Uma contribuição para a medição de distorções harmônicas e inter-harmônicas em instalações de geração fotovoltaica

Dissertação (mestrado)— Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2015.

Forecasting exchange rates in the presence of instabilities

Many exchange rate papers articulate the view that instabilities constitute a major impediment to exchange rate predictability. In this thesis we implement Bayesian and other techniques to account for such instabilities, and examine some of the main obstacles to exchange rate models' predictive ability. We first consider in Chapter 2 a time-varying parameter model in which fluctuations in exchange rates are related to short-term nominal interest rates ensuing from monetary policy rules, such as Taylor rules. Unlike the existing exchange rate studies, the parameters of our Taylor rules are allowed to change over time, in light of the widespread evidence of shifts in fundamentals - for example in the aftermath of the Global Financial Crisis. Focusing on quarterly data frequency from the crisis, we detect forecast improvements upon a random walk (RW) benchmark for at least half, and for as many as seven out of 10, of the currencies considered. Results are stronger when we allow the time-varying parameters of the Taylor rules to differ between countries. In Chapter 3 we look closely at the role of time-variation in parameters and other sources of uncertainty in hindering exchange rate models' predictive power. We apply a Bayesian setup that incorporates the notion that the relevant set of exchange rate determinants and their corresponding coefficients, change over time. Using statistical and economic measures of performance, we first find that predictive models which allow for sudden, rather than smooth, changes in the coefficients yield significant forecast improvements and economic gains at horizons beyond 1-month. At shorter horizons, however, our methods fail to forecast better than the RW. And we identify uncertainty in coefficients' estimation and uncertainty about the precise degree of coefficients variability to incorporate in the models, as the main factors obstructing predictive ability. Chapter 4 focus on the problem of the time-varying predictive ability of economic fundamentals for exchange rates. It uses bootstrap-based methods to uncover the time-specific conditioning information for predicting fluctuations in exchange rates. Employing several metrics for statistical and economic evaluation of forecasting performance, we find that our approach based on pre-selecting and validating fundamentals across bootstrap replications generates more accurate forecasts than the RW. The approach, known as bumping, robustly reveals parsimonious models with out-of-sample predictive power at 1-month horizon; and outperforms alternative methods, including Bayesian, bagging, and standard forecast combinations. Chapter 5 exploits the predictive content of daily commodity prices for monthly commodity-currency exchange rates. It builds on the idea that the effect of daily commodity price fluctuations on commodity currencies is short-lived, and therefore harder to pin down at low frequencies. Using MIxed DAta Sampling (MIDAS) models, and Bayesian estimation methods to account for time-variation in predictive ability, the chapter demonstrates the usefulness of suitably exploiting such short-lived effects in improving exchange rate forecasts. It further shows that the usual low-frequency predictors, such as money supplies and interest rates differentials, typically receive little support from the data at monthly frequency, whereas MIDAS models featuring daily commodity prices are highly likely. The chapter also introduces the random walk Metropolis-Hastings technique as a new tool to estimate MIDAS regressions.

Phylodynamic modelling of foot-and-mouth disease virus sequence data

The under-reporting of cases of infectious diseases is a substantial impediment to the control and management of infectious diseases in both epidemic and endemic contexts. Information about infectious disease dynamics can be recovered from sequence data using time-varying coalescent approaches, and phylodynamic models have been developed in order to reconstruct demographic changes of the numbers of infected hosts through time. In this study I have demonstrated the general concordance between empirically observed epidemiological incidence data and viral demography inferred through analysis of foot-and-mouth disease virus VP1 coding sequences belonging to the CATHAY topotype over large temporal and spatial scales. However a more precise and robust relationship between the effective population size (

Explaining dinophysis cf. acuminata abundance in Antifer (Normandy, France) using dynamic linear regression

Classical regression analysis can be used to model time series. However, the assumption that model parameters are constant over time is not necessarily adapted to the data. In phytoplankton ecology, the relevance of time-varying parameter values has been shown using a dynamic linear regression model (DLRM). DLRMs, belonging to the class of Bayesian dynamic models, assume the existence of a non-observable time series of model parameters, which are estimated on-line, i.e. after each observation. The aim of this paper was to show how DLRM results could be used to explain variation of a time series of phytoplankton abundance. We applied DLRM to daily concentrations of Dinophysis cf. acuminata, determined in Antifer harbour (French coast of the English Channel), along with physical and chemical covariates (e.g. wind velocity, nutrient concentrations). A single model was built using 1989 and 1990 data, and then applied separately to each year. Equivalent static regression models were investigated for the purpose of comparison. Results showed that most of the Dinophysis cf. acuminata concentration variability was explained by the configuration of the sampling site, the wind regime and tide residual flow. Moreover, the relationships of these factors with the concentration of the microalga varied with time, a fact that could not be detected with static regression. Application of dynamic models to phytoplankton time series, especially in a monitoring context, is discussed.

