Rapid fusion and syncytium formation of heterologous cells upon expression of the FGFRL1 receptor

The fusion of mammalian cells into syncytia is a developmental process that is tightly restricted to a limited subset of cells. Besides gamete and placental trophoblast fusion, only macrophages and myogenic stem cells fuse into multinucleated syncytia. In contrast to viral cell fusion, which is mediated by fusogenic glycoproteins that actively merge membranes, mammalian cell fusion is poorly understood at the molecular level. A variety of mammalian transmembrane proteins, among them many of the immunoglobulin superfamily, have been implicated in cell-cell fusion, but none has been shown to actively fuse cells in vitro. Here we report that the FGFRL1 receptor, which is up-regulated during the differentiation of myoblasts into myotubes, fuses cultured cells into large, multinucleated syncytia. We used luciferase and GFP-based reporter assays to confirm cytoplasmic mixing and to identify the fusion inducing domain of FGFRL1. These assays revealed that Ig-like domain III and the transmembrane domain are both necessary and sufficient to rapidly fuse CHO cells into multinucleated syncytia comprising several hundred nuclei. Moreover, FGFRL1 also fused HEK293 and HeLa cells with untransfected CHO cells. Our data show that FGFRL1 is the first mammalian protein that is capable of inducing syncytium formation of heterologous cells in vitro.

A Simple Visual Demonstration of Phase Diagram Concepts for an Introductory Materials Science Course Using Colored Solvents

A simple and effective demonstration to help students comprehend phase diagrams and understand phase equilibria and transformations is created using common chemical solvents available in the laboratory. Common misconceptions surrounding phase diagram operations, such as components versus phases, reversibility of phase transformations, and the lever rule are addressed. Three different binary liquid mixtures of varying compatibility create contrastive phase equilibrium cases, where colorful dyes selectively dissolved in each of corresponding phases allow for quick and unambiguous perceptions of solubility limit and phase transformations. Direct feedback and test scores from a group of students show evidence of the effectiveness of the visual and active teaching tool.

Micropreparative isoelectric focusing protein separation in a suspended drop

IEF protein binary separations were performed in a 12-μL drop suspended between two palladium electrodes, using pH gradients created by electrolysis of simple buffers at low voltages (1.5-5 V). The dynamics of pH gradient formation and protein separation were investigated by computer simulation and experimentally via digital video microscope imaging in the presence and absence of pH indicator solution. Albumin, ferritin, myoglobin, and cytochrome c were used as model proteins. A drop containing 2.4 μg of each protein was applied, electrophoresed, and allowed to evaporate until it splits to produce two fractions that were recovered by rinsing the electrodes with a few microliters of buffer. Analysis by gel electrophoresis revealed that anode and cathode fractions were depleted from high pI and low pI proteins, respectively, whereas proteins with intermediate pI values were recovered in both fractions. Comparable data were obtained with diluted bovine serum that was fortified with myoglobin and cytochrome c.

Coping personality type and environmental enrichment affect aggression at weaning in pigs

This study investigated the effects of different environmental treatments and personality types on aggression at mixing of newly weaned domestic piglets. From birth to weaning, 16 litters were housed with their dams in either barren (B) or larger, substrate-enriched (E) environments. At 15 days old, piglets were classified as 'high' (HR) or low resistant' (LR) in a manual restraint test (backtest), which is thought to identify proactive (HR) and reactive (LR) stress coping strategies that may reflect different personality types. At 30 days old, 128 piglets were weaned, relocated and mixed into 32 pens comprising two HR and two LR unfamiliar pigs, balanced for sex and weaning weight. Eight B and eight E groups changed environmental condition whereas the others remained in the same type of environment. Number and duration of fights. fight outcomes and unilateral fighting were scored for 5 h post-mixing and skin lesions were counted before and 5 h, 1 day and 2 days after mixing. On the day following weaning, fighting and also exploratory and oral manipulative behaviours were measured for 6 h. Generalized Linear Mixed Model analyses suggested interactions between pre-weaning environment, post-weaning environment and personality type. Overall, pre-weaning E pigs had longer fights at weaning and mixing (P=0.01) and fought for longer on the next day (P=0.02) than pre-weaning B pigs, and inflicted more skin lesions (P=0.02). Post-weaning enrichment did not affect fighting at mixing but reduced the time spent fighting the next day (P=0.03). Personality had subtle and environment-dependent effects on fighting, and influenced the "structure" rather than the amount of aggressive behaviour. HR pigs, for instance, bullied (i.e. chased surrendering pigs) more often (P=0.009) and their fighting behaviour was less affected by their relative body weight than that of LR pigs. Post-weaning E pigs showed relatively higher levels of exploratory behaviour (P=0.02) and less oral manipulative behaviour (P=0.04) than post-weaning B pigs. In particular, switching from a good quality environment (E) to a worse quality one (B) at weaning decreased exploratory behaviour on the next day, especially for LR pigs, who also tended to fight with and orally manipulate their pen mates more in that condition, and seemed to be more affected by a deterioration of the environment. Overall, pre-weaning enrichment increased aggression after weaning whereas post-weaning enrichment reduced it, and personality type related to some aspects of fighting behaviour. (C) 2011 Elsevier B.V. All rights reserved.

