Growth rate of the crab Dissodactylus crinitichelis Moreira, 1901 (Crustacea : Decapoda : Pinnotheroidea) under laboratory conditions

The goal of the present study was to investigate the growth rate of the crab Dissodactylus crinitiehelis, its molt increments, and the duration of the intermolt intervals under laboratory conditions, focusing on differences between sexes and between juvenile and adult phases. Crabs were collected at Flamengo Beach, Ubatuba, São Paulo State, Brazil, by scuba divers. In the laboratory, individuals were maintained in isolation and fed nauplii of Artemia sp. daily. The sex and carapace width of exuviae and dead crabs were recorded. During the juvenile phase, mean growth was 11.8 +/- 2.7% in males and 11.2 +/- 3.6% in females, with their respective intermolt intervals 25.4 +/- 9.2 and 26.4 +/- 8.3 d (mean +/- SD). After reaching morphological sexual maturity, the intermolt intervals increased to 33.4 10.1 d in males and 32.7 +/- 10.4 d in females, and the growth rates of both sexes slowed to 6.4 +/- 1.9% in males and 5.7 +/- 1.6% in females. There was a significant decrease in molt increment and an increase in intermolt intervals associated with the maturation from juveniles to adults, evidencing differential energy allocation during the last phase of ontogeny.

Foraging Behavior of the Swarm-founding Wasp Polybia (Trichothorax) sericea (Hymenoptera, Vespidae): Daily Resource Collection Activity and Flight Capacity

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos em curto prazo da aplicação de aloxana para indução de diabetes em ratos wistar

The present study aimed to verify action of alloxan in metabolic and immune parameters after 24 and 192 hours of the injection in Wistar rats. Thus, eight rats were fasted and received monohidrated alloxan Sigma (32 mg/kg body weight) via endovenous. Glycemia and trglyceridemia analyzes were performed before and 192 hours after alloxan application. After 24 hours, alloxan application increased water intake and decreased body mass, food intake and leucocytes counting. 192 hours after alloxan application, there was a recuperation in food intake and leucocytes counting. on the other hand, in this period there was an increase of glycemia and water intake and reduction of body mass. These results indicate that some of diabetic signs caused by alloxan occur in short-term after drug administration.

Comparação entre folhas sombreadas de sete clones adultos de seringueira

Nas seringueiras, o substrato para a síntese do látex provém, em curto prazo, do processo fotossintético, realizado em sua maioria por folhas dos estratos sujeitos à radiação sub-saturante. Neste estudo, foram avaliados e comparados (1) os teores de pigmentos fotossintéticos (clorofilas a, b e carotenóides totais); (2) a espessura foliolar total e dos parênquimas clorofilianos; e (3) a área e peso da matéria seca foliar de folhas sombreadas, para seis clones de seringueira selecionados pelo Instituto Agronômico de Campinas (IAC), comparativamente ao tradicional clone RRIM 600. em média, os teores de clorofila total (a+b) e de carotenóides totais foram, respectivamente, de 3,14 e 1,04 mg g-1 de peso fresco, sempre superiores ou iguais ao da testemunha. A espessura foliolar média foi de 119,62 µm e mostrou grande variação entre os clones IAC, e destes quanto à testemunha. A área foliar média, de 219,17 cm², foi quase equivalente para todos os clones. A área foliar específica foi, em média, de 198,08 cm² g-1, e neste caso, o maior valor foi observado para o IAC 56, sendo os demais, inferiores ou equivalentes ao da testemunha. Os clones IAC 302 e IAC 303 mostraram-se estatisticamente similares ao RRIM 600 para todos os caracteres analisados, e uma relação com a produtividade foi sugerida para o clone IAC 303.

