Thigmotactic responses in an open-field

The goal of the present study was to investigate the role of thigmotaxis (the tendency to remain close to vertical surfaces) in rat exploratory behavior in an open-field. Thigmotaxis was investigated in a parametric way, using 24 experimentally adult naive male Wistar rats (210-230 g). Exploratory behavior was studied in an open-field (N = 12) in 5-min sessions and behavior was analyzed in terms of where it occurred: in areas surrounded by two, one, or no walls. Another group of rats (N = 12) was studied in an open-field with blocks placed near two of the corners so as to make these corner areas surrounded by three walls. The floor of the open-fields was divided into 20-cm squares in order to locate the exact place of occurrence of each behavior. The following behaviors were recorded: entries into the squares, rearings, and groomings. In both types of open-field the rats chose to remain longer in the squares surrounded by the largest possible number of walls. In one of the open-fields, the mean time (seconds) spent in squares surrounded by two walls was longer than the time spent in squares surrounded by one or no walls (37.2, 7.7, and 1.8 s, respectively). In the other open-field, the mean time spent in squares surrounded by three walls was longer than the time spent in squares surrounded by two, one or no walls (41.7, 20.4, 7.0, and 2.6 s, respectively). Other measures presented a similar profile. These results indicate that rats are sensitive to the number of walls in an environment and prefer to remain close to them.

Expression of beta 2 integrin (CD18) in embryonic mouse and chicken heart

Integrins are heterodimeric receptors composed of α and β transmembrane subunits that mediate attachment of cells to the extracellular matrix and counter-ligands such as ICAM-1 on adjacent cells. β2 integrin (CD18) associates with four different α (CD11) subunits to form an integrin subfamily, which has been reported to be expressed exclusively on leukocytes. However, recent studies indicate that β2 integrin is also expressed by other types of cells. Since the gene for β2 integrin is located in the region of human chromosome 21 associated with congenital heart defects, we postulated that it may be expressed in the developing heart. Here, we show the results from several different techniques used to test this hypothesis. PCR analyses indicated that β2 integrin and the αL, αM, and αX subunits are expressed during heart development. Immunohistochemical studies in both embryonic mouse and chicken hearts, using antibodies directed against the N- or C-terminal of β2 integrin or against its α subunit partners, showed that β2 integrin, as well as the αL, αM, and αX subunits, are expressed by the endothelial and mesenchymal cells of the atrioventricular canal and in the epicardium and myocardium during cardiogenesis. In situ hybridization studies further confirmed the presence of β2 integrin in these various locations in the embryonic heart. These results indicate that the β2 integrin subfamily may have other activities in addition to leukocyte adhesion, such as modulating the migration and differentiation of cells during the morphogenesis of the cardiac valves and myocardial walls of the heart.

Short-term exposure of mice to cigarette smoke and/or residual oil fly ash produces proximal airspace enlargements and airway epithelium remodeling

Chronic obstructive pulmonary disease (COPD) is associated with inflammatory cell reactions, tissue destruction and lung remodeling. Many signaling pathways for these phenomena are still to be identified. We developed a mouse model of COPD to evaluate some pathophysiological mechanisms acting during the initial stage of the disease. Forty-seven 6- to 8-week-old female C57/BL6 mice (approximately 22 g) were exposed for 2 months to cigarette smoke and/or residual oil fly ash (ROFA), a concentrate of air pollution. We measured lung mechanics, airspace enlargement, airway wall thickness, epithelial cell profile, elastic and collagen fiber deposition, and by immunohistochemistry transforming growth factor-β1 (TGF-β1), macrophage elastase (MMP12), neutrophils and macrophages. We observed regional airspace enlargements near terminal bronchioles associated with the exposure to smoke or ROFA. There were also increases in airway resistance and thickening of airway walls in animals exposed to smoke. In the epithelium, we noted a decrease in the ciliated cell area of animals exposed to smoke and an increase in the total cell area associated with exposure to both smoke and ROFA. There was also an increase in the expression of TGF-β1 both in the airways and parenchyma of animals exposed to smoke. However, we could not detect inflammatory cell recruitment, increases in MMP12 or elastic and collagen fiber deposition. After 2 months of exposure to cigarette smoke and/or ROFA, mice developed regional airspace enlargements and airway epithelium remodeling, although no inflammation or increases in fiber deposition were detected. Some of these phenomena may have been mediated by TGF-β1.

