Extraction of added-value products from biomass using ionic liquids

The main purpose of this thesis is to investigate the potential of ionic liquids (ILs) as a new class of extractive solvents for added-value products from biomass. These include phenolic compounds (vanillin, gallic, syringic and vanillic acids), alkaloids (caffeine) and aminoacids (L-tryptophan). The interest on these natural compounds relies on the wide variety of relevant properties shown by those families and further application in the food, cosmetic and pharmaceutical industries. Aiming at developping more benign and effective extraction/purification techniques than those used, a comprehensive study was conducted using aqueous biphasic systems (ABS) composed of ILs and inorganic/organic salts. In addition, ILs were characterized by a polarity scale, using solvatochromic probes, aiming at providing prior indications on the ILs affinity for particular added-value products. Solid-liquid (S-L) extractions from biomass and using aqueous solution of ILs were also investigated. In particular, and applying and experimental factorial design to optimize the operational conditions, caffeine was extracted from guaraná seeds and spent coffee. With both types of extractions it was found that it is possible to recover the high-value compounds and to recycle the IL and salt solutions. Finally, aiming at exploring the recovery of added-value compounds from biomass using a simpler and more suistainable technique, the solubility of gallic acid, vanillin and caffeine was studied in aqueous solutions of several ILs and common salts. With the gathered results it was possible to demonstrate that ILs act as hydrotropes and that water can be used as an adequate antisolvent. This thesis describes the use of ILs towards the development of more effective and sustainable processes.

Estudos de síntese e transformação de cromonas e 4-quinolonas

Esta dissertação está dividida em duas partes. Na primeira parte reportam-se métodos de síntese de (E)-3-estirilflavonas e (E)/(Z)-2-aril- 4-cloro-3-estiril-2H-cromenos e estudos de ciclização das (E)-3- estirilflavonas em 5-arilbenzo[c]xantonas. Na segunda parte desenvolveram-se novas rotas de síntese de (E)-2-aril-3-estiril-4- quinolonas e posterior transformação em 5-fenil-12- metilbenzo[c]acridonas e 2,4-diarilfuro[3,2-c]quinolinas. Nesta parte estudou-se também a transformação de 2-aril-4-cloro-1,2-dihidroquinolina- 1,3-dicarbaldeídos em (E)/(Z)-2-aril-4-cloro-3-estiril-1,2- di-hidroquinolina-1-carbaldeídos. A síntese de novos derivados de (E)-3-estirilflavonas, abordada na primeira parte desta dissertação, envolveu estudos de otimização da reação de bromação seguida de ciclização de 3-aril-1-(2- hidroxiaril)propano-1,3-dionas/3-aril-3-hidroxi-1-(2-hidroxiaril)prop-2- en-1-onas em 3-bromoflavonas e o desenvolvimento de uma nova rota de síntese de 3-metilflavonas. As 3-metilflavonas foram sujeitas a bromação e seguidamente transformadas em sais de fosfónio antes de serem utilizadas na síntese de (E)-3-estirilflavonas via reação de Wittig. As 3-bromoflavonas foram também usadas na síntese de (E)-3- estirilflavonas via reação de Heck. A síntese de novos derivados de (E)/(Z)-2-aril-4-cloro-3-estiril-2H-cromenos, via reação de Wittig, envolveu a síntese e formilação de flavanonas. A última transformação reportada na primeira parte desta dissertação é a síntese de 5-arilbenzo[c]xantonas por reação de eletrociclização seguida de oxidação de (E)-3-estirilflavonas. Na segunda parte desta dissertação são estudadas duas vias de síntese de 2-aril-1-metil-4-quinolonas. A primeira via de síntese envolve a síntese de N-(2-acetilfenil)benzamidas, sua ciclização em 4-quinolonas seguida de metilação destas. A segunda via envolve a metilação e ciclização de N-(2-acetilfenil)benzamidas obtendo-se, num só passo, as 2-aril-1-metil-4-quinolonas. Posterior iodação das 2-aril-1-metil-4- quinolonas e subsequente reação de Heck das 2-aril-3-iodo-1-metil-4- quinolonas com estirenos comerciais possibilitaram a síntese de (E)-2- aril-3-estiril-1-metil-4-quinolonas. Estudos de eletrociclização seguidos de oxidação das (E)-2-aril-3-estiril-1-metil-4-quinolonas utilizando uma lâmpada de UV de mercúrio de alta pressão possibilitou a síntese de 5- fenil-12-metilbenzo[c]acridonas, enquanto que o aquecimento em refluxo de 1,2,4-triclorobenzeno deu origem a 2,4-diarilfuro[3,2- c]quinolinas. Nesta segunda parte aborda-se também a síntese de 2-aril-4-cloro-1,2- di-hidroquinolina-1,3-dicarbaldeídos, a partir da formilação de 2-aril- 2,3-di-hidro-4-quinolonas e a sua transformação em (E)/(Z)-2-aril-4- cloro-3-estiril-1,2-di-hidroquinolina-1-carbaldeídos por reação de Wittig. Todos os compostos sintetizados foram caracterizados por espectroscopia de ressonância magnética nuclear de protão e carbono 13C, espectros bidimensionais de correlação heteronuclear (HMBC e HSQC) e, nalguns casos espectros de efeito nuclear Overhauser (NOESY). Os novos produtos foram igualmente caracterizados por espectrometria de massa e sempre que possível análise elementar ou espectrometria de massa de alta resolução.

