Córdoba ¿capital nacional de las tecnologías de la información y la comunicación o paraíso fiscal y de mano de obra calificada barata?

El discurso del gobierno de la provincia de Córdoba apuesta a una ciudad de las tecnologías. El modelo elegido privilegia el lugar de las empresas de software y los call centers, especialmente aquellos liderados por capitales extranjeros. A los fines de presentar algunos interrogantes sobre las políticas de promoción industrial, se tomarán como punto de partida los recientes anuncios del desembarco de Intel en Córdoba y se analizarán los beneficios ofrecidos por el gobierno. Además se indagará acerca de las ventajas y desventajas de favorecer la localización de estas empresas, y se ampliará el campo de estudio para incluir las empresas de capitales locales que participan en estas ramas productivas. De esta forma se busca iniciar un debate y reflexionar acerca del impacto del modelo adoptado por el gobierno provincial.

Diverging Development Paths of the Electronics Industry in Korea and Taiwan

This paper examines the process and mechanism of economic development in the Republic of Korea and Taiwan through a comparative analysis of the electronics industry in each country. The paper will show that in its initial stage of development, the electronics industry in both economies had the same type of dual structure: a domestic demand sector based on the protected domestic market, and an export sector intended to capitalize on low-wage labor for the international market. However, this dual structure in the two economies faded away after the mid-1970s as their respective indigenous export-oriented enterprises began to develop. But the primary industrial players in each economy were very different. In Korea they were comprehensive electronics manufacturers affiliated with chaebols, and in Taiwan they were small and medium-size enterprises. Differences in the two economies' development mechanisms have brought about this divergence in development paths. In Korea this mechanism has been characterized by the government's positive role and the chaebol's readiness to react to the government's leadership. In Taiwan the development mechanism has been based on the private sector independent from the government. As an extension of such diverged development paths, ICs and personal computers showed spectacular growth in Korea and Taiwan after the 1980s. The development of ICs in Korea was primarily the result of a decisive role played by the chaebol's sizable financial resources, while the competitiveness in personal computers largely reflected the agility and flexibility of Taiwanese small and medium-size enterprises.

A Distributive Comparison of Enterprise Size in Korea and Taiwan

Research to date on the economic development of the Republic of Korea and Taiwan has frequently contrasted the two economies by depicting the former as centered on large-scale enterprises and the latter on small and medium-size enterprises (SMEs). The purpose of this study is to see if the appropriateness of this perception will also be verified by the statistical data. In Section I the authors utilized census data on the Korean and Taiwanese manufacturing sectors to compare the distribution pattern of the sizes of enterprises in the two economies. However, on examining the available data for making this comparison, the authors discovered that for Korea the statistics provided are those at the level of the establishment (a physical unit engaging in industrial activities such as a factory, workshop, office, or mine) while the statistics for Taiwan are those at the enterprise level. Mindful of this difference, the authors looked at the portion of the economy accounted for by large-scale establishments in Korea that employed 500 workers or more and by enterprises in Taiwan employing the same number of workers, and they discovered that the portion that these large-scale businesses account for, especially in the area of output, has steadily declined since the 1980s. When comparing the share of total production that these large-scale establishments/enterprises account for in the two economies, the authors concluded that those in Korea accounted for a larger share of that economy's production than did their counterparts in Taiwan. The authors then compared the portion of the economy accounted for by establishments in Korea and enterprises in Taiwan that employed less than ten workers, and they found that the portion of the two economies that these very small-scale production units accounted for has also been on the decline. Section II compares the portions of the two economies accounted for by large business groups. After comparing the percentage of GDP accounted for by the total sales of these business groups, the authors found that large business groups in Korea have played a far more important role in Korean economy than has been the case for such groups in Taiwan. This difference in the importance of such business groups in the two economies has also played an significant part in fostering the perceived dichotomy of large-scale enterprises playing the important role in Korea versus SMEs being the important players in Taiwan. Section III compares the percentage of total exports accounted for by SMEs, and shows that SMEs in Taiwan account for a larger share of exports than do their counterparts in Korea. This section also shows that in Taiwan the share of export sales for SMEs has consistently exceeded that for non-SMEs, while in Korea the relationship between enterprise size and the rate of export sales has been directly proportional. This difference in the size of the major export players is another factor fostering the perception of the Korean economy being centered on big business while Taiwan's is on SMEs. Although there were difficulties and limitations when comparing the data of the two economies, the statistical comparison undertaken in this study shows that in general big business has played the major role in the development of the Korean economy while in Taiwan's economic development this role has been played by SMEs. Thus the statistical data also verifies the perceived dichotomy of these two economies.

