Melt variability in percolated peridotite: an experimental study applied to reactive migration of tholeiitic basalt in the upper mantle

Melt-rock reaction in the upper mantle is recorded in a variety of ultramafic rocks and is an important process in modifying melt composition on its way from the source region towards the surface. This experimental study evaluates the compositional variability of tholeiitic basalts upon reaction with depleted peridotite at uppermost-mantle conditions. Infiltration-reaction processes are simulated by employing a three-layered set-up: primitive basaltic powder ('melt layer') is overlain by a 'peridotite layer' and a layer of vitreous carbon spheres ('melt trap'). Melt from the melt layer is forced to move through the peridotite layer into the melt trap. Experiments were conducted at 0.65 and 0.8 GPa in the temperature range 1,170-1,290 degrees C. In this P-T range, representing conditions encountered in the transition zone (thermal boundary layer) between the asthenosphere and the lithosphere underneath oceanic spreading centres, the melt is subjected to fractionation, and the peridotite is partially melting (T (s) similar to 1,260 degrees C). The effect of reaction between melt and peridotite on the melt composition was investigated across each experimental charge. Quenched melts in the peridotite layers display larger compositional variations than melt layer glasses. A difference between glasses in the melt and peridotite layer becomes more important at decreasing temperature through a combination of enrichment in incompatible elements in the melt layer and less efficient diffusive equilibration in the melt phase. At 1,290A degrees C, preferential dissolution of pyroxenes enriches the melt in silica and dilutes it in incompatible elements. Moreover, liquids become increasingly enriched in Cr(2)O(3) at higher temperatures due to the dissolution of spinel. Silica contents of liquids decrease at 1,260 degrees C, whereas incompatible elements start to concentrate in the melt due to increasing levels of crystallization. At the lowest temperatures investigated, increasing alkali contents cause silica to increase as a consequence of reactive fractionation. Pervasive percolation of tholeiitic basalt through an upper-mantle thermal boundary layer can thus impose a high-Si 'low-pressure' signature on MORB. This could explain opx + plag enrichment in shallow plagioclase peridotites and prolonged formation of olivine gabbros.

Enhanced biodegradation of hexachlorocyclohexane (HCH) in contaminated soils via inoculation with Sphingobium indicum B90A.

Soil pollution with hexachlorocyclohexane (HCH) has caused serious environmental problems. Here we describe the targeted degradation of all HCH isomers by applying the aerobic bacterium Sphingobium indicum B90A. In particular, we examined possibilities for large-scale cultivation of strain B90A, tested immobilization, storage and inoculation procedures, and determined the survival and HCH-degradation activity of inoculated cells in soil. Optimal growth of strain B90A was achieved in glucose-containing mineral medium and up to 65% culturability could be maintained after 60 days storage at 30 degrees C by mixing cells with sterile dry corncob powder. B90A biomass produced in water supplemented with sugarcane molasses and immobilized on corncob powder retained 15-20% culturability after 30 days storage at 30 degrees C, whereas full culturability was maintained when cells were stored frozen at -20 degrees C. On the contrary, cells stored on corncob degraded gamma-HCH faster than those that had been stored frozen, with between 15 and 85% of gamma-HCH disappearance in microcosms within 20 h at 30 degrees C. Soil microcosm tests at 25 degrees C confirmed complete mineralization of [(14)C]-gamma-HCH by corncob-immobilized strain B90A. Experiments conducted in small pits and at an HCH-contaminated agricultural site resulted in between 85 and 95% HCH degradation by strain B90A applied via corncob, depending on the type of HCH isomer and even at residual HCH concentrations. Up to 20% of the inoculated B90A cells survived under field conditions after 8 days and could be traced among other soil microorganisms by a combination of natural antibiotic resistance properties, unique pigmentation and PCR amplification of the linA genes. Neither the addition of corncob nor of corncob immobilized B90A did measurably change the microbial community structure as determined by T-RFLP analysis. Overall, these results indicate that on-site aerobic bioremediation of HCH exploiting the biodegradation activity of S. indicum B90A cells stored on corncob powder is a promising technology.