Ox-LDL increases OX40L in endothelial cells through a LOX-1-dependent mechanism

Oxidative low-density lipoprotein (Ox-LDL) is a key risk factor for the development of atherosclerosis, and it can stimulate the expression of a variety of inflammatory signals. As a new and highly sensitive inflammation index, OX40L may be a key to understanding the mechanisms that regulate interactions between cells within the vessel wall and inflammatory mediators during the development of atherosclerosis. To investigate whether Ox-LDL regulates OX40L expression through an oxidized LDL-1 receptor (LOX-1)-mediated mechanism, we investigated the effect of different concentrations of Ox-LDL (50, 100, 150 µg/mL) on endothelial cell proliferation and apoptosis. Stimulation with Ox-LDL increased OX40L protein 1.44-fold and mRNA 4.0-fold in endothelial cells, and these effects were inhibited by blocking LOX-1. These results indicate that LOX-1 plays an important role in the chronic inflammatory process in blood vessel walls. Inhibiting LOX-1 may reduce blood vessel inflammation and provide a therapeutic option to limit atherosclerosis progression.

Microparticles obtained by complex coacervation: influence of the type of reticulation and the drying process on the release of the core material

Microparticles obtained by complex coacervation were crosslinked with glutaraldehyde or with transglutaminase and dried using freeze drying or spray drying. Moist samples presented Encapsulation Efficiency (%EE) higher than 96%. The mean diameters ranged from 43.7 ± 3.4 to 96.4 ± 10.3 µm for moist samples, from 38.1 ± 5.36 to 65.2 ± 16.1 µm for dried samples, and from 62.5 ± 7.5 to 106.9 ± 26.1 µm for rehydrated microparticles. The integrity of the particles without crosslinking was maintained when freeze drying was used. After spray drying, only crosslinked samples were able to maintain the wall integrity. Microparticles had a round shape and in the case of dried samples rugged walls apparently without cracks were observed. Core distribution inside the particles was multinuclear and homogeneous and core release was evaluated using anhydrous ethanol. Moist particles crosslinked with glutaraldehyde at the concentration of 1.0 mM.g-1 protein (ptn), were more efficient with respect to the core retention compared to 0.1 mM.g-1 ptn or those crosslinked with transglutaminase (10 U.g-1 ptn). The drying processes had a strong influence on the core release profile reducing the amount released to all dry samples

Screening of iron-enriched fungus from natural environment and evaluation of organically bound iron bioavailability in rats

Iron is an essential element for nearly all living organisms, and its deficiency is the most common form of malnutrition in the world. The organic forms of trace elements are considered more bioavailable than the inorganic forms. Although Saccharomyces cerevisiae can enrich metal elements and convert inorganic iron to organic species, its tolerability and transforming capacity are limited. The aim of this study was to screen higher biomass and other iron-enriched fungi strains besides Saccharomyces cerevisiae from the natural environment. A PDA medium containing 800 μg/mL iron was used for initial screening. Fifty strains that tolerated high iron concentration were isolated from the natural environment, and only one strain, No.BY1109, grew well at Fe (II) concentration of 10,000μg/ml. According to morphological characterization, 18S rDNA sequence analysis, and biophysical and biochemical characterization, the strain No.BY1109 was identified as Rhodotorula. The iron content of No.BY1109 (10 mg Fe/g dry cell) was determined using atomic absorption spectrometry. The results of distribution of iron in the cells showed that iron ion was mainly chelated in the cell walls and vacuoles. The bioavailability in rats confirmed that strain No.BY1109 had higher absorption efficiency than that of ferrous sulfate after single dose oral administration. The present study introduces new iron supplements, and it is a basis for finding new iron supplements from natural environment.