Explaining the Persistence of State-ownership in China

In the recent decade China witnessed an upsurge of privatization of small and medium state-owned enterprises (SOEs). In contrast to the consequent sharp reduction in the number of firms, however, the estimated share of broadly-defined SOEs that includes limited liabilities companies controlled by the State has shown virtually no sign of decline. We explain the backgrounds of this seemingly paradoxical persistence of state-ownership by looking into two distinctive types of large SOEs: traditional SOEs that remain dominant in oligopolistic industries and manager-controlled SOEs surviving in competitive industries. The two types exemplify several factors constraining further progress of SOE reform such as, financing the costs of restructuring, redefining the role of the State as the single dominant shareholder, and balancing the interests of the State and managers as entrepreneurs. Sorting these issues out will take time, which means that instabilities associated with state corporate ownership will remain in place in the foreseeable future in China.

The Impact of United States Sanctions on the Myanmar Garment Industry

The United States imposed trade sanctions against the military regime in Myanmar in July 2003. The import ban damaged the garment industry in particular. This industry exported nearly half of its products to the United States, and more than eighty percent of United States imports from Myanmar had been clothes. The garment industry was probably the main target of the sanctions. Nevertheless, the impact on the garment industry and its workers has not been accurately evaluated or closely examined. The purpose of this paper is to evaluate the impact of the sanctions and to further understand the present situation. This is done using several sources of information, including the author's field and questionnaire surveys. This paper also describes the process of selection and polarization underway in the garment industry, an industry that now has more severe competition fueled by the sanctions. Through such a process, the impact was inflicted disproportionately on small and medium-sized domestic firms and their workers.

米国経済制裁によるミャンマー縫製産業への影響－苦しむのは誰か？－

2003年7月、米国はミャンマー製品の全面的な輸入禁止という、厳しい経済制裁を発動した。この制裁の最大の被害者は、ミャンマー縫製産業であった。制裁発動前、ミャンマーの対米輸出の８割以上は衣料品だったからである。多くの企業が倒産し、多くの労働者が職を失った。しかし、これまでその影響を包括的かつ正確に評価した調査・研究は皆無であった。本論文は現地での詳細なフィールド・ワークに基づき、経済制裁がミャンマー縫製産業に与えた影響を分析する。経済制裁で苦しむのは誰か。そして、経済制裁は所期の効果を上げているのか。これらの疑問に答える。

Empirical global value chain analysis in electronics and automobile industries :An application of Asian international input-output tables

This study aims to examine the international value distribution structure among major East Asian economies and the US. The mainstream trade theory explains the gains from trade; however, global value chain (GVC) approach emphasises uneven benefits of globalization among trading partners. The present study is mainly based on this view, examining which economy gains the most and which the least from the East Asian production networks. Two key industries, i.e., electronics and automobile, are our principle focus. Input-output method is employed to trace the creation and flows of value-added within the region. A striking fact is that some ASEAN economies increasingly reduce their shares of value-added, taken by developed countries, particularly by Japan. Policy implications are discussed in the final section.

The size distribution of all Cambodian establishments

This paper presents empirical evidence on the size distribution of all Cambodian establishments in the nonfarm sector for 2009. Small- and large-scale establishments account for the largest share of employment, pointing to a “missing middle” that is commonly observed in developing countries. The analysis provides little evidence for Zipf’s law because Cambodian industry is characterized by a more dense mass of small establishments than the Zipf distribution would predict.

