Noise levels in a General Surgical Ward : a descriptive study

Aims and objectives.  This study was undertaken to measure and analyse levels of acoustic noise in a General Surgical Ward. Method.  Measurements were undertaken using the Norsonic 116 sound level meter (SLM) recording noise levels in the internationally agreed ‘A’ weighted scale. Noise level data and observational data as to the number of staff present were obtained and recorded at 5-min intervals over three consecutive days. Results.  Results of noise level analysis indicated that mean noise level within this clinical area was 42.28 dB with acute spikes reaching 70 dB(A). The lowest noise level attained was that of 36 dB(A) during the period midnight to 7 a.m. Non-parametric testing, using Spearman's Rho (two-tailed), found a positive relationship between the number of staff present and the level of noise recorded, indicating that the presence of hospital personnel strongly influences the level of noise within this area. Relevance to clinical practice.  Whilst the results of this may seem self-evident in many respects the problems of excessive noise production and the exposure to it for patients, hospital personnel and relatives alike continues unabated. What must be of concern is the psychophysiological effects excessive noise exposure has on individuals, for example, decreased wound healing, sleep deprivation and cardiovascular stimulation.

Predicting the likelihood of QA failure using treatment plan accuracy metrics

This study used automated data processing techniques to calculate a set of novel treatment plan accuracy metrics, and investigate their usefulness as predictors of quality assurance (QA) success and failure. 151 beams from 23 prostate and cranial IMRT treatment plans were used in this study. These plans had been evaluated before treatment using measurements with a diode array system. The TADA software suite was adapted to allow automatic batch calculation of several proposed plan accuracy metrics, including mean field area, small-aperture, off-axis and closed-leaf factors. All of these results were compared the gamma pass rates from the QA measurements and correlations were investigated. The mean field area factor provided a threshold field size (5 cm2, equivalent to a 2.2 x 2.2 cm2 square field), below which all beams failed the QA tests. The small aperture score provided a useful predictor of plan failure, when averaged over all beams, despite being weakly correlated with gamma pass rates for individual beams. By contrast, the closed leaf and off-axis factors provided information about the geometric arrangement of the beam segments but were not useful for distinguishing between plans that passed and failed QA. This study has provided some simple tests for plan accuracy, which may help minimise time spent on QA assessments of treatments that are unlikely to pass.

Treatment plan complexity metrics for predicting IMRT pre-treatment quality assurance results

The planning of IMRT treatments requires a compromise between dose conformity (complexity) and deliverability. This study investigates established and novel treatment complexity metrics for 122 IMRT beams from prostate treatment plans. The Treatment and Dose Assessor software was used to extract the necessary data from exported treatment plan files and calculate the metrics. For most of the metrics, there was strong overlap between the calculated values for plans that passed and failed their quality assurance (QA) tests. However, statistically significant variation between plans that passed and failed QA measurements was found for the established modulation index and for a novel metric describing the proportion of small apertures in each beam. The ‘small aperture score’ provided threshold values which successfully distinguished deliverable treatment plans from plans that did not pass QA, with a low false negative rate.

Prostate radiotherapy treatment plan quality : effects of hip prostheses

Introduction This study aimed to examine the geometric and dosimetric results when radiotherapy treatment plans are designed for prostate cancer patients with hip prostheses. Methods Ten EBRT treatment plans for localised prostate cancer, in the presence of hip prostheses, were analysed and compared with a reference set of 196 treatment plans for localised prostate cancer in patients without prostheses. Crowe et al.’s TADA code [1] was used to extract treatment plan parameters and evaluate doses to target volumes and critical structures against recommended goals [2] and constraints [3, 4]. Results The need to avoid transmitting the radiation beam through the hip prostheses limited the range of gantry angles available for use in both the rotational (VMAT) and the non-rotational (3DCRT and IMRT) radiotherapy treatments. This geometric limitation (exemplified in the VMAT data shown in Fig. 1) reduced the overall quality of the treatment plans for patients with prostheses compared to the reference plans. All plans with prostheses failed the PTV dose homogeneity requirement [2], whereas only 4 % of the plans without prostheses failed this test. Several treatment plans for patients with hip prostheses also failed the QUANTEC requirements that less than 50 % of the rectum receive 50 Gy and less than 35 % of the rectum receive 60 Gy to keep the grade 3 toxicity rate below 10 % [3], or the Hansen and Roach requirement that less than 25 % of the bladder receive 75 Gy [4]. Discussion and conclusions The results of this study exemplify the difficulty of designing prostate radiotherapy treatment plans, where beams provide adequate doses to targeted tissues while avoiding nearby organs at risk, when the presence of hip prostheses limits the available treatment geometries. This work provides qualitative evidence of the compromised dose distributions that can result, in such cases.

