Restos óseos de Lobos marinos en la Cueva de Villaverde (Fuerteventura)

[EN] During the archaeological excavations carried out in the Villaverde Cave sorne bone remains (left mandible fragment, proximal fragment of scapula and two left humerus) of two specimes of monk seals (Monachus cf. monachus) were found. Toe cave, which is a vokanic tunnel, was occupied during the firts Centuries of our Era by the former inhabitants of the Fuerteventura Island. Toe monk seals,named in the past in Canaries "Lobos marinos", were very numerous according to the Chronicles of the Conquerers (1404-1408) and for that reason the small island situated between Lanzarote and Fuerteventura lslands was named '"Isla de Lobos". These seals became extinct at the end of the XV Century and the remains found at Villaverde are the only ones known.

Las pardelas pleistocenas de Hueso del Caballo

[EN] Osseous remains of numerous shearwaters and of eggshells of the only egg laid and often undamaged appear in the sand dunes of Jandía Península and more specifically in "Hueso del Caballo" which was one of their breeding si tes. Toe bones also visible in the sandy walls of a quarry were uncovered by the present aeolian erosion and are found in a layerwith Hymmenoptera nests and terrestrial mollusc shells in a dune dated by radiocarbon as being more than 30.000 years old. This fact proves there was a halt in the aeolian processes during a humid interval, probably related to the African aterían pluvial in Upper Pleistocene and a fixation of the dunes by vegetation.

Meccanismi di formazione dei tubi di lava

Two analytical models are proposed to describe two different mechanisms of lava tubes formation. A first model is introduced to describe the development of a solid crust in the central region of the channel, and the formation of a tube when crust widens until it reaches the leve\'es. The Newtonian assumption is considered and the steady state Navier- Stokes equation in a rectangular conduit is solved. A constant heat flux density assigned at the upper flow surface resumes the combined effects of two thermal processes: radiation and convection into the atmosphere. Advective terms are also included, by the introduction of velocity into the expression of temperature. Velocity is calculated as an average value over the channel width, so that lateral variations of temperature are neglected. As long as the upper flow surface cools, a solid layer develops, described as a plastic body, having a resistance to shear deformation. If the applied shear stress exceeds this resistance, crust breaks, otherwise, solid fragments present at the flow surface can weld together forming a continuous roof, as it happens in the sidewall flow regions. Variations of channel width, ground slope and effusion rate are analyzed, as parameters that strongly affect the shear stress values. Crust growing is favored when the channel widens, and tube formation is possible when the ground slope or the effusion rate reduce. A comparison of results is successfully made with data obtained from the analysis of pictures of actual flows. The second model describes the formation of a stable, well defined crust along both channel sides, their growing towards the center and their welding to form the tube roof. The fluid motion is described as in the model above. Thermal budget takes into account conduction into the atmosphere, and advection is included considering the velocity depending both on depth and channel width. The solidified crust has a non uniform thickness along the channel width. Stresses acting on the crust are calculated using the equations of the elastic thin plate, pinned at its ends. The model allows to calculate the distance where crust thickness is able to resist the drag of the underlying fluid and to sustain its weight by itself, and the level of the fluid can lower below the tube roof. Viscosity and thermal conductivity have been experimentally investigated through the use of a rotational viscosimeter. Analyzing samples coming from Mount Etna (2002) the following results have been obtained: the fluid is Newtonian and the thermal conductivity is constant in a range of temperature above the liquidus. For lower temperature, the fluid becomes non homogeneous, and the used experimental techniques are not able to detect any properties, because measurements are not reproducible.

