Individual differences in predicting occupational success: The effect of population heterogeneity

Using a sample of 339 university graduates from the University of Alicante (Spain) three years after completion of their studies, we studied the relationships between general intelligence (GI), personality traits, emotional intelligence (EI), academic performance, and occupational attainment and compared the results of conventional regression analysis with the results obtained from applying regression mixture models. The results reveal the influence of unobserved population heterogeneity (latent class) on the relationship between predictors and criteria and the improvement in the prediction obtained from applying regression mixture models compared to applying a conventional regression model.

Comparison of the predictability of refractive cylinder correction by laser in situ keratomileusis in eyes with low or high ocular residual astigmatism

Purpose: To compare the manifest refractive cylinder (MRC) predictability of myopic astigmatism laser in situ keratomileusis (LASIK) between eyes with low and high ocular residual astigmatism (ORA). Setting: London Vision Clinic, London, United Kingdom. Design: Retrospective case study. Methods: The ORA was considered the vector difference between the MRC and the corneal astigmatism. The index of success (IoS), difference vector ÷ MRC, was analyzed for different groups as follows: stage 1, low ORA (ORA ÷ MRC <1), high ORA (ORA ÷ MRC ≥1); stage 2, low ORA group reduced to match the high ORA group for MRC; stage 3, grouped by ORA magnitude with low ORA (<0.50 diopters [D]), mid ORA (0.50 to 1.24 D), and high ORA (≥1.25 D); stage 4, high ORA group subdivided into low (<0.75 D) and high (≥0.75 D) corneal astigmatism. Results: For stage 1, the mean preoperative MRC and mean IoS were −1.32 D ± 0.65 (SD) (range −0.55 to −3.77 D) and 0.27, respectively, for low ORA and −0.79 ± 0.20 D (range −0.56 to −2.05 D) and 0.37, respectively, for high ORA. For stage 2, the mean IoS increased to 0.32 for low ORA. For stage 3, the mean IoS was 0.28, 0.29, and 0.31 for low ORA, mid ORA, and high ORA, respectively. For stage 4, the mean IoS was 0.20 for high ORA/low corneal astigmatism and 0.35 for high ORA/high corneal astigmatism. Conclusions: The MRC predictability was slightly worse in eyes with high ORA when grouped by the ORA ÷ MRC. Matching for the MRC and grouping by ORA magnitude resulted in similar predictability; however, eyes with high ORA and high corneal astigmatism were less predictable.

Effects of Dialogic Reading in the Improvement of Reading Comprehension in Students of Primary Education

Reading is an essential factor for success at school that requires certain skills and strategies of great complexity rarely taught in schools. Verbalization of comprehension strategies can be considered an effective measure in learning to read. The purpose of this study was to analyze the effect of a program of teaching reading strategies implemented through interactive dialogic reading groups in the learning of reading comprehension. A quasi-experimental comparison with pretest and posttest design between groups was used. A sample of 355 participants aged between 8 and 9 years aged was used. The results weigh the potential value of the program and support the development of teaching models that integrate dialogic reading practices as they facilitate learning of reading comprehension.

Surface growth for molten silicon infiltration into carbon millimeter-sized channels: Lattice–Boltzmann simulations, experiments and models

The process of liquid silicon infiltration is investigated for channels with radii from 0.25 to 0.75 [mm] drilled in compact carbon preforms. The advantage of this setup is that the study of the phenomenon results to be simplified. For comparison purposes, attempts are made in order to work out a framework for evaluating the accuracy of simulations. The approach relies on dimensionless numbers involving the properties of the surface reaction. It turns out that complex hydrodynamic behavior derived from second Newton law can be made consistent with Lattice-Boltzmann simulations. The experiments give clear evidence that the growth of silicon carbide proceeds in two different stages and basic mechanisms are highlighted. Lattice-Boltzmann simulations prove to be an effective tool for the description of the growing phase. Namely, essential experimental constraints can be implemented. As a result, the existing models are useful to gain more insight on the process of reactive infiltration into porous media in the first stage of penetration, i.e. up to pore closure because of surface growth. A way allowing to implement the resistance from chemical reaction in Darcy law is also proposed.

The effects of economic crises on tourism success: an integrated model

This paper provides a theoretical model of the influence of economic crises on tourism destination performance. It discusses the temporary and permanent effects of economic crises on the global market shares of tourism destinations through a series of potential transmission mechanisms based on the main economic competitiveness determinants identified in the literature. The proposed model explains the non-neutrality of economic shocks in tourism competitiveness. The model is tested on Spain's tourism industry, which is among the leaders of the global tourism sector, for the period 1970–2013 using non-linear econometric techniques. The empirical analysis confirms that the proposed model is appropriate for explaining the changes in the market positions caused by the economic crises.