Production of nanometric particles in radio frequency glow discharges in mixtures of silane and methane

The formation of silicon particles in rf glow discharges has attracted attention due to their effect as a contaminant during film deposition or etching. However, silicon and silicon alloy powders produced by plasma¿enhanced chemical vapor deposition (PECVD) are promising new materials for sintering ceramics, for making nanoscale filters, or for supporting catalytic surfaces. Common characteristics of these powders are their high purity and the easy control of their stoichiometry through the composition of the precursor gas mixture. Plasma parameters also influence their structure. Nanometric powders of silicon¿carbon alloys exhibiting microstructural properties such as large hydrogen content and high surface/volume ratio have been produced in a PECVD reactor using mixtures of silane and methane at low pressure (-1 Torr) and low frequency square¿wave modulated rf power (13.56 MHz). The a¿Si1¿xCx:H powders were obtained from different precursor gas mixtures, from R=0.05 to R=9, where R=[SiH4]/([SiH4]+[CH4]). The structure of the a¿Si1¿xCx:H powder was analyzed by several techniques. The particles appeared agglomerated, with a wide size distribution between 5 and 100 nm. The silane/methane gas mixture determined the vibrational features of these powders in the infrared. Silicon-hydrogen groups were present for every gas composition, whereas carbon¿hydrogen and silicon¿carbon bonds appeared in methane¿rich mixtures (R-0.6). The thermal desorption of hydrogen revealed two main evolutions at about 375 and 660¿°C that were ascribed to hydrogen bonded to silicon and carbon, respectively. The estimated hydrogen atom concentration in the sample was about 50%.

Evaluation of the inhalation technique in asthmatic children visiting a specialised outpatient clinic

Background and objective: Asthma is one of the most frequent chronic diseases affecting children and adolescents. Good compliance is indispensable for effective treatment since a suboptimal use of inhalation devices can result in decreased therapeutic efficacy and increased morbidity. The objective of this work was to evaluate the inhalation technique of paediatric patients visiting a specialized consultation clinic of a university hospital. Design: Observational prospective study during a 3-month period. Setting Specialized consultation clinic of a university hospital. Main outcome measures: This study involved 40 outpatient infants, children and adolescents visiting alone or with their parent(s). Patients' data (age, sex, weight, diagnostic, reason for consulting, previous consultations) and their medicines were compiled using an ad hoc form. Filmed sequences of the inhalation procedure used by each child were reviewed independently by members of an interdisciplinary team consisting in a physician, a pharmacist, a nurse and a physiotherapist. A score of 1 was assigned to each correct step in the procedure, and a score of 0 to an incorrect step. A perfect procedure implied 12 correct steps. Results: Thirty patients were treated with a metered-dose inhaler and an inhalation chamber (Babyhaler or AeroChamber Plus); ten other patients were treated with a dry powder inhaler (Diskus or Turbuhaler). The agreement between the members of the interdisciplinary team was considered satisfactory. Nine patients (22.5%) reached an average score lower than 7, 18 patients (45%) a score between 7 and 10 and 13 (32.5%) a score equal to or better than 10. No patient reached the maximum score of 12. Users of the metered-dose inhalers (average score = 9.2) showed a better technique than users of the dry powder inhalers (average score = 7.4). Disappointingly, the score was not improved during a second consultation or following regular consultations. Conclusions: Video recording is a simple method to evaluate the degree of mastery of an inhalation procedure in paediatric patients. The method allows a convenient and efficient identification of suboptimal procedure steps by the hospital staff, and opens the way to patient-specific teaching. In two-thirds of juvenile patients, their inhalation technique was suboptimal despite initial training. This study shows conclusively that the inhalation technique in paediatric patients must be monitored during each examination, and teaching measures taken to improve it when necessary.

Effect of neem extract on the cotton aphid

The aphid Aphis gossypii Glover (Hemiptera: Aphididae), a harmful pest on cotton, causes direct damage, reducing plant vigor, and indirect damage by honeydew secretion and transmission of several viruses. Due to the problem of pesticide resistance, alternative techniques for chemical control, such as the use of natural insecticides, have been object of research. The effects of aqueous extracts of neem (Azadirachta indica A. Juss) seed powder on the development, survival and fecundity of A. gossypii were evaluated. Treatments consisted of neem seed powder in the concentrations of 23.8, 122.0, 410.0 and 1,410.0 mg/100 mL of distilled water. Mortality rate during the nymphal development for aphids maintained on cotton leaf discs treated with the two highest concentrations were, respectively, 60.0% and 100.0%. With the exception of the highest concentration (1,410.0 mg/100 mL), neem concentrations did not extend the aphids' development period. The net reproductive rate (R0) was of 35.0 nymphs/female for control aphids and of 0.0 nymph/female when the group of females was exposed to neem seed powder at 1,410.0 mg/100 mL since birth. The aqueous extract of neem seeds is efficient against the aphid A. gossypii, causing nymph mortality and reducing their survival period and fecundity.

