Differential evolution based classification with pool of distances and aggregation operators

The objective of this thesis is to develop and generalize further the differential evolution based data classification method. For many years, evolutionary algorithms have been successfully applied to many classification tasks. Evolution algorithms are population based, stochastic search algorithms that mimic natural selection and genetics. Differential evolution is an evolutionary algorithm that has gained popularity because of its simplicity and good observed performance. In this thesis a differential evolution classifier with pool of distances is proposed, demonstrated and initially evaluated. The differential evolution classifier is a nearest prototype vector based classifier that applies a global optimization algorithm, differential evolution, to determine the optimal values for all free parameters of the classifier model during the training phase of the classifier. The differential evolution classifier applies the individually optimized distance measure for each new data set to be classified is generalized to cover a pool of distances. Instead of optimizing a single distance measure for the given data set, the selection of the optimal distance measure from a predefined pool of alternative measures is attempted systematically and automatically. Furthermore, instead of only selecting the optimal distance measure from a set of alternatives, an attempt is made to optimize the values of the possible control parameters related with the selected distance measure. Specifically, a pool of alternative distance measures is first created and then the differential evolution algorithm is applied to select the optimal distance measure that yields the highest classification accuracy with the current data. After determining the optimal distance measures for the given data set together with their optimal parameters, all determined distance measures are aggregated to form a single total distance measure. The total distance measure is applied to the final classification decisions. The actual classification process is still based on the nearest prototype vector principle; a sample belongs to the class represented by the nearest prototype vector when measured with the optimized total distance measure. During the training process the differential evolution algorithm determines the optimal class vectors, selects optimal distance metrics, and determines the optimal values for the free parameters of each selected distance measure. The results obtained with the above method confirm that the choice of distance measure is one of the most crucial factors for obtaining higher classification accuracy. The results also demonstrate that it is possible to build a classifier that is able to select the optimal distance measure for the given data set automatically and systematically. After finding optimal distance measures together with optimal parameters from the particular distance measure results are then aggregated to form a total distance, which will be used to form the deviation between the class vectors and samples and thus classify the samples. This thesis also discusses two types of aggregation operators, namely, ordered weighted averaging (OWA) based multi-distances and generalized ordered weighted averaging (GOWA). These aggregation operators were applied in this work to the aggregation of the normalized distance values. The results demonstrate that a proper combination of aggregation operator and weight generation scheme play an important role in obtaining good classification accuracy. The main outcomes of the work are the six new generalized versions of previous method called differential evolution classifier. All these DE classifier demonstrated good results in the classification tasks.

Effect of metabolic control on interferon-gamma and interleukin-10 production by peripheral blood mononuclear cells from type 1 and type 2 diabetic patients

The objective of the present study was to evaluate the production of cytokines, interferon-g (INF-g) and interleukin-10 (IL-10), in cultures of peripheral blood mononuclear cells (PBMC) from type 1 and type 2 diabetic patients and to correlate it with inadequate and adequate metabolic control. We studied 11 type 1 and 13 type 2 diabetic patients and 21 healthy individuals divided into two groups (N = 11 and 10) paired by sex and age with type 1 and type 2 diabetic patients. The PBMC cultures were stimulated with concanavalin-A to measure INF-g and IL-10 supernatant concentration by ELISA. For patients with inadequate metabolic control, the cultures were performed on the first day of hospitalization and again after intensive treatment to achieve adequate control. INF-g levels in the supernatants of type 1 diabetic patient cultures were higher compared to type 2 diabetic patients with adequate metabolic control (P < 0.001). Additionally, INF-g and IL-10 tended to increase the liberation of PBMC from type 1 and 2 diabetic patients with adequate metabolic control (P = 0.009 and 0.09, respectively). The increased levels of INF-g and IL-10 released from PBMC of type 1 and 2 diabetic patients with adequate metabolic control suggest that diabetic control improves the capacity of activation and maintenance of the immune response, reducing the susceptibility to infections.