Vibration as a method for muscular stimulation

Human reactions to vibration have been extensively investigated in the past. Vibration, as well as whole-body vibration (WBV), has been commonly considered as an occupational hazard for its detrimental effects on human condition and comfort. Although long term exposure to vibrations may produce undesirable side-effects, a great part of the literature is dedicated to the positive effects of WBV when used as method for muscular stimulation and as an exercise intervention. Whole body vibration training (WBVT) aims to mechanically activate muscles by eliciting neuromuscular activity (muscle reflexes) via the use of vibrations delivered to the whole body. The most mentioned mechanism to explain the neuromuscular outcomes of vibration is the elicited neuromuscular activation. Local tendon vibrations induce activity of the muscle spindle Ia fibers, mediated by monosynaptic and polysynaptic pathways: a reflex muscle contraction known as the Tonic Vibration Reflex (TVR) arises in response to such vibratory stimulus. In WBVT mechanical vibrations, in a range from 10 to 80 Hz and peak to peak displacements from 1 to 10 mm, are usually transmitted to the patient body by the use of oscillating platforms. Vibrations are then transferred from the platform to a specific muscle group through the subject body. To customize WBV treatments, surface electromyography (SEMG) signals are often used to reveal the best stimulation frequency for each subject. Use of SEMG concise parameters, such as root mean square values of the recordings, is also a common practice; frequently a preliminary session can take place in order to discover the more appropriate stimulation frequency. Soft tissues act as wobbling masses vibrating in a damped manner in response to mechanical excitation; Muscle Tuning hypothesis suggest that neuromuscular system works to damp the soft tissue oscillation that occurs in response to vibrations; muscles alters their activity to dampen the vibrations, preventing any resonance phenomenon. Muscle response to vibration is however a complex phenomenon as it depends on different parameters, like muscle-tension, muscle or segment-stiffness, amplitude and frequency of the mechanical vibration. Additionally, while in the TVR study the applied vibratory stimulus and the muscle conditions are completely characterised (a known vibration source is applied directly to a stretched/shortened muscle or tendon), in WBV study only the stimulus applied to a distal part of the body is known. Moreover, mechanical response changes in relation to the posture. The transmissibility of vibratory stimulus along the body segment strongly depends on the position held by the subject. The aim of this work was the investigation on the effects that the use of vibrations, in particular the effects of whole body vibrations, may have on muscular activity. A new approach to discover the more appropriate stimulus frequency, by the use of accelerometers, was also explored. Different subjects, not affected by any known neurological or musculoskeletal disorders, were voluntarily involved in the study and gave their informed, written consent to participate. The device used to deliver vibration to the subjects was a vibrating platform. Vibrations impressed by the platform were exclusively vertical; platform displacement was sinusoidal with an intensity (peak-to-peak displacement) set to 1.2 mm and with a frequency ranging from 10 to 80 Hz. All the subjects familiarized with the device and the proper positioning. Two different posture were explored in this study: position 1 - hack squat; position 2 - subject standing on toes with heels raised. SEMG signals from the Rectus Femoris (RF), Vastus Lateralis (VL) and Vastus medialis (VM) were recorded. SEMG signals were amplified using a multi-channel, isolated biomedical signal amplifier The gain was set to 1000 V/V and a band pass filter (-3dB frequency 10 - 500 Hz) was applied; no notch filters were used to suppress line interference. Tiny and lightweight (less than 10 g) three-axial MEMS accelerometers (Freescale semiconductors) were used to measure accelerations of onto patient’s skin, at EMG electrodes level. Accelerations signals provided information related to individuals’ RF, Biceps Femoris (BF) and Gastrocnemius Lateralis (GL) muscle belly oscillation; they were pre-processed in order to exclude influence of gravity. As demonstrated by our results, vibrations generate peculiar, not negligible motion artifact on skin electrodes. Artifact amplitude is generally unpredictable; it appeared in all the quadriceps muscles analysed, but in different amounts. Artifact harmonics extend throughout the EMG spectrum, making classic high-pass filters ineffective; however, their contribution was easy to filter out from the raw EMG signal with a series of sharp notch filters centred at the vibration frequency and its superior harmonics (1.5 Hz wide). However, use of these simple filters prevents the revelation of EMG power potential variation in the mentioned filtered bands. Moreover our experience suggests that the possibility of reducing motion artefact, by using particular electrodes and by accurately preparing the subject’s skin, is not easily viable; even though some small improvements were obtained, it was not possible to substantially decrease the artifact. Anyway, getting rid of those artifacts lead to some true EMG signal loss. Nevertheless, our preliminary results suggest that the use of notch filters at vibration frequency and its harmonics is suitable for motion artifacts filtering. In RF SEMG recordings during vibratory stimulation only a little EMG power increment should be contained in the mentioned filtered bands due to synchronous electromyographic activity of the muscle. Moreover, it is better to remove the artifact that, in our experience, was found to be more than 40% of the total signal power. In summary, many variables have to be taken into account: in addition to amplitude, frequency and duration of vibration treatment, other fundamental variables were found to be subject anatomy, individual physiological condition and subject’s positioning on the platform. Studies on WBV treatments that include surface EMG analysis to asses muscular activity during vibratory stimulation should take into account the presence of motion artifacts. Appropriate filtering of artifacts, to reveal the actual effect on muscle contraction elicited by vibration stimulus, is mandatory. However as a result of our preliminary study, a simple multi-band notch filtering may help to reduce randomness of the results. Muscle tuning hypothesis seemed to be confirmed. Our results suggested that the effects of WBV are linked to the actual muscle motion (displacement). The greater was the muscle belly displacement the higher was found the muscle activity. The maximum muscle activity has been found in correspondence with the local mechanical resonance, suggesting a more effective stimulation at the specific system resonance frequency. Holding the hypothesis that muscle activation is proportional to muscle displacement, treatment optimization could be obtained by simply monitoring local acceleration (resonance). However, our study revealed some short term effects of vibratory stimulus; prolonged studies should be assembled in order to consider the long term effectiveness of these results. Since local stimulus depends on the kinematic chain involved, WBV muscle stimulation has to take into account the transmissibility of the stimulus along the body segment in order to ensure that vibratory stimulation effectively reaches the target muscle. Combination of local resonance and muscle response should also be further investigated to prevent hazards to individuals undergoing WBV treatments.