Determinants of Farm Labour Use: A Comparison between Ireland and Italy. Factor Markets Working Documents No. 60, August 2013

This paper examines the effect of the decoupling of farm direct payments upon the off-farm labour supply decisions of farmers in both Ireland and Italy, using panel data from the Farm Business Survey (REA) and FADN database covering the period from 2002 to 2009 to model these decisions. Drawing from the conceptual agricultural household model, the authors hypothesise that the decoupling of direct payments led to an increase in off-farm labour activity despite some competing factors. This hypothesis rests largely upon the argument that the effects of changes in relative wages have dominated other factors. At a micro level, the decoupling-induced decline in the farm wage relative to the non-farm wage ought to have provoked a greater incentive for off-farm labour supply. The main known competing argument is that decoupling introduced a new source of non-labour income i.e. a wealth effect. This may in turn have suppressed or eliminated the likelihood of increased off-farm labour supply for some farmers. For the purposes of comparative analysis, the Italian model utilises the data from the REA database instead of the FADN as the latter has a less than satisfactory coverage of labour issues. Both models are developed at a national level. The paper draws from the literature on female labour supply and uses a sample selection corrected ordinary least squares model to examine both the decisions of off-farm work participation and the decisions regarding the amount of time spent working off-farm. The preliminary results indicate that decoupling has not had a significant impact on off-farm labour supply in the case of Ireland but there appears to be a significantly negative relationship in the Italian case. It still remains the case in both countries that the wealth of the farmer is negatively correlated with the likelihood of off-farm employment.

Eurozone Crisis and Social Models: What We Can Learn from Italy and Spain. CES Papers - Open Forum #20, 2013-2014

This paper considers the role of social model features in the economic performance of Italy and Spain during the run-up to the Eurozone crisis, as well as the consequences of that crisis, in turn, for the two countries social models. It takes issue with the prevailing view - what I refer to as the “competitiveness thesis” - which attributes the debtor status of the two countries to a lack of competitive capacity rooted in social model features. This competitiveness thesis has been key in justifying the “liberalization plus austerity” measures that European institutions have demanded in return for financial support for Italy and Spain at critical points during the crisis. The paper challenges this prevailing wisdom. First, it reviews the characteristics of the Italian and Spanish social models and their evolution in the period prior to the crisis, revealing a far more complex, dynamic and differentiated picture than is given in the political economy literature. Second, the paper considers various ways in which social model characteristics are said to have contributed to the Eurozone crisis, finding such explanations wanting. Italy and Spain ́s debtor status was primarily the result of much broader dynamics in the Euro- zone, including capital flows from richer to poorer countries that affected economic demand, with social model features playing, at most, an ancillary role. More aggressive reforms responding to EU demands in Spain may have increased the long term social and economic costs of the crisis, whereas the political stalemate that slowed such reforms in Italy may have paradoxically mitigated these costs. The comparison of the two countries thus suggests that, in the absence of broader macro-institutional reform of the Eurozone, compliance with EU dictates may have had perverse effects.

A multimodal tablet-based interface for designing and reviewing 3D engineering models

The ability to view and interact with 3D models has been happening for a long time. However, vision-based 3D modeling has only seen limited success in applications, as it faces many technical challenges. Hand-held mobile devices have changed the way we interact with virtual reality environments. Their high mobility and technical features, such as inertial sensors, cameras and fast processors, are especially attractive for advancing the state of the art in virtual reality systems. Also, their ubiquity and fast Internet connection open a path to distributed and collaborative development. However, such path has not been fully explored in many domains. VR systems for real world engineering contexts are still difficult to use, especially when geographically dispersed engineering teams need to collaboratively visualize and review 3D CAD models. Another challenge is the ability to rendering these environments at the required interactive rates and with high fidelity. In this document it is presented a virtual reality system mobile for visualization, navigation and reviewing large scale 3D CAD models, held under the CEDAR (Collaborative Engineering Design and Review) project. It’s focused on interaction using different navigation modes. The system uses the mobile device's inertial sensors and camera to allow users to navigate through large scale models. IT professionals, architects, civil engineers and oil industry experts were involved in a qualitative assessment of the CEDAR system, in the form of direct user interaction with the prototypes and audio-recorded interviews about the prototypes. The lessons learned are valuable and are presented on this document. Subsequently it was prepared a quantitative study on the different navigation modes to analyze the best mode to use it in a given situation.

Field-based models for low speed switched reluctance machine designs

Trabalho apresentado na Conferência CPE-POWERENG 2016, 29 junho a 01 de julho 2016, Bydgoszcz, Polónia

Approaches for the vaccination and treatment of Neospora caninum infections in mice and ruminant models.

Neospora caninum is a leading cause of abortion in cattle, and is thus an important veterinary health problem of high economic significance. Vaccination has been considered a viable strategy to prevent bovine neosporosis. Different approaches have been investigated, and to date the most promising results have been achieved with live-attenuated vaccines. Subunit vaccines have also been studied, and most of them represented components that are functionally involved in (i) the physical interaction between the parasite and its host cell during invasion or (ii) tachyzoite-to-bradyzoite stage conversion. Drugs have been considered as an option to limit the effects of vertical transmission of N. caninum. Promising results with a small panel of compounds in small laboratory animal models indicate the potential value of a chemotherapeutical approach for the prevention of neosporosis in ruminants. For both, vaccines and drugs, the key for success in preventing vertical transmission lies in the application of bioactive compounds that limit parasite proliferation and dissemination, without endangering the developing fetus not only during an exogenous acute infection but also during recrudescence of a chronic infection. In this review, the current status of vaccine and drug development is presented and novel strategies against neosporosis are discussed.