Presidentialism and political parties in Indonesia : why are all parties not presidentialized?

This paper analyzes whether the "presidentialization of political parties" is occurring in newly democratizing Indonesia, as argued by Samuels and Shugart (2010). In Indonesia not all parties are becoming presidentialized. Parties are presidentialized when they have a solid organizational structure and have the potential to win presidential elections. Parties established by a presidential candidate need not face an incentive incompatibility between their executive and legislative branches, since the party leader is not the "agent" but the "principal". On the other hand, small and medium-sized parties, which have few prospects of winning presidential elections, are not actively involved in the election process, therefore party organization is not presidentialized. As the local level, where the head of government has been directly elected by the people since 2005 in Indonesia, the presidentialization of political parties has begun to take place.

Perception of employers and employees regarding the attitude of businesses toward the environment: a qualitative analysis

Commitment and involvement from the different members of an organization are two key elements for an organization to achieve its environmental excellence. Firstly, businesses are aware of the close relationship between their activities and the environment, for they are not only polluting agents but also agents with the capacity to reduce adverse environmental impacts. Secondly, the fact that employees can play a relevant role in terms of the socially responsible measures to be taken by organizations has started to become an irrefutably important issue. This piece of research is intended to help gain knowledge concerning the attitude of the two main actors in productive activity toward the environmental, that is, employers and employees; as well, this research intends to identify factors determining behaviour towards the environmental. For this, we have gathered the ideas and assessments contained in the discourse of a group of small and medium-sized businesses, large company owners and officers, employees, and work related risk prevention representatives. Qualitative work consisted of in-depth interviews and the creation of discussion groups.

Metamodelo para la mejora del proceso de gestión de requisitos

El vertiginoso avance de la informática y las telecomunicaciones en las últimas décadas ha incidido invariablemente en la producción y la prestación de servicios, en la educación, en la industria, en la medicina, en las comunicaciones e inclusive en las relaciones interpersonales. No obstante estos avances, y a pesar de la creciente aportación del software al mundo actual, durante su desarrollo continuamente se incurre en el mismo tipo de problemas que provocan un retraso sistemático en los plazos de entrega, se exceda en presupuesto, se entregue con una alta tasa de errores y su utilidad sea inferior a la esperada. En gran medida, esta problemática es atribuible a defectos en los procesos utilizados para recoger, documentar, acordar y modificar los requisitos del sistema. Los requisitos son los cimientos sobre los cuáles se construye un producto software, y sin embargo, la incapacidad de gestionar sus cambios es una de las principales causas por las que un producto software se entrega fuera de tiempo, se exceda en coste y no cumpla con la calidad esperada por el cliente. El presente trabajo de investigación ha identificado la necesidad de contar con metodologías que ayuden a desplegar un proceso de Gestión de Requisitos en pequeños grupos y entornos de trabajo o en pequeñas y medianas empresas. Para efectos de esta tesis llamaremos Small-Settings a este tipo de organizaciones. El objetivo de este trabajo de tesis doctoral es desarrollar un metamodelo que permita, por un lado, la implementación y despliegue del proceso de Gestión de Requisitos de forma natural y a bajo coste y, por otro lado, el desarrollo de mecanismos para la mejora continua del mismo. Este metamodelo esta soportado por el desarrollo herramientas que permiten mantener una biblioteca de activos de proceso para la Gestión de Requisitos y a su vez contar con plantillas para implementar el proceso partiendo del uso de activos previamente definidos. El metamodelo contempla el desarrollo de prácticas y actividades para guiar, paso a paso, la implementación del proceso de Gestión de Requisitos para una Small-Setting utilizando un modelo de procesos como referencia y una biblioteca de activos de proceso como principal herramienta de apoyo. El mantener los activos de proceso bien organizados, indexados, y fácilmente asequibles, facilita la introducción de las mejores prácticas al interior de una organización. ABSTRACT The fast growth of computer science and telecommunication in recent decades has invariably affected the provision of products and services in education, industry, healthcare, communications and also interpersonal relationships. In spite of such progress and the active role of the software in the world, its development and production continually incurs in the same type of problems that cause systematic delivery delays, over budget, a high error rate and consequently its use is lower than expected. These problems are largely attributed to defects in the processes used to identify, document, organize, and track all system's requirements. It is generally accepted that requirements are the foundation upon which the software process is built, however, the inability to manage changes in requirements is one of the principal factors that contribute to delays on the software development process, which in turn, may cause customer dissatisfaction. The aim of the present research work has identified the need for appropriate methodologies to help on the requirement management process for those organizations that are categorised as small and medium size enterprises, small groups within large companies, or small projects. For the purposes of this work, these organizations are named Small-Settings. The main goal of this research work is to develop a metamodel to manage the requirement process using a Process Asset Library (PAL) and to provide predefined tools and actives to help on the implementation process. The metamodel includes the development of practices and activities to guide step by step the deployment of the requirement management process in Small-Settings. Keeping assets organized, indexed, and readily available are a main factor to the success of the organization process improvement effort and facilitate the introduction of best practices within the organization. The Process Asset Library (PAL) will become a repository of information used to keep and make available all process assets that are useful to those who are defining, implementing, and managing processes in the organization.