The role of interleuchin 6 (IL-6) in the promotion of an aggressive and stem cell-like phenotype in human breast cancer cells and in stem/progenitor cells expanded in vitro as mammospheres

High serum levels of Interleukin-6 (IL-6) correlate with poor outcome in breast cancer patients. However no data are available on the relationship between IL-6 and stem/progenitor cells which may fuel the genesis of breast cancer in vivo. Herein, we address this issue in mammospheres (MS), multi-cellular structures enriched in stem/progenitor cells of the mammary gland, and also in MCF-7 breast cancer cells. We show that MS from node invasive breast carcinoma tissues express IL-6 mRNA at higher levels than MS from matched non-neoplastic mammary glands. We find that IL-6 mRNA is detectable only in basal-like breast carcinoma tissues, an aggressive variant showing stem cell features. Our results reveal that IL-6 triggers a Notch-3-dependent up-regulation of the Notch ligand Jagged-1, whose interaction with Notch-3 promotes the growth of MS and MCF-7 derived spheroids. Moreover, IL-6 induces a Notch-3-dependent up-regulation of the carbonic anhydrase IX gene, which promotes a hypoxia-resistant/invasive phenotype in MCF-7 cells and MS. Finally, an autocrine IL-6 loop relies upon Notch-3 activity to sustain the aggressive features of MCF-7-derived hypoxia-selected cells. In conclusion, our data support the hypothesis that IL-6 induces malignant features in Notch-3 expressing, stem/progenitor cells from human ductal breast carcinoma and normal mammary gland.