Feeding and arrestment responses of Diabrotica speciosa to cucurbitacin-content formulations

The objective of this work was to evaluate arrestant and stimulant feeding effects on Diabrotica speciosa (Ger.), using cucurbitacin-content starch-based formulations prepared with varying starch sources, and adding potassium lignate. In a glass slide assay, the wash off resistance of formulations was compared. Potassium lignate did not improve wash off resistance. Lagenaria vulgaris L. powder, in which cucurbitacin B concentration was determined as 0.28%, was added to the most adhesive formulation. The resultant material was used in a two-choice assay in which leaves of common bean, Phaseolus vulgaris L., treated with concentrations of 2.5%, 5%, 10%, 15% and 20% were offered to insects together with untreated control leaves. Greater number of insects and leaves consumed were found on leaves treated with cucurbitacin-content formulation (2.5%, 5% - greatest response -, 10% and 15% concentrations) than on untreated control leaves. The concentration, in which responses were higher, was sprayed in a bean field at 1,000, 1,900 and 3,000 g ha-1. Greater number of beetles was found in plots treated with the highest dosage, 3 and 6 days after spraying. Ten days after spraying, no significant differences were found among dosages, probably due to washoff of the bait.

Identification of Wax Esters in Latent Print Residues by Gas Chromatography-Mass Spectromertry and Their Potential Use as Aging Parameters

Recent studies show that the composition of fingerprint residue varies significantly from the same donor as well as between donors. This variability is a major drawback in latent print dating issues. This study aimed, therefore, at the definition of a parameter that is less variable from print to print, using a ratio of peak area of a target compound degrading over time divided by the summed area of peaks of more stable compounds also found in latent print residues.Gas chromatography-mass spectrometry (GC/MS) analysis of the initial lipid composition of latent prints identifies four main classes of compounds that can be used in the definition of an aging parameter: fatty acids, sterols, sterol precursors, and wax esters (WEs). Although the entities composing the first three groups are quite well known, those composing WEs are poorly reported. Therefore, the first step of the present work was to identify WE compounds present in latent print residues deposited by different donors. Of 29 WEs recorded in the chromatograms, seven were observed in the majority of samples.The identified WE compounds were subsequently used in the definition of ratios in combination with squalene and cholesterol to reduce the variability of the initial composition between latent print residues from different persons and more particularly from the same person. Finally, the influence of a latent print enhancement process on the initial composition was studied by analyzing traces after treatment with magnetic powder, 1,2-indanedione, and cyanoacrylate.

An unusual case of accidental poisoning: fatal methadone inhalation.

In this report, the authors present a case of unusual, accidental methadone intoxication in a 40-year-old man, who had inhaled methadone powder. The drug dealer was a pharmacy technician; methadone had been stolen from a pharmacy and sold as cocaine. After having inhaled methadone powder, he suffered cardiopulmonary arrest. He was admitted to hospital where he died after 24 h of intensive care. The autopsy revealed congestion of internal organs and cerebral and pulmonary edema. Microscopically, the heart showed no changes. The toxicological analyses performed on blood and urine taken at the hospital revealed methadone, cannabinoids, and ethanol. The blood methadone concentration was 290 μg/L. The urine methadone concentration was 160 μg/L. Midazolam and lidocaine, which were administered to the patient at the hospital, were also detected in the blood. The cause of death was determined to be methadone intoxication. The literature has been reviewed and discussed. To date, and to our knowledge, only very few cases of accidental death resulting from methadone inhalation have been described up to the case presented herein.