The selective and non-selective cyclooxygenase inhibitors valdecoxib and piroxicam induce the same postoperative analgesia and control of trismus and swelling after lower third molar removal

We compared the clinical efficacy of orally administered valdecoxib and piroxicam for the prevention of pain, trismus and swelling after removal of horizontally and totally intrabony impacted lower third molars. Twenty-five patients were scheduled to undergo removal of symmetrically positioned lower third molars in two separate appointments. Valdecoxib (40 mg) or piroxicam (20 mg) was administered in a double-blind, randomized and crossed manner for 4 days after the surgical procedures. Objective and subjective parameters were recorded for comparison of postoperative courses. Both agents were effective for postoperative pain relief (N = 19). There was a similar mouth opening at suture removal compared with the preoperative values (86.14 ± 4.36 and 93.12 ± 3.70% of the initial measure for valdecoxib and piroxicam, respectively; ANOVA). There was no significant difference regarding the total amount of rescue medication taken by the patients treated with valdecoxib or piroxicam (173.08 ± 91.21 and 461.54 ± 199.85 mg, respectively; Wilcoxon test). There were no significant differences concerning the swelling observed on the second postoperative day compared to baseline measures (6.15 ± 1.84 and 8.46 ± 2.04 mm for valdecoxib and piroxicam, respectively; ANOVA) or on the seventh postoperative day (1.69 ± 1.61 and 2.23 ± 2.09 mm for valdecoxib and piroxicam, respectively; ANOVA). The cyclooxygenase-2 selective inhibitor valdecoxib is as effective as the non-selective cyclooxygenase inhibitor piroxicam for pain, trismus and swelling control after removal of horizontally and totally intrabony impacted lower third molars.

Immune strategies using single-component LipL32 and multi-component recombinant LipL32-41-OmpL1 vaccines against leptospira

Genes encoding lipoproteins LipL32, LipL41 and the outer-membrane protein OmpL1 of leptospira were recombined and cloned into a pVAX1 plasmid. BALB/c mice were immunized with LipL32 and recombined LipL32-41-OmpL1 using DNA-DNA, DNA-protein and protein-protein strategies, respectively. Prime immunization was on day 1, boost immunizations were on day 11 and day 21. Sera were collected from each mouse on day 35 for antibody, cytokine detection and microscopic agglutination test while spleen cells were collected for splenocyte proliferation assay. All experimental groups (N = 10 mice per group) showed statistically significant increases in antigen-specific antibodies, in cytokines IL-4 and IL-10, as well as in the microscopic agglutination test and splenocyte proliferation compared with the pVAX1 control group. The groups receiving the recombined LipL32-41-OmpL1 vaccine induced anti-LipL41 and anti-OmpL1 antibodies and yielded better splenocyte proliferation values than the groups receiving LipL32. DNA prime and protein boost immune strategies stimulated more antibodies than a DNA-DNA immune strategy and yielded greater cytokine and splenocyte proliferation than a protein-protein immune strategy. It is clear from these results that recombination of protective antigen genes lipL32, lipL41, and ompL1 and a DNA-protein immune strategy resulted in better immune responses against leptospira than single-component, LipL32, or single DNA or protein immunization.

Follow-up of patients treated with retinoic acid for the control of radioiodine non-responsive advanced thyroid carcinoma

During thyroid tumor progression, cellular de-differentiation may occur and it is commonly accompanied by metastatic spread and loss of iodine uptake. Retinoic acid (RA) administration might increase iodine uptake in about 40% of patients, suggesting that RA could be a promising therapeutic option for radioiodine non-responsive thyroid carcinoma, although a prospective study with a long-term follow-up has not been reported. This was a clinical prospective study assessing the value of 13-cis-RA in patients with advanced thyroid carcinoma and its impact on major outcomes such as tumor regression and cancer-related death with a long-term follow-up of patients submitted to radioiodine (131I) therapy after RA administration. Sixteen patients with inoperable disease and no significant radioiodine uptake on post-therapy scan were selected. Patients were treated orally with 13-cis-RA at a dose of 1.0 to 1.5 mg·kg-1·day-1 for 5 weeks and then submitted to radioiodine therapy (150 mCi) after thyroxine withdrawal. A whole body scan was obtained 5 to 7 days after the radioactive iodine therapy. RECIST criteria were used to evaluate the response. An objective partial response rate was observed in 18.8%, a stable disease rate in 25% and a progression disease rate in 56.2%. Five patients died (62.5%) in the group classified as progression of disease. Progression-free survival rate (PFS) ranged from 72 to 12 months, with a median PFS of 26.5 months. RA may be an option for advanced de-differentiated thyroid cancer, due to the low rate of side effects.

