Stock boundaries of Parapenaeus longirostris (Lucas, 1846) populations in the Italian seas: Development of genomic 2b-RAD markers and biological variation analysis.

This thesis is developed in the contest of Ritmare project WP1, which main objective is the development of a sustainable fishery through the identification of populations boundaries in commercially important species in Italian Seas. Three main objectives are discussed in order to help reach the main purpose of identification of stock boundaries in Parapenaeus longirostris: 1 -Development of a representative sampling design for Italian seas; 2 -Evaluation of 2b-RAD protocol; 3 -Investigation of populations through biological data analysis. First of all we defined and accomplished a sampling design which properly represents all Italian seas. Then we used information and data about nursery areas distribution, abundance of populations and importance of P. longirostris in local fishery, to develop an experimental design that prioritize the most important areas to maximize the results with actual project funds. We introduced for the first time the use of 2b-RAD on this species, a genotyping method based on sequencing the uniform fragments produced by type IIB restriction endonucleases. Thanks to this method we were able to move from genetics to the more complex genomics. In order to proceed with 2b-RAD we performed several tests to identify the best DNA extraction kit and protocol and finally we were able to extract 192 high quality DNA extracts ready to be processed. We tested 2b-RAD with five samples and after high-throughput sequencing of libraries we used the software “Stacks” to analyze the sequences. We obtained positive results identifying a great number of SNP markers among the five samples. To guarantee a multidisciplinary approach we used the biological data associated to the collected samples to investigate differences between geographical samples. Such approach assures continuity with other project, for instance STOCKMED, which utilize a combination of molecular and biological analysis as well.

Identificazione di possibili unita' di stock di Anguilla anguilla mediante analisi microchimica e morfometrica degli otoliti

L’anguilla europea, è una specie eurialina catadroma con un complesso ciclo biologico: l’area di riproduzione, unica, si trova molto distante da quella di distribuzione. La specie necessita di una gestione dello stock a fini conservazionistici. Il problema è europeo: lo stock è unico, distribuito in Europa e nell’Africa settentrionale, si riproduce in Atlantico ed è panmittico. C’è preoccupazione per il declino del reclutamento e delle catture di adulti. Lo scopo del progetto è di individuare possibili unità di stock nella penisola italiana. La ricerca è basata sullo studio degli otoliti mediante analisi morfometrica e microchimica. I contorni degli otoliti sono sottoposti ad analisi ellittica di Fourier per individuare eventuali gruppi. Gli otoliti sono stati levigati per effettuare: letture d’età, indagini microstrutturali al SEM delle fasi larvali, analisi microchimiche LA-ICP-MS del nucleo, studiarne l’origine e valutare l’ambiente di sviluppo. Le indagini morfometriche mostrano evidenti pattern ontogenetici, ma non legati ocorrelati alla località, sesso o anno di nascita. Le indagini microstrutturali hanno evidenziano l’alto contenuto organico nucleare, un pattern comune di crescita ed eventi chiave delle fasi larvali, con una media di 212 anelli giornalieri. La microchimica rivela che le larve si sviluppano in acque salate fino alla metamorfosi, poi migrano verso acque meno salate. Le analisi su campioni nati nello stesso anno, evidenziano due gruppi: individui di rimonta naturale e individui di ripopolamento. I profili nucleo bordo evidenziano la permanenza a salinità intermedie degli adulti. L’attività di ricerca si è dimostrata proficua dal punto di vista tecnico con la messa a punto di protocolli innovativi e con forti ricadute sulla riduzione dei tempi e costi d’analisi. Il debole segnale di possibili unità di stock andrà verificato in futuro mediante analisi più dettagliate discriminando meglio la storia di ogni singolo individuo.