Population-based design of mandibular fixation plates with bone quality and morphology considerations

In this paper we present a new population-based implant design methodology, which advances the state-of-the-art approaches by combining shape and bone quality information into the design strategy. The method may enhance the mechanical stability of the fixation and reduces the intra-operative in-plane bending which might impede the functionality of the locking mechanism. The computational method is presented for the case of mandibular locking fixation plates, where the mandibular angle and the bone quality at screw locations are taken into account. The method automatically derives the mandibular angle and the bone thickness and intensity values at the path of every screw from a set of computed tomography images. An optimization strategy is then used to optimize the two parameters of plate angle and screw position. The method was applied to two populations of different genders. Results for the new design are presented along with a comparison with a commercially available mandibular locking fixation plate (MODUS(®) TriLock(®) 2.0/2.3/2.5, Medartis AG, Basel, Switzerland). The proposed designs resulted in a statistically significant improvement in the available bone thickness when compared to the standard plate. There is a higher probability that the proposed implants cover areas of thicker cortical bone without compromising the bone mineral density around the screws. The obtained results allowed us to conclude that an angle and screw separation of 129° and 9 mm for females and 121° and 10 mm for males are more suitable designs than the commercially available 120° and 9 mm.

Effect Of Confined Impinging Jet Mixing Processing Parameters On Poly (Lactic Acid) Nanoparticle Morphology

Biodegradable nanoparticles are at the forefront of drug delivery research as they provide numerous advantages over traditional drug delivery methods. An important factor affecting the ability of nanoparticles to circulate within the blood stream and interact with cells is their morphology. In this study a novel processing method, confined impinging jet mixing, was used to form poly (lactic acid) nanoparticles through a solvent-diffusion process with Pluronic F-127 being used as a stabilizing agent. This study focused on the effects of Reynolds number (flow rate), surfactant presence in mixing, and polymer concentration on the morphology of poly (lactic acid) nanoparticles. In addition to looking at the parameters affecting poly (lactic acid) morphology, this study attempted to improve nanoparticle isolation and purification methods to increase nanoparticle yield and ensure specific morphologies were not being excluded during isolation and purification. The isolation and purification methods used in this study were centrifugation and a stir cell. This study successfully produced particles having pyramidal and cubic morphologies. Despite successful production of these morphologies the yield of non-spherical particles was very low, additionally great variability existed between redundant trails. Surfactant was determined to be very important for the stabilization of nanoparticles in solution but appears to be unnecessary for the formation of nanoparticles. Isolation and purification methods that produce a high yield of surfactant free particles have still not been perfected and additional testing will be necessary for improvement.¿

The Constitutional-Judicial Control of the Legislative and Executive Powers in Central and Eastern European Countries