Investigations on formation and specification of neural precursor cells in the central nervous system of the Drosophila melanogaster embryo

Investigations on formation and specification of neural precursor cells in the central nervous system of the Drosophila melanogaster embryoSpecification of a unique cell fate during development of a multicellular organism often is a function of its position. The Drosophila central nervous system (CNS) provides an ideal system to dissect signalling events during development that lead to cell specific patterns. Different cell types in the CNS are formed from a relatively few precursor cells, the neuroblasts (NBs), which delaminate from the neurogenic region of the ectoderm. The delamination occurs in five waves, S1-S5, finally leading to a subepidermal layer consisting of about 30 NBs, each with a unique identity, arranged in a stereotyped spatial pattern in each hemisegment. This information depends on several factors such as the concentrations of various morphogens, cell-cell interactions and long range signals present at the position and time of its birth. The early NBs, delaminating during S1 and S2, form an orthogonal array of four rows (2/3,4,5,6/7) and three columns (medial, intermediate, and lateral) . However, the three column and four row-arrangement pattern is only transitory during early stages of neurogenesis which is obscured by late emerging (S3-S5) neuroblasts (Doe and Goodman, 1985; Goodman and Doe, 1993). Therefore the aim of my study has been to identify novel genes which play a role in the formation or specification of late delaminating NBs.In this study the gene anterior open or yan was picked up in a genetic screen to identity novel and yet unidentified genes in the process of late neuroblast formation and specification. I have shown that the gene yan is responsible for maintaining the cells of the neuroectoderm in an undifferentiated state by interfering with the Notch signalling mechanism. Secondly, I have studied the function and interactions of segment polarity genes within a certain neuroectodermal region, namely the engrailed (en) expressing domain, with regard to the fate specification of a set of late neuroblasts, namely NB 6-4 and NB 7-3. I have dissected the regulatory interaction of the segment polarity genes wingless (wg), hedgehog (hh) and engrailed (en) as they maintain each other’s expression to show that En is a prerequisite for neurogenesis and show that the interplay of the segmentation genes naked (nkd) and gooseberry (gsb), both of which are targets of wingless (wg) activity, leads to differential commitment of NB 7-3 and NB 6-4 cell fate. I have shown that in the absence of either nkd or gsb one NB fate is replaced by the other. However, the temporal sequence of delamination is maintained, suggesting that formation and specification of these two NBs are under independent control.

Vascular wall stem cells. Selection and conditioning of progenitors useful for cell therapy. A pathological case study

The arterial wall contains MSCs with mesengenic and angiogenic abilities. These multipotent precursors have been isolated from variously-sized human adult segments, belying the notion that vessel wall is a relatively quiescent tissue. Recently, our group identified in normal human arteries a vasculogenic niche and subsequently isolated and characterized resident MSCs (VW-MSCs) with angiogenic ability and multilineage potential. To prove that VW-MSCs are involved in normal and pathological vascular remodeling, we used a long-term organ culture system; this method was of critical importance to follow spontaneous 3-D vascular remodeling without any influence of blood cells. Next we tried to identify and localize in situ the VW-MSCs and to understand their role in the vascular remodeling in failed arterial homografts. Subsequently, we isolated this cell population and tested in vitro their multilineage differentiation potential through immunohistochemical, immunofluorescence, RT-PCR and ultrastructural analysis. From 25-30cm2 of each vascular wall homograft sample, we isolated a cell population with MSCs properties; these cells expressed MSC lineage molecules (CD90, CD44, CD105, CD29, CD73), stemness (Notch-1, Oct-4, Sca-1, Stro-1) and pericyte markers (NG2) whilst were negative for hematopoietic and endothelial markers (CD34, CD133, CD45, KDR, CD146, CD31 and vWF). MSCs derived from failed homografts (H-MSCs) exhibited adipogenic, osteogenic and chondrogenic potential but scarce propensity to angiogenic and leiomyogenic differentiation. The present study demonstrates that failed homografts contain MSCs with morphological, phenotypic and functional MSCs properties; H-MSCs are long-lived in culture, highly proliferating and endowed with prompt ability to differentiate into adipocytes, osteocytes and chondrocytes; compared with VW-MSCs from normal arteries, H-MSCs show a failure in angiogenic and leiomyogenic differentiation. A switch in MSCs plasticity could be the basis of pathological remodeling and contribute to aneurysmal failure of arterial homografts. The study of VW-MSCs in a pathological setting indicate that additional mechanisms are involved in vascular diseases; their knowledge will be useful for opening new therapeutic options in cardiovascular diseases.