Vancomycin-resistant enterococcus outbreak in a pediatric intensive care unit: report of successful interventions for control and prevention

The objective of this study is to retrospectively report the results of interventions for controlling a vancomycin-resistant enterococcus (VRE) outbreak in a tertiary-care pediatric intensive care unit (PICU) of a University Hospital. After identification of the outbreak, interventions were made at the following levels: patient care, microbiological surveillance, and medical and nursing staff training. Data were collected from computer-based databases and from the electronic prescription system. Vancomycin use progressively increased after March 2008, peaking in August 2009. Five cases of VRE infection were identified, with 3 deaths. After the interventions, we noted a significant reduction in vancomycin prescription and use (75% reduction), and the last case of VRE infection was identified 4 months later. The survivors remained colonized until hospital discharge. After interventions there was a transient increase in PICU length-of-stay and mortality. Since then, the use of vancomycin has remained relatively constant and strict, no other cases of VRE infection or colonization have been identified and length-of-stay and mortality returned to baseline. In conclusion, we showed that a bundle intervention aiming at a strict control of vancomycin use and full compliance with the Hospital Infection Control Practices Advisory Committee guidelines, along with contact precautions and hand-hygiene promotion, can be effective in reducing vancomycin use and the emergence and spread of vancomycin-resistant bacteria in a tertiary-care PICU.

Psychiatric disorders and cardiac anxiety in exercising and sedentary coronary artery disease patients: a case-control study

Regular physical exercise has been shown to favorably influence mood and anxiety; however, there are few studies regarding psychiatric aspects of physically active patients with coronary artery disease (CAD). The objective of the present study was to compare the prevalence of psychiatric disorders and cardiac anxiety in sedentary and exercising CAD patients. A total sample of 119 CAD patients (74 men) were enrolled in a case-control study. The subjects were interviewed to identify psychiatric disorders and responded to the Cardiac Anxiety Questionnaire. In the exercise group (N = 60), there was a lower prevalence (45 vs 81%; P < 0.001) of at least one psychiatric diagnosis, as well as multiple comorbidities, when compared to the sedentary group (N = 59). Considering the Cardiac Anxiety Questionnaire, sedentary patients presented higher scores compared to exercisers (mean ± SEM = 55.8 ± 1.9 vs 37.3 ± 1.6; P < 0.001). In a regression model, to be attending a medically supervised exercise program presented a relevant potential for a 35% reduction in cardiac anxiety. CAD patients regularly attending an exercise program presented less current psychiatric diagnoses and multiple mental-related comorbidities and lower scores of cardiac anxiety. These salutary mental effects add to the already known health benefits of exercise for CAD patients.

Placental hydroxymethylation vsmethylation at the imprinting control region 2 on chromosome 11p15.5

In addition to methylated cytosines (5-mCs), hydroxymethylcytosines (5-hmCs) are present in CpG dinucleotide-enriched regions and some transcription regulator binding sites. Unlike methylation, hydroxymethylation does not result in silencing of gene expression, and the most commonly used methods to study methylation, such as techniques based on restriction enzymatic digestion and/or bisulfite modification, are unable to distinguish between them. Genomic imprinting is a process of gene regulation where only one member of an allelic pair is expressed depending on the parental origin. Chromosome 11p15.5 has an imprinting control region (ICR2) that includes a differentially methylated region (KvDMR1) that guarantees parent-specific gene expression. The objective of the present study was to determine the presence of 5-hmC at the KvDMR1 in human placentas. We analyzed 16 third-trimester normal human placentas (chorionic villi). We compared two different methods based on real-time PCR after enzymatic digestion. The first method distinguished methylation from hydroxymethylation, while the other method did not. Unlike other methylation studies, subtle variations of methylation in ICRs could represent a drastic deregulation of the expression of imprinted genes, leading to important phenotypic consequences, and the presence of hydroxymethylation could interfere with the results of many studies. We observed agreement between the results of both methods, indicating the absence of hydroxymethylation at the KvDMR1 in third-trimester placentas. To the best of our knowledge, this is the first study describing the investigation of hydroxymethylation in human placenta using a genomic imprinting model.