This project looked at the nature, contents, methods, means and legal and political effects of the influence that constitutional courts exercise upon the legislative and executive powers in the newly established democracies of Central and Eastern Europe. The basic hypothesis was that these courts work to provide a limitation of political power within the framework of the principal constitutional values and that they force the legislature and executive to exercise their powers and duties in strict accordance with the constitution. Following a study of the documentary sources, including primarily the relevant constitutional and statutory provisions and decisions of constitutional courts, Mr. Cvetkovski prepared a questionnaire on various aspects of the topics researched and sent it to the respective constitutional courts. A series of direct interviews with court officials in six of the ten countries then served to clarify a large number of questions relating to differences in procedures etc. that arose from the questionnaires. As a final stage, the findings were compared with those described in recent publications on constitutional control in general and in Central and Eastern Europe in particular. The study began by considering the constitutional and political environment of the constitutional courts' activities in controlling legislative and executive powers, which in all countries studied are based on the principles of the rule of law and the separation of powers. All courts are separate bodies with special status in terms of constitutional law and are independent of other political and judicial institutions. The range of matters within their jurisdiction is set by the constitution of the country in question but in all cases can be exercised only with the framework of procedural rules. This gives considerable significance to the question of who sets these rules and different countries have dealt with it in different ways. In some there is a special constitutional law with the same legal force as the constitution itself (Croatia), the majority of countries allow for regulation by an ordinary law, Macedonia gives the court the autonomy to create and change its own rules of procedure, while in Hungary the parliament fixes the rules on procedure at the suggestion of the constitutional court. The question of the appointment of constitutional judges was also considered and of the mechanisms for ensuring their impartiality and immunity. In the area of the courts' scope for providing normative control, considerable differences were found between the different countries. In some cases the courts' jurisdiction is limited to the normative acts of the respective parliaments, and there is generally no provision for challenging unconstitutional omissions by legislation and the executive. There are, however, some situations in which they may indirectly evaluate the constitutionality of legislative omissions, as when the constitution contains provision for a time limit on enacting legislation, when the parliament has made an omission in drafting a law which violates the constitutional provisions, or when a law grants favours to certain groups while excluding others, thereby violating the equal protection clause of the constitution. The control of constitutionality of normative acts can be either preventive or repressive, depending on whether it is implemented before or after the promulgation of the law or other enactment being challenged. In most countries in the region the constitutional courts provide only repressive control, although in Hungary and Poland the courts are competent to perform both preventive and repressive norm control, while in Romania the court's jurisdiction is limited to preventive norm control. Most countries are wary of vesting constitutional courts with preventive norm control because of the danger of their becoming too involved in the day-to-day political debate, but Mr. Cvetkovski points out certain advantages of such control. If combined with a short time limit it can provide early clarification of a constitutional issue, secondly it avoids the problems arising if a law that has been in force for some years is declared to be unconstitutional, and thirdly it may help preserve the prestige of the legislation. Its disadvantages include the difficulty of ascertaining the actual and potential consequences of a norm without the empirical experience of the administration and enforcement of the law, the desirability of a certain distance from the day-to-day arguments surrounding the political process of legislation, the possible effects of changing social and economic conditions, and the danger of placing obstacles in the way of rapid reactions to acute situations. In the case of repressive norm control, this can be either abstract or concrete. The former is initiated by the supreme state organs in order to protect abstract constitutional order and the latter is initiated by ordinary courts, administrative authorities or by individuals. Constitutional courts cannot directly oblige the legislature and executive to pass a new law and this remains a matter of legislative and executive political responsibility. In the case of Poland, the parliament even has the power to dismiss a constitutional court decision by a special majority of votes, which means that the last word lies with the legislature. As the current constitutions of Central and Eastern European countries are newly adopted and differ significantly from the previous ones, the courts' interpretative functions should ensure a degree of unification in the application of the constitution. Some countries (Bulgaria, Hungary, Poland, Slovakia and Russia) provide for the constitutional courts' decisions to have a binding role on the constitutions. While their decisions inevitably have an influence on the actions of public bodies, they do not set criteria for political behaviour, which depends rather on the overall political culture and traditions of the society. All constitutions except that of Belarus, provide for the courts to have jurisdiction over conflicts arising from the distribution of responsibilities between different organs and levels in the country, as well for impeachment procedures against the head of state, and for determining the constitutionality of political parties (except in Belarus, Hungary, Russia and Slovakia). All the constitutions studied guarantee individual rights and freedoms and most courts have jurisdiction over complaints of violation of these rights by the constitution. All courts also have some jurisdiction over international agreements and treaties, either directly (Belarus, Bulgaria and Hungary) before the treaty is ratified, or indirectly (Croatia, Czech Republic, Macedonia, Romania, Russia and Yugoslavia). In each country the question of who may initiate proceedings of norm control is of central importance and is usually regulated by the constitution itself. There are three main possibilities: statutory organs, normal courts and private individuals and the limitations on each of these is discussed in the report. Most courts are limited in their rights to institute ex officio a full-scale review of a point of law, and such rights as they do have rarely been used. In most countries courts' decisions do not have any binding force but must be approved by parliament or impose on parliament the obligation to bring the relevant law into conformity within a certain period. As a result, the courts' position is generally weaker than in other countries in Europe, with parliament remaining the supreme body. In the case of preventive norm control a finding of unconstitutionality may act to suspend the law and or to refer it back to the legislature, where in countries such as Romania it may even be overturned by a two-thirds majority. In repressive norm control a finding of unconstitutionality generally serves to take the relevant law out of legal force from the day of publication of the decision or from another date fixed by the court. If the law is annulled retrospectively this may or may not bring decisions of criminal courts under review, depending on the provisions laid down in the relevant constitution. In cases relating to conflicts of competencies the courts' decisions tend to be declaratory and so have a binding effect inter partes. In the case of a review of an individual act, decisions generally become effective primarily inter partes but is the individual act has been based on an unconstitutional generally binding normative act of the legislature or executive, the findings has quasi-legal effect as it automatically initiates special proceedings in which the law or other regulation is to be annulled or abrogated with effect erga omnes. This wards off further application of the law and thus further violations of individual constitutional rights, but also discourages further constitutional complaints against the same law. Thus the success of one individual's complaint extends to everyone else whose rights have equally been or might have been violated by the respective law. As the body whose act is repealed is obliged to adopt another act and in doing so is bound by the legal position of the constitutional court on the violation of constitutionally guaranteed freedoms and rights of the complainant, in this situation the decision of the constitutional court has the force of a precedent.