Press forming of paperboard – advancement of converting tools and process control

Press forming is nowadays one of the most common industrial methods in use for producing deeper trays from paperboard. Demands for material properties like recyclability and sustainability have increased also in the packaging industry, but there are still limitations related to the formability of paperboard. A majority of recent studies have focused on material development, but the potential of the package manufacturing process can also be improved by the development of tooling and process control. In this study, advanced converting tools (die cutting tools and the press forming mould) are created for production scale paperboard tray manufacturing. Also monitoring methods that enable the production of paperboard trays with enhanced quality, and can be utilized in process control are developed. The principles for tray blank preparation, including creasing pattern and die cutting tool design are introduced. The mould heating arrangement and determination of mould clearance are investigated to improve the quality of the press formed trays. The effect of the spring back of the tray walls on the tray dimensions can be managed by adjusting the heat-related process parameters and estimating it at the mould design stage. This enables production speed optimization as the process parameters can be adjusted more freely. Real-time monitoring of pressing force by using multiple force sensors embedded in the mould structure can be utilized in the evaluation of material characteristics on a modified production machinery. Comprehensive process control can be achieved with a combination of measurement of the outer dimensions of the trays and pressing force monitoring. The control method enables detection of defects and tracking changes in the material properties. The optimized converting tools provide a basis for effective operation of the control system.

Voimalaitosten kattilaputkien sisäpuolisten kerrostumien paksuuden mittaaminen ultraäänimenetelmällä

Höyryvoimalaitoksen käyttöönotossa muodostuu kattilaputkien sisäpinnoille niitä korroosiolta suojaava ohut metallioksidikerros. Tämän kerroksen päälle kasvaa kattilan käytön aikana haitallista kerrostumaa paikallisen korroosion tai kattilavedessä olevien epäpuhtauksien kerääntymisen tai kiteytymisen seurauksena. Kerrostuma haittaa lämmönsiirtoa tulipesästä putkiseinämän läpi kattilaveteen. Putkien lämpötilan nousu suunniteltua korkeammaksi kasvattaa putkivaurioiden ja sisäpuolisen korroosion riskiä. Tästä johtuen paksuksi kasvaneet kerrostumat pyritään poistamaan happokäsittelyllä eli peittauksella ennen vaurioiden syntyä. Perinteisesti kerrostumapaksuus on määritetty kattilasta irrotetuista näyteputkista mikroskoopilla. Työn tavoitteena oli tutkia uudenlaisen ultraäänimittauksen teoriaa ja selvittää sen toimivuus höyrystinputkien kerrostumapaksuusmittauksissa. Lisäksi tavoitteena oli tutkia voimalaitoksen höyrystimen sisäpuolisten kerrostumien muodostumista ja niiden vaikutuksia sekä kattilan peittaustarpeen arviointia. Höyrystimen kerrostumien kasvunopeuteen vaikuttavat eniten voimalaitostyyppi, käytetty vesikemia ja kattilaveteen kulkeutuvien epäpuhtauksien määrä. Kasvunopeus vaihtelee laitosten välillä suuresti ja eroaa myös tulipesän eri kohdissa. Kattilaveden epäpuhtauspitoisuus ja kerrostumapaksuus vaikuttavat molemmat korroosiovaurioiden todennäköisyyteen. Peittauspaksuuden ohjearvoissa tulisi huomioida kattilan käyttöpaine, kattilatyyppi ja riski kattilaveden laadun heikkenemiselle. Putkinäytteistä ja laitoksilla suoritettujen mittauksien perusteella uusi ultraäänitekniikka tuottaa luotettavia tuloksia tavanomaisten kerrostumien mittauksessa. Vain yhdellä laitoksella esiintyi irtonaisen sakan kaltaista kerrostumaa, jota mittaus ei kyennyt havaitsemaan. Mittaustulokset kerrostumista tulipesän eri osissa antavat hyvän perustan peittaustarpeen arviointiin.