Sicurezza di rete, analisi del traffico e monitoraggio.

Il lavoro è stato suddiviso in tre macro-aree. Una prima riguardante un'analisi teorica di come funzionano le intrusioni, di quali software vengono utilizzati per compierle, e di come proteggersi (usando i dispositivi che in termine generico si possono riconoscere come i firewall). Una seconda macro-area che analizza un'intrusione avvenuta dall'esterno verso dei server sensibili di una rete LAN. Questa analisi viene condotta sui file catturati dalle due interfacce di rete configurate in modalità promiscua su una sonda presente nella LAN. Le interfacce sono due per potersi interfacciare a due segmenti di LAN aventi due maschere di sotto-rete differenti. L'attacco viene analizzato mediante vari software. Si può infatti definire una terza parte del lavoro, la parte dove vengono analizzati i file catturati dalle due interfacce con i software che prima si occupano di analizzare i dati di contenuto completo, come Wireshark, poi dei software che si occupano di analizzare i dati di sessione che sono stati trattati con Argus, e infine i dati di tipo statistico che sono stati trattati con Ntop. Il penultimo capitolo, quello prima delle conclusioni, invece tratta l'installazione di Nagios, e la sua configurazione per il monitoraggio attraverso plugin dello spazio di disco rimanente su una macchina agent remota, e sui servizi MySql e DNS. Ovviamente Nagios può essere configurato per monitorare ogni tipo di servizio offerto sulla rete.

Historisches Grabenreißen im Wassereinzugsgebiet der Aar zwischen Wiesbaden und Limburg

Im Wassereinzugsgebiet der Aar zwischen Taunuskamm und Limburger Becken wurden 242 Erosionsschluchten, so genannte Runsen kartiert. Die vorgefundenen geomorphologischen Formen sind zum Teil mehr als 15 Meter tief, kerben- oder kastenförmig. Einige führen ein zeitweise oder ständig fließendes Gerinne. Die Untersuchung acht verschiedener Einzelbeispiele mit geomorphologischen, bodenkundlichen und kulturhistorischen Methoden ergab, dass die Erosionsschluchten in geschichtlicher Zeit entstanden sind. Damit wurden die Ergebnisse von BORK 1988, 1985, BORK et al. 1998, BAUER 1995, 1993, SEMMEL 1963, HEMPEL 1954, 1954 und HARD 1970 weitgehend bestätigt. Die Runsen an der Aar und ihrer Nebenbäche sind das Ergebnis exzessiver Erosionsprozesse, die in Folge einer erheblichen Übernutzung der Landschaft durch Köhlerei, Eisenerzverhüttung und Landwirtschaft hauptsächlich im 17. und 18. Jahrhundert ausgelöst wurden. Dabei kommt der seit 1656 betriebenen Michelbacher Hütte als landesherrliches Eisenwerk eine besondere Rolle zu. Ein weiterer Einfluss geht auf die spezifische Geofaktorenkonstellation im Untertaunus zurück. Die dort verbreiteten stark tonig verwitterten Schiefer und erodierten Parabraunerden fördern den Oberflächenabfluss, der während zeitweise auftretender Starkregenereignisse an den Hängen zum Einreißen von Erosionsschluchten führen kann . Zur Untersuchung des Phänomens wurden sowohl geomorphologische und bodenkundliche als auch historisch-kulturlandschaftgenetische Methoden herangezogen. Neben der bodenkundlichen Beprobung zahlreicher Aufschlüsse wurden auch Analysen mittels der Radiokarbonmethode, Schwermineralanalysen, Kohlholzspektren historischer Meilerplätze und die Auswertung von Archivunterlagen als Methoden herangezogen. Als grundlegendes Ergebnis liefert die vorliegende Arbeit einen umfassenden Abriss der Nutzungsgeschichte im Wassereinzugsgebiet der Aar von vorgeschichtlicher Zeit bis zum heutigen Tage. Zudem werden die naturräumlichen Einflussfaktoren, die die Entstehung von Erosionsschluchten erst ermöglichen, auf umfassende Weise dargestellt. Zwei Exkurse behandeln die Bedeutung der spätmittelalterlichen Landwehr bei Hennethal, die während der Geländearbeiten entdeckt wurde sowie die Entstehung und zeitliche Einordnung der Auelehme im Aartal.