Capillary electrophoresis contributions to the hydromorphone metabolism in man

CE-ESI multistage IT-MS (CE-MS(n), n < or = 4) and computer simulation of fragmentation are demonstrated to be effective tools to detect and identify phase I and phase II metabolites of hydromorphone (HMOR) in human urine. Using the same CE conditions as previously developed for the analysis of urinary oxycodone and its metabolites, HMOR and its phase I metabolites produced by N-demethylation, 6-keto-reduction and N-oxidation and phase II conjugates of HMOR and its metabolites formed with glucuronic acid, glucose, and sulfuric acid could be detected in urine samples of a patient that were collected during a pharmacotherapy episode with daily ingestion of 48 mg of HMOR chloride. The CE-MS(n) data obtained with the HMOR standard, synthesized hydromorphol and hydromorphone-N-oxide, and CYP3A4 in vitro produced norhydromorphone were employed to identify the metabolites. This approach led to the identification of previously unknown HMOR metabolites, including HMOR-3O-glucide and various N-oxides, structures for which no standard compounds or mass spectra library data were available. Furthermore, the separation of alpha- and beta-hydromorphol, the stereoisomers of 6-keto-reduced HMOR, was achieved by CE in the presence of the single isomer heptakis(2,3-diacetyl-6-sulfato)-beta-CD. The obtained data indicate that the urinary excretion of alpha-hydromorphol is larger than that of beta-hydromorphol.

Prediction of whole-genome DNA-DNA similarity, determination of G+C content and phylogenetic analysis within the family Pasteurellaceae by multilocus sequence analysis (MLSA)

Genome predictions based on selected genes would be a very welcome approach for taxonomic studies, including DNA-DNA similarity, G+C content and representative phylogeny of bacteria. At present, DNA-DNA hybridizations are still considered the gold standard in species descriptions. However, this method is time-consuming and troublesome, and datasets can vary significantly between experiments as well as between laboratories. For the same reasons, full matrix hybridizations are rarely performed, weakening the significance of the results obtained. The authors established a universal sequencing approach for the three genes recN, rpoA and thdF for the Pasteurellaceae, and determined if the sequences could be used for predicting DNA-DNA relatedness within the family. The sequence-based similarity values calculated using a previously published formula proved most useful for species and genus separation, indicating that this method provides better resolution and no experimental variation compared to hybridization. By this method, cross-comparisons within the family over species and genus borders easily become possible. The three genes also serve as an indicator of the genome G+C content of a species. A mean divergence of around 1 % was observed from the classical method, which in itself has poor reproducibility. Finally, the three genes can be used alone or in combination with already-established 16S rRNA, rpoB and infB gene-sequencing strategies in a multisequence-based phylogeny for the family Pasteurellaceae. It is proposed to use the three sequences as a taxonomic tool, replacing DNA-DNA hybridization.