Forecasting with social media – Using Facebook likes to predict the results of the 2015 Finnish Parliamentary elections

Already one-third of the human population uses social media on a daily basis. The biggest social networking site Facebook has over billion monthly users. As a result, social media services are now recording unprecedented amount of data on human behavior. The phenomenon has certainly caught the attention of scholars, businesses and governments alike. Organizations around the globe are trying to explore new ways to benefit from the massive databases. One emerging field of research is the use of social media in forecasting. The goal is to use data gathered from online services to predict offline phenomena. Predicting the results of elections is a prominent example of forecasting with social media, but regardless of the numerous attempts, no reliable technique has been established. The objective of the research is to analyze how accurately the results of parliament elections can be forecasted using social media. The research examines whether Facebook “likes” can be effectively used for predicting the outcome of the Finnish parliament elections that took place in April 2015. First a tool for gathering data from Facebook was created. Then the data was used to create an electoral forecast. Finally, the forecast was compared with the official results of the elections. The data used in the research was gathered from the Facebook walls of all the candidates that were running for the parliament elections and had a valid Facebook page. The final sample represents 1131 candidates and over 750000 Facebook “likes”. The results indicate that creating a forecast solely based on Facebook “likes” is not accurate. The forecast model predicted very dramatic changes to the Finnish political landscape while the official results of the elections were rather moderate. However, a clear statistical relationship between “likes” and votes was discovered. In conclusion, it is apparent that citizens and other key actors of the society are using social media in an increasing rate. However, the volume of the data does not directly increase the quality of the forecast. In addition, the study faced several other limitations that should be addressed in future research. Nonetheless, discovering the positive correlation between “likes” and votes is valuable information that can be used in future studies. Finally, it is evident that Facebook “likes” are not accurate enough and a meaningful forecast would require additional parameters.

Movax Oy:n tuotteiden ja tekniikan käyttömahdollisuudet pilaantuneiden maa-alueiden ja pohjavesien kunnostushankkeissa

Työn tavoitteena on tarkastella erilaisia in-situ -kunnostusmenetelmiä maaperän ja pohjaveden kunnostushankkeissa ja niiden toteutusvaihtoehtoja sekä vertailla niitä keskenään. Työssä tarkastellaan myös lainsäädännön ja eri menetelmien kehittymistä, niiden tulevaisuuden näkymiä sekä pohditaan yrityksen tuotteiden liiketoimintamahdollisuuksia tämän pohjalta. Tietoa kerätään kirjallisuudesta sekä tapaustutkimuksista ja niitä peilataan yrityksen sisällä olevaan hiljaiseen tietoon. Löydettyä kirjallisuustietoa sekä tapaustutkimuksia on analysoitu SWOT-analyysien sekä ryhmittelyjen avulla. Työn tuloksena on esitetty vaihtoehtoinen tapa asentaa reaktiivinen seinämä pohjaveden kunnostushankkeissa yrityksen tuotteiden ja putkipaalujen avulla. Lisäksi työn pohjalta voidaan koota materiaalia ja lisätietoa asiakkaille sekä myynnin ja markkinoinnin tukemiseen. Tulosten pohjalta voidaan arvioida, että kyseinen menetelmä tukisi myös kestävän kehityksen periaatteita kunnostushankkeen toteutus- ja asennusvaiheessa. Menetelmän avulla voitaisiin mahdollisesti vähentää reaktiivisten seinämien asentamiseen liittyviä ympäristövaikutuksia.

Structural Work

Construction on the Aquatic Centre progresses and concrete walls go up.

Concrete Forms

Forms and reinforcing steel bars used in the walls of the Aquatic Centre.

Steel Reinforcing Bars

Steel reinforcing bars used in the construction of the walls for the Aquatic Centre.

Wall Construction

Pouring the concrete during the construction of the walls for the Aquatic Centre.

Wall and Pillar Construction

Construction of the concrete walls and pillars for the Aquatic Centre.