Effect of Delay in Testing Asphalt Concrete Specimens for Marshall Stability, MLR-86-08, Draft, 1986

The Central Laboratory has been delaying the mix design testing of 2 1/2" X 4" Marshall specimens for stability, until the next day after molding. For example, if the mixes are made and samples molded on Friday a man would have to come in and work on Saturday to test these specimens. The reason for this is that the ASTM-01559 "Resistance to Plastic Flow of Bituminous Mixes Using Marshall Apparatus," states that "the specimens after being molded shall be carefully transferred to a smooth, flat surface and allowed to stand overnight at room temperature, before being weighed, measured and tested." The AASHTO procedure, AASHTO Designation T-245-82 "Resistance to Plastic Flow of Bituminous Mixtures using Marshall Apparatus," does not say when the specimens shall be tested for stability. The IDOT Lab. Specifications, Test Method No. Iowa 502-8 and test method No. Iowa 506-C "compacting asphaltic concrete by the Marshall Method" and "Resistance to Plastic Flow of Bituminous Mixtures Using the Marshall Apparatus," respectively, only state that the specimens shall be cooled before testing. Due to the above conflict in specifications, a number of mix samples were tested, in the Central Lab, for stability on different days. This should furnish enough information to allow us to change the procedure and to test for stability the same day molded, or be able to delay the testing for 3 days or more.

Biofuel Co-Product Uses for Pavement Geo-Materials Stabilization, TR-582, 2010

The production and use of biofuels has increased in the present context of sustainable development. Biofuel production from plant biomass produces not only biofuel or ethanol but also co-products containing lignin, modified lignin, and lignin derivatives. This research investigated the utilization of lignin-containing biofuel co-products (BCPs) in pavement soil stabilization as a new application area. Laboratory tests were conducted to evaluate the performance and the moisture susceptibility of two types of BCP-treated soil samples compared to the performance of untreated and traditional stabilizer-treated (fly ash) soil samples. The two types of BCPs investigated were (1) a liquid type with higher lignin content (co-product A) and (b) a powder type with lower lignin content (co-product B). Various additive combinations (co-product A and fly ash, co-products A and B, etc.) were also evaluated as alternatives to stand-alone co-products. Test results indicate that BCPs are effective in stabilizing the Iowa Class 10 soil classified as CL or A-6(8) and have excellent resistance to moisture degradation. Strengths and moisture resistance in comparison to traditional additives (fly ash) could be obtained through the use of combined additives (co-product A + fly ash; co-product A + co-product B). Utilizing BCPs as a soil stabilizer appears to be one of the many viable answers to the profitability of the bio-based products and the bioenergy business. Future research is needed to evaluate the freeze-thaw durability and for resilient modulus characterization of BCP-modified layers for a variety of pavement subgrade and base soil types. In addition, the long-term performance of these BCPs should be evaluated under actual field conditions and traffic loadings. Innovative uses of BCP in pavement-related applications could not only provide additional revenue streams to improve the economics of biorefineries, but could also serve to establish green road infrastructures.

Self-Consolidating Concrete—Applications for Slip-Form Paving: Phase I (Feasibility Study), 2005

Over-consolidation is often visible as longitudinal vibrator trails in the surface of concrete pavements constructed using slip-form paving. Concrete research and practice have shown that concrete material selection and mix design can be tailored to provide a good compaction without the need for vibration. However, a challenge in developing self-consolidating concrete for slip-form paving (SF SCC) is that the new SF SCC needs to possess not only excellent self-compactibility and stability before extrusion, but also sufficient “green” strength after extrusion, while the concrete is still in a plastic state. The SF SCC to be developed will not be as fluid as the conventional SCC, but it will (1) be workable enough for machine placement, (2) be self-compacting with minimum segregation, (3) hold shape after extrusion from a paver, and (4) have performance properties (strength and durability) compatible to current pavement concrete. The overall objective of this project is to develop a new type of SCC for slip-form paving to produce more workable concrete and smoother pavements, better consolidation of the plastic concrete, and higher rates of production. Phase I demonstrated the feasibility of designing a new type of SF SCC that can not only self-consolidate, but also have sufficient green strength. In this phase, a good balance between flowability and shape stability was achieved by adopting and modifying the mix design of self-consolidating concrete to provide a high content of fine materials in the fresh concrete. It was shown that both the addition of fine particles and the modification of the type of plasticizer significantly improve fresh concrete flowability. The mixes used in this phase were also found to have very good shape stability in the fresh state. Phase II will focus on developing a SF SCC mix design in the lab and a performing a trial of the SF SCC in the field. Phase III will include field study, performance monitoring, and technology transfer.