Proteolyse des Amyloid-Vorläufer-Protein-verwandten APLP2 durch alpha-Sekretasen

Die im Laufe der Evolution konservierte Genfamilie des Amyloid-Vorläufer-Proteins APP beinhaltet sowohl bei der Maus als auch beim Menschen die beiden APP-ähnlichen ProteineAPLP1 und APLP2. Ziel dieser Arbeit war es, die proteolytische Prozessierung des APLP2 zu charakterisieren und die beteiligten Proteasen aufzuzeigen. Ausgehend von Stimulations- und Inhibitionsversuchen wurde die Metzincin-Familie der Metalloproteinasen als APLP2-Proteasen identifiziert. Durch Überexpression von ADAM10 und TACE (ADAM17) konnten zwei wichtige Prozessierungs-Enzyme des APLP2 charakterisiert werden. Damit wurde zum ersten Mal eine α-Sekretase-ähnliche Enzymaktivität analog zu der Spaltung des APP an APLP2 beschrieben. Untersuchungen an ADAM10-transgenen Mäusen bestätigten die proteolytische Prozessierung des APLP2 in vivo. Durch die Untersuchung neuronaler Differenzierung mit Retinsäure und Apoptose in Neuroblastoma-Zellen gelang der Nachweis einer funktionellen Koregulation von APLP2 und seiner Protease ADAM10, die zu einer erhöhten Freisetzung des neurotrophen löslichen APLP2 bei der Differenzierung und zu einer Reduktion bei Apoptose führt. In den Gehirnen von Alzheimer-Patienten gibt es sowohl Hinweise auf einen gestörten Vitamin A Metabolismus als auch auf verstärkte apoptotische Vorgänge, so dass hier erstmalig eine Verknüpfung der APLP2-Proteolyse mit zwei pathogenen Prozessen des Morbus Alzheimergezeigt werden konnten. Eine therapeutische Aktivierung der α-Sekretasen hätte die verstärkte Bildung von neurotrophem APPsα und APLP2s zur Folge. Es bestünde jedoch gleichzeitig die Gefahr von Nebenwirkungen durch die Spaltung weiterer Substrate wie der Notch-Rezeptoren oder des Prionenproteins. In dieser Arbeit konnte gezeigt werden, dass Notch-1 prinzipiell ein Substrat für ADAM10 darstellt, die Auswirkungen in vivo jedoch begrenzt und altersabhängig sind. Für das Prionenprotein ergab sich keine direkte Beeinflussung durch eine Spaltung, sondern vielmehr eine Expressionsminderung durch die Überexpression von ADAM10 in Mäusen. Die Inkubationszeit bei der Prionenerkrankung hängt von der Menge des endogenen zellulären Prionenproteins ab. Daher ergibt sich aus einer Steigerung der α-Sekretase-Aktivität eine potentielle Prävention gegenüber einer Infektion mit der pathogenen Scrapie-Form des Prionenproteins.