Novel control, haptic and calibration methods for teleoperated electrohydraulic servo systems

The aim of this thesis is to propose a novel control method for teleoperated electrohydraulic servo systems that implements a reliable haptic sense between the human and manipulator interaction, and an ideal position control between the manipulator and the task environment interaction. The proposed method has the characteristics of a universal technique independent of the actual control algorithm and it can be applied with other suitable control methods as a real-time control strategy. The motivation to develop this control method is the necessity for a reliable real-time controller for teleoperated electrohydraulic servo systems that provides highly accurate position control based on joystick inputs with haptic capabilities. The contribution of the research is that the proposed control method combines a directed random search method and a real-time simulation to develop an intelligent controller in which each generation of parameters is tested on-line by the real-time simulator before being applied to the real process. The controller was evaluated on a hydraulic position servo system. The simulator of the hydraulic system was built based on Markov chain Monte Carlo (MCMC) method. A Particle Swarm Optimization algorithm combined with the foraging behavior of E. coli bacteria was utilized as the directed random search engine. The control strategy allows the operator to be plugged into the work environment dynamically and kinetically. This helps to ensure the system has haptic sense with high stability, without abstracting away the dynamics of the hydraulic system. The new control algorithm provides asymptotically exact tracking of both, the position and the contact force. In addition, this research proposes a novel method for re-calibration of multi-axis force/torque sensors. The method makes several improvements to traditional methods. It can be used without dismantling the sensor from its application and it requires smaller number of standard loads for calibration. It is also more cost efficient and faster in comparison to traditional calibration methods. The proposed method was developed in response to re-calibration issues with the force sensors utilized in teleoperated systems. The new approach aimed to avoid dismantling of the sensors from their applications for applying calibration. A major complication with many manipulators is the difficulty accessing them when they operate inside a non-accessible environment; especially if those environments are harsh; such as in radioactive areas. The proposed technique is based on design of experiment methodology. It has been successfully applied to different force/torque sensors and this research presents experimental validation of use of the calibration method with one of the force sensors which method has been applied to.

Physicochemical analyses indicated to the quality control of royal jelly with honey

Royal jelly (RJ) is used as a revitalizing tonic. In order to avoid rejection to its acid taste, it is added to honey. There are regulations for honey and for royal jelly separately but not for the mixture. The objective of this work is, therefore, to verify if the same methods used for pure honey quality control can be used for honey mixed with royal jelly and also the presence of RJ through 10-HDA determination. The methods used were: moisture, reducing sugars, apparent sucrose, ash, hydroxymethylfurfural, insoluble solids, diastase activity, acidity and 10-HDA. Samples were prepared by adding 0-100% of RJ in honey. The results showed that the ash method was the only suitable one to all the samples. The acidity analysis (direct titration) was suitable to 0-30%RJ samples; the reducing sugar analysis was suitable to 0-20% RJ samples. Concerning moisture analysis the refractometric method is suitable to 0-10% RJ and the Infra Red method is suggested to be used for samples with more than 10% RJ. The methods for diastase activity, HMF, apparent sucrose and insoluble solids were inadequate for all samples with RJ. The presence of RJ in the samples was confirmed by the 10-HDA analyses.

Influence of multi-phase phenomena on semibatch crystallization processes of aqueous solutions

Crystal properties, product quality and particle size are determined by the operating conditions in the crystallization process. Thus, in order to obtain desired end-products, the crystallization process should be effectively controlled based on reliable kinetic information, which can be provided by powerful analytical tools such as Raman spectrometry and thermal analysis. The present research work studied various crystallization processes such as reactive crystallization, precipitation with anti-solvent and evaporation crystallization. The goal of the work was to understand more comprehensively the fundamentals, phenomena and utilizations of crystallization, and establish proper methods to control particle size distribution, especially for three phase gas-liquid-solid crystallization systems. As a part of the solid-liquid equilibrium studies in this work, prediction of KCl solubility in a MgCl2-KCl-H2O system was studied theoretically. Additionally, a solubility prediction model by Pitzer thermodynamic model was investigated based on solubility measurements of potassium dihydrogen phosphate with the presence of non-electronic organic substances in aqueous solutions. The prediction model helps to extend literature data and offers an easy and economical way to choose solvent for anti-solvent precipitation. Using experimental and modern analytical methods, precipitation kinetics and mass transfer in reactive crystallization of magnesium carbonate hydrates with magnesium hydroxide slurry and CO2 gas were systematically investigated. The obtained results gave deeper insight into gas-liquid-solid interactions and the mechanisms of this heterogeneous crystallization process. The research approach developed can provide theoretical guidance and act as a useful reference to promote development of gas-liquid reactive crystallization. Gas-liquid mass transfer of absorption in the presence of solid particles in a stirred tank was investigated in order to gain understanding of how different-sized particles interact with gas bubbles. Based on obtained volumetric mass transfer coefficient values, it was found that the influence of the presence of small particles on gas-liquid mass transfer cannot be ignored since there are interactions between bubbles and particles. Raman spectrometry was successfully applied for liquid and solids analysis in semi-batch anti-solvent precipitation and evaporation crystallization. Real-time information such as supersaturation, formation of precipitates and identification of crystal polymorphs could be obtained by Raman spectrometry. The solubility prediction models, monitoring methods for precipitation and empirical model for absorption developed in this study together with the methodologies used gives valuable information for aspects of industrial crystallization. Furthermore, Raman analysis was seen to be a potential controlling method for various crystallization processes.