Co-creación de semiconductores

El mercado de los semiconductores está saturado de productos similares y de distribuidores con una propuesta de servicios similar. Los procesos de Co-Creación en los que el cliente colabora en la definición y desarrollo del producto y proporciona información sobre su utilidad, prestaciones y valor percibido, con el resultado de un producto que soluciona sus necesidades reales, se están convirtiendo en un paso adelante en la diferenciación y expansión de la cadena de valor. El proceso de diseño y fabricación de semiconductores es bastante complejo, requiere inversiones cada vez mayores y demanda soluciones completas. Se requiere un ecosistema que soporte el desarrollo de los equipos electrónicos basados en dichos semiconductores. La facilidad para el diálogo y compartir información que proporciona internet, las herramientas basadas en web 2.0 y los servicios y aplicaciones en la nube; favorecen la generación de ideas, el desarrollo y evaluación de productos y posibilita la interacción entre diversos co-creadores. Para iniciar un proceso de co-creación se requiere métodos y herramientas adecuados para interactuar con los participantes e intercambiar experiencias, procesos para integrar la co-creación dentro de la operativa de la empresa, y desarrollar una organización y cultura que soporten y fomenten dicho proceso. Entre los métodos más efectivos están la Netnografía que estudia las conversaciones de las comunidades en internet; colaboración con usuarios pioneros que van por delante del Mercado y esperan un gran beneficio de la satisfacción de sus necesidades o deseos; los estudios de innovación que permiten al usuario definir y a menudo crear su propia solución y la externalización a la multitud, que mediante una convocatoria abierta plantea a la comunidad retos a resolver a cambio de algún tipo de recompensa. La especialización de empresas subcontratistas en el desarrollo y fabricación de semiconductores; facilita la innovación abierta colaborando con diversas entidades en las diversas fases del desarrollo del semiconductor y su ecosistema. La co-creación se emplea actualmente en el sector de los semiconductores para detectar ideas de diseños y aplicaciones, a menudo mediante concursos de innovación. El servicio de soporte técnico y la evaluación de los semiconductores con frecuencia es fruto de la colaboración entre los miembros de la comunidad fomentada y soportada por los fabricantes del producto. Con el programa EBVchips se posibilita el acceso a empresas pequeñas y medianas a la co-creación de semiconductores con los fabricantes en un proceso coordinado y patrocinado por el distribuidor EBV. Los semiconductores configurables como las FPGAs constituyen otro ejemplo de co-creación mediante el cual el fabricante proporciona el circuito integrado y el entorno de desarrollo y los clientes crean el producto final definiendo sus características y funcionalidades. Este proceso se enriquece con bloques funcionales de diseño, IP-cores, que a menudo son creados por la comunidad de usuarios. ABSTRACT. The semiconductor market is saturated of similar products and distributors with a similar proposal for services. The processes of co-creation in which the customer collaborates in the definition and development of the product and provides information about its utility, performance and perceived value, resulting in a product that solves their real needs, are becoming a step forward in the differentiation and expansion of the value chain. The design and semiconductor manufacturing process is quite complex, requires increasingly higher investments and demands complete solutions. It requires an ecosystem that supports the development of electronic equipments based on such semiconductors. The ease of dialogue and sharing information that provides internet, web 2.0-based tools and services and applications in the cloud; favor the generation of ideas, the development and evaluation of products and allows the interaction between various co-creators. To start a process of co-creation adequate methods and tools are required to interact with the participants and exchange experiences, processes to integrate the co-creation within the operations of the company, and developing an organization and culture that support and promote such process. Among the most effective methods are the Netnography that studies the conversations of the communities on the internet; collaboration with Lead Users who are ahead of the market and expect a great benefit from the satisfaction of their needs or desires; Innovation studies that allow the user to define and often create their own solution and Crowdsourcing, an open call to the community to solve challenges in exchange for some kind of reward. The specialization of subcontractors in the development and manufacture of semiconductors; facilitates open innovation in the context of collaboration with different entities working in the different phases of the development of the semiconductor and its ecosystem. Co-creation is used currently in the semiconductor sector to detect ideas of designs and applications, often through innovation’s contests. Technical support and evaluation of semiconductors frequently is the result of collaboration between members of the community fostered and supported by the manufacturers of the product. The EBVchips program provides access to small and medium-sized companies to the co-creation of semiconductors with manufacturers in a process coordinated and sponsored by the Distributor EBV. Configurable semiconductors like FPGAs are another example of co-creation whereby the manufacturer provides the integrated circuit and the development environment and customers create the final product by defining their features and functionality. This process is enriched with IP-cores, designs blocks that are often created by the user community.