Evidenza del coinvolgimento di geni nell'insorgenza delle schisi labio-palatine

The CL/P are the most common and easily recognizable craniofacial malformations with a complex etiology that requires the involvement of genetic and environmental components. The analysis of the genetic component shows more than 14 loci and genes involved in the onset of the disease. I’ve selected and investigated some of the possible candidate genes for CL/P. MYH14 gene, that maps on chromosome 19, on the OFC3 locus, and shows a strong homology with MYH9 gene. I’ve also investigated TP63 and MID1 genes, that are responsible respectively for EEC syndrome and Opitz syndrome, both of them presenting cleft. I’ve also decided to investigate JAG2 because TP63 product regulates the this gene, and both of them are component of the Notch signalling pathway. I’ve, also, studied the MKX and LMO4 genes. MKX is an important development regulator that is highly expressed in palatal mesenchyme, and map in the region responsible for Twirler mutation that cause cleft in mouse. LMO4 is necessary for neural tube development and cooperating with Grhl3, promotes cellular migration during morphogenetic events like “in utero” cleft healing. Low folate levels and high levels of homocysteine increase the risk of cleft, genes involved in their metabolism may be of interest in cleft occurrence. I’ve decided to investigate BHMT and CBS genes coding for enzymes involved in homocysteine metabolism. I’ve also investigated BHMT2 gene that maps close to BHMT and presents with him a 73% of homology. I’ve performed a linkage analysis using SNPs mapping in the genes and their boundaries, for each gene, for MKX and LMO4 I’ve also performed a sequencing analysis. My results for MID1 and CBS genes support the hypothesis of a possible role of these genes in cleft. I’ve found borderline association values for JAG2, MKX and LMO4 genes.

A LES study of a modified Ahmed body geometry

A numerical study using Large Eddy Simulation Coherent Structure Model (LES-CSM), of the flow around a simplified Ahmed body, has been done in this work of thesis. The models used are two salient geometries from the experimental investigation performed in [1], and consist, in particular, in two notch-back body geometries. Six simulation are carried out in total, changing Reynolds number and back-light angle of the model’s rear part. The Reynolds numbers used, based on the height of the models and the free stream velocity, are Re = 10000, Re = 30000 and Re = 50000. The back-light angles of the slanted surface with respect to the horizontal roof surface, that characterizes the vehicle, are taken as B = 31.8◦ and B = 42◦ respectively. The experimental results in [1] have shown that, depending on the parameter B, asymmetric and symmetric averaged flow over the back-light and in the wake for a symmetric geometry can be observed. The aims of the present work of master thesis are principally two. The first aim is to investigate and confirm the influence of the parameter B on the presence of the asymmetry of the averaged flow, and confirm the features described in the experimental results. The second important aspect is to investigate and observe the influence of the second variable, the Reynolds number, in the developing of the asymmetric flow itself. The results have shown the presence of the mentioned asymmetry as well as an influence of the Reynolds number on it.

Componentistica avanzata per Impianti di Combustione a Biomassa

In un quadro internazionale di forte interesse verso uno sviluppo sostenibile e sfide energetiche per il futuro, il DIEM, in collaborazione con altri istituti di ricerca ed imprese private, sta progettando l’integrazione di componentistica avanzata su di una caldaia alimentata a biomasse. Lo scopo finale è quello di realizzare una caldaia a biomasse che produca energia in maniera più efficiente e con un impatto ambientale ridotto. L’applicazione è indirizzata inizialmente verso caldaie di piccola-media taglia (fino a 350 kW termici) vista la larga diffusione di questa tipologia di impianto. La componentistica in oggetto è: - filtro sperimentale ad alta efficienza per la rimozione del particolato; - celle a effetto Seebeck per la produzione di energia elettrica direttamente da energia termica senza parti meccaniche in movimento; - pompa Ogden per la produzione di energia meccanica direttamente da energia termica; La finalità dell’attività di ricerca è la progettazione dell’integrazione dei suddetti dispositivi con una caldaia a biomassa da 290 kW termici per la realizzazione di un prototipo di caldaia stand-alone ad impatto ambientale ridotto: in particolare, la caldaia è in grado, una volta raggiunte le condizioni di regime, di autoalimentare le proprie utenze elettriche, garantendo il funzionamento in sicurezza in caso di black-out o consentendo l’installazione della caldaia medesima in zone remote e prive di allaccio alla rete elettrica. Inoltre, la caldaia può fornire, tramite l'utilizzo di una pompa a vapore o pompa Ogden, energia meccanica per il pompaggio di fluidi: tale opportunità si ritiene particolarmente interessante per l'integrazione della caldaia nel caso di installazione in ambito agricolo. Infine, l'abbinamento di un filtro ad alta efficienza e basso costo consente l'abbattimento delle emissioni inquinanti, favorendo una maggiore diffusione della tecnologia senza ulteriori impatti sull'ambiente.

