982 resultados para green house gas
Resumo:
The two steps of nitrification, namely the oxidation of ammonia to nitrite and nitrite to nitrate, often need to be considered separately in process studies. For a detailed examination, it is desirable to monitor the two-step sequence using online measurements. In this paper, the use of online titrimetric and off-gas analysis (TOGA) methods for the examination of the process is presented. Using the known reaction stoichiometry, combination of the measured signals (rates of hydrogen ion production, oxygen uptake and carbon dioxide transfer) allows the determination of the three key process rates, namely the ammonia consumption rate, the nitrite accumulation rate and the nitrate production rate. Individual reaction rates determined with the TOGA sensor under a number of operation conditions are presented. The rates calculated directly from the measured signals are compared with those obtained from offline liquid sample analysis. Statistical analysis confirms that the results from the two approaches match well. This result could not have been guaranteed using alternative online methods. As a case study, the influences of pH and dissolved oxygen (DO) on nitrite accumulation are tested using the proposed method. It is shown that nitrite accumulation decreased with increasing DO and pH. Possible reasons for these observations are discussed. (C) 2003 Elsevier Science Ltd. All rights reserved.
Resumo:
A partir de uma análise detalhada do processo de infiltração de água no solo, foram propostas alternativas para adequação dos parâmetros de entrada do modelo de Green-Ampt-Mein-Larson (GAML), na tentativa de melhorar a eficiência da estimativa da infiltração em alguns solos brasileiros. As adequações consistiram em substituir a condutividade hidráulica do solo saturado (K0) pela taxa de infiltração estável (Tie) e o teor de água do solo saturado (qs) pelo teor de água na zona de transmissão (qw), além de estabelecer uma equação para estimativa do potencial matricial na frente de umedecimento (yf) com base nos parâmetros do modelo de curva de retenção de água de Brooks & Corey. Avaliou-se o desempenho do conjunto de adequações propostas (GAML-t) para estimativa da infiltração de água em três solos: Latossolo Vermelho-Amarelo, Latossolo Vermelho e Argissolo Vermelho. O desempenho do GAML-t foi comparado com o obtido pelo GAML aplicado em sua forma original e adequado segundo cinco diferentes formas, evidenciando-se que o primeiro obteve melhor desempenho nos três solos estudados.
Resumo:
The objective of this work was to evaluate the productive performance of broccoli under different top-dressing organic fertilizations. The experiment was conducted under protected cultivation, in a completely randomized design with four replications, with two plants per experimental unit. Broccoli seedlings were produced in a commercial substrate in styrofoam trays. The seedlings were transplanted to plastic pots containing 10.0 L of substrate made up of subsoil and organic compost at the ratio of 3:1 (v/v), respectively, which is equivalent to about 20.0 t ha-1 of organic compost at planting. After seedling establishment, the top-dressing fertilization treatments were applied: gliricidia biomass associated or not with liquid biofertilizer of cattle manure to the soil and bokashi. Two control treatments were established: one with mineral fertilization recommended for the crop and the other without top-dressing fertilization. The broccoli production was evaluated (commercial standard). Plants that received mineral fertilizer were more productive, however, they were not significantly different (p>0.05), by Dunnet test, from the plants fertilized with 2.5 t ha-1 gliricidiabiomass (dry mass) associated with liquid biofertilizer (2.0 L m-2) applied to soil. Top-dressing fertilizations with only gliricidia, at 2.5 and 5.0 t ha-1 of biomass (dry mass), resulted in no significant increase in production of broccoli inflorescence. The use of bokashi in addition to gliricidia biomass and liquid biofertilizer reduced the efficiency of the fertilization compared with plants that received only gliricidia and liquid biofertilizer.
Resumo:
A possibilidade de escolha de empresas municipais e intermunicipais como entidades cocontratantes é uma "tentação" para os municípios que têm a seu cargo um conjunto de tarefas através das quais visam satisfazer o interesse público local. Terão estas empresas características especiais que as tornam entidades preferenciais para a derrogação das regras da contratação pública? Existe um mercado concorrencial quando estamos perante serviços públicos locais? Justifica-se a aplicação das regras gerais da contratação pública às adjudicações de serviços públicos locais? O mercado em que se desenvolvem as empresas municipais apresenta uma relevância tal que permita haver concorrência? Estas questões têm vindo a ser especialmente tratadas no quadro da jurisprudência comunitária, dentro da qual, é de fazer sobressair o Acórdão Stad Halle, que veio limitar a possibilidade de recurso à exceção "in house providing", ampliando em consequência o âmbito de aplicação das regras gerais da contratação pública, nomeadamente os princípios comunitários da transparência e igualdade de tratamento dos concorrentes. A empresa municipal está mais próxima das necessidades dos cidadãos e, em princípio, estará mais apta para desenvolver um projeto à medida do serviço pretendido. Poderemos questionar se a proximidade da empresa municipal às necessidades reais de certos cidadãos tem uma expressão tal que coloque a empresa numa posição especial relativamente às outras, para permitir a adjudicação direta.
