

Abstract: Background: Familial amyloidotic polyneuropathy (FAP) is a neurodegenerative disease leading to sensory and motor polyneuropathies, and functional limitations. Liver transplantation is the only treatment for FAP, requiring medication that negatively affects bone and muscle metabolism. The aim of this study was to compare body composition, levels of specific strength, level of physical disability risk, and functional capacity of transplanted FAP patients (FAPTx) with a group of healthy individuals (CON). Methods: A group of patients with 48 FAPTx (28 men, 20 women) was compared with 24 CON individuals (14 men, 10 women). Body composition was assessed by dual-energy X-ray absorptiometry, and total skeletal muscle mass (TBSMM) and skeletal muscle index (SMI) were calculated. Handgrip strength was measured for both hands as was isometric strength of quadriceps. Muscle quality (MQ) was ascertained by the ratio of strength to muscle mass. Functional capacity was assessed by the six-minute walk test. Results: Patients with FAPTx had significantly lower functional capacity, weight, body mass index, total fat mass, TBSMM, SMI, lean mass, muscle strength, MQ, and bone mineral density. Conclusion: Patients with FAPTx appear to be at particularly high risk of functional disability, suggesting an important role for an early and appropriately designed rehabilitation program.

Comparison of body fat content and distribution of familial amyloidotic polyneuropathy patients versus healthy subjects

The deposition of amyloid fibers at the peripheral nervous system can induce motor neuropathy in Familial Amiloidotic Polyneuropethy (FAP) patients. This produces progressive reductions in functional capacity. The only treatment for FAP is a liver transplant, followed by aggressive medication that can affect patients' metabolism. To our knowledge, there are no data on body fat distribution or comparison between healthy and FAP subjects, which may be important for clinical assessment and management of this disease. PURPOSE: To analyze body fat content and distribution between FAP patients and healthy subjects. METHODS: Body fat content and distribution were measured through Double Energy X-ray Densitometry (DXA) in two groups. Group 1 consisted of 43 Familial Amyloidotic Polyneuropathy patients (19 males, 32 + 8 Yrs, and 24 females, 37 + 5 yrs), who had liver transplant less than 2 months before. Group 2 consisted of 18 healthy subjects of similar age (8 males, 36 + 7 yrs, and 10 females, 39 + 5 yrs). RESULTS: Healthy subjects showed higher values than FAP patients for: BMI (24,2+2,3kg/m2 vs 22,3+3,8 kg/m2 respectively, p<0,05), % trunk BF (26,21+8,34kg vs 20,78+9,05kg respectively, p<0,05), % visceral BF (24,43+7,97% vs 19,21+9,30% respectively, p<0,05), % abdominal BF (26,63+8,51% vs 20,63+10,35% respectively, p<0,05) abdominal subcutaneous BF (0,533+0,421kg vs 0,353+0,257kg respectively, p=0,05), abdominal BF/BF ratio (0,09+0,02 vs 0,08+0,02 respectively, p<0,05) and abdominal BF/trunk BF ratio (0,19+0,03 vs 0,17+0,03 respectively, p<0,05). CONCLUSIONS: These results showed that FAP patients soon after liver transplantation exhibited a healthier body fat profile compared to controls. However, fat content and distribution varied widely in FAP subjects, suggesting an individualized approach for assessment and intervention rather than general guidelines. Future research is needed to investigate the long term consequences on body fat following liver transplant in this population.

Comparison of body fat content and distribution of familial amyloidotic polyneuropathy patients versus healthy subjects

The deposition of amyloid fibers at the peripheral nervous system can induce motor neuropathy in Familial Amiloidotic Polyneuropethy (FAP) patients. This produces progressive reductions in functional capacity. The only treatment for FAP is a liver transplant, followed by aggressive medication that can affect patients' metabolism. To our knowledge, there are no data on body fat distribution or comparison between healthy and FAP subjects, which may be important for clinical assessment and management of this disease.

Effects of a randomized trial of exercise on body composition of liver transplanted patients

Liver transplantation is used as a only therapy so far, that stop the progression of some aspects of familial amyloidotic polyneuropathy disease (FAP) an autossomic neurodegenerative disease. FAP often results in severe functional limitations. Transplantation requires aggressive medication which impairs bone and muscle metabolism. Malnutrition plus weight loss is already one feature of FAP patients. All this may produce negative consequences on body composition. The effect of exercise training in FAP patients after a liver transplant (FAPTX) is currently unknown. The purpose of this study is to evaluate the effects of a six months exercise training program on body composition in FAPTX patients.