Development of a sustainable method for the extraction of lycopene and β-carotene from food wastes

The main objective of the present work is the study of a profitable process not only in the extraction and selective separation of lycopene and β-carotene, two compounds present in tomato, but also in its potential application to food industry wastes. This is one of the industries that produce larger amounts of wastes, which are rich in high value biomolecules with great economic interest. However, the conventional methods used to extract this kind of compounds are expensive which limits their application at large scale. Lycopene and βcarotene are carotenoids with high commercial value, known for their antioxidant activity and benefits to human health. Their biggest source is tomato, one of the world’s most consumed fruits, reason for which large quantities of waste is produced. This work focuses on the study of diverse solvents with a high potential to extract carotenoids from tomato, as well as the search for more environmentally benign solvents than those currently used to extract lycopene and β-carotene from biomass. Additionally, special attention was paid to the creation of a continuous process that would allow the fractionation of the compounds for further purification. Thus, the present work started with the extraction of both carotenoids using a wide range of solvents, namely, organic solvents, conventional salts, ionic liquids, polymers and surfactants. In this stage, each solvent was evaluated in what regards their capacity of extraction as well as their penetration ability in biomass. The results collected showed that an adequate selection of the solvents may lead to the complete extraction of both carotenoids in one single step, particularly acetone and tetrahydrofuran were the most effective ones. However, the general low penetration capacity of salts, ionic liquids, polymers and surfactants makes these solvents ineffective in the solid-liquid extraction process. As the organic solvents showed the highest capacity to extract lycopene and βcarotene, in particular tetrahydrofuran and acetone, the latter solvent used in the development process of fractionation, using to this by strategic use of solvents. This step was only successfully developed through the manipulation of the solubility of each compound in ethanol and n-hexane. The results confirmed the possibility of fractionating the target compounds using the correct addition order of the solvents. Approximately, 39 % of the β-carotene was dissolved in ethanol and about 64 % of lycopene was dissolved in n-hexane, thus indicating their separation for two different solvents which shows the selective character of the developed process without any prior stage optimization. This study revealed that the use of organic solvents leads to selective extraction of lycopene and β-carotene, allowing diminishing the numerous stages involved in conventional methods. At the end, it was possible to idealize a sustainable and of high industrial relevance integrated process, nevertheless existing the need for additional optimization studies in the future.