Benchmarking analogue models of brittle thrust wedges

We performed a quantitative comparison of brittle thrust wedge experiments to evaluate the variability among analogue models and to appraise the reproducibility and limits of model interpretation. Fifteen analogue modeling laboratories participated in this benchmark initiative. Each laboratory received a shipment of the same type of quartz and corundum sand and all laboratories adhered to a stringent model building protocol and used the same type of foil to cover base and sidewalls of the sandbox. Sieve structure, sifting height, filling rate, and details on off-scraping of excess sand followed prescribed procedures. Our analogue benchmark shows that even for simple plane-strain experiments with prescribed stringent model construction techniques, quantitative model results show variability, most notably for surface slope, thrust spacing and number of forward and backthrusts. One of the sources of the variability in model results is related to slight variations in how sand is deposited in the sandbox. Small changes in sifting height, sifting rate, and scraping will result in slightly heterogeneous material bulk densities, which will affect the mechanical properties of the sand, and will result in lateral and vertical differences in peak and boundary friction angles, as well as cohesion values once the model is constructed. Initial variations in basal friction are inferred to play the most important role in causing model variability. Our comparison shows that the human factor plays a decisive role, and even when one modeler repeats the same experiment, quantitative model results still show variability. Our observations highlight the limits of up-scaling quantitative analogue model results to nature or for making comparisons with numerical models. The frictional behavior of sand is highly sensitive to small variations in material state or experimental set-up, and hence, it will remain difficult to scale quantitative results such as number of thrusts, thrust spacing, and pop-up width from model to nature.

Comparisons between analogue and numerical models of thrust wedge development

Analogue and finite element numerical models with frictional and viscous properties are used to model thrust wedge development. Comparison between model types yields valuable information about analogue model evolution, scaling laws and the relative strengths and limitations of the techniques. Both model types show a marked contrast in structural style between ‘frictional-viscous domains’ underlain by a thin viscous layer and purely ‘frictional domains’. Closely spaced thrusts form a narrow and highly asymmetric fold-and-thrust belt in the frictional domain, characterized by in-sequence propagation of forward thrusts. In contrast, the frictional-viscous domain shows a wide and low taper wedge and a thrust belt with a more symmetrical vergence, with both forward and back thrusts. The frictional-viscous domain numerical models show that the viscous layer initially simple shears as deformation propagates along it, while localized deformation resulting in the formation of a pop-up structure occurs in the overlying frictional layers. In both domains, thrust shear zones in the numerical model are generally steeper than the equivalent faults in the analogue model, because the finite element code uses a non-associated plasticity flow law. Nevertheless, the qualitative agreement between analogue and numerical models is encouraging. It shows that the continuum approximation used in numerical models can be used to model frictional materials, such as sand, provided caution is taken to properly scale the experiments, and some of the limitations are taken into account.

Age models and stable isotope record of sediment cores from the Atlantic Ocean

The high-resolution delta18O and delta13C records of benthic foraminifera from a 150,000-year long core from the Caribbean Sea indicate that there was generally high delta13C during glaciations and low delta13C during interglaciations. Due to its 1800-m sill depth, the properties of deep water in the Caribbean Sea are similar to those of middepth tropical Atlantic water. During interglaciations, the water filling the deep Caribbean Sea is an admixture of low delta13C Upper Circumpolar Water (UCPW) and high delta13C Upper North Atlantic Deep Water (UNADW). By contrast, only high delta13C UNADW enters during glaciations. Deep ocean circulation changes can influence atmospheric CO2 levels (Broecker and Takahashi, 1985; Boyle, 1988 doi:10.1029/JC093iC12p15701; Keir, 1988 doi:10.1029/PA003i004p00413; Broecker and Peng, 1989 doi:10.1029/GB003i003p00215). By comparing delta13C records of benthic foraminifera from cores lying in Southern Ocean Water, the Caribbean Sea, and at several other Atlantic Ocean sites, the thermohaline state of the Atlantic Ocean (how close it was to a full glacial or full interglacial configuration) is characterized. A continuum of circulation patterns between the glacial and interglacial extremes appears to have existed in the past. Subtracting the deep Pacific (~mean ocean water) delta13C record from the Caribbean delta13C record yields a record which describes large changes in the Atlantic Ocean thermohaline circulation. The delta13C difference varies as the vertical nutrient distribution changes. This new proxy record bears a striking resemblance to the 150,000-year-long atmospheric CO2 record (Barnola et al., 1987 doi:10.1038/329408a0). This favorable comparison between the new proxy record and the atmospheric CO2 record is consistent with Boyle's (1988a) model that vertical nutrient redistribution has driven large atmospheric CO2 changes in the past. Changes in the relative contribution of NADW and Pacific outflow water to the Southern Ocean are also consistent with Broecker and Peng's (1989) recent model for atmospheric CO2 changes.

A comparison of an estuary tide calculation by hydraulic model and computer /

Mode of access: Internet.