Coca cola hbc italia: Modello per il calcolo di inventory stock target e production cycles ottimali

Approccio unificato alla gestione e alla valutazione del planning in stabilimenti e magazzini, presso Coca Cola HBC Italia

Modelling, simulation and optimization of maintenance considerations on condition based maintenance

Globalization has increased the pressure on organizations and companies to operate in the most efficient and economic way. This tendency promotes that companies concentrate more and more on their core businesses, outsource less profitable departments and services to reduce costs. By contrast to earlier times, companies are highly specialized and have a low real net output ratio. For being able to provide the consumers with the right products, those companies have to collaborate with other suppliers and form large supply chains. An effect of large supply chains is the deficiency of high stocks and stockholding costs. This fact has lead to the rapid spread of Just-in-Time logistic concepts aimed minimizing stock by simultaneous high availability of products. Those concurring goals, minimizing stock by simultaneous high product availability, claim for high availability of the production systems in the way that an incoming order can immediately processed. Besides of design aspects and the quality of the production system, maintenance has a strong impact on production system availability. In the last decades, there has been many attempts to create maintenance models for availability optimization. Most of them concentrated on the availability aspect only without incorporating further aspects as logistics and profitability of the overall system. However, production system operator’s main intention is to optimize the profitability of the production system and not the availability of the production system. Thus, classic models, limited to represent and optimize maintenance strategies under the light of availability, fail. A novel approach, incorporating all financial impacting processes of and around a production system, is needed. The proposed model is subdivided into three parts, maintenance module, production module and connection module. This subdivision provides easy maintainability and simple extendability. Within those modules, all aspect of production process are modeled. Main part of the work lies in the extended maintenance and failure module that offers a representation of different maintenance strategies but also incorporates the effect of over-maintaining and failed maintenance (maintenance induced failures). Order release and seizing of the production system are modeled in the production part. Due to computational power limitation, it was not possible to run the simulation and the optimization with the fully developed production model. Thus, the production model was reduced to a black-box without higher degree of details.

Relevance of In-vitro Tests of Adhesive and Composite Dental Materials. A Review in 3 Parts. Part 2: Non-standardized tests of composite materials

Summary The first part of this review examined ISO approval requirements and in vitro testing. In the second part, non-standardized test methods for composite materials are presented and discussed. Physical tests are primarily described. Analyses of surface gloss and alterations, as well as aging simulations of dental materials are presented. Again, the importance of laboratory tests in determining clinical outcomes is evaluated. Differences in the measurement protocols of the various testing institutes and how these differences can in?uence the results are also discussed. Because there is no standardization of test protocols, the values determined by different institutes cannot be directly compared. However, the ranking of the tested materials should be the same if a valid protocol is applied by different institutes. The modulus of elasticity, the expansion after water sorption, and the polishability of the material are all clinically relevant, whereas factors measured by other test protocols may have no clinical correlation. The handling properties of the materials are highly dependent on operators' preferences. Therefore, no standard values can be given.

Relevance of in vitro tests of adhesive and composite dental materials, a review in 3 parts. Part 1: Approval requirements and standardized testing of composite materials according to ISO specifications

The first part of this three-part review on the relevance of laboratory testing of composites and adhesives deals with approval requirements for composite materials. We compare the in vivo and in vitro literature data and discuss the relevance of in vitro analyses. The standardized ISO protocols are presented, with a focus on the evaluation of physical parameters. These tests all have a standardized protocol that describes the entire test set-up. The tests analyse flexural strength, depth of cure, susceptibility to ambient light, color stability, water sorption and solubility, and radiopacity. Some tests have a clinical correlation. A high flexural strength, for instance, decreases the risk of fractures of the marginal ridge in posterior restorations and incisal edge build-ups of restored anterior teeth. Other tests do not have a clinical correlation or the threshold values are too low, which results in an approval of materials that show inferior clinical properties (e.g., radiopacity). It is advantageous to know the test set-ups and the ideal threshold values to correctly interpret the material data. Overall, however, laboratory assessment alone cannot ensure the clinical success of a product.

Dégradation des forêts et stock de carbone dans la biomasse épigée de la forêt dense humide de Manompana - Nord Est de Madagascar