Origin of needle fibre calcite (NFC) : a geochemical approach

ABSTRACTNeedle fibre calcite (NFC) is one of the most widespread habits of pedogenic calcite. It is a monocrystal of calcite, in the shape of a needle, with a diameter of one micron and a length between 4 and 103 times its width. NFC occurs in soils with different macroscopic and microscopic morphologies. Macroscopically, two main habits of NFC exist: "cotton ball'Mike clusters and as "powder" coating on pebbles inside the soil. It can also act as nucleation sites for precipitation of calcite cements of purely physicochemical origin (LCC - Late Calcitic Cement). Although many studies have been conducted on needle fibre calcite, its origin remains a subject of debate. The NFC having never been reproduced in the laboratory whatever the considered approach, the processes responsible for its precipitation as a so particular morphology remain unexplained. The shift between the length orientation of the needle crystal and the normal axis of calcite growth (c-axis) is also unresolved.Samples taken in two soils observed in quarries (Villiers and Savagnier) in the Swiss Jura Mountains are used to investigate the processes involved in the formation of these calcite crystals in pedogenic environments. Three groups of microscopic morphologies are distinguished: (i) simple needles (SN), (ii) simple needles with overgrowths (SNO), and (iii) simple needles with nanofibres (SNN), nanofibres being either organic or mineral in nature. These groups correspond to different stages in the formation and evolution of NFC.Comparison of carbon and oxygen isotope compositions of NFC with LCC, in relationship with the composition of the carbonate host rock (CHR), and the carbon isotope signature of dissolved inorganic carbon (DIC) from the soil waters, indicates that both NFC and LCC are precipitated in isotopic equilibrium with the soil solution. Similar Ô13C and Ô180 values of the elongated NFC and the rhombohedral calcite crystals of the LCC suggest that the precipitation of these different calcite habits is not due to changes in physicochemical conditions. The growth of NFC crystals inside an organic mould formed by the fungal hyphae could explain the formation of calcite ciystals in the shape of a needle in isotopic equilibrium with the local environment.Strontium and calcium isotope compositions of the three microscopic groups of NFC and LCC were also studied, in order to determine the origin of calcium (Ca2+) entrapped in the calcite lattice and to elucidate the processes responsible for the precipitation of NFC. The 87Sr/86Sr ratio of the SN is closer to the 87Sr/86Sr ratio of the carbonate host rock than the LCC, SNO, and SNN. This could be another clue for the formation of SN inside fungal hyphae, because fungi are known to dissolve the rocks to release and translocate through their hyphae nutrients necessary for their growth. SN and SNN are depleted in Sr and enriched in ^Ca compared to the LCC. In the context of Villiers quarry, where the two ciystal shapes precipitate at similar temperature (in a range of 0,6°C), such variations are the result of a slower precipitation rate of NFC, which is inconsistent with a purely physicochemically precipitated elongate crystal.Finally, NFC is enriched in major and trace elements (i.e. Fe, Zn, Cu, and Mo) compared to the LCC. This enrichment is ascribed to modification in precipitation processes between the NFC and LCC. Right now, it is not possible to preclude the influence of the particular shape of NFC or the biological influence. REEs are not fractionated in NFC, contrary to LCC. Thus, NFC does not precipitate from a percolation solution circulating downward the soil, which should lead to the fractionation of the REEs. As explained above, fungi, are able to dissolve and translocate nutrients. This kind of processes allows releasing elements in the soil solution without fractionation and could explain the particular chemical signature of NFC regarding the REEs.The geochemical approach to investigate the origin of NFC presented in this study does not allow providing direct clues to the fungal origin of NFC, but brings several new insights in the understanding of the formation of such a particular mineral, calcite needles, by precluding definitively their physicochemical origin.RESUMELa calcite en aiguilles (NFC) est l'une des formes les plus ubiquiste de calcite