Estudo da degradação da força gerada por elásticos ortodônticos sintéticos

OBJETIVO: analisar separada e comparativamente cinco marcas comerciais de elásticos sintéticos (Morelli, Ormco, GAC, TP e Unitek) quanto à degradação da força gerada por estes em função do tempo, quando mantidos continuamente estirados em uma distância de 20mm. METODOLOGIA: as leituras das quantidades de força gerada pelos elásticos foram feitas nos intervalos 1/2, 1, 6, 12, 24, 48 horas; 7, 14, 21 e 28 dias. Construiu-se um gráfico de força versus tempo, onde se pôde observar significativa redução na quantidade de força liberada pelos elásticos na primeira hora de ativação. RESULTADOS: verificou-se uma redução na quantidade de força gerada pelos elásticos de 20,31 a 38,47% na primeira hora de testes e de 47,7 a 75,95% em 28 dias de estiramento constante. CONCLUSÕES: concluiu-se que todas as amostras das marcas comerciais estudadas sofreram significativa redução na quantidade de força liberada na primeira hora de ativação e que a média de força gerada em 21 e 28 dias de testes foi semelhante para todas as amostras pesquisadas.

Surface Passivation of Nanoporous TiO2 via Atomic Layer Deposition of ZrO2 for Solid-State Dye-Sensitized Solar Cell Applications

We report here the utilization of atomid layer deposition to passivate surface map states in mosoporous TiO2 nanoparticles for solid state dye sensitized solar cells based on 9,9'-spirobifluorene (spiro-OMeTAD). By depositing ZrO2 films with angstrom-level precision, coating the mesoporous TiO2 produces over a two-fold enhancement in short-circuit current density, as compared to a control device. Impedance spectroscopy measurements provide evidence that the ZrO2 coating reduces recombination lossed at the TiO2/spiro-OMeTAD interface and passivates localized surface states. Low-frequency negative capacitances, frequently observed in nanocomposite solar cells, have been associated with the surface-state mediated charge transfer from TiO2 to the spiro-OMeTAD.

Aplicação do método eletromagnético indutivo (EM) no monitoramento de contaminantes em subsuperfície

O uso combinado de poços de amostragem e técnicas geofísicas constitui a maneira mais adequada para identificação e o monitoramento de áreas contaminadas. Este procedimento permite a locação de poços de amostragem e de monitoramento em pontos estratégicos, otimizando resultados e minimizando gastos. O método geofísico Eletromagnético Indutivo (EM) apresenta amplas possibilidades de aplicação em estudos ambientais devido à facilidade na aquisição de dados, versatilidade do equipamento em campo e a possibilidade de varredura de grandes áreas num curto espaço de tempo. Este trabalho realiza uma análise comparativa de dados em obtidos no ano de 1992 e em 2003. O local estudado é uma área industrial que apresenta contaminação do solo e água subterrânea por Benzeno, Tolueno, Xileno, 1,2 dicloroetano, Sódio e Cloreto, produto da infiltração de efluentes químicos diretamente do solo. Os resultados indicam uma acentuada atenuação da pluma contaminante, com provável redução no grau de contaminação. Os compostos de fase leve (LNAPLs) apresentaram maior tendência de migração horizontal, concomitante ao movimento da água subterrânea. Os compostos de fase densa (DNAPLs) apresentaram uma tendência mais acentuada de migração no sentido vertical, possivelmente devido à ausência de superfícies impermeáveis. Os compostos inorgânicos acompanharam o fluxo dos compostos de fase líquida não aquosa (NAPLs), o que por sua vez permitiu a caracterização da pluma de contaminação como um corpo condutivo em relação às áreas adjacentes.

Apontamentos para uma política educacional sobre mídia na escola brasileira

Este artigo aborda características de três campos responsáveis pelo perfil do trabalho pedagógico escolar com a mídia: os meios de comunicação, as instituições acadêmicas e a própria escola. Procura-se, então, destacar as dificuldades para a consolidação desses campos no cenário escolar. O texto, enfim, ressalta a necessidade de politização da escola a partir do trabalho com a mídia, para melhorar as condições de diálogo entre a escola e os agentes externos.