Essays on optimal fiscal and monetary policies

Cette thèse se compose de trois articles sur les politiques budgétaires et monétaires optimales. Dans le premier article, J'étudie la détermination conjointe de la politique budgétaire et monétaire optimale dans un cadre néo-keynésien avec les marchés du travail frictionnels, de la monnaie et avec distortion des taux d'imposition du revenu du travail. Dans le premier article, je trouve que lorsque le pouvoir de négociation des travailleurs est faible, la politique Ramsey-optimale appelle à un taux optimal d'inflation annuel significativement plus élevé, au-delà de 9.5%, qui est aussi très volatile, au-delà de 7.4%. Le gouvernement Ramsey utilise l'inflation pour induire des fluctuations efficaces dans les marchés du travail, malgré le fait que l'évolution des prix est coûteuse et malgré la présence de la fiscalité du travail variant dans le temps. Les résultats quantitatifs montrent clairement que le planificateur s'appuie plus fortement sur l'inflation, pas sur l'impôts, pour lisser les distorsions dans l'économie au cours du cycle économique. En effet, il ya un compromis tout à fait clair entre le taux optimal de l'inflation et sa volatilité et le taux d'impôt sur le revenu optimal et sa variabilité. Le plus faible est le degré de rigidité des prix, le plus élevé sont le taux d'inflation optimal et la volatilité de l'inflation et le plus faible sont le taux d'impôt optimal sur le revenu et la volatilité de l'impôt sur le revenu. Pour dix fois plus petit degré de rigidité des prix, le taux d'inflation optimal et sa volatilité augmentent remarquablement, plus de 58% et 10%, respectivement, et le taux d'impôt optimal sur le revenu et sa volatilité déclinent de façon spectaculaire. Ces résultats sont d'une grande importance étant donné que dans les modèles frictionnels du marché du travail sans politique budgétaire et monnaie, ou dans les Nouveaux cadres keynésien même avec un riche éventail de rigidités réelles et nominales et un minuscule degré de rigidité des prix, la stabilité des prix semble être l'objectif central de la politique monétaire optimale. En l'absence de politique budgétaire et la demande de monnaie, le taux d'inflation optimal tombe très proche de zéro, avec une volatilité environ 97 pour cent moins, compatible avec la littérature. Dans le deuxième article, je montre comment les résultats quantitatifs impliquent que le pouvoir de négociation des travailleurs et les coûts de l'aide sociale de règles monétaires sont liées négativement. Autrement dit, le plus faible est le pouvoir de négociation des travailleurs, le plus grand sont les coûts sociaux des règles de politique monétaire. Toutefois, dans un contraste saisissant par rapport à la littérature, les règles qui régissent à la production et à l'étroitesse du marché du travail entraînent des coûts de bien-être considérablement plus faible que la règle de ciblage de l'inflation. C'est en particulier le cas pour la règle qui répond à l'étroitesse du marché du travail. Les coûts de l'aide sociale aussi baisse remarquablement en augmentant la taille du coefficient de production dans les règles monétaires. Mes résultats indiquent qu'en augmentant le pouvoir de négociation du travailleur au niveau Hosios ou plus, les coûts de l'aide sociale des trois règles monétaires diminuent significativement et la réponse à la production ou à la étroitesse du marché du travail n'entraîne plus une baisse des coûts de bien-être moindre que la règle de ciblage de l'inflation, qui est en ligne avec la littérature existante. Dans le troisième article, je montre d'abord que la règle Friedman dans un modèle monétaire avec une contrainte de type cash-in-advance pour les entreprises n’est pas optimale lorsque le gouvernement pour financer ses dépenses a accès à des taxes à distorsion sur la consommation. Je soutiens donc que, la règle Friedman en présence de ces taxes à distorsion est optimale si nous supposons un modèle avec travaie raw-efficace où seule le travaie raw est soumis à la contrainte de type cash-in-advance et la fonction d'utilité est homothétique dans deux types de main-d'oeuvre et séparable dans la consommation. Lorsque la fonction de production présente des rendements constants à l'échelle, contrairement au modèle des produits de trésorerie de crédit que les prix de ces deux produits sont les mêmes, la règle Friedman est optimal même lorsque les taux de salaire sont différents. Si la fonction de production des rendements d'échelle croissant ou decroissant, pour avoir l'optimalité de la règle Friedman, les taux de salaire doivent être égales.