pédogénique. Il s'agit d'un monocrystal de calcite d'un diamètre d'un micron et d'une longueur 4 à 102 fois supérieure à sa largeur. A l'échelle macroscopique, la NFC a été observée sous deux principaux aspects : l'une « cotonneuse » et l'autre formant un mince croûte autour des graviers du sol. La NFC peut également servir de support à la nucléation de ciments secondaires précipités de manière purement physico-chimique (LCC). Malgré les nombreuses études menées sur la NFC, son origine demeure encore inconnue. A ce jour, aucune expérience en laboratoire n'a permis de créer de la calcite en aiguilles, et ce, quelque soit l'approche abordée. Par conséquent, les processus précis responsables de la précipitation calcite avec une telle morphologie restent inconnus. Le décalage existant entre l'axe d'allongement des aiguilles de calcite et l'axe normal de croissance de la calcite (axe c) reste inexpliqué.Des échantillons de NFC, LCC, roche mère, eau de pluie des différents horizons du sol ont été prélevés principalement au front de deux carrières de graviers, ainsi que dans un profil de sol adjacent à ces carrières, dans le but de mieux comprendre les processus à l'origine de la précipitation de calcite en forme d'aiguille. Trois micro-morphologies ont été distinguées: les aiguilles simples (SN), les aiguilles simples avec surcroissances calcitiques (SNO) et enfin les aiguilles simples avec nanofibres (SNN), celles-ci pouvant être de minérales ou organiques. Ces groupes, d'après nos résultats et les études antérieures pourraient correspondre à différentes étapes de formation de la calcite en aiguilles.Dans un premier temps, la comparaison des signatures isotopiques de la calcite en aiguilles, du LCC, de la roche mère et du carbone inorganique dissout dans la solution du sol (CID) indique que la NFC, tout comme le LCC, précipite en équilibre avec la solution du sol. Les valeurs similaires en Ô13C et δ180 de cristaux de calcite allongés (NFC) et rhombohédriques (LCC) formés dans un même milieu suggère que ces différences morphologiques ne peuvent pas être attribuées à des modifications purement physico-chimiques. La croissance de NFC à l'intérieur d'un moule organique comme les hyphes de champignons semble être la seule hypothèse plausible permettant d'expliquer la formation de monocrystaux allongés de calcite en équilibre avec leur environnement.La composition isotopique en strontium (Sr) et calcium (Ca) des LCC et des trois micro¬morphologies de la NFC ont été étudiées également, afin de déterminer l'origine du Ca2+ présent dans le réseau cristallin de la calcite en aiguilles, ainsi que les processus responsables de la formation de NFC. Les valeurs du rapport 87Sr/86$r de la forme SN sont les plus proches de celles de la roche mère par rapport aux formes SNN et SNO et du LCC. Ceci pourrait être un nouvel indice de l'implication des champignons dans la précipitation de calcite en aiguilles, puisqu'ils sont connus pour avoir la capacité de dissoudre les roches afin de libérer les nutriments nécessaires à leur croissance, ainsi que de les transloquer par leurs hyphes. De plus, les formes SN et SNN sont appauvries en Sr et enrichies en "Ca, comparativement au LCC. Dans le sol étudié, tous les carbonates de calcium précipitent à la même température, par conséquent, de telles variations sont dues à un taux de précipitation plus lent de SN et SNN, ce qui est contradictoire avec l'hypothèse physico-chimique. Pour finir, la NFC est enrichie en certains éléments majeurs et traces (i.e. Fe, Zn, Cu et Mo) par rapport au LCC. Ceci peut être attribué à différents processus de formation entre la NFC et le LCC. Pour le moment il est impossible d'exclure l'influence de la forme particulière de la NFC ou celle du champignon. Les terres rares (REEs) ne sont pas fractionnées dans la NFC, contrairement au LCC. Ceci peut être expliqué par le fait que la NFC précipite à partir d'une solution qui n'a pas percolé à travers le sol. Les champignons en dissolvant les roches mettent en solution éléments sans les fractionner. L'approche géochimique de l'étude de la calcite en aiguilles ne permets pas de produire des preuves directes sur sa potentielle origine fongique, mais permet de mieux comprendre comment un minéral aussi singulier que la NFC peut se former. D'autre pare cette étude permets d'exclure définitivement l'hypothèse physico-chimique de l'origine de la calcite en aiguilles

