A pilot plant for fish protein concentrate

This communication deals with the design aspect and functions of individual pieces of equipment of a pilot plant of fifty kg capacity for the production of fish protein concentrate (FPC) per day. Design is based on a solvent extraction process of wet pressed cake with an azeotropic mixture of hexane and ethyl alcohol. A flow sheet for the process and equipment layout has been indicated.

Pilot plant for production of fish ensilage and the economics of production

This communication describes the design aspect and functions of individual pieces of equipment of a pilot plant for the production of fish ensilage based on lactic acid fermentation process. Details about the equipment, process flow sheet and equipment layout of the pilot plant have been given. An attempt has been made to prepare an estimate of the cost of production of liquid ensilage and solid feed mix.

Ipil-ipil (Leucaena leucocephala) leaves as a plant protein source in prawn diets

Penaeus monodon juveniles were fed diets containing fish meal, shrimp head meal and ipil-ipil leaves soaked and unsoaked, local and peruvian varieties. Mean weight gain at the end of 8 wk was significantly highest among those given the diet containing commercial ipil-ipil leaves. Gain in length followed the same pattern as mean weight gains. Among the diets containing ipil-ipil leaves there was a direct relationship in the amount of mimosine in the diet and the survival rate, the lower the amount of mimosine (due to soaking) the higher the survival rate. The Results thus indicate the beneficial effect of the addition of commercial ipil-ipil leaves to the diets of prawns, providing the mimosine content is kept low by soaking. A reduce in costs is also obtained, since 1kg of shrimp head meal or fish costs more than 2 or 4 tons, respectively, than that of ipil-ipil foliage.

High rate of chimeric gene origination by retroposition in plant genomes

Retroposition is widely found to play essential roles in origination of new mammalian and other animal genes. However, the scarcity of retrogenes in plants has led to the assumption that plant genomes rarely evolve new gene duplicates by retroposition, de

Anti-HIV-1 activities of extracts from the medicinal plant Rhus chinensis

Rhus chinensis, a species used in folk medicine by Chinese native people, the anti-HIV-1 activities of the petroleum ether, ethyl acetate, butanol and aqueous extract of Rhus chinensis, named as RC-1, RC-2, RC-3 and RC-4, respectively, was evaluated. The

Anti-HIV-1 activities of compounds isolated from the medicinal plant Rhus chinensis

Aim of the study: Previously, we reported that the petroleum ether fraction, RC-1, and EtOAc fraction, RC-2, of the medicinal plant Rhus chinensis showed potent anti-HIV-1 activities. To address anti-HIV-1 constituents of RC-1 and RC-2, 17 compounds were

Optimisation of fuel usage and steam availability in the power and steam plant of a paper mill

This paper presents the results of a project aimed at minimising fuel usage while maximising steam availability in the power and steam plant of a large newsprint mill. The approach taken was to utilise the better regulation and plant wide optimisation capabilities of Advanced Process Control, especially Model Predictive Control (MPC) techniques. These have recently made their appearance in the pulp and paper industry but are better known in the oil and petrochemical industry where they have been used for nearly 30 years. The issue in the power and steam plant is to ensure that sufficient steam is available when the paper machines require it and yet not to have to waste too much steam when one or more of the machines suffers an outage. This is a problem for which MPC is well suited. It allows variables to be kept within declared constraint ranges, a feature which has been used, effectively, to increase the steam storage capacity of the existing plant. This has resulted in less steam being condensed when it is not required and in significant reductions in the need for supplementary firing. The incidence of steam being dump-condensed while also supplementary firing the Combined Heat & Power (CHP) plant has been reduced by 95% and the overall use of supplementary firing is less than 30% of what it was. In addition the plant runs more smoothly and requires less operator time. The yearly benefit provided by the control system is greater than £200,000, measured in terms of 2005 gas prices.

Cinematographic OH-PLIF measurements of two interacting turbulent premixed flames with and without acoustic forcing

This paper describes an experimental investigation into the interactions that occur between two lean turbulent premixed flames stabilised on conical bluff-bodies when they are moved closer together. Cinematographic OH-PLIF measurements were acquired to investigate adjacent flame front interactions as a function of flame separation distance (S). Flame surface density (FSD) and curvature were determined to characterise the unforced flames. Acoustic forcing was then applied to explore the amplitude dependent thermo-acoustic response. Phase-averaged FSD and global heat release measurements in the form of OH * chemiluminescence were obtained for a range of forcing frequencies (f) and amplitudes (A) as a function of S. As the flames were brought closer together the adjacent annular jets were found to merge into a single jet structure. This caused adjacent flame fronts to merge above the wake region between the two flames at a location determined by the jet efflux (flame angle) and S. This region of flame-flame interaction we refer to as 'interacting region'. In the unforced flames, a trend of increasingly negative curvature for decreasing S produced a small net increase in flame surface area via cusp formation. When subjected to acoustic forcing, S-dependent regimes were found in the global heat release response as a function A. The overall trend showed that the occurrence of jet/flame merging reduces the value of A at which non-linear response occurs. In support of previous findings for flames stabilised along shear layers, the phase-averaged FSD showed that the flame dynamics that drive the thermo-acoustic response result from the roll-up of vortices which generate large-scale vortex-flame interactions. Compared with axisymmetric flames, the occurrence of jet merging alters the vortex-flame interactions resulting in an asymmetric contribution to the heat release between the wall and interacting regions. The majority of the heat release was found to occur in the interacting region through the rapid production and destruction of flame surface area. The occurrence of jet merging and large-scale interactions between adjacent flames result in different physical mechanisms that drive the thermo-acoustic response compared with single axisymmetric flames. © 2011.

Control of meiotic recombination frequency in plant genomes.

Sexual eukaryotes reproduce via the meiotic cell division, where ploidy is halved and homologous chromosomes undergo reciprocal genetic exchange, termed crossover (CO). CO frequency has a profound effect on patterns of genetic variation and species evolution. Relative CO rates vary extensively both within and between plant genomes. Plant genome size varies by over 1000-fold, largely due to differential expansion of repetitive sequences, and increased genome size is associated with reduced CO frequency. Gene versus repeat sequences associate with distinct chromatin modifications, and evidence from plant genomes indicates that this epigenetic information influences CO patterns. This is consistent with data from diverse eukaryotes that demonstrate the importance of chromatin structure for control of meiotic recombination. In this review I will discuss CO frequency patterns in plant genomes and recent advances in understanding recombination distributions.