The response of reworked aerosols to climate through estimation of inter-particle forces

This paper describes the first use of inter-particle force measurement in reworked aerosols to better understand the mechanics of dust deflation and its consequent ecological ramifications. Dust is likely to carry hydrocarbons and micro-organisms including human pathogens and cultured microbes and thereby is a threat to plants, animals and human. Present-day global aerosol emissions are substantially greater than in 1850; however, the projected influx rates are highly disputable. This uncertainty, in part, has roots in the lack of understanding of deflation mechanisms. A growing body of literature shows that whether carbon emission continues to increase, plant transpiration drops and soil water retention enhances, allowing more greenery to grow and less dust to flux. On the other hand, a small but important body of geochemistry literature shows that increasing emission and global temperature leads to extreme climates, decalcification of surface soils containing soluble carbonate polymorphs and hence a greater chance of deflation. The consistency of loosely packed reworked silt provides background data against which the resistance of dust’s bonding components (carbonates and water) can be compared. The use of macro-scale phenomenological approaches to measure dust consistency is trivial. Instead, consistency can be measured in terms of inter-particle stress state. This paper describes a semi-empirical parametrisation of the inter-particle cohesion forces in terms of the balance of contact-level forces at the instant of particle motion. We put forward the hypothesis that the loss of Ca2+-based pedogenic salts is responsible for much of the dust influx and surficial drying pays a less significant role.

Salt removing species

Dissertação de Mestrado, Gestão da Água e da Costa, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2007

Disrupção da glândula tiróide por composto goitrógeno (PTU)

Dissertação de Mestrado, Biologia Marinha, Faculdade Ciências do Mar e do Ambiente, Universidade do Algarve, 2008

Incorporation of selenium on microalgae as supplement to artemia and zebrafish

Dissertação de mestrado, Aquacultura, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Organic addittives in zinc electrowinning and electrodeposition of Fe-Mo-P alloys as cathodes for chlorate production

Ce projet de travail est divisé en deux études principales: (a) l’influence des certains additifs organiques sur la consommation d’énergie et la pureté du métal de zinc déposé dans le processus d’extraction électrolytique, et (b) l’électrodéposition des alliages binaires et ternaires de Fe-Mo et Fe-Mo-P sur des substrats d’acier doux afin d’agir comme cathodes pour la production de chlorate. (a) Parmi les sept différents additifs organiques examinés, les sels des liquides ioniques ont réussi à augmenter le rendement du courant jusqu’à 95,1% comparé à 88,7% qui a obtenu à partir de l’électrolyte standard en présence des ions de Sb3+. La réduction maximale de la consommation d’énergie de ~173 kWh tonne-1 a été obtenue en ajoutant de 3 mg dm-3 du chlorure de 1-butyl-3-méthylimidazolium dans le même électrolyte. La teneur en plomb dans le dépôt de zinc est réduite de 26,5 ppm à 5,1-5,6 ppm en utilisant les sels des liquides ioniques. (b) Des différents binaires Fe-Mo et ternaires Fe-Mo-P alliages ont été électrodéposés sur des substrats d’acier doux. Les alliages préparés ont une tenure en Mo entre 21-47 at.% et une tenure en P de 0 à 16 at.%. L’activité électrocatalytique de ces alliages vers la réaction de dégagement d’hydrogène (RDH) a été étudiée dans des solutions de chlorure de sodium. La réduction maximale de la surtension de RDH de ~313 mV a été obtenue par l’alliage ternaire préparé Fe54Mo30P16 par rapport à celle obtenue pour l’acier doux. La rugosité de surface et l’activité intrinsèque des revêtements de Fe-Mo-P peuvent être l’origine du comportement prometteur de ces électrocatalyseurs vers la RDH.

Développement d’une matrice prébiotique pour l’encapsulation des probiotiques bactériocinogènes, destinée à l’alimentation animale - de la physicochimie à la biopharmacie