Metodología para el análisis de los efectos de la rotura de un depósito en entorno urbano y clasificación de su riesgo potencial

El riesgo asociado a la rotura de un depósito de agua en entorno urbano (como la ocurrida, por ejemplo, en la Ciudad Autónoma de Melilla en Noviembre de 1997) y los potenciales daños que puede causar, pone en duda la seguridad de este tipo de infraestructuras que, por necesidades del servicio de abastecimiento de agua, se construyen habitualmente en puntos altos y cercanos a los núcleos de población a los que sirven. Sin embargo, la baja probabilidad de que se produzca una rotura suele rebajar los niveles de alerta asociados a los depósitos, haciéndose hincapié en la mejora de los métodos constructivos sin elaborar metodologías que, como en el caso de las presas y las balsas de riego, establezcan la necesidad de clasificar el riesgo potencial de estas infraestructuras en función de su emplazamiento y de estudiar la posible construcción de medidas mitigadoras de una posible rotura. Por otro lado, para establecer los daños que pueden derivarse de una rotura de este tipo, se hace imprescindible la modelización bidimensional de la ola de rotura por cuanto la malla urbana a la que afectaran no es susceptible de simulaciones unidimensionales, dado que no hay un cauce que ofrezca un camino preferente al agua. Este tipo de simulación requiere de una inversión económica que no siempre está disponible en la construcción de depósitos de pequeño y mediano tamaño. Esta tesis doctoral tiene como objetivo el diseño de una metodología simplificada que, por medio de graficas y atendiendo a las variables principales del fenómeno, pueda estimar un valor para el riesgo asociado a una posible rotura y sirva como guía para establecer si un deposito (existente o de nueva implantación) requiere de un modelo de detalle para estimar el riesgo y si es conveniente implantar alguna medida mitigadora de la energía producida en una rotura de este tipo. Con carácter previo se ha establecido que las variables que intervienen en la definición de riesgo asociado a la rotura, son el calado y la velocidad máxima en cada punto sensible de sufrir daños (daños asociados al vuelco y arrastre de personas principalmente), por lo que se ha procedido a estudiar las ecuaciones que rigen el problema de la rotura del depósito y de la transmisión de la onda de rotura por la malla urbana adyacente al mismo, así como los posibles métodos de resolución de las mismas y el desarrollo informático necesario para una primera aproximación a los resultados. Para poder analizar las condiciones de contorno que influyen en los valores resultantes de velocidad y calado, se ha diseñado una batería de escenarios simplificados que, tras una modelización en detalle y un análisis adimensional, han dado como resultado que las variables que influyen en los valores de calado y velocidad máximos en cada punto son: la altura de la lamina de agua del depósito, la pendiente del terreno, la rugosidad, la forma del terreno (en términos de concavidad) y la distancia del punto de estudio al deposito. Una vez definidas las variables que influyen en los resultados, se ha llevado a cabo una segunda batería de simulaciones de escenarios simplificados que ha servido para la discusión y desarrollo de las curvas que se presentan como producto principal de la metodología simplificada. Con esta metodología, que solamente necesita de unos cálculos simples para su empleo, se obtiene un primer valor de calado y velocidad introduciendo la altura de la lámina de agua máxima de servicio del depósito cuyo riesgo se quiere evaluar. Posteriormente, y utilizando el ábaco propuesto, se obtienen coeficientes correctores de los valores obtenidos para la rugosidad y pendiente media del terreno que se esta evaluando, así como para el grado de concavidad del mismo (a través de la pendiente transversal). Con los valores obtenidos con las curvas anteriores se obtienen los valores de calado y velocidad en el punto de estudio y, aplicando la formulación propuesta, se obtiene una estimación del riesgo asociado a la rotura de la infraestructura. Como corolario a la metodología mencionada, se propone una segunda serie de gráficos para evaluar, también de forma simplificada, la reducción del riesgo que se obtendría con la construcción de alguna medida mitigadora como puede ser un dique o murete perimetral al depósito. Este método de evaluación de posible medidas mitigadoras, aporta una guía para analizar la posibilidad de disminuir el riesgo con la construcción de estos elementos, o la necesidad de buscar otro emplazamiento que, si bien pueda ser no tan favorable desde el punto de vista de la explotación del depósito, presente un menor riesgo asociado a su rotura. Como complemento a la metodología simplificada