Stability of hydrotalcites formed from Bayer refinery environmental control processes

Bauxite refinery residues (red mud) are derived from the Bayer process by the digestion of crushed bauxite in concentrated sodium hydroxide at elevated temperatures and pressures. This slurry residue, if untreated, is unsuitable for discharge directly into the environment and is usually stored in tailing dams. The liquid portion has the potential for discharge, but requires pre-treatment before this can occur. The seawater neutralisation treatment facilitates a significant reduction in pH and dissolved metal concentrations, through the precipitation of hydrotalcite-like compounds and some other Mg, Ca, and Al hydroxide and carbonate minerals. The hydrotalcite-like compounds, precipitated during seawater neutralisation, also remove a range of transition metals, oxy-anions and other anionic species through a combination of intercalation and adsorption reactions: smaller anions are intercalated into the hydrotalcite matrix, while larger molecules are adsorbed on the particle surfaces. A phenomenon known as ‘reversion’ can occur if the seawater neutralisation process is not properly controlled. Reversion causes an increase in the pH and dissolved impurity levels of the neutralised effluent, rendering it unsuitable for discharge. It is believed that slow dissolution of components of the red mud residue and compounds formed during the neutralisation process are responsible for reversion. This investigation looked at characterising natural hydrotalcite (Mg6Al2(OH)16(CO3)∙4H2O) and ‘Bayer’ hydrotalcite (synthesised using the seawater neutralisation process) using a variety of techniques including X-ray diffraction, infrared and Raman spectroscopy, and thermogravimetric analysis. This investigation showed that Bayer hydrotalcite is comprised of a mixture of 3:1 and 4:1 hydrotalcite structures and exhibited similar chemical characteristic to the 4:1 synthetic hydrotalcite. Hydrotalcite formed from the seawater neutralisation of Bauxite refinery residues has been found not to cause reversion. Other components in red mud were investigated to determine the cause of reversion and this investigation found three components that contributed to reversion: 1) tricalcium aluminate, 2) hydrocalumite and 3) calcium hydroxide. Increasing the amount of magnesium in the neutralisation process has been found to be successful in reducing reversion.

Using operations research methodologies to improve operating theatre scheduling

A hospital consists of a number of wards, units and departments that provide a variety of medical services and interact on a day-to-day basis. Nearly every department within a hospital schedules patients for the operating theatre (OT) and most wards receive patients from the OT following post-operative recovery. Because of the interrelationships between units, disruptions and cancellations within the OT can have a flow-on effect to the rest of the hospital. This often results in dissatisfied patients, nurses and doctors, escalating waiting lists, inefficient resource usage and undesirable waiting times. The objective of this study is to use Operational Research methodologies to enhance the performance of the operating theatre by improving elective patient planning using robust scheduling and improving the overall responsiveness to emergency patients by solving the disruption management and rescheduling problem. OT scheduling considers two types of patients: elective and emergency. Elective patients are selected from a waiting list and scheduled in advance based on resource availability and a set of objectives. This type of scheduling is referred to as ‘offline scheduling’. Disruptions to this schedule can occur for various reasons including variations in length of treatment, equipment restrictions or breakdown, unforeseen delays and the arrival of emergency patients, which may compete for resources. Emergency patients consist of acute patients requiring surgical intervention or in-patients whose conditions have deteriorated. These may or may not be urgent and are triaged accordingly. Most hospitals reserve theatres for emergency cases, but when these or other resources are unavailable, disruptions to the elective schedule result, such as delays in surgery start time, elective surgery cancellations or transfers to another institution. Scheduling of emergency patients and the handling of schedule disruptions is an ‘online’ process typically handled by OT staff. This means that decisions are made ‘on the spot’ in a ‘real-time’ environment. There are three key stages to this study: (1) Analyse the performance of the operating theatre department using simulation. Simulation is used as a decision support tool and involves changing system parameters and elective scheduling policies and observing the effect on the system’s performance measures; (2) Improve viability of elective schedules making offline schedules more robust to differences between expected treatment times and actual treatment times, using robust scheduling techniques. This will improve the access to care and the responsiveness to emergency patients; (3) Address the disruption management and rescheduling problem (which incorporates emergency arrivals) using innovative robust reactive scheduling techniques. The robust schedule will form the baseline schedule for the online robust reactive scheduling model.