Análise de risco aplicada ao manejo precaucionário das pescarias artesanais na região do reservatório da UHE-Tucuruí (Pará, Brasil)

As pescarias no reservatório da UHE-Tucuruí no rio Tocantins, Pará, envolvem cerca de 6.000 pescadores e movimentam cerca de R$ 4,2 milhões/ano. A atividade se concentra em três espécies principais: tucunaré Cichla monoculus (capturado com anzol), pescada Plagioscion squamosissimus (capturado com rede e/ou anzol) e mapará Hypophthalmus marginatus (capturado com rede). Com o objetivo de caracterizar os pescadores e as pescarias do reservatório, criar cenários de aumento do esforço pesqueiro e prever os momentos de conflito pela escassez de recursos, foram levantadas informações da literatura e realizadas duas campanhas de coleta de dados nos anos de 1999 e 2000, envolvendo entrevistas com líderes comunitários e pescadores. As seguintes variáveis foram consideradas: desembarque por espécie-alvo (de acordo com os registros fornecidos pelas colônias de pescadores), artes de pesca, estratégias dos pescadores, conflitos e formas de apropriação do espaço e rendimentos da atividade. Estas variáveis foram inseridas em um modelo dinâmico, simulado no software Vensim PLE para um período de 10 anos a partir de 1999. Os resultados indicam que a pesca de anzol é a estratégia mais rentável, e que possíveis momentos de conflito devido à escassez de recursos podem acontecer em curto prazo (2005). A metodologia utilizada para as simulações e análises de risco também se revelou adequada à realidade local e ao conjunto de dados disponíveis.

Distribuição de poros e densidade de latossolos submetidos a diferentes sistemas de uso e manejo

Man cultivates the soil for centuries, but the intensive business and use of the soils under Cerrado vegetation for agricultural production grew out of the seventies. The objective of this study was to evaluate soil physical characteristics as a function of sampling time and the soil uses in a Cerrado area in Uberlandia City - MG, Brazil. The managements were adopted: degraded pasture (M-1), conventional tillage (M-2), minimum tillage (M-3), tillage absence (M-4), no-tillage (NT) for three years (M-5); NT for nine years (M-6), NT for three years after Pinus (M-7), PD for one year after Pinus (M-8) and Pinus forest (M-9) with 25 years old. The evaluations were conducted in 2002/03 growing season, in two areas. The soils were: area 1, an Oxisol (Red Latosol - LV-1, M-1 through M-5) and area 2, two Oxisols (Red Latosol and Red-Yellow Latosol - LVA and LV-2, M-6 through M-9). The physical attributes studied changed depending of the soil class, sampling time and management systems, with emphasis on the area 2 soils, which, in general, better preserved its main physical attributes. Managements with intense tillage, such as the M-2, are the most soil physically degrade, presenting mostly negative changes to soil bulk density, total porosity, microporosity and macroporosity. Since the systems which promote less tillage, in short term, to preserve desirable physical attributes. The M-9 system had the lowest attributes range, compared to the others.

Produção e composição do leite de vacas mantidas em pastagens de capim-elefante submetidas a duas frequências de pastejo

The objective of this study was to evaluate two grazing intervals (IG) for elephant grass (Pennisetum purpureum Schum cv. Cameroon) pasture: one variable, determined by the entry of animals to the paddocks when 95% of active photosynthetic radiation was intercepted by the sward, and fixed 26-day grazing interval. Eight dairy cows were used, averaging 124 days lactation, 516 kg body weight and 17.5 kg daily milk production at the beginning of the trial. The experimental period was 80 days divided into four sub-periods of 20 days each. Data were analyzed in a cross-over design. The grazing frequencies did not influence milk production and composition, plasma urea nitrogen, body condition score and variations in body weight. However, the stocking rate and milk production per hectare were higher for pasture with interval of grazing determined by 95% of active photosynthetic radiation. Thus grazing frequency defined in variable intervals by sward interception of active photosynthetic radiation result in higher milk production per area unit.

Natural fiber reinforced unsaturated polyester composites - An approach on compression molding

This work has been performed at Tapetes Sao Carlos-Brazil with the cooperation of the DaimlerChrysler Research Center Team in Ulm - Germany. The objective of the present paper is to report the results obtained with natural fiber reinforced unsaturated polyester (UP) composites, concerning surface quality measurements. The fibers that have been chosen for this work were sisal and curaua. The samples were produced by compression molding technique and afterwards submitted to three different tests, namely: a) thermal aging; b) water absorption and c) artificial weathering. The surface parameters measured before and after the tests were gloss, haze, short and long-waviness. The results have shown that after the tests there is a high loss of gloss, a high increase in haze, and a high increase in short and long-waviness as well. Curaua reinforced composites had a slightly better behavior when compared with sisal reinforced composites. The effect of the presence of filler and the addition of thermoplastic polyester (TP) on the material behavior has not been evidently detected. This result shows that the conventional technology/methods applied to UP-Fiberglass systems cannot be transferred to natural fibers without any modification. The fiber-matrix interaction and its response to the presence of additives must be fully understood before a successful processing route can be developed for painted natural fibers reinforced UP. Copyright © 2001 Society of Automotive Engineers, Inc.