Associação entre idade, classe social e hábito de fumar maternos com peso ao nascer

Foi realizado inquérito em Ribeirão Preto, Brasil, de junho de 1978 a maio de 1979, que constou de entrevistas com mães de nascidos vivos hospitalares, de partos únicos, correspondendo a 98 % dos nascimentos ocorridos durante o período no Município. O maior percentual de nascimentos com baixo peso ocorreu entre as mães jovens, fumantes e pertencentes às classes trabalhadoras. O maior número de mães jovens foi encontrado também nessas classes. A prevalência do hábito de fumar foi maior nas mães jovens, porém houve pouca diferença na freqüência de mulheres fumantes entre as classes sociais, variando de 25 a 30%. Observou-se que o pencentual de baixo peso foi maior para as mães trabalhadoras não fumantes do que para as mães burguesas fumantes. O modelo logito foi ajustado aos dados para estudo da possível associação múltipla entre hábito de fumar, idade materna e classe social com o peso ao nascer. Os resultados indicaram que hábito de fumar materno, idade materna e classe social foram independentes no seu efeito sobre o peso ao nascer, não se observando interação. Esses achados sugerem que a maior prevalência de baixo peso entre mães não fumantes das classes trabalhadoras em relação às mães fumantes da burguesia provavelmente refletiu a concentração de outros fatores de risco entre as mulheres das classes trabalhadoras, tais como: baixa escolaridade, cuidado pré-natal inadequado, alta paridade, diferenças no comportamento reprodutivo.

Epidemiologia dos acidentes do trabalho fatais em área metropolitana da região sudeste do Brasil, 1979-1989

Foram localizados e analisados 476 prontuários de acidentes do trabalho fatais arquivados na Agência de Campinas do INSS, ocorridos nos Municípios de Campinas, Cosmópolis, Paulínia, Sumaré e Valinhos, Estado de São Paulo, Brasil, no período de 1979 a 1989. Mediante as informações contidas na Comunicação de Acidente de Trabalho (CAT), Boletim de Ocorrência (BO) e atestados de óbito, foram analisados os acidentes do trabalho segundo características das empresas, do acidentado e do acidente propriamente dito. Através dos dados disponíveis no Ministério do Trabalho/RAIS, sobre o número de trabalhadores registrados segundo ramo de atividade e ocupação dos municípios, estimou-se o risco de acidente de trabalho. A Densidade de Incidência foi maior para os "carpinteiros" (94,3 óbitos por 100.000 trabalhadores/ano), seguida dos "condutores de veículo" (69,6) e "pedreiros" (63,3). Comparada aos "técnicos", estes profissionais têm de três a cinco vezes mais probabilidade de morrer em função da atividade desempenhada (Razão de Densidade de Incidência). A Construção Civil (22,1%) e Transportes (14,9%), sendo os ramos de atividade que mais contribuíram na mortalidade dos acidentados, apresentaram elevada Densidade de Incidência, de 59,8 e 57,3 óbitos por 100.000 trabalhadores/ano, respectivamente, se comparada ao do Comércio Varejista (9,4).

Checklist cirúrgica: contributo para uma intervenção na área da segurança do doente

Mestrado em Intervenção Sócio-Organizacional na Saúde - Área de especuialização: Políticas de administração e gestão de serviços de saúde.

The impact of exercise training on liver transplanted familial amyloidotic polyneuropathy (FAP) patients

Liver transplantation is nowadays the only effective answer to adjourn the outcome of functional limitations associated with familial amyloidotic polyneuropathy (FAP), a neurodegenerative disease characterized by sensory and motor polyneuropathies. Nevertheless, there is a detrimental impact associated with the after-surgery period on the fragile physical condition of these patients. Exercise training has been proven to be effective on reconditioning patients after transplantation. However, the effects of exercise training in liver transplanted FAP patients have not been scrutinized yet.