Produsage: a closer look at continuing developments

The concept of produsage developed from the realisation that new language was needed to describe the new phenomena emerging from the intersection of Web 2.0, user-generated content, and social media since the early years of the new millennium. When hundreds, thousands, maybe tens of thousands of participants utilise online platforms to collaborate in the development and continuous improvement of a wide variety of content – from software to informational resources to creative works –, and when this work takes place through a series of more or less unplanned, ad hoc, almost random cooperative encounters, then to describe these processes using terms which were developed during the industrial revolution no longer makes much sense. When – exactly because what takes place here is no longer a form of production in any conventional sense of the word – the outcomes of these massively distributed collaborations appear in the form of constantly changing, permanently mutable bodies of work which are owned at once by everyone and no-one, by the community of contributors as a whole but by none of them as individuals, then to conceptualise them as fixed and complete products in the industrial meaning of the term is missing the point. When what results from these efforts is of a quality (in both depth and breadth) that enables it to substitute for, replace, and even undermine the business model of long-established industrial products, even though precariously it relies on volunteer contributions, and when their volunteering efforts make it possible for some contributors to find semi- or fully professional employment in their field, then conventional industrial logic is put on its head.

Breaching the standardised assessment boundary : assessment for learning as a field of exchange

The introduction of the Australian curriculum, the use of standardised testing (e.g. NAPLAN) and the My School website are couched in a context of accountability. This circumstance has stimulated and in some cases renewed a range of boundaries in Australian Education. The consequences that arise from standardised testing have accentuated the boundaries produced by social reproduction in education which has led to an increase in the numbers of students disengaging from mainstream education and applying for enrolment at the Edmund Rice Education Australia Flexible Learning Centre Network (EREAFLCN). Boundaries are created for many young people who are denied access to credentials and certification as a result of being excluded from or in some way disengaging from standardised education and testing. Young people who participate at the EREAFLCN arrive with a variety of forms of cultural capital that are not valued in current education and employment fields. This is not to say that these young people’s different forms of cultural capital have no value, but rather that such funds of knowledge, repertoires and cultural capital are not valued by the majority of powerful agents in educational and employment fields. How then can the qualitative value of traditionally unorthodox - yet often intricate, ingenious, and astute - versions of cultural capital evident in the habitus of many young people be made to count, be recognised, be valuated? Can a process of educational assessment be a field of capital exchange and a space which breaches boundaries through a valuating process? This paper reports on the development of an innovative approach to assessment in an alternative education institution designed for the re-engagement of ‘at risk’ youth who have left formal schooling. A case study approach has been used to document the engagement of six young people, with an educational approach described as assessment for learning as a field of exchange across two sites in the EREAFLCN. In order to capture the broad range of students’ cultural and social capital, an electronic portfolio system (EPS) is under trial. The model draws on categories from sociological models of capital and reconceptualises the eportfolio as a sociocultural zone of learning and development. Results from the trial show a general tendency towards engagement with the EPS and potential for the attainment of socially valued cultural capital in the form of school credentials. In this way restrictive boundaries can be breached and a more equitable outcome achieved for many young Australians.

Towards general capabilities through technology : assessment for learning as a field of exchange

The introduction of the Australian curriculum, the use of standardised testing (e.g. NAPLAN) and the My School website have stimulated and in some cases renewed a range of boundaries for young people in Australian Education. Standardised testing has accentuated social reproduction in education with an increase in the numbers of students disengaging from mainstream education and applying for enrolment at the Edmund Rice Education Australia Flexible Learning Centre Network (EREAFLCN). Many young people are denied access to credentials and certification as they become excluded from standardised education and testing. The creativity and skills of marginalised youth are often evidence of general capabilities and yet do not appear to be recognised in mainstream educational institutions when standardised approaches are adopted. Young people who participate at the EREAFLCN arrive with a variety of forms of cultural capital, frequently utilising general capabilities, which are not able to be valued in current education and employment fields. This is not to say that these young people‟s different forms of cultural capital have no value, but rather that such funds of knowledge, repertoires and cultural capital are not valued by the majority of powerful agents in educational and employment fields. How then can the inherent value of traditionally unorthodox - yet often intricate, ingenious, and astute-versions of cultural capital evident in the habitus of many young people be made to count, be recognised, be valuated?Can a process of educational assessment be a field of capital exchange and a space which crosses boundaries through a valuating process? This paper reports on the development of an innovative approach to assessment in an alternative education institution designed for the re engagement of „at risk‟ youth who have left formal schooling. A case study approach has been used to document the engagement of six young people, with an educational approach described as assessment for learning as a field of exchange across two sites in the EREAFLCN. In order to capture the broad range of students‟ cultural and social capital, an electronic portfolio system (EPS) is under trial. The model draws on categories from sociological models of capital and reconceptualises the eportfolio as a sociocultural zone of learning and development. Results from the trial show a general tendency towards engagement with the EPS and potential for the attainment of socially valued cultural capital in the form of school credentials. In this way restrictive boundaries can be breached and a more equitable outcome achieved for many young Australians.