L’antibiorésistance est un problème de santé publique majeur, causé principalement par l’usage abusif d’antibiotiques dans les élevages. Les probiotiques sont une alternative potentielle aux antibiotiques. Cependant, acheminer ces microorganismes vivants et fonctionnels jusqu’au côlon est un grand défi, à cause du pH et des sels biliaires à affronter lors du passage gastro-intestinal. L’objectif de ce travail était de développer une matrice prébiotique capable de maintenir la survie et l’activité des probiotiques pendant le transit gastro-intestinal et de permettre leur libération dans le côlon. Pour atteindre cet objectif, cinq types de matrices sphériques (A, AI5, AI10, AI15, AI20) à base d’inuline (0 %, 5 %, 10 %, 15 % et 20 %) et d’alginate (2 %) ont été préparés par la méthode d’extrusion/gélification ionotropique. Trois souches probiotiques ont été utilisées au cours du développement des billes : Pediococcus acidilactici UL5 (UL5), Lactobacillus reuteri (LR) et Lactobacillus salivarius (LS). Dans un premier temps, toutes les formulations ont été caractérisées d’un point de vue physicochimique et microbiologique. Ces analyses ont permis de révéler une distribution homogène de l’inuline et de l’alginate au sein des matrices et ont démontré que la viabilité et la capacité antimicrobienne des souches utilisées n’étaient pas affectées par l’encapsulation. À la lumière de ces résultats, trois formulations A, AI5 et AI20 ont été sélectionnées pour la suite de l’étude. Dans un deuxième temps, la mucoadhésion et le comportement des billes A, AI5 et AI20 ont été étudiés dans les parties supérieures du tractus gastro-intestinal. Ces études ont démontré que la présence de l’inuline améliore les propriétés mucoadhésives des billes. Elles ont également établi que seule la formulation AI5 résiste jusqu’à la fin de la digestion. Ce comportement est expliqué en partie par l’interaction alginate-inuline décelée par spectroscopie infrarouge à transformée de Fourier (FTIR). Cette interaction était stable pour les billes AI5 au pH 6,8 mais instable pour la formulation AI20. Enfin, le comportement et la dynamique bactérienne de la formulation AI5 dans les milieux coliques fermenté et non fermenté ont été étudiés. Cette étude a révélé que les billes AI5 se dégradent et libèrent la totalité des bactéries après environ 4 heures d’incubation dans le milieu fermenté. Cette dégradation est due aux enzymes très abondantes dans ce milieu. En conclusion, la formulation AI5 s’est avérée être un très bon véhicule pour protéger les bactéries dans les parties supérieures du tube digestif et favoriser leur libération dans le côlon. Elle pourrait donc, être utilisée pour une application en alimentation animale.

Evaluation of solubility and partition properties of ampicillin-based ionic liquids

In order to overcome the problems associated with low water solubility, and consequently low bioavailability of active pharmaceutical ingredients (APIs), herein we explore a modular ionic liquid synthetic strategy for improved APIs. Ionic liquids containing l-ampicillin as active pharmaceutical ingredient anion were prepared using the methodology developed in our previous work, using organic cations selected from substituted ammonium, phosphonium, pyridinium and methylimidazolium salts, with the intent of enhancing the solubility and bioavailability of l-ampicillin forms. In order to evaluate important properties of the synthesized API-ILs, the water solubility at 25 °C and 37 °C (body temperature) as well as octanol–water partition coefficients (Kow's) and HDPC micelles partition at 25 °C were measured. Critical micelle concentrations (CMC's) in water at 25 °C and 37 °C of the pharmaceutical ionic liquids bearing cations with surfactant properties were also determined from ionic conductivity measurements.

Incorporação de resíduos cerâmicos em argamassas de cal aérea sujeitas a condições severas de humidade e salinidade

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Métodos "verdes" de produção de nanomateriais que promovem nanotecnologias sustentáveis

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química

Bioatividade de Líquidos Iónicos derivados do Ácido Valpróico em bactérias Gram-negativa