Effects of different concentrations of passion fruit peel (Passiflora edulis) on the glicemic control in diabetic rat

Diabetes mellitus, an endocrine disorder, is the major cause of morbidity in developing countries, and it is considered the fourth leading cause of death worldwide. The conventional therapy for diabetes is insulin treatment. The peel of the Passion fruit is rich in fiber and prevents the absorption of carbohydrates, and thus can control and reduce the blood sugar rate. The objective of this study was to analyze the effect of the passion fruit peel flour on the glicemia of diabetic rats, as well as to study the probable action mechanisms. Wistar rats were used in the experiment and were offered the flours of the passion fruit peel in three concentrations: 5, 10, and 15%, and a casein diet as control. The most significant effect on the reduction of the glicemic rate was obtained with the 5% diet. The best values of hepatic glycogen were found in the 5 and 10% diets. The results of this study suggest that the 5% passion fruit flour diet was the one that provided the best reduction of blood glucose levels (59%) and the higher increase of the hepatic glycogen level (71%). The conversion of blood glucose into hepatic glycogen was considered the probable action mechanism involved.

Utilization of multi-branding in business to business markets

Case company utilizes multi-branding strategy (or house of brands strategy) in its product portfolio. In practice the company has multiple brands – one main brand and four acquired brands – which all utilize one single product platform. The objective of this research is to analyze case company’s multi-branding strategy and its benefits and challenges. Moreover, the purpose is to clarify that how could a company in B2B markets utilize multi-branding strategy more efficiently and profitably. The theoretical part of this thesis consists of aspects of branding strategies; different brand name architectures, benefits and challenges of different strategies and different ways of utilize branding strategies in mergers and acquisitions. The empirical part, on the other hand, includes the description of the case company’s branding strategy and the employees’ perspective on the benefits and challenges of multi-branding strategy, and how to utilize it more efficiently and profitably. This study shows, that the major benefits of utilizing multi-branding are lower production costs, ability to reach wider market coverage, possibility to utilize common sales tools, synergies in R&D and shared resources. On the other hand, the major challenges are lack of product differentiation, internal competition, branding issues in production and deliveries, pricing issues and conflicts, and compromises in product compatibility and suitability. Based on the results, several ways to utilize multi-branding strategy more efficiently and profitably were found; by putting more effort on brand image and product differentiation, by having more co-operation among the brands and by focusing on more precise customer and market segmentation.

The impact of tobacco control policies on university students' smoking in Ontario