Teen content creators : experiences of using information to learn

As access to networked digital communities increases, a growing number of teens participate in digital communities by creating and sharing a variety of content. The affordances of social media - ease of use, ubiquitous access, and communal nature - have made creating and sharing content an appealing process for teens. Teens primarily learn the practices of encountering and using information through social interaction and participation within digital communities. This article adopts the position that information literacy is the experience of using information to learn. It reports on an investigation into teens experiences in the United States, as they use information to learn how to create content and participate within the context of social media. Teens that participate in sharing art on sites such as DeiviantArt, website creation, blogging, and/or posting edited videos via YouTube and Vimeo, were interviewed. The interviews explored teens' information experiences within particular social and digital contexts. Teens discussed the information they used, how information was gathered and accessed, and explored the process of using that information to participate in the communities.

Recommendations for the reporting of foot and ankle models

Multiple marker sets and models are currently available for assessing foot and ankle kinematics in gait. Despite the presence of such a wide variety of models, the reporting of methodological designs remains inconsistent and lacks clearly defined standards. This review highlights the variability found when reporting biomechanical model parameters, methodological design, and model reliability. Further, the review clearly demonstrates the need for a consensus of what methodological considerations to report in manuscripts, which focus on the topic of foot and ankle biomechanics. We propose five minimum reporting standards, that we believe will ensure the transparency of methods and begin to allow the community to move towards standard modelling practice. The strict adherence to these standards should ultimately improve the interpretation and clinical useability of foot and ankle marker sets and their corresponding models.

A Systematic Review of kinematic models used in foot & ankle biomechanics

Over the past decade our understanding of foot function has increased significantly[1,2]. Our understanding of foot and ankle biomechanics appears to be directly correlated to advances in models used to assess and quantify kinematic parameters in gait. These advances in models in turn lead to greater detail in the data. However, we must consider that the level of complexity is determined by the question or task being analysed. This systematic review aims to provide a critical appraisal of commonly used marker sets and foot models to assess foot and ankle kinematics in a wide variety of clinical and research purposes.

PySSM : a Python module for Bayesian inference of linear Gaussian state space models

PySSM is a Python package that has been developed for the analysis of time series using linear Gaussian state space models (SSM). PySSM is easy to use; models can be set up quickly and efficiently and a variety of different settings are available to the user. It also takes advantage of scientific libraries Numpy and Scipy and other high level features of the Python language. PySSM is also used as a platform for interfacing between optimised and parallelised Fortran routines. These Fortran routines heavily utilise Basic Linear Algebra (BLAS) and Linear Algebra Package (LAPACK) functions for maximum performance. PySSM contains classes for filtering, classical smoothing as well as simulation smoothing.

An audio wiki supporting mobile collaboration

Wikis have proved to be very effective collaboration and knowledge management tools in large variety of fields thanks to their simplicity and flexible nature. Another important development for the internet is the emergence of powerful mobile devices supported by fast and reliable wireless networks. The combination of these developments begs the question of how to extend wikis on mobile devices and how to leverage mobile devices' rich modalities to supplement current wikis. Realizing that composing and consuming through auditory channel is the most natural and efficient way for mobile device user, this paper explores the use of audio as the medium of wiki. Our work, as the first step towards this direction, creates a framework called Mobile Audio Wiki which facilitates asynchronous audio-mediated collaboration on the move. In this paper, we present the design of Mobile Audio Wiki. As a part of such design, we propose an innovative approach for a light-weight audio content annotation system for enabling group editing, versioning and cross-linking among audio clips. To elucidate the novel collaboration model introduced by Mobile Audio Wiki, its four usage modes are identified and presented in storyboard format. Finally, we describe the initial design for presentation and navigation of Mobile Audio Wiki.

Perspectives on Projects

Modern project management had its genesis in the field of operations research in the late 1940s, but today it is a much more diverse subject. It has evolved and developed a much wider range of methods, techniques, and skills that the project manager can draw upon. Not all these skills are relevant to every project, but an assortment of them will be relevant to most. This book aims to describe for students, researchers and managers the full range of skills that project managers can use to develop their methodologies.The authors group the skills into nine perspectives, representing nine schools of project management research and theory. By attaching a metaphor to each of these perspectives, students, researchers and managers are better able to understand each approach and decide whether it is best suited to the development of a strategy for managing their project. Perspectives on Projects builds upon the various theoretical orientations that the field of project management has developed. Featuring several case studies, drawn from a variety of settings, to illustrate how the different schools can provide different perspectives on projects, this book is an ideal text for anyone involved in project management.