Os Líquidos Iónicos (LIs) são sais orgânicos constituídos exclusivamente por iões e possuem pontos de fusão inferiores a 100ºC. As suas propriedades únicas e o facto de ser possível ajustar as suas propriedades físicas, químicas e biológicas, de acordo com o objetivo pretendido, tornam esta classe de compostos, um grande objeto de estudo de inúmeros investigadores. Desde os inícios da sua aplicação até à atualidade, a investigação nesta área expandiu o seu raio de ação, estando já descrito o seu potencial como agentes antimicrobianos e, mais recentemente, como compostos farmacêuticos ativos. Atualmente muitas das suas aplicações são baseadas nas suas propriedades biológicas. Esta Tese teve como objetivo avaliar a influência que os LIs podem exercer a nível do crescimento bacteriano e estudar alternativas de combater a resistência bacteriana. Todos os LIs utilizados neste trabalho tinham como anião o ácido valpróico, sendo utilizados catiões orgânicos de amónio e de imidazólio. Foram utilizadas 4 bactérias e avaliou-se a atividade biológica e a respetiva taxa de crescimento. O estudo da sua atividade biológica foi feito através da determinação da Concentração Mínima Inibitória (CMI) e a análise das suas curvas de crescimentos na presença e ausência de composto. Com este trabalho foi possível verificar que dentro dos compostos em estudo, LIs derivados do valproato, o Valproato com o cetilperidínio [valp] [cetylpir] foi o que influenciou o crescimento de todas as bactérias estudadas. Este estudo demonstrou o potencial antibacteriano de alguns compostos, podendo desta forma vir a ser utilizados para fins farmacêuticos

Argyria. Case Report

A 70-year-old male rural worker was referred to our clinic with widespread grey pigmentation of the skin and nails. The condition had been asymptomatic for its entire duration (5 years). He reported past intranasal application of 10% Silver Vitellinate. A skin biopsy was performed and histology corroborated the clinical diagnosis of Argyria. This case represents a currently rare dermatological curiosity. Although silver colloids and salts have been withdrawn and/or banned by some drug surveillance agencies, they continue to be freely sold and unregulated as food supplements and as ingredients in alternative medicines, thereby risking the emergence of new cases of silver poisoning.

Design of bio-inspired ionic liquids for protein stabilisation

Ionic Liquids (ILs) consist in organic salts that are liquid at/or near room temperature. Since ILs are entirely composed of ions, the formation of ion pairs is expected to be one essential feature for describing solvation in ILs. In recent years, protein - ionic liquid (P-IL) interactions have been the subject of intensive studies mainly because of their capability to promote folding/unfolding of proteins. However, the ion pairs and their lifetimes in ILs in P-IL thematic is dismissed, since the action of ILs is therefore the result of a subtle equilibrium between anion-cation interaction, ion-solvent and ion-protein interaction. The work developed in this thesis innovates in this thematic, once the design of ILs for protein stabilisation was bio-inspired in the high concentration of organic charged metabolites found in cell milieu. Although this perception is overlooked, those combined concentrations have been estimated to be ~300 mM among the macromolecules at concentrations exceeding 300 g/L (macromolecular crowding) and transient ion-pair can naturally occur with a potential specific biological role. Hence the main objective of this work is to develop new bio-ILs with a detectable ion-pair and understand its effects on protein structure and stability, under crowding environment, using advanced NMR techniques and calorimetric techniques. The choline-glutamate ([Ch][Glu]) IL was synthesized and characterized. The ion-pair was detected in water solutions using mainly the selective NOE NMR technique. Through the same technique, it was possible to detect a similar ion-pair promotion under synthetic and natural crowding environments. Using NMR spectroscopy (protein diffusion, HSQC experiments, and hydrogen-deuterium exchange) and differential scanning calorimetry (DSC), the model protein GB1 (production and purification in isotopic enrichment media) it was studied in the presence of [Ch][Glu] under macromolecular crowding conditions (PEG, BSA, lysozyme). Under dilute condition, it is possible to assert that the [Ch][Glu] induces a preferential hydration by weak and non-specific interactions, which leads to a significant stabilisation. On the other hand, under crowding environment, the [Ch][Glu] ion pair is promoted, destabilising the protein by favourable weak hydrophobic interactions , which disrupt the hydration layer of the protein. However, this capability can mitigates the effect of protein crowders. Overall, this work explored the ion-pair existence and its consequences on proteins in conditions similar to cell milieu. In this way, the charged metabolites found in cell can be understood as key for protein stabilisation.