Isothermal sections of the Ru-Si-Ge, Ru-Ge-Sn and Ru-Si-Sn systems at 900°C

The ternary systems Ruthenium-Silicon-Germanium, Ruthenium-Germanium-Tin and Ruthenium-Silicon-Tin were investigated by powder X-ray diffraction and electron microprobe analysis. Relations at 900 degrees C between solid phases are given and no ternary compound was found. Solubilities and evolution of lattice parameters have been correlated. Maximum mutual solubilities in the Si-Sn and Ge-Sn systems are given. (C) 1998 Elsevier Science S.A.

Tarkkuusannostelulaitteen kehittäminen

Prosessiteollisuuden aloilla, kuten lasin raaka-ainelaitoksissa ja laasti- ja tasoitetehtaissa, prosessin onnistumisen kannalta jauhemaisten raaka-aineiden tarkka annostelu on avainasemassa. Diplomityön tarkoituksena oli kehittää olemassa olevan idean pohjalta uusi materiaalin annostelulaite jauhemaisille ja fluidisoituville aineille. Tavoitteena oli suunnitella annostelulaite toimivalle prototyyppiasteelle ja saamaan siitä informaatiota materiaalilaboratoriossa tehtävien annostuskokeiden avulla. Työssä tarkasteltiin aluksi yleisesti jauhemaisen aineen ominaisuuksia ja ongelmia, tyypillisiä annostelulaitteita ja annostustarkkuuteen ja punnitustarkkuuteen vaikuttavia tekijöitä. Varsinainen laitekehitys eteni tyypillisen tuotekehitystyön mukaisesti. Annostuslaite kattaa laaj an dynaamisen toiminta-alueen eli massavirran säätömandollisuus on samalla toimilaitteella aikaisempia annostelulaitteita laajempi. Laite soveltuu erittäin tarkkaan annostukseen hyvin lyhyellä annostusajalla. Hyvät ja luotettavat annostusjärjestelmät myötävaikuttavat merkittävästi koko tehdaskaupan saamiseen, koska asiakas säästää työvoimakustannuksissa ja laatukustannuksissa. Kehittämällä jauhemaisten aineiden annostusta saadaan tekninen etumatka kilpailijoihin nähden.

Plasmapolttoprosessin kehittäminen ja optimointi

Ydinvoimaloidenprimaarivesikierron puhdistukseen käytetään ioninvaihtohartsia. Käytönjälkeen ioninvaihtohartsi luokitellaan matalaja keskiaktiivisiin jätteisiin. Plasmakäsittelyllä käytetyn ioninvaihtohartsin tilavuutta voidaan pienentää sekä sen orgaaninen luonne poistaa. Plasmakäsittelyn tarkoituksena on hapettaa orgaaninen aines oksideiksi, jotka poistuvat prosessista savukaasuina. Epäorgaaninen aines, joka sisältää radioaktiivisen aineksen, on tarkoitus hapettaa oksideiksi ja sulfideiksi, jotka voidaan kerätä talteen tuhkana. Tässä diplomityössä käsitellään käytetyn ioninvaihtohartsin käsittelyyn suunnitellun plasmapolttoprosessin kehittämistä ja optimointia. Ioninvaihtohartsin plasmakäsittelyssä syntyvien reaktiotuotteiden selvittäminen suoritettiin tarkastelemalla ainetaseita sekä aihetta käsitteleviä tutkimuksia. Näiden perusteella parannettiin jäähdytystä, suunniteltiin jatkuvatoiminen syöttömenetelmä sekä laadittiin toimintaalueen reunaehdot laitteistolle. Koelaitteistossa 6,5 kW:n rfteho syötetään sovitinpiirin ja kuparisen induktiokelan kautta plasmaan. Plasmakaasuna on käytetty hapenja argonin seoskaasua. Plasmapolttoa on seurattu massaspektrometrilla, optisella emissiospektrometrilla, lämpösekä painemittareilla. Laskennan ja kokeiden pohjalta selvitettiin optimaalinen seossuhde plasmakaasulle, paineen ja tehon noston vaikutus hartsin polttonopeuteen sekä jatkuvatoimisen syöttömenetelmän edut panostoimiseen syöttöön. Rfgeneraattorin teho rajoitti jatkuvatoimisen polttonopeuden 130 g/h ja hetkellisen polttonopeuden 175 g/h. Radioaktiivisten aineiden pidätys oli 93,5 % cesiumin osalta. Tulosten perusteella 4 kg/h ioninvaihtohartsia polttavan laitteiston tehon lähteeksi tarvitaan 65 kW rfgeneraattori. Palamattoman hartsin ja tuhkan kulkeutuminen partikkelisuodattimille sekä reaktiotuotteena syntyvien rikinoksidien käsittely vaatii vielä jatkotutkimusta.