Resumo:
The search for higher profitability in wheat crop with cost reduction technologies that may promote sustainability is an important matter in Brazilian agriculture. This study evaluated the profitability of no-tilled wheat, reducing nitrogen topdressing doses with the cultivation of green manure before the wheat crop. The experiment was carried out in Selvíria (MS), Brazil, in 2009/10. The experiment was arranged in a randomized block design with 36 treatments in splitplots and four replicates. The plots were formed by six types of green manure: Cajanus cajan L. BRS Mandarin, Crotalaria juncea L., Pennisetum americanum L. BRS 1501, fallow area and mixed cropping of Pennisetum americanum L. + Cajanus cajan L. and Pennisetum americanum L. + crotalaria which provided straw for no-tilled wheat in the winter, following the rice crop in the summer. The subplots were formed by six levels of topdressing nitrogen (0, 25, 50, 75, 100 and 125 kg N ha-1) using urea as a nitrogen source. The wheat grown after green manure in the previous winter crop, with no nitrogen topdressing and a rate of 25 kg ha-1 N, had more frequently production costs above the gross income. Wheat production cost after the mixed cropping Pennisetum americanum L. + Cajanus cajan L. and Pennisetum americanum L. + Crotalaria juncea L. from the previous winter crop, combined with nitrogen rates of 50 and 75 kg N ha-1, provided better profitability compared with the other green manures evaluated.
Resumo:
Green manuring is recognized as a viable alternative to improve nutrient cycling in soils. The aim of this study was to evaluate the phytomass production and nutrient accumulation in shoots of the summer green manures jack bean [Canavalia ensiformis (L.) DC.], dwarf pigeon pea (Cajanus cajanvar var. Flavus DC.), dwarf mucuna [Mucuna deeringiana (Bort) Merr] and sunn hemp (Crotalaria juncea L.), under nitrogen fertilization and/or inoculation with N-fixing bacteria. A split plot design was arranged with the four Fabaceae species as main plots and nitrogen fertilization (with and without) and inoculation with diazotrophic bacteria (with and without) as the subplots, in a 2² factorial. The experiment was arranged as a randomized complete block design with four replications. In the conditions of this trial, the sunn hemp had the highest production of shoot phytomass (12.4 Mg ha-1) and nutrient accumulation, while the dwarf mucuna had the lowest production of shoot phytomass (3.9 Mg ha-1) and nutrient accumulation. The results showed no effect of nitrogen fertilization or inoculation with N-fixing bacteria on the production of shoot phytomass and nutrient accumulation, except for inoculation without nitrogen fertilization, resulting in greater P accumulation (p <0.05) in the sunn hemp and greater Zn and Mn accumulation in the dwarf mucuna. These findings indicate that N fertilization or inoculation with N2-fixing bacteria for Fabaceae are low efficiency practices in the edaphoclimatic conditions of this study.
Resumo:
ABSTRACT Green manure promotes efficient suppression of weeds, but green manure species can exhibit distinct behaviors, depending on the environmental conditions. This study aimed to evaluate the potential of soil mulching and weed suppression by spring/summer green manure species grown in the spring/summer season, at different growth stages and after management (cut), for 90 days during the cassava crop cycle. The study was carried out in the 2010/2011 season, in a system managed under agroecological principles. The treatments consisted of different green manure species and arrangements: Crotalaria juncea, Cajanus cajan, Canavalia brasiliensis, Canavalia ensiformis, Pennisetum americanum, Crotalaria juncea and Pennisetum americanum intercropped; Mucuna aterrima, Sorghum bicolor, a mixture of all the green manures in study and a control plot under fallow. The experiment was arranged in a randomized block design with four replications. The evaluations of the soil cover either by the green manures or weeds were performed at 45, 90 and 105 days after the emergence of the green manures. The cassava crop was planted under reduced tillage system at 11 days after the cut of the green manures. The percentage of soil covered by weeds and the dry matter produced were evaluated at 30, 60 and 90 days after planting. The results showed that the green manures had a suppressive effect on weeds during their life cycle, as well as during the first months after its management (cut), composing the mulch.