The search for Multiple Myeloma Stem cells: molecular characterization and self-renewal mechanisms involved in the disease persistence

The existence of Multiple Myeloma Stem cells (MMSCs)is supposed to be one of the major causes of MM drug-resistance. However, very little is known about the molecular characteristics of MMSCs, even if some studies suggested that these cells resembles the memory B cells. In order to molecularly characterize MMSCs, we isolated the 138+138- population. For each cell fraction we performed a VDJ rearrangement analysis. The complete set of aberrations were performed by SNP Array 6.0 and HG-U133 Plus 2.0 microarray analyses (Affymetrix). The VDJ rearrangement analyses confirmed the clonal relationship between the 138+ clone and the immature clone. Both BM and PBL 138+ clones showed exactly the same genomic macroalterations. In the BM and PBL 138-19+27+ cell fractions several micro-alterations (range: 1-350 Kb) unique of the memory B cells clone were highlighted. Any micro-alterations detected were located out of any genomic variants region and are presumably associated to the MM pathogenesis, as confirmed by the presence of KRAS, WWOX and XIAP genes among the amplified regions. To get insight into the biology of the clonotypic B cell population, we compared the gene expression profile of 8 MM B cells samples 5 donor B cells vs, thus showing a differential expression of 11480 probes (p-value: <0,05). Among the self-renewal mechanisms, we observed the down-regulation of Hedgehog pathway and the iperactivation of Notch and Wnt signaling. Moreover, these immature cells showed a particular phenotype correlated to resistance to proteasome inhibitors (IRE1α-XBP1: -18.0; -19.96. P<0,05). Data suggested that the MM 138+ clone might resume the end of the complex process of myelomagenesis, whereas the memory B cells have some intriguing micro-alterations and a specific transcriptional program, supporting the idea that these post germinal center cells might be involved in the transforming event that originate and sustain the neoplastic clone.

Giunzione mediante laser di materiali difficili, ibridi ed a struttura cellulare

Lo studio presentato in questa sede concerne applicazioni di saldatura LASER caratterizzate da aspetti di non-convenzionalità ed è costituito da tre filoni principali. Nel primo ambito di intervento è stata valutata la possibilità di effettuare saldature per fusione, con LASER ad emissione continua, su pannelli Aluminum Foam Sandwich e su tubi riempiti in schiuma di alluminio. Lo studio ha messo in evidenza numerose linee operative riguardanti le problematiche relative alla saldatura delle pelli esterne dei componenti ed ha dimostrato la fattibilità relativa ad un approccio di giunzione LASER integrato (saldatura seguita da un post trattamento termico) per la realizzazione della giunzione completa di particolari tubolari riempiti in schiuma con ripristino della struttura cellulare all’interfaccia di giunzione. Il secondo ambito di intervento è caratterizzato dall’applicazione di una sorgente LASER di bassissima potenza, operante in regime ad impulsi corti, nella saldatura di acciaio ad elevato contenuto di carbonio. Lo studio ha messo in evidenza come questo tipo di sorgente, solitamente applicata per lavorazioni di ablazione e marcatura, possa essere applicata anche alla saldatura di spessori sub-millimetrici. In questa fase è stato messo in evidenza il ruolo dei parametri di lavoro sulla conformazione del giunto ed è stata definita l’area di fattibilità del processo. Lo studio è stato completato investigando la possibilità di applicare un trattamento LASER dopo saldatura per addolcire le eventuali zone indurite. In merito all’ultimo ambito di intervento l’attività di studio si è focalizzata sull’utilizzo di sorgenti ad elevata densità di potenza (60 MW/cm^2) nella saldatura a profonda penetrazione di acciai da costruzione. L’attività sperimentale e di analisi dei risultati è stata condotta mediante tecniche di Design of Experiment per la valutazione del ruolo preciso di tutti i parametri di processo e numerose considerazioni relative alla formazione di cricche a caldo sono state suggerite.