Proposed minimal standards for the description of genera, species and subspecies of the Pasteurellaceae

Principles and guidelines are presented to ensure a solid scientific standard of papers dealing with the taxonomy of taxa of Pasteurellaceae Pohl 1981. The classification of the Pasteurellaceae is in principle based on a polyphasic approach. DNA sequencing of certain genes is very important for defining the borders of a taxon. However, the characteristics that are common to all members of the taxon and which might be helpful for separating it from related taxa must also be identified. Descriptions have to be based on as many strains as possible (inclusion of at least five strains is highly desirable), representing different sources with respect to geography and ecology, to allow proper characterization both phenotypically and genotypically, to establish the extent of diversity of the cluster to be named. A genus must be monophyletic based on 16S rRNA gene sequence-based phylogenetic analysis. Only in very rare cases is it acceptable that monophyly can not be achieved by 16S rRNA gene sequence comparison. Recently, the monophyly of genera has been confirmed by sequence comparison of housekeeping genes. In principle, a new genus should be recognized by a distinct phenotype, and characters that separate the new genus from its neighbours should be given clearly. Due to the overall importance of accurate classification of species, at least two genotypic methods are needed to show coherence and for separation at the species level. The main criterion for the classification of a novel species is that it forms a monophyletic group based on 16S rRNA gene sequence-based phylogenetic analysis. However, some groups might also include closely related species. In these cases, more sensitive tools for genetic recognition of species should be applied, such as DNA-DNA hybridizations. The comparison of housekeeping gene sequences has recently been used for genotypic definition of species. In order to separate species, phenotypic characters must also be identified to recognize them, and at least two phenotypic differences from existing species should be identified if possible. We recommend the use of the subspecies category only for subgroups associated with disease or similar biological characteristics. At the subspecies level, the genotypic groups must always be nested within the boundaries of an existing species. Phenotypic cohesion must be documented at the subspecies level and separation between subspecies and related species must be fully documented, as well as association with particular disease and host. An overview of methods previously used to characterize isolates of the Pasteurellaceae has been given. Genotypic and phenotypic methods are separated in relation to tests for investigating diversity and cohesion and to separate taxa at the level of genus as well as species and subspecies.

Evidence and structural mechanism for late lung alveolarization

According to the current view, the formation of new alveolar septa from preexisting ones ceases due to the reduction of a double- to a single-layered capillaries network inside the alveolar septa (microvasculature maturation postnatal days 14-21 in rats). We challenged this view by measuring stereologically the appearance of new alveolar septa and by studying the alveolar capillary network in three-dimensional (3-D) visualizations obtained by high-resolution synchrotron radiation X-ray tomographic microscopy. We observed that new septa are formed at least until young adulthood (rats, days 4-60) and that roughly half of the new septa are lifted off of mature septa containing single-layered capillary networks. At the basis of newly forming septa, we detected a local duplication of the capillary network. We conclude that new alveoli may be formed in principle at any time and at any location inside the lung parenchyma and that lung development continues into young adulthood. We define two phases during developmental alveolarization. Phase one (days 4-21), lifting off of new septa from immature preexisting septa, and phase two (day 14 through young adulthood), formation of septa from mature preexisting septa. Clinically, our results ask for precautions using drugs influencing structural lung development during both phases of alveolarization.

Simulating dioxane transport in a heterogeneous glacial aquifer system (Washtenaw County, Michigan) using publicly available models and data

The primary challenge in groundwater and contaminant transport modeling is obtaining the data needed for constructing, calibrating and testing the models. Large amounts of data are necessary for describing the hydrostratigraphy in areas with complex geology. Increasingly states are making spatial data available that can be used for input to groundwater flow models. The appropriateness of this data for large-scale flow systems has not been tested. This study focuses on modeling a plume of 1,4-dioxane in a heterogeneous aquifer system in Scio Township, Washtenaw County, Michigan. The analysis consisted of: (1) characterization of hydrogeology of the area and construction of a conceptual model based on publicly available spatial data, (2) development and calibration of a regional flow model for the site, (3) conversion of the regional model to a more highly resolved local model, (4) simulation of the dioxane plume, and (5) evaluation of the model's ability to simulate field data and estimation of the possible dioxane sources and subsequent migration until maximum concentrations are at or below the Michigan Department of Environmental Quality's residential cleanup standard for groundwater (85 ppb). MODFLOW-2000 and MT3D programs were utilized to simulate the groundwater flow and the development and movement of the 1, 4-dioxane plume, respectively. MODFLOW simulates transient groundwater flow in a quasi-3-dimensional sense, subject to a variety of boundary conditions that can simulate recharge, pumping, and surface-/groundwater interactions. MT3D simulates solute advection with groundwater flow (using the flow solution from MODFLOW), dispersion, source/sink mixing, and chemical reaction of contaminants. This modeling approach was successful at simulating the groundwater flows by calibrating recharge and hydraulic conductivities. The plume transport was adequately simulated using literature dispersivity and sorption coefficients, although the plume geometries were not well constrained.

