¿Y después del trabajo, qué? Más allá de la integración laboral de las personas con discapacidad = What happens after work? Going further than labour integration for disabled people

La actividad profesional es fundamental en la vida de cualquier persona y en el caso de las que padecen una discapacidad tiene una gran importancia para contribuir a configurar su identidad adulta. En este sentido, la finalidad del artículo es valorar la importancia del trabajo en los procesos de participación social y de calidad de vida de las personas con discapacidad. Por ello, en el artículo se pone de manifiesto la relación que se establece entre la dimensión laboral y la integración social de los individuos con discapacidad mediante el análisis de investigaciones desarrolladas en nuestro contexto, entre las que figuran diversos estudios realizados por nuestro grupo de investigación durante los últimos años. Con la voluntad de conocer con más detalle esta cuestión, se presenta una investigación reciente realizada por nuestro equipo. En ella desarrollamos un estudio de casos centrado en personas con discapacidad psíquica que han participado en experiencias de integración laboral en el mercado ordinario, con el objetivo de obtener información sobre la incidencia de la inserción laboral en diferentes dimensiones de la vida de los trabajadores con discapacidad. Los resultados nos permiten valorar que la experiencia genera cambios positivos, sobre todo a nivel personal (expectativas personales, potenciación del proyecto de vida, mejora de competencias…). Sin embargo, a pesar de que se aprecian mejoras en la dimensión social, el estudio plantea la necesidad de emprender acciones alternativas para potenciar la participación comunitaria de las personas implicadas en la investigación. El artículo concluye con algunas propuestas orientadas a mejorar los procesos de inserción social del colectivo

RFID Tags for Detecting Concrete Degradation in Bridge Decks, RB08-011, 2013

Steel reinforcing bar (rebar) corrosion due to chlorine ingress is the primary degradation mechanism for bridge decks. In areas where rock salt is used as a de-icing agent, salt water seeps into the concrete through cracks, causing corrosion of the rebar and potentially leading to catastrophic failure if not repaired. This project explores the use of radio frequency identification (RFID) tags as low-cost corrosion sensors. RFID tags, when embedded in concrete, will fail due to corrosion in the same manner as rebar after prolonged exposure to salt water. In addition, the presence of salt water interferes with the ability to detect the tags, providing a secondary mechanism by which this method can work. During this project, a fieldable RFID equipment setup was constructed and tested. In addition to a number of laboratory experiments to validate the underlying principles, RFID tags were embedded and tested in several actual bridge decks. Two major challenges were addressed in this project: issues associated with tags not functioning due to being in close proximity to rebar and issues associated with portland concrete coming in direct contact with the tags causing a detuning effect and preventing the tags from operating properly. Both issues were investigated thoroughly. The first issue was determined to be a problem only if the tags are placed in close proximity to rebar. The second issue was resolved by encapsulating the tag. Two materials, polyurethane spray foam and extruded polystyrene, were identified as providing good performance after testing, both in the lab and in the field.

Effects of three harvesting work methods on Harwarder productivity in final felling

Abstract

Who Cares? A comparison of informal and formal care provision in Spain, England and the USA

This paper investigates the prevalence of incapacity in performing daily activities and the associations between household composition and availability of family members and receipt of care among older adults with functioning problems in Spain, England and the United States of America (USA). We examine how living arrangements, marital status, child availability, limitations in functioning ability, age and gender affect the probability of receiving formal care and informal care from household members and from others in three countries with different family structures, living arrangements and policies supporting care of the incapacitated. Data sources include the 2006 Survey of Health, Ageing and Retirement in Europe for Spain, the third wave of the English Longitudinal Study of Ageing (2006), and the eighth wave of the USA Health and Retirement Study (2006). Logistic and multinomial logistic regressions are used to estimate the probability of receiving care and the sources of care among persons age 50 and older. The percentage of people with functional limitations receiving care is higher in Spain. More care comes from outside the household in the USA and England than in Spain. The use of formal care among the incapacitated is lowest in the USA and highest in Spain.

Effects of Road Construction Intensity and Operations on Rural Freeway Work Zone Capacity, TPF-5(081), 2014

Capacity is affected by construction type and its intensity on adjacent open traffic lanes. The effect on capacity is a function of vehicles moving in and out of the closed lanes of the work zone, and the presence of heavy construction vehicles. Construction activity and its intensity, however, are not commonly considered in estimating capacity of a highway lane. The main purpose of this project was to attempt to quantify the effects of construction type and intensity (e.g. maintenance, rehabilitation, reconstruction, and milling) on work zone capacity. The objective of this project is to quantify the effects of construction type and its intensity on work zone capacity and to develop guidelines for MoDOT to estimate the specific operation type and intensity that will improve the traffic flow by reducing the traffic flow and queue length commonly associated with work zones. Despite the effort put into field data collection, the data collected did not show a full speed-flow chart therefore extracting a reliable capacity value was difficult. A statistical comparison between the capacity values found in this study using either methodologies indicates that there is an effect of construction activity on the values work zone capacity. It was found that the heavy construction activity reduces the capacity. It is very beneficial to conduct similar studies on the capacity of work zone with different lane closure barriers, which is also directly related to the type of work zone being short-term or long-term work zones. Also, the effect of different geometric and environmental characteristics of the roadway should be considered in future studies.