Objective. Despite steady declines in the prevalence of tobacco use among Canadians, young adult tobacco use has remained stubbornly high over the past two decades (CTUMS, 2005a). Currently in Ontario, young adults have the highest proportion of smokers of all age cohorts at 26%. A growing body of evidence shows that smoking restrictions and other tobacco control policies can reduce tobacco use and consumption among adults and deter initiation among youth; whether young adult university students' smoking participation is influenced by community smoking restrictions, campus tobacco control policies or both remains an empirical question. The purpose of this study is to examine the relationship among current smoking status of students on university campuses across Ontario and various tobacco control policies, 3including clean air bylaws of students' home towns, clean air by-laws of the community where the university is situated, and campus policies. Methods. Two data sets were used. The 200512006 Tobacco Use in a Representative Sample of Post-Secondary Students data set provides information about the tobacco use of 10,600 students from 23 universities and colleges across Ontario. Data screening for this study reduced the sample to 5,114 17-to-24 year old undergraduate students from nine universities. The second data set is researcher-generated and includes information about strength and duration of, and students' exposure to home town, local and campus tobacco control policies. Municipal by-laws (of students' home towns and university towns) were categorized as weak, moderate or strong based on criteria set out in the Ontario Municipal By-law Report; campus policies were categorized in a roughly parallel fashion. Durations of municipal and campus policies were calculated; and length of students' exposure to the policies was estimated (all in months). Multinomial logistic regression analyses were used to examine the relationship between students' current smoking status (daily, less-than-daily, never-smokers) and the following policy measures: strength of, duration of, and students' exposure to campus policy; strength of, duration of, and students' exposure to the by-law in the university town; and, strength of, duration of, and students' exposure to the by-law in the home town they grew up in. Sociodemographic variables were controlled for. Results. Among the Ontario university students surveyed, 7.0% currently use tobacco daily and 15.4% use tobacco less-than-daily. The proportions of students experiencing strong tobacco control policies in their home town, the community in which their university is located and at their current university were 33.9%,64.1 %, and 31.3% respectively. However, 13.7% of students attended a university that had a weak campus policy. Multinomial logistic regressions suggested current smoking status was associated with university town by-law strength, home town by-law strength and the strength of the campus tobacco control policy. In the fmal model, after controlling for sociodemographic factors, a strong by-law in the university town and a strong by-law in students' home town were associated with reduced odds of being both a less-than-daily (OR = 0.64, 95%CI: 0.48-0.86; OR = 0.80, 95%CI: 0.66-0.95) and daily smoker (OR = 0.59, 95%CI: 0.39-0.89; OR = 0.76, 95%CI: 0.58-0.99), while a weak campus tobacco control policy was associated with higher odds of being a daily smoker (OR = 2.08, 95%CI: 1.31-3.30) (but unrelated to less-than-daily smoking). Longer exposure to the municipal by-law (OR = 0.93; 95%CI: 0.90-0.96) was also related to smoking status. Conclusions. Students' smoking prevalence was associated with the strength of the restrictions in university, and with campus-specific tobacco control policies. Lessthan- daily smoking was not as strongly associated with policy measures as daily smoking was. University campuses may wish to adopt more progressive campus policies and support clean air restrictions in the broader community. More research is needed to determine the direction of influence between tobacco control policies and students' smoking.

Prostate Cancer and the Search for Novel Biomarkers

The primary objective of this research project was to identify prostate cancer (PCa) -specific biomarkers from urine. This was done using a multi-faceted approach that targeted (1) the genome (DNA); (2) the transcriptome (mRNA and miRNA); and (3) the proteome. Toward this end, urine samples were collected from ten healthy individuals, eight men with PCa and twelve men with enlarged, non-cancerous prostates or with Benign Prostatic Hyperplasia (BPH). Urine samples were also collected from the same patients (PCa and BPH) as part of a two-year follow-up. Initially urinary nucleic acids and proteins were assessed both qualitatively and quantitatively for characteristics either unique or common among the groups. Subsequently macromolecules were pooled within each group and assessed for either protein composition via LC-MS/MS or microRNA (miRNA) expression by microarray. A number of potential candidates including miRNAs were identified as being deregulated in either pooled PCa or BPH with respect to the healthy control group. Candidate biomarkers were then assessed among individual samples to validate their utility in diagnosing PCa and/or differentiating PCa from BPH. A number of potential targets including deregulation of miRNAs 1825 and 484, and mRNAs for Fibronectin and Tumor Protein 53 Inducible Nuclear Protein 2 (TP53INP2) appeared to be indicative of PCa. Furthermore, deregulation of miR-498 appeared to be indicative of BPH. The sensitivities and specificities associated with using deregulation in many of these targets to subsequently predict PCa or BPH were also determined. This research project has identified a number of potential targets, detectable in urine, which merit further investigation towards the accurate identification of PCa and its discrimination from BPH. The significance of this work is amplified by the non-invasive nature of the sample source from which these candidates were derived, urine. Many cancer biomarker discovery studies have tended to focus primarily on blood (plasma or serum) and/or tissue samples. This is one of the first PCa biomarker studies to focus exclusively on urine as a sample source.