Synthesis of PDMS-metal oxide hybrid nanocomposites using an in situ sol-gel route

Organic-inorganic hybrid nanocomposites are widely studied and applied in broad areas because of their ability to combine the flexibility, low density of the organic materials with the hardness, strength, thermal stability, good optical and electronic properties of the inorganic materials. Polydimethylsiloxane (PDMS) due to its excellent elasticity, transparency, and biocompatibility has been extensively employed as the organic host matrix for nanocomposites. For the inorganic component, titanium dioxide and barium titanate are broadly explored as they possess outstanding physical, optical and electronic properties. In our experiment, PDMS-TiO2 and PDMS-BaTiO3 hybrid nanocomposites were fabricated based on in-situ sol-gel technique. By changing the amount of metal precursors, transparent and homogeneous PDMS-TiO2 and PDMS-BaTiO3 hybrid films with various compositions were obtained. Two structural models of these two types of hybrids were stated and verified by the results of characterization. The structures of the hybrid films were examined by a conjunction of FTIR and FTRaman. The morphologies of the cross-sectional areas of the films were characterized by FESEM. An Ellipsometer and an automatic capacitance meter were utilized to evaluate the refractive index and dielectric constant of these composites respectively. A simultaneous DSC/TGA instrument was applied to measure the thermal properties. For PDMS-TiO2 hybrids, the higher the ratio of titanium precursor added, the higher the refractive index and the dielectric constant of the composites are. The highest values achieved of refractive index and dielectric constant were 1.74 and 15.5 respectively for sample PDMS-TiO2 (1-6). However, when the ratio of titanium precursor to PDMS was as high as 20 to 1, phase separation occurred as evidenced by SEM images, refractive index and dielectric constant decreased. For PDMS-BaTiO3 hybrids, with the increase of barium and titanium precursors in the system, the refractive index and dielectric constant of the composites increased. The highest value was attained in sample PDMS-BaTiO3 (1-6) with a refractive index of 1.6 and a dielectric constant of 12.2. However, phase separation appeared in SEM images for sample PDMS-BaTiO3 (1-8), the refractive index and dielectric constant reduced to lower values. Different compositions of PDMS-TiO2 and PDMS-BaTiO3 hybrid films were annealed at 60 °C and 100 °C, the influences on the refractive index, dielectric constant, and thermal properties were investigated.

Negative index metamaterials and metaspacers for optical frequencies

Metamaterials are artificial materials that exhibit properties, such as negative index of refraction, that are not possible through natural materials. Due to many potential applications of negative index metamaterials, significant progress in the field has been observed in the last decade. However, achieving negative index at visible frequencies is a challenging task. Generally, fishnet metamaterials are considered as a possible route to achieve negative index in the visible spectrum. However, so far no metamaterial has been demonstrated to exhibit simultaneously negative permittivity and permeability (double-negative) beyond the red region of the visible spectrum. This study is mainly focused on achieving higher operating frequency for low-loss, double-negative metamaterials. Two double-negative metamaterials have been proposed to operate at highest reported frequencies. The first proposed metamaterial is based on the interaction of surface plasmon polaritons of a thin metal film with localized surface plasmons of a metallic array placed close to the thin film. It is demonstrated that the metamaterial can easily be scaled to operate at any frequency in the visible spectrum as well as possibly to the ultraviolet spectrum. Furthermore, the underlying physical phenomena and possible future extensions of the metamaterial are also investigated. The second proposed metamaterial is a modification to the so-called fishnet metamaterial. It has been demonstrated that this ‘modified fishnet’ exhibits two double-negative bands in the visible spectrum with highest operating frequency in the green region with considerably high figure of merit. In contrast to most of the fishnet metamaterials proposed in the past, behavior of this modified fishnet is independent of polarization of the incident field. In addition to the two negative index metamaterials proposed in this study, the use of metamaterial as a spacer, named as metaspacer, is also investigated. In contrast to naturally available dielectric spacers used in microfabrication, metaspacers can be realized with any (positive or negative) permittivity and permeability. As an example, the use of a negative index metaspacer in place of the dielectric layer in a fishnet metamaterial is investigated. It is shown that fishnet based on negative index metaspacer gives many improved optical properties over the conventional fishnet such as wider negative index band, higher figure of merit, higher optical transmission and stronger magnetic response. In addition to the improved properties, following interesting features were observed in the metaspacer based fishnet metamaterial. At the resonance frequency, the shape of the permeability curve was ‘inverted’ as compared to that for conventional fishnet metamaterial. Furthermore, dependence of the resonance frequency on the fishnet geometry was also reversed. Moreover, simultaneously negative group and phase velocities were observed in the low-loss region of the metaspacer based fishnet metamaterial. Due to interesting features observed using metaspacer, this study will open a new horizon for the metamaterial research.