Betão auto-compactável com agregados reciclados provenientes da pré-fabricação

A crescente necessidade de tornar a construção mais sustentável e o intuito de contribuir com soluções de reaproveitamento e de escoamento dos desperdícios produzidos na indústria da construção foram determinantes para o financiamento atribuído a um projeto de investigação, com o objetivo de avaliar a viabilidade da utilização de agregados reciclados de betão provenientes da indústria de pré-fabricação para a produção de betões autocompactáveis (BAC). Desta forma, não só se pode contribuir positivamente para a melhoria da qualidade final das peças produzidas pela indústria de pré-fabricação, dispensando a utilização de métodos de vibração falíveis, mas também se contribui para a sustentabilidade do meio ambiente, minimizando o consumo de recursos naturais e a deposição de aterros de resíduos. O projeto é subdividido em diversas fases de otimização e de análise. Numa fase inicial, serão produzidos e selecionados os betões de origem (BO), onde se incluem os materiais produzidos em laboratório e os materiais provenientes de estruturas pré-fabricadas, os quais darão origem aos agregados a analisar. Esses agregados reciclados (AR) sofrerão um processo de trituração orientado (trituração primária e trituração primária e secundária) que pode influenciar as características do próprio betão. Dos resultados obtidos, seleciona-se o método de trituração a adotar para as fases subsequentes. Estas consistirão na produção de betões convencionais e autocompactáveis, que reproduzam aproximadamente a mesma classe de resistência dos betões de origem, nomeadamente 20, 45, 65 e 80 MPa, variando a sua composição (rácio a/c, adições e superplastificantes) e as taxas de agregados reciclados finos (AFR) e grossos (AGR). As percentagens de substituição AFR/AGR a considerar serão: 0/25, 25/0, 25/25, 0/100, 100/0 e 100/100%. Posteriormente, será efetuada a otimização desses betões para classes de resistência mais elevadas, utilizando, para o efeito, agregados reciclados com resistências mecânicas correspondentes a uma classe inferior. Serão incluídos neste estudo os betões de elevado desempenho autocompactáveis, cuja resistência se pretende que seja igual ou superior a 80 MPa. Em todas as fases, serão executados ensaios de avaliação às características mecânicas e de durabilidade dos betões, incluindo a análise microestrutural para a observação da evolução da estrutura porosa da pasta e dos agregados reciclados e da interface pasta/agregados. Pretende-se obter como resultado final um betão com agregados reciclados com agregados reciclados, cujas propriedades sejam compatíveis ou superiores às de um betão auto-compactável com agregados naturais.

A stratigraphic framework for the Miocene from the lower Tagus Basin (Lisbon, Setúbal Península, Portugal) Depositional sequences, biostratigraphy and isotopic ages

Rev. Soc. Geol. España, 12(1), ano 1999

Mechanical properties of chemically modified portuguese pinewood

To turn wood into a construction material with enhanced properties, many methods of chemical modification have been developed in the last few decades. In this work, mechanical properties of pine wood were chemically modified, compared and evaluated. Maritime pine wood (Pinus pinaster) was modified with four chemical processes: 1,3-dimethylol-4,5- dihydroxyethyleneurea, N-methylol melamine formaldehyde, tetra-alkoxysilane and wax. The following mechanical properties were assessed experimentally: Modulus of elasticity measured statically, stiffness stabilization efficiency in different climates (30 and 87% of relative humidity), modulus of rupture, work maximum load, impact bending strength, compression, tensile and shear strength at indoor conditions (65% of relative humidity). In both types of active principle of modification, cell wall or lumen fill, no significant changes on the bending stiffness (modulus of elasticity) were found. In the remaining properties analysed significant changes in the modified wood-material took place compared to unmodified wood control: - Cell wall modification was the most effective method to achieve high stiffness stabilization efficiency (up to 60%) and also increased compression strength (up to 230%). However, modulus of rupture, tensile, shear and the impact bending strength were reduced by both resins, but in a varying extent, where the N-methylol melamine formaldehyde endured less reduction than 1,3-dimethylol-4,5-dihydroxyethyleneurea resin. In the latter, reduction up to 60% can take place. - In the lumen fill modification: tetra-alkoxysilane has no effect in the mechanical properties. Although, a slight increase in shear strength parallel to the grain was found. Wax specimens have shown a slight increase in bending strength, compression, tensile and shear strength as well as in the absorption energy capacity.