propuesta, y además de llevar a cabo la calibración de la misma con los datos obtenidos tras la rotura del depósito de agua de Melilla, se ha realizado una serie de ejemplos de utilización de la metodología para, además de servir de guía de uso de la misma, poder analizar la diferencia entre los resultados que se obtendrían con una simulación bidimensional detallada de cada uno de los casos y el método simplificado aplicado a los mismos. The potential risk of a catastrophic collapse of a water supply reservoir in an urban area (such as the one occurred in Melilla in November 1997) and the damages that can cause, make question the security in this kind of infrastructures, which, by operational needs, are frequently built in high elevations and close to the urban areas they serve to. Since the likelihood of breakage is quite low, the alert levels associated to those infrastructures have also been downgraded focussing on the improvement of the constructive methods without developing methodologies (like the ones used in the case of dams or irrigation ponds) where there is a need of classifying the potential risk of those tanks and also of installing mitigating measures. Furthermore, to establish the damages related to a breakage of this kind, a twodimensional modelling of the breakage wave becomes imperative given that the urban layout does not provide a preferential way to the water. This kind of simulation requires financial investment that is not always available in the construction of small and medium sized water tanks. The purpose of this doctoral thesis is to design a simplified methodology, by means of charts and attending to the main variables of the phenomenon, that could estimate a value to the risk associated to a possible breakage. It can also be used as a guidance to establish if a reservoir (existing or a new one) requires a detailed model to estimate the risk of a breakage and the benefits of installing measures to mitigate the breakage wave effects. Previously, it has been established that the variables involved in the risk associated to a breakage are the draft and the maximum speed in every point susceptible to damages (mainly damages related to people). Bellow, the equations ruling the problem of the reservoir breakage have been studied as well as the transmission of the breakage wave through the urban network of the city and the possible methods to solve the equations and the computer development needed to a first approach to the results. In order to be able to analyse the boundary conditions affecting the values resulting (speed and draft), a set of scenarios have been designed. After a detailed modelling and a dimensionless analysis it has been proved that the variables that influence the operational draughts and the maximum speed in every point are the water level in the tank, the slope, the roughness and form (in terms of concavity) of the terrain and the distance between the tank and the control point. Having defined the involving variables, a second set of simulations of the simplified scenarios has been carried out and has helped to discuss and develop the curves that are here presented as the final product of the simplified methodology. This methodology only needs some simple calculations and gives a first value of draft and speed by introducing the maximum water level of the tank being evaluated. Subsequently, using the suggested charts, the method gives correction coefficients of the measured values for roughness and average slope of the assessed terrain as well as the degree of concavity (through transverse gradient).With the values from the previous curves (operational draughts and speed at the point of survey) and applying the proposed formulation, an estimation of the risk associated to the breakage of the infrastructure is finally obtained. As a corollary of the mentioned methodology, another set of diagrams is proposed in order to evaluate, in a simplified manner also, the risk reduction that could be gained with the construction of some mitigating measures such as dikes or retaining walls around the reservoir. This evaluating method provides a guide to analyse the possibility to reduce the risk, constructing those elements or even looking for a different site that could be worse in terms of exploitation of the tank but much safer. As a complement to the simplified methodology here proposed, and apart from completing its calibration with the obtained data after the reservoir breakage in Melilla, a number of examples of the use of the methodology have been made to be used as a user guide of the methodology itself, as well as giving the possibility of analysing the different results that can be obtained from a thorough two-dimensional simulation or from the simplified method applied to the examples.

