Transportation of fish - 3. Biochemical changes in fish during transportation in insulated containers

The changes in the biochemistry of different varieties of iced fish during transportation in thermocole lined second hand tea chests from Veraval to Bombay and Delhi are discussed. The moisture increased for all the varieties except for eel and hilsa at Bombay. TMAN and TVN increased in all cases. Maximum increase of TMAN and TVN was observed in seer fish.

Comparative study of traditional and improved containers for transportation of fresh fish

Traditional bamboo basket and expanded polystyrene insulated plywood box (second hand tea-chest) were compared for transportation of iced marine, fresh water and brackish water fishes from Kakinada to Madras by rail. Quality of fish at dispatching and receiving centres was assessed by organoleptic, total volatile nitrogen (TVN) and total bacterial count (TBC) tests. Based on the results obtained and the prices fetched, the traditional bamboo basket apart from being cheaper was found to be as good as expanded polystyrene insulated plywood box for short distance transportation of iced fish involving less than 24 hours journey.

Features of wave field, its effect to erosion - deposition processes in the Cua Dai (Hoi An), Cai river mouth (Nha Trang) and Phan Thiet Bay in typical local wind conditions

Based on the hydrodynamic model and Shore Protection Manual (CERC - USA) we have calculated wave field characteristics in the typical wind conditions (wind velocity equal to 13m/s in the high frequency direction of the wind regime). Comparison between measured and calculated wave parameters was presented and these results were corresponded to each other. The following main wave characteristics were calculated: -Pattern of the refraction wave field. -Average wave height field. -Longshore current velocity field in surf zone. From distribution features of wave field characteristics in research areas, it could be summarized as following: - The formation of wave fields in the research areas was unequal because of their local difference of hydrometeorological conditions, river discharge, bottom relief… - At Cuadai (Dai mouth, Hoian) area in the N direction of incident wave field, wave has caused serious variation of the coastline. The coastline in the whole region, especially, at the south of the mouth was eroded and the foreland in the north of the mouth was deposited. - At Cai river mouth (Nhatrang) area in the E direction of incident wave field, wave has effected strongly and directly to the inshore and channel structure. - At Phanthiet bay area in the SW direction of incident wave field, wave has effected strongly to the whole shoreline from Da point to Ne point and caused serious erosion.

A review on oil sardine 1. Distribution, preservation and transportation

Oil sardine (Sardinella longiceps) is widely reported from the Indian Ocean and southeast Asia coasts. It is found, with other less important spp of Sardinella, around both coasts of India. Landings have shown wide variations from yr to yr. Figures were 7412 tons in 1956 and 301,641 tons in 1968. Various possible reasons for this are noted. The main fishery is concentrated in coastal waters 12-15 km from shore in waters up to 15 m deep. The gears used are mostly seine nets. Though the fish has a good protein value, its prices do not compare well to other fish, often due to handling and preservation difficulties. Problems encountered during preservation and transportation of the fish are considered. These include bursting and rancidity.

Transportation of fish - 1. A preliminary study on insulated containers and their efficacy in long distance transportation

Polythene lined thermocole insulated plywood boxes (second-hand tea chests) could be successfully used for transport of fresh iced fish. It was found that a minimum of 25 mm thermocole insulation was necessary during summer (April to June) and 15 mm during winter (Nov. to March). By using these insulated boxes the initial fish to ice ratio could be brought down to 1:0.75 and still further to 1:0.5 at the height of winter in Jan. and Feb. These second-hand tea chests are robust and are able to stand a minimum of 5 trips to and fro. The moulded polystyrene boxes are not suited for long distance transport. Another redeeming feature in the entire operation was that there was practically no loss of fish due to spoilage in transit. 100% of the fish transported was in acceptable condition and could be marketed. In the non-insulated boxes used by the trade, the loss due to spoilage ranged from 10% to 25%, and this could be completely eliminated by the use of these insulated boxes.

Investigations on long distance transportation of fish 1. Transportation of frozen fish from Cochin to Calcutta

Oil Sardine (Sardinella longiceps), mackerel (Rastrelliger kanagurta), cat fish (Arius sp.), threadfin bream (Nemipterus japonicus) and ribbon fish (Trichurus sp.) were frozen in glazed/unglazed blocks, packed in expanded polystyrene (EPS) insulated plywood boxes with and without additional ice and despatched in uninsulated parcel vans of trains from Cochin to Calcutta. The consignments reached the destination in excellent condition and were readily disposed off.