Calibration of Highway Safety Manual Work Zone Crash Modification Factors, TPF-5(081), 2014

The Highway Safety Manual is the national safety manual that provides quantitative methods for analyzing highway safety. The HSM presents crash modification factors related to work zone characteristics such as work zone duration and length. These crash modification factors were based on high-impact work zones in California. Therefore there was a need to use work zone and safety data from the Midwest to calibrate these crash modification factors for use in the Midwest. Almost 11,000 Missouri freeway work zones were analyzed to derive a representative and stratified sample of 162 work zones. The 162 work zones was more than four times the number of work zones used in the HSM. This dataset was used for modeling and testing crash modification factors applicable to the Midwest. The dataset contained work zones ranging from 0.76 mile to 9.24 miles and with durations from 16 days to 590 days. A combined fatal/injury/non-injury model produced a R2 fit of 0.9079 and a prediction slope of 0.963. The resulting crash modification factors of 1.01 for duration and 0.58 for length were smaller than the values in the HSM. Two practical application examples illustrate the use of the crash modification factors for comparing alternate work zone setups.

Association of work related chronic stressors and psychiatric symptoms in a Swiss sample of police officers : a cross sectional questionnaire study

Purpose (1) To identify work related stressors that are associated with psychiatric symptoms in a Swiss sample of policemen and (2) to develop a model for identifying officers at risk for developing mental health problems. Method The study design is cross sectional. A total of 354 male police officers answered a questionnaire assessing a wide spectrum of work related stressors. Psychiatric symptoms were assessed using the "TST questionnaire" (Langner in J Health Hum Behav 4, 269-276, 1962). Logistic regression with backward procedure was used to identify a set of variables collectively associated with high scores for psychiatric symptoms. Results A total of 42 (11.9%) officers had a high score for psychiatric symptoms. Nearly all potential stressors considered were significantly associated (at P < 0.05) with a high score for psychiatric symptoms. A significant model including 6 independent variables was identified: lack of support from superior and organization OR = 3.58 (1.58-8.13), self perception of bad quality work OR = 2.99 (1.35-6.59), inadequate work schedule OR = 2.84 (1.22-6.62), high mental/intellectual demand OR = 2.56 (1.12-5.86), age (in decades) OR = 1.82 (1.21-2.73), and score for physical environment complaints OR = 1.30 (1.03-1.64). Conclusions Most of work stressors considered are associated with psychiatric symptoms. Prevention should target the most frequent stressors with high association to symptoms. Complaints of police officers about stressors should receive proper consideration by the management of public administration. Such complaints might be the expression of psychiatric caseness requiring medical assistance. Particular attention should be given to police officers complaining about many stressors identified in this study's multiple model. [Authors]

Issue review : university faculty work activities.

An examination of faculty work activities at the University of Iowa, UofI, Iowa State University, ISU, and University of Northern Iowa, UNI.

Work accident indemnity in Iowa, 1912

This paper on Work Accident Indemnity in Iowa, as well as the volume on the History of Work Accident Indemnity in Iowa, is the outgrowth of the author's, E. H. Downey, study of the History of Labor Legislation in Iowa, which was published by The State Historical Society of Iowa in the Iowa Economic History Series. Dealing with the vital subject of employers' liability and workmen's compensation, Professor Downey's paper will, it is thought, be found especially helpful to those interested in present day legislation. This paper was edited by Benjamen F. Shambaugh.

Apprendre ensemble pourtravailler ensemble: l'education interprofessionnelle, un mythe ou une réalité [Learning together to work together: interprofessional education, a myth or reality?].

This article offers a review of the literature on interprofessional education (EIP), a form of education which brings together members of two or more professions in a joint training. In this course, participants gain knowledge through other professionals and about them. The goal of EIP is to improve collaboration between health professionals and the quality of patient care. The EIP is booming worldwide and seems for from a mere fad. This expansion can be explained by several factors: the increasing importance attributed to the quality of care and patient safety, care changes (aging population and increasing chronic diseases) and the shortage of health professionals. The expectations of the EIP are large, while the evidence supporting its effectiveness is being built.