Investigating the future of project management : a co-word analysis approach

If Project Management (PM) is a well-accepted mode of managing organizations, more and more organizations are adopting PM in order to satisfy the diversified needs of application areas within a variety of industries and organizations. Concurrently, the number of PM practitioners and people involved at various level of qualification is vigorously rising. Thus the importance to characterize, define and understand this field and its underlying strength, basis and development is paramount. For this purpose we will referee to sociology of actor-networks and qualitative scientometrics leading to the choice of the co-word analysis method in enabling us to capture the project management field and its dynamics. Results of a study based on the analysis of EBSCO Business Source Premier Database will be presented and some future trends and scenarios proposed. The main following trends are confirmed, in alignment with previous studies: continuous interest for the “cost engineering” aspects, on going interest for Economic aspects and contracts, how to deal with various project types (categorizations), the integration with Supply Chain Management and Learning and Knowledge Management. Furthermore besides these continuous trends, we can note new areas of interest: the link between strategy and project, Governance, the importance of maturity (organizational performance and metrics, control) and Change Management. We see the actors (Professional Bodies, Governmental Bodies, Agencies, Universities, Industries, Researchers, and Practitioners) reinforcing their competing/cooperative strategies in the development of standards and certifications and moving to more “business oriented” relationships with their members and main stakeholders (Governments, Institutions like European Community, Industries, Agencies, NGOs…), at least at central level.

Let them bloom : Growing colourful citizens with caring classroom teachers

This paper examines the essential qualities of a good classroom teacher. The analogy of a caring gardener who understands the individual growing needs of a vast variety of plants is used. The paper argues for the freedom to have differing non-sectarian curricula and for trust to be placed in the teaching profession.

Three-dimensional geological modelling and multivariate statistical analysis of water chemistry data to analyse and visualise aquifer structure and groundwater composition in the Wairau Plain, Marlborough District, New Zealand

Concerns regarding groundwater contamination with nitrate and the long-term sustainability of groundwater resources have prompted the development of a multi-layered three dimensional (3D) geological model to characterise the aquifer geometry of the Wairau Plain, Marlborough District, New Zealand. The 3D geological model which consists of eight litho-stratigraphic units has been subsequently used to synthesise hydrogeological and hydrogeochemical data for different aquifers in an approach that aims to demonstrate how integration of water chemistry data within the physical framework of a 3D geological model can help to better understand and conceptualise groundwater systems in complex geological settings. Multivariate statistical techniques(e.g. Principal Component Analysis and Hierarchical Cluster Analysis) were applied to groundwater chemistry data to identify hydrochemical facies which are characteristic of distinct evolutionary pathways and a common hydrologic history of groundwaters. Principal Component Analysis on hydrochemical data demonstrated that natural water-rock interactions, redox potential and human agricultural impact are the key controls of groundwater quality in the Wairau Plain. Hierarchical Cluster Analysis revealed distinct hydrochemical water quality groups in the Wairau Plain groundwater system. Visualisation of the results of the multivariate statistical analyses and distribution of groundwater nitrate concentrations in the context of aquifer lithology highlighted the link between groundwater chemistry and the lithology of host aquifers. The methodology followed in this study can be applied in a variety of hydrogeological settings to synthesise geological, hydrogeological and hydrochemical data and present them in a format readily understood by a wide range of stakeholders. This enables a more efficient communication of the results of scientific studies to the wider community.

Reflections around artefacts : using a deliberative approach to teaching reflective practices in fashion studies

While requiring students to think reflectively is a desirable teaching goal, it is often fraught with complexity and is sometimes poorly implemented in higher education. In this paper, we describe an approach to academic reflective practices that fitted a design subject in fashion education and was perceived as effective in enhancing student learning outcomes. In many design-based disciplines, it is essential to evaluate, through a reflective lens, the quality of tangible design outcomes - referred to here as artefacts. Fashion studio based practice (unlike many other theory based disciplines)requires an artefact to be viewed in order to initiate the reflective process. This reflection is not solely limited to reflective writing; the reflection happens through sight, touch and other non-traditional approaches. Fashion students were asked to reflect before, during and after the development of an artefact. Through a variety of media, a review of the first garment prototype - called a Sample Review - occurred. The reflective practices of students during the Sample Review provided a valuable insight into their own learning, as well as a valid assessment indicator for the lecturer. It also mirrored industry practices for design evaluation. We believe that this deliberative approach, characterised by artefact-prompted reflection, has wide applicability across undergraduate courses in a variety of discipline areas.