UM ESTUDO SOBRE A IMPORTÂNCIA DO USO DAS FERRAMENTAS DE CONTROLE GERENCIAL NAS MICRO, PEQUENAS E MÉDIAS EMPRESAS INDUSTRIAIS NO MUNICÍPIO DE SÃO CAETANO DO SUL

O objetivo desse estudo foi evidenciar o uso das ferramentas de controle gerencial que auxiliam no processo de tomada de decisão nas Micros, Pequenas e Médias Empresas, no município de SCSul. Entende-se, que na atualidade esses instrumentos devem ser alinhados com a realidade dessas organizações e as informações extraídas por estas devem ser a base para a tomada de decisão que perpetuem a riqueza dos investidores. O procedimento metodológico aplicado na escolha das empresas pesquisadas foi o critério de conveniência, utilizando o método de raciocínio dedutivo, através de aplicação de um questionário em 296 empresas, pelo a qual 18,6% destas se depuseram a responder o questionário. As empresas foram classificadas de acordo com o faturamento bruto anual estabelecido pela Receita Federal. Após a análise dos resultados, foi possível detectar que cerca de 41% dessas organizações estão a mais de 20 anos no mercado, o que demonstra uma boa consolidação no mercado. Detecta-se, também, que estes empresários-gerentes possuem uma forte formação superior: 31,27% pós-graduados e 22,22% graduados, o que pode ser um diferencial na gestão desses negócios. Como o pressuposto dessa pesquisa foi de analisar: se as MPME s industriais no município de SCSul estão utilizando as ferramentas de controle gerencial em seu processo de gestão para tomada de decisão, diante das análises efetuadas, tanto pelo o estudo de campo com bibliográfica, conclui-se que a tomada de decisão nessas empresas está baseada nas ferramentas de controle e que estas possuem um bom controle dos seus negócios contrariando o que se esperava.