Avaliação espectrofotométrica do manchamento de resinas odontológicas contendo nanopartículas

Composite resins have been subjected to structural modifications aiming at improved optical and mechanical properties. The present study consisted in an in vitro evaluation of the staining behavior of two nanohybrid resins (NH1 and NH2), a nanoparticulated resin (NP) and a microhybrid resin (MH). Samples of these materials were prepared and immersed in commonly ingested drinks, i.e., coffee, red wine and acai berry for periods of time varying from 1 to 60 days. Cylindrical samples of each resin were shaped using a metallic die and polymerized during 30 s both on the bottom and top of its disk. All samples were polished and immersed in the staining solutions. After 24 hours, three samples of each resin immersed in each solution were removed and placed in a spectrofotome ter for analysis. To that end, the samples were previously diluted in HCl at 50%. Tukey tests were carried out in the statistical analysis of the results. The results revealed that there was a clear difference in the staining behavior of each material. The nanoparticulated resin did not show better color stability compared to the microhybrid resin. Moreover, all resins stained with time. The degree of staining decreased in the sequence nanoparticulated, microhybrid, nanohybrid MH2 and MH1. Wine was the most aggressive drink followed by coffee and acai berry. SEM and image analysis revealed significant porosity on the surface of MH resin and relatively large pores on a NP sample. The NH2 resin was characterized by homogeneous dispersion of particles and limited porosity. Finally, the NH1 resin depicted the lowest porosity level. The results revealed that staining is likely related to the concentration of inorganic pa rticles and surface porosity

Wave impedance selection for passivity-based bilateral teleoperation

When a task must be executed in a remote or dangerous environment, teleoperation systems may be employed to extend the influence of the human operator. In the case of manipulation tasks, haptic feedback of the forces experienced by the remote (slave) system is often highly useful in improving an operator's ability to perform effectively. In many of these cases (especially teleoperation over the internet and ground-to-space teleoperation), substantial communication latency exists in the control loop and has the strong tendency to cause instability of the system. The first viable solution to this problem in the literature was based on a scattering/wave transformation from transmission line theory. This wave transformation requires the designer to select a wave impedance parameter appropriate to the teleoperation system. It is widely recognized that a small value of wave impedance is well suited to free motion and a large value is preferable for contact tasks. Beyond this basic observation, however, very little guidance exists in the literature regarding the selection of an appropriate value. Moreover, prior research on impedance selection generally fails to account for the fact that in any realistic contact task there will simultaneously exist contact considerations (perpendicular to the surface of contact) and quasi-free-motion considerations (parallel to the surface of contact). The primary contribution of the present work is to introduce an approximate linearized optimum for the choice of wave impedance and to apply this quasi-optimal choice to the Cartesian reality of such a contact task, in which it cannot be expected that a given joint will be either perfectly normal to or perfectly parallel to the motion constraint. The proposed scheme selects a wave impedance matrix that is appropriate to the conditions encountered by the manipulator. This choice may be implemented as a static wave impedance value or as a time-varying choice updated according to the instantaneous conditions encountered. A Lyapunov-like analysis is presented demonstrating that time variation in wave impedance will not violate the passivity of the system. Experimental trials, both in simulation and on a haptic feedback device, are presented validating the technique. Consideration is also given to the case of an uncertain environment, in which an a priori impedance choice may not be possible.

The transformed-stationary approach: a generic and simplified methodology for non-stationary extreme value analysis