Resumo:
Questões ambientais passaram a ser introduzidas com maior frequência nos negócios empresariais. Quanto à cadeia de suprimentos, Green Supply Chain Management (GSCM) surge como novo enfoque à responsabilidade das empresas com o meio ambiente. Este artigo objetiva analisar a difusão do conceito e das práticas de GSCM no cenário brasileiro. Para tanto, foram realizadas entrevistas com especialistas do tema cadeia de suprimentos na área de Administração no Brasil. Os resultados indicam que as razões para o lento desenvolvimento do conceito podem relacionar-se com características do mercado nacional, foco empresarial em aspectos internos, falta de legislação rígida e baixa pressão dos consumidores. Especialistas percebem, entretanto, boas perspectivas para o futuro das discussões da temática no País, em virtude da Política Nacional dos Resíduos Sólidos, de pressões do mercado internacional e da busca por certificação ambiental. Este estudo procurou fomentar novas discussões sobre GSCM no Brasil.
Resumo:
ABSTRACTEnvironmental sustainability has become increasingly important to businesses as a response to the rapid depletion of natural resources. Information Technology (IT) in particular represents a meaningful part of the environmental issues that society has been facing. Therefore, Green IT emerges as a way of combining available resources and sustainable and economic policies, thus, generating benefits for both the environment and businesses. The purpose of this paper, hence, is to explain the dynamics of Green IT implementation in organizations in light of the structurationist view of technology. We conducted a case study research based on the cases of three Brazilian companies interested in this movement. Results provide a better understanding of the relationship among technology, individuals, and organization institutional properties, thus enhancing the role played by IT teams in institutionalizing the environmental dimension of sustainability in organizations.
Resumo:
Há muito que se fala do fim do Marketing tal como o conhecemos. A segmentação cada vez maior de mercados e clientes e a importância da customização, tornaram obsoletas a maior parte das abordagens do marketing de massas. A evolução da economia e das TI (tecnologias da informação) e as consequentes alterações que esse processo implicou na cadeia de valor das empresas, nomeadamente das organizações de grande dimensão, fez com que o B2C –Business to Customer – tenha deixado de fazer sentido para estas empresas. O advento da World Wide Web e o impacto que as tecnologias «interactivas» têm actualmente sobre a economia, provocou grandes alterações nas relações entre as organizações e os seus clientes. Ao Marketing de massas sucedeu-se a relação individualizada cliente a cliente, emergente no B2B – Business to Business –one to one, onde mais importante do que as vendas é o relacionamento com o cliente que assume particular importância, nomeada mente em ordem à sua transição para outras zonas de negócio, como a Internet.
Resumo:
Climate change which until recently seemed a luxury for the microfinance sector, now appears to be crucial for the future of the sector. Due to their low adaptive capacity, the millions of MF clients worldwide happen to be the most vulnerable to a changing climate. Adapting previous analysis conducted in Nepal and Bangladesh by Agrawala and Maëlis (2010) to the Brazilian context, in this inductive qualitative study we aim to assess potential synergies between MF and CC actions and what strategies can be harnessed to better respond to CC vulnerabilities at client/MF level. To do so, we investigated the case of the second largest rural microcredit programme in Brazil, Sistema Cresol de Cooperativas de Crédito Rural com Interação Solidária. Albeit important overlaps between Cresol's product envelope and CC strategies exist, there is still room to realise synergies to both mitigate a new potential source of risk to Cresol's portfolio and to increase clients' adaptive capacity.
Resumo:
Demand for power is growing every day, mainly due to emerging economies in countries such as China, Russia, India, and Brazil. During the last 50 years steam pressure and temperature in power plants have been continuously raised to improve thermal efficiency. Recent efforts to improve efficiency leads to the development of a new generation of heat recovery steam generator, where the Benson once-through technology is applied to improve the thermal efficiency. The main purpose of this paper is to analyze the mechanical behavior of a high pressure superheater manifold by applying finite element modeling and a finite element analysis with the objective of analyzing stress propagation, leading to the study of damage mechanism, e.g., uniaxial fatigue, uniaxial creep for life prediction. The objective of this paper is also to analyze the mechanical properties of the new high temperature resistant materials in the market such as 2Cr Bainitic steels (T/P23 and T/P24) and also the 9-12Cr Martensitic steels (T/P91, T/P92, E911, and P/T122). For this study the design rules for construction of power boilers to define the geometry of the HPSH manifold were applied.
Resumo:
The best places to locate the Gas Supply Units (GSUs) on a natural gas systems and their optimal allocation to loads are the key factors to organize an efficient upstream gas infrastructure. The number of GSUs and their optimal location in a gas network is a decision problem that can be formulated as a linear programming problem. Our emphasis is on the formulation and use of a suitable location model, reflecting real-world operations and constraints of a natural gas system. This paper presents a heuristic model, based on lagrangean approach, developed for finding the optimal GSUs location on a natural gas network, minimizing expenses and maximizing throughput and security of supply.The location model is applied to the Iberian high pressure natural gas network, a system modelised with 65 demand nodes. These nodes are linked by physical and virtual pipelines – road trucks with gas in liquefied form. The location model result shows the best places to locate, with the optimal demand allocation and the most economical gas transport mode: by pipeline or by road truck.