TIME LAPSE SEISMIC OBSERVATIONS AND EFFECTS OF RESERVOIR COMPRESSIBILITY AT TEAL SOUTH OIL FIELD

One of the original ocean-bottom time-lapse seismic studies was performed at the Teal South oil field in the Gulf of Mexico during the late 1990’s. This work reexamines some aspects of previous work using modern analysis techniques to provide improved quantitative interpretations. Using three-dimensional volume visualization of legacy data and the two phases of post-production time-lapse data, I provide additional insight into the fluid migration pathways and the pressure communication between different reservoirs, separated by faults. This work supports a conclusion from previous studies that production from one reservoir caused regional pressure decline that in turn resulted in liberation of gas from multiple surrounding unproduced reservoirs. I also provide an explanation for unusual time-lapse changes in amplitude-versus-offset (AVO) data related to the compaction of the producing reservoir which, in turn, changed an isotropic medium to an anisotropic medium. In the first part of this work, I examine regional changes in seismic response due to the production of oil and gas from one reservoir. The previous studies primarily used two post-production ocean-bottom surveys (Phase I and Phase II), and not the legacy streamer data, due to the unavailability of legacy prestack data and very different acquisition parameters. In order to incorporate the legacy data in the present study, all three poststack data sets were cross-equalized and examined using instantaneous amplitude and energy volumes. This approach appears quite effective and helps to suppress changes unrelated to production while emphasizing those large-amplitude changes that are related to production in this noisy (by current standards) suite of data. I examine the multiple data sets first by using the instantaneous amplitude and energy attributes, and then also examine specific apparent time-lapse changes through direct comparisons of seismic traces. In so doing, I identify time-delays that, when corrected for, indicate water encroachment at the base of the producing reservoir. I also identify specific sites of leakage from various unproduced reservoirs, the result of regional pressure blowdown as explained in previous studies; those earlier studies, however, were unable to identify direct evidence of fluid movement. Of particular interest is the identification of one site where oil apparently leaked from one reservoir into a “new” reservoir that did not originally contain oil, but was ideally suited as a trap for fluids leaking from the neighboring spill-point. With continued pressure drop, oil in the new reservoir increased as more oil entered into the reservoir and expanded, liberating gas from solution. Because of the limited volume available for oil and gas in that temporary trap, oil and gas also escaped from it into the surrounding formation. I also note that some of the reservoirs demonstrate time-lapse changes only in the “gas cap” and not in the oil zone, even though gas must be coming out of solution everywhere in the reservoir. This is explained by interplay between pore-fluid modulus reduction by gas saturation decrease and dry-frame modulus increase by frame stiffening. In the second part of this work, I examine various rock-physics models in an attempt to quantitatively account for frame-stiffening that results from reduced pore-fluid pressure in the producing reservoir, searching for a model that would predict the unusual AVO features observed in the time-lapse prestack and stacked data at Teal South. While several rock-physics models are successful at predicting the time-lapse response for initial production, most fail to match the observations for continued production between Phase I and Phase II. Because the reservoir was initially overpressured and unconsolidated, reservoir compaction was likely significant, and is probably accomplished largely by uniaxial strain in the vertical direction; this implies that an anisotropic model may be required. Using Walton’s model for anisotropic unconsolidated sand, I successfully model the time-lapse changes for all phases of production. This observation may be of interest for application to other unconsolidated overpressured reservoirs under production.