Statistical approaches to study extreme events require, by definition, long time series of data. In many scientific disciplines, these series are often subject to variations at different temporal scales that affect the frequency and intensity of their extremes. Therefore, the assumption of stationarity is violated and alternative methods to conventional stationary extreme value analysis (EVA) must be adopted. Using the example of environmental variables subject to climate change, in this study we introduce the transformed-stationary (TS) methodology for non-stationary EVA. This approach consists of (i) transforming a non-stationary time series into a stationary one, to which the stationary EVA theory can be applied, and (ii) reverse transforming the result into a non-stationary extreme value distribution. As a transformation, we propose and discuss a simple time-varying normalization of the signal and show that it enables a comprehensive formulation of non-stationary generalized extreme value (GEV) and generalized Pareto distribution (GPD) models with a constant shape parameter. A validation of the methodology is carried out on time series of significant wave height, residual water level, and river discharge, which show varying degrees of long-term and seasonal variability. The results from the proposed approach are comparable with the results from (a) a stationary EVA on quasi-stationary slices of non-stationary series and (b) the established method for non-stationary EVA. However, the proposed technique comes with advantages in both cases. For example, in contrast to (a), the proposed technique uses the whole time horizon of the series for the estimation of the extremes, allowing for a more accurate estimation of large return levels. Furthermore, with respect to (b), it decouples the detection of non-stationary patterns from the fitting of the extreme value distribution. As a result, the steps of the analysis are simplified and intermediate diagnostics are possible. In particular, the transformation can be carried out by means of simple statistical techniques such as low-pass filters based on the running mean and the standard deviation, and the fitting procedure is a stationary one with a few degrees of freedom and is easy to implement and control. An open-source MAT-LAB toolbox has been developed to cover this methodology, which is available at https://github.com/menta78/tsEva/(Mentaschi et al., 2016).

Sintonia automática de controladores PID: uma abordagem neuro - genética

Dissertação de dout. em Electrónica e Computação, Faculdade de Ciências e Tecnologia, Univ. do Algarve, 2004

Evaluating tests for convergence of economic series using Monte Carlo methods with an application to real GDP's per head.

Doutoramento em Economia.

Computer Aided Design Algorithmic Technique for Very Large Scale Integrated Circuit Design and Smart Home Embedded System Design

To tackle the challenges at circuit level and system level VLSI and embedded system design, this dissertation proposes various novel algorithms to explore the efficient solutions. At the circuit level, a new reliability-driven minimum cost Steiner routing and layer assignment scheme is proposed, and the first transceiver insertion algorithmic framework for the optical interconnect is proposed. At the system level, a reliability-driven task scheduling scheme for multiprocessor real-time embedded systems, which optimizes system energy consumption under stochastic fault occurrences, is proposed. The embedded system design is also widely used in the smart home area for improving health, wellbeing and quality of life. The proposed scheduling scheme for multiprocessor embedded systems is hence extended to handle the energy consumption scheduling issues for smart homes. The extended scheme can arrange the household appliances for operation to minimize monetary expense of a customer based on the time-varying pricing model.

Volatility transmission between stock and exchange-rate markets: A connectedness analysis

This paper empirically investigates volatility transmission among stock and foreign exchange markets in seven major world economies during the period July 1988 to January 2015. To this end, we first perform a static and dynamic analysis to measure the total volatility connectedness in the entire period (the system-wide approach) using a framework recently proposed by Diebold and Yilmaz (2014). Second, we make use of a dynamic analysis to evaluate the net directional connectedness for each market. To gain further insights, we examine the time-varying behaviour of net pair-wise directional connectedness during the financial turmoil periods experienced in the sample period Our results suggest that slightly more than half of the total variance of the forecast errors is explained by shocks across markets rather than by idiosyncratic shocks. Furthermore, we find that volatility connectedness varies over time, with a surge during periods of increasing economic and financial instability.

Pairs trading in the UK equity market: risk and return

In this paper, we provide the first comprehensive UK evidence on the profitability of the pairs trading strategy. Evidence suggests that the strategy performs well in crisis periods, so we control for both risk and liquidity to assess performance. To evaluate the effect of market frictions on the strategy, we use several estimates of transaction costs. We also present evidence on the performance of the strategy in different economic and market states. Our results show that pairs trading portfolios typically have little exposure to known equity risk factors such as market, size, value, momentum and reversal. However, a model controlling for risk and liquidity explains a far larger proportion of returns. Incorporating different assumptions about bid-ask spreads leads to reductions in performance estimates. When we allow for time-varying risk exposures, conditioned on the contemporaneous equity market return, risk-adjusted returns are generally not significantly different from zero.

The conditional performance of euro bond funds: evidence from Portugal during the debt crisis

This paper evaluates the performance of a survivorship bias-free data set of Portuguese funds investing in Euro-denominated bonds by using conditional models that consider the public information available to investors when the returns are generated. We find that bond funds underperform the market significantly and by an economically relevant magnitude. This underperformance cannot be explained by the expenses they charge. Our findings support the use of conditional performance evaluation models, since we find strong evidence of both time-varying risk and performance, dependent on the slope of the term structure and the inverse relative wealth variables. We also show that survivorship bias has a significant impact on performance estimates. Furthermore, during the European debt crisis, bond fund managers performed significantly better than in non-crisis periods and were able to achieve neutral performance. This improved performance throughout the crisis seems to be related to changes in funds’ investment styles.