L’estimation du stock de carbone contenu dans les forêts peut être effectuée de plusieurs manières. Les méthodes les plus connues sont destructives et nécessitent l’abattage d’un grand nombre représentatif d’arbres. Cette représentativité est difficilement atteinte dans les forêts tropicales, présentant une diversité d’espèces exceptionnelles, comme à Madagascar. Afin d’évaluer le niveau de dégradation des forêts, une étude d'images par télédétection est effectuée au moyen de l’analyse du signal radiométrique, combinée à un inventaire non destructif de biomasse. L’étude de la dynamique du paysage proposé est alors basée sur une correction atmosphérique d’une image SPOT 5, de l’année 2009, et sur une classification semi supervisée de l’occupation des sols, combinant une classification préliminaire non supervisée, un échantillonnage aléatoire des classes et une classification supervisée avec un maximum de vraisemblance. La validation est effectuée à l’aide de points indépendants relevés lors des inventaires de biomasse avec des valeurs du stock de carbone bien précises. La classification non supervisée a permis de ressortir deux classes de forêt dénommées « peu dégradée » et « dégradée ». La première désigne l’état climax (le stock de carbone a atteint une valeur qui varie peu) alors que la seconde est caractérisée par un taux de carbone plus faible que le niveau climax, mais qui peut être atteint sans perturbation. Cette première classification permet alors de répartir les placettes d’inventaire dans chaque classe. La méthode d’inventaire recueille à la fois des données dendrométriques classiques (espèce, densité, hauteur totale, hauteur fût, diamètre) et des échantillons représentatifs de branches et de feuilles sur un arbre. Ces différents paramètres avec la densité de bois permettent d’établir une équation allométrique de laquelle est estimée la biomasse totale d’un arbre et conséquemment de la formation forestière. Par la suite, la classification supervisée a été effectuée à partir d’échantillons aléatoires donnant la valeur de séparabilité des classes, de la classification finale. De plus, les valeurs de stocks de carbone à l’hectare, estimées de chaque placette, ont permis de valider cette classification et d’avoir une évaluation de la précision. La connaissance de ce niveau de dégradation issue de données satellitaires à haute résolution spatiale, combinées à des données d’inventaire, ouvre le champ du suivi interannuel du stock de carbone et subséquemment de la modélisation de la situation future du stock de carbone dans différents types de forêts.

Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling

In recent years, layered manufacturing (LM) processes have begun to progress from rapid prototyping techniques towards rapid manufacturing methods, where the objective is now to produce finished components for potential end use in a product (Caulfield et al., 2007). LM is especially promising for the fabrication of specific need, low volume products such as replacement parts for larger systems. This trend accentuates the need for a thorough understanding of the associated mechanical properties and the resulting behavior of parts produced by layered methods. Not only must the base material be durable, but the mechanical properties of the layered components must be sufficient to meet in-service loading and operational requirements, and be reasonably comparable to parts produced by more traditional manufacturing techniques. This chapter presents the details of a study completed to quantitatively analyze the potential of fused deposition modelling to fully evolve into a rapid manufacturing tool. The project objective is to develop an understanding of the dependence of the mechanical properties of FDM parts on raster orientation and to assess whether these parts are capable of maintaining their integrity while under service loading. The study examines the effect of fiber orientation, i.e. the direction of the polymer beads relative to the loading direction of the part, on a variety of important mechanical properties of ABS components fabricated by fused deposition modeling. Tensile, compressive, flexural, impact, and fatigue strength properties of FDM specimens are examined, evaluated, and placed in context in comparison with the properties of injection molded ABS parts.

Deforestation and forest degradation monitoring and assessment of biomass and carbon stock of lowland rainforest in the Analanjirofo region, Madagascar

Madagascar is currently developing a policy and strategies to enhance the sustainable management of its natural resources, encouraged by United Nations Framework Convention on Climate Change (UNFCCC) and REDD. To set up a sustainable financing scheme methodologies have to be provided that estimate, prevent and mitigate leakage, develop national and regional baselines, and estimate carbon benefits. With this research study this challenge was tried to be addressed by analysing a lowland rainforest in the Analanjirofo region in the district of Soanierana Ivongo, North East of Madagascar. For two distinguished forest degradation stages: “low degraded forest” and “degraded forest” aboveground biomass and carbon stock was assessed. The corresponding rates of carbon within those two classes were calculated and linked to a multi-temporal set of SPOT satellite data acquired in 1991, 2004 and 2009. Deforestation and particularly degradation and the related carbon stock developments were analysed. With the assessed data for the 3 years 1991, 2004 and 2009 it was possible to model a baseline and to develop a forest prediction for 2020 for Analanjirofo region in the district of Soanierana Ivongo. These results, developed applying robust methods, may provide important spatial information regarding the priorities in planning and implementation of future REDD+ activities in the area.