Variabilidade espacial da estabilidade de agregados e matéria orgânica em solos de relevos diferentes

Soils submitted to the same management system in places with small relief variation manifest different spatial variability on their attributes. The objective of this work was to evaluate the spatial variability of the geometric medium diameter, aggregates in the >2 mm class, aggregates in the 2-1 mm class and organic matter of an Oxisol under culture of the sugarcane. Samplings of the soil in regular intervals of 10 m, in grid form, totaling 100 points, collected in the depths of 0.0-0.2 m and 0.2-0.4 m were made. Data were submitted to descriptive statistics, geostatistics and in sequence to kriging analyzes. Values of the variation coefficient were low for organic matter in the depth of 0.0-0.2 m, mean in the depth of 0.2-0.4 m, high for geometric medium diameter and mean for aggregates in the >2 mm class, aggregates in the 2-1 mm class in all studied depths. The occurrence of space dependence was observed for all the variables, and the largest ones were observed in the depth of 0.0-0.2 m. Small variations in the forms of the relief condition spatial variability differentiated for organic matter and stability of aggregates in the studied depths.

Reflexão sobre o ensino farmacêutico

This paper aims to discuss the directions of pharmaceutical education based on the new curriculum guidelines from MEC (Ministry of Education - Brazil). In the recent past, Brazilian pharmaceutical faculties prioritized the formation of professional resources in specific modalities in detriment of pharmacist's private field: the prescription filling and delivery at the drugstore. In order to avoid repeating the same mistake it is necessary to develop new competence, allowing the graduates to develop skills to connect the scientific and technological knowledge to Brazilian social context. The new curriculum guidelines are about to finish a time when the undergraduate studies seemed to split the pharmacist into two different professionals: one for the clinical analysis and other for the pharmaceutical industry. The previous educational model, which supposedly allows for pharmaceutical care without providing a broad integral knowledge of health sciences, cannot be repeated in the new curriculum. However, teaching subjects in a superficial and segmented manner, replete of predictable and repetitive technical practices and without a skilled teaching staff, will give no improvement in pharmacists education care. It is clear that the return of the formation of specific human resources in the field won't happen in short time.

Temperature analysis during bonding of brackets using LED or halogen light base units

The purpose of our investigation is to compare the intrapulpal temperature changes following blue LED system and halogen lamp irradiation at the enamel surface of permanent teeth. The fixation of brackets using composite resin is more comfortable and faster when using a photo-curable composite. Several light sources can be used: halogens, arc plasma, lasers, and recently blue LED systems. An important aspect to be observed during such a procedures is the temperature change. In this study, we have used nine human extracted permanent teeth: three central incisors, three lateral incisors, and three canines. Teeth were exposed to two light sources: blue LED system (preliminary commercial model LEC 470-II) and halogen lamp (conventional photo-cure equipment). The surface of teeth was exposed for 20, 40, and 60 sec at the buccal and lingual enamel surface with an angle of 45 degrees. Temperature values measured by a thermistor placed at pulpar chamber were read in time intervals of 1 sec. We obtained plots showing the temperature evolution as a function of time for each experiment. There is a correlation between heating quantity and exposition time of light source: with increasing exposition time, heating increases into the pulpal chamber. The halogen lamp showed higher heating than the LED system, which showed a shorter time of cooling than halogen lamp. The blue LED system seems like the indicated light source for photo-cure of composite resin during the bonding of brackets. The fixation of brackets using composite resin is more comfortable and faster when using a photo-curable composite. Blue LED equipment did not heat during its use. This could permit a shorter clinical time of operation and better performance. © Mary Ann Liebert, Inc.