Autonomous formation flying: unified control and collision avoidance methods for close manoeuvring spacecraft

The idea of spacecraft formations, flying in tight configurations with maximum baselines of a few hundred meters in low-Earth orbits, has generated widespread interest over the last several years. Nevertheless, controlling the movement of spacecraft in formation poses difficulties, such as in-orbit high-computing demand and collision avoidance capabilities, which escalate as the number of units in the formation is increased and complicated nonlinear effects are imposed to the dynamics, together with uncertainty which may arise from the lack of knowledge of system parameters. These requirements have led to the need of reliable linear and nonlinear controllers in terms of relative and absolute dynamics. The objective of this thesis is, therefore, to introduce new control methods to allow spacecraft in formation, with circular/elliptical reference orbits, to efficiently execute safe autonomous manoeuvres. These controllers distinguish from the bulk of literature in that they merge guidance laws never applied before to spacecraft formation flying and collision avoidance capacities into a single control strategy. For this purpose, three control schemes are presented: linear optimal regulation, linear optimal estimation and adaptive nonlinear control. In general terms, the proposed control approaches command the dynamical performance of one or several followers with respect to a leader to asymptotically track a time-varying nominal trajectory (TVNT), while the threat of collision between the followers is reduced by repelling accelerations obtained from the collision avoidance scheme during the periods of closest proximity. Linear optimal regulation is achieved through a Riccati-based tracking controller. Within this control strategy, the controller provides guidance and tracking toward a desired TVNT, optimizing fuel consumption by Riccati procedure using a non-infinite cost function defined in terms of the desired TVNT, while repelling accelerations generated from the CAS will ensure evasive actions between the elements of the formation. The relative dynamics model, suitable for circular and eccentric low-Earth reference orbits, is based on the Tschauner and Hempel equations, and includes a control input and a nonlinear term corresponding to the CAS repelling accelerations. Linear optimal estimation is built on the forward-in-time separation principle. This controller encompasses two stages: regulation and estimation. The first stage requires the design of a full state feedback controller using the state vector reconstructed by means of the estimator. The second stage requires the design of an additional dynamical system, the estimator, to obtain the states which cannot be measured in order to approximately reconstruct the full state vector. Then, the separation principle states that an observer built for a known input can also be used to estimate the state of the system and to generate the control input. This allows the design of the observer and the feedback independently, by exploiting the advantages of linear quadratic regulator theory, in order to estimate the states of a dynamical system with model and sensor uncertainty. The relative dynamics is described with the linear system used in the previous controller, with a control input and nonlinearities entering via the repelling accelerations from the CAS during collision avoidance events. Moreover, sensor uncertainty is added to the control process by considering carrier-phase differential GPS (CDGPS) velocity measurement error. An adaptive control law capable of delivering superior closed-loop performance when compared to the certainty-equivalence (CE) adaptive controllers is finally presented. A novel noncertainty-equivalence controller based on the Immersion and Invariance paradigm for close-manoeuvring spacecraft formation flying in both circular and elliptical low-Earth reference orbits is introduced. The proposed control scheme achieves stabilization by immersing the plant dynamics into a target dynamical system (or manifold) that captures the desired dynamical behaviour. They key feature of this methodology is the addition of a new term to the classical certainty-equivalence control approach that, in conjunction with the parameter update law, is designed to achieve adaptive stabilization. This parameter has the ultimate task of shaping the manifold into which the adaptive system is immersed. The performance of the controller is proven stable via a Lyapunov-based analysis and Barbalat’s lemma. In order to evaluate the design of the controllers, test cases based on the physical and orbital features of the Prototype Research Instruments and Space Mission Technology Advancement (PRISMA) are implemented, extending the number of elements in the formation into scenarios with reconfigurations and on-orbit position switching in elliptical low-Earth reference orbits. An extensive analysis and comparison of the performance of the controllers in terms of total Δv and fuel consumption, with and without the effects of the CAS, is presented. These results show that the three proposed controllers allow the followers to asymptotically track the desired nominal trajectory and, additionally, those simulations including CAS show an effective decrease of collision risk during the performance of the manoeuvre.