Studies on the transportation of live clams

Live clams (Villorita cyprinoides) collected from their natural beds were packed in different ways like dry pack, tray pack, in oxygenated water (wet pack) and depurated samples in wet pack. It was found that the packaging in l kg lots in 200 gauge polythene bags with oxygen at a temperature of 20°C could keep them live for 4 days. In tray pack without oxygen and water they can be kept alive for 3 days at 20°C. Temperature seems to be the critical factor in the transportation of live clams. At room temperature both dry and wet pack can be kept for 24 h only. Depuration technique does not appear to be useful in prolonging the storage life of clams in live condition as percentage mortality is more at 48 h both at 20°C and room temperature compared to the non-depurated samples.

Change in quality of different variety of fish during long distance transportation

A study was conducted to investigate the quality of iced fish of different species during long distance transportation. Total bacterial counts showed different species to show different quality deterioration under similar handling conditions.

Optical emission spectroscopy of the plasma during sputter deposition of YBCO films for microwave applications

YBCO thin films are currently used in several HTS-based electronics applications. The performance of devices, which may include microwave passive components (filters, resonators), grain boundary junctions or spintronic multilayer structures, is determined by film quality, which in turn depends on the deposition technology used and growth parameters. We report on results from nonintrusive Optical Emission Spectroscopy of the plasma during YBCO thin film deposition in a high-pressure on-axis sputtering system under different conditions, including small trace gas additions to the sputtering gas. We correlate these results with the compositional and structural changes which affect the DC and microwave properties of YBCO films. Film morphology, composition, structure and in- and out-of-plane orientation were assessed; T, and microwave surface resistance measurements were made using inductive and resonator techniques. Comparison was made with films sputtered in an off-axis 2-opposing magnetron system.

Bulk packages for storage and transportation of salted and dried fish

The effect of bulk packaging on the storage of salted and dried fish was studied at ambient conditions. Four different packaging systems were tried, among which gusseted type high density polyethylene woven sacks having either circular loom or traditional loom laminated with 100 gauge low density polyethylene were found to be best suited for dry fish packaging as they could withstand the hazards of handling, transportation and storage.

Individual grain boundary properties and overall performance of metal-organic-deposition coated conductors

We have investigated single grain boundaries (GBs) isolated in coated conductors produced by Metal-Organic Deposition (MOD). When a magnetic field is swept in the film plane, an angle-dependent crossover from boundary to grain limited critical current density Jc is found. In the force-free orientation, even at fields as high as 8 T, the GBs still limit Jc. We deduce that this effect is a direct consequence of GB meandering. We have employed these single GB results to explain the dependence of Jc of polycrystalline tracks on their width: in-plane measurements become flatter as the tracks are narrowed down. This result is consistent with the stronger GB limitation at field configurations close to force-free found from the isolated boundaries. Our study shows that for certain geometries even at high fields the effect of GBs cannot be neglected.

Gas-phase production of multifunctional composite nanoparticles by photoinduced chemical vapor deposition

As these results indicate, photo-CVD coating is a robust process that allows for the creation of core-shell nanoparticles. In the present work we demonstrated that photo-CVD can effectively coat Fe2O3 particles with silica for purposes of biological applications. TDMA results combined with TEM images indicate that all particles are effectively coated and that particle coating thicknesses can be tuned to desired thickness depending on the application. In addition, the ability to vary coating properties and to coat high concentrations of particles makes this technique of interest for industrial production where uniform properties are needed for large quantities of particles [2]. Copyright © 2010 by ASME.

Implications of local lifecycle analyses and low carbon fuel standard design on gasohol transportation fuels

State and regional policies, such as low carbon fuel standards (LCFSs), increasingly mandate that transportation fuels be examined according to their greenhouse gas (GHG) emissions. We investigate whether such policies benefit from determining fuel carbon intensities (FCIs) locally to account for variations in fuel production and to stimulate improvements in FCI. In this study, we examine the FCI of transportation fuels on a lifecycle basis within a specific state, Minnesota, and compare the results to FCIs using national averages. Using data compiled from 18 refineries over an 11-year period, we find that ethanol production is highly variable, resulting in a 42% difference between carbon intensities. Historical data suggests that lower FCIs are possible through incremental improvements in refining efficiency and the use of biomass for processing heat. Stochastic modeling of the corn ethanol FCI shows that gains in certainty due to knowledge of specific refinery inputs are overwhelmed by uncertainty in parameters external to the refiner, including impacts of fertilization and land use change. The LCA results are incorporated into multiple policy scenarios to demonstrate the effect of policy configurations on the use of alternative fuels. These results provide a contrast between volumetric mandates and LCFSs. © 2011 Elsevier Ltd.