Measurement of general and specific approaches to physical activity parenting : a systematic review

Background Parents play a significant role in shaping youth physical activity (PA). However, interventions targeting PA parenting have been ineffective. Methodological inconsistencies related to the measurement of parental influences may be a contributing factor. The purpose of this article is to review the extant peer-reviewed literature related to the measurement of general and specific parental influences on youth PA. Methods A systematic review of studies measuring constructs of PA parenting was conducted. Computerized searches were completed using PubMed, MEDLINE, Academic Search Premier, SPORTDiscus, and PsycINFO. Reference lists of the identified articles were manually reviewed as well as the authors' personal collections. Articles were selected on the basis of strict inclusion criteria and details regarding the measurement protocols were extracted. A total of 117 articles met the inclusionary criteria. Methodological articles that evaluated the validity and reliability of PA parenting measures (n=10) were reviewed separately from parental influence articles (n=107). Results A significant percentage of studies used measures with indeterminate validity and reliability. A significant percentage of articles did not provide sample items, describe the response format, or report the possible range of scores. No studies were located that evaluated sensitivity to change. Conclusion The reporting of measurement properties and the use of valid and reliable measurement scales need to be improved considerably.

General self-efficacy influences affective task reactions during a work simulation : the temporal effects of changes in workload at different levels of control

This study investigated the effects of workload, control, and general self-efficacy on affective task reactions (i.e., demands-ability fit, active coping, and anxiety) during a work simulation. The main goals were: (1) to determine the extent general self-efficacy moderates the effects of demand and control on affective task reactions, and; (2) to determine if this varies as a function of changes in workload. Participants (N=141) completed an inbox activity under conditions of low or high control and within low and high workload conditions. The order of trials varied so that workload increased or decreased. Results revealed individuals with high general self-efficacy reported better demands-abilities fit and active coping as well as less anxiety. Three interactive effects were found. First, it was found that high control increased demands-abilities fit from trial 1 to trial 2, but only when workload decreased. Second, it was found that low efficacious individuals active coping increased in trial 2, but only under high control. Third, it was found that high control helped high efficacious individuals manage anxiety when workload decreased. However, for individuals with low general self-efficacy, neither high nor low control alleviated anxiety (i.e., whether workload increased or decreased over time).

Promoting physical activity to older adults : a preliminary evaluation of three general practice-based strategies

The aim of this study was to explore the feasibility of an exercise scientist (ES) working in general practice to promote physical activity (PA) to 55 to 70 year old adults. Participants were randomised into one of three groups: either brief verbal and written advice from a general practitioner (GP) (G1, N=9); or individualised counselling and follow-up telephone calls from an ES, either with (G3, N=8) or without a pedometer (G2, N=11). PA levels were assessed at week 1, after the 12-wk intervention and again at 24 weeks. After the 12-wk intervention, the average increase in PA was 116 (SD=237) min/wk; N=28, p < 0.001. Although there were no statistically significant between-group differences, the average increases in PA among G2 and G3 participants were 195 (SD=207) and 138 (SD=315) min/wk respectively, compared with no change (0.36, SD=157) in G1. After 24 weeks, average PA levels remained 56 (SD=129) min/wk higher than in week 1. The small numbers of participants in this feasibility study limit the power to detect significant differences between groups, but it would appear that individualised counselling and follow-up contact from an ES, with or without a pedometer, can result in substantial changes in PA levels. A larger study is now planned to confirm these findings.

Depression and belongingness in general and workplace contexts : a cross-lagged longitudinal investigation

Belongingness has been linked to depression. Prior studies have been cross-sectional with few addressing distinct belongingness contexts. This study used structural equation modelling to investigate cross-lagged longitudinal relationships between general belonging, workplace belonging and depressive symptoms in a community sample of 221 working adults measured at two time points three months apart. Measures were: Sense of Belonging Instrument-Psychological (SOBI-P); Psychological Sense of Organizational Membership (PSOM); Depression Anxiety Stress Scales (DASS-21); Kessler Psychological Distress Scale (K10). General belonging was predicted more strongly by depressive symptoms than by baseline general belonging, suggesting that depressive symptoms not only linger but also influence future belongingness cognitions. Neither general nor workplace belonging longitudinally predicted depressive symptoms, however cross-sectional correlations were substantial. The concurrent path between general belongingness and depressive symptoms was strong. Results are consistent with daily process studies suggesting that reduced belongingness precipitates a rapid increase in depressive symptoms which influence longer term belongingness cognitions. Congruent with interpersonal descriptions of depression such as the social-cognitive interpersonal process model, results further suggest that belongingness cognitions are the proximal antecedent of a depressive response. Practitioners should monitor both a general sense of belonging as well as perceived relational value cues in specific contexts.

Promoting physical activity to older adults in general practice

This study aimed to assess the efficacy of a general practice based intervention to increase physical activity (PA) levels among 50-70 year old adults. One hundred and thirty-six inactive patients (50-70 years) were randomised into three groups. All participants received brief advice and a written prescription from a GP. Group one received this 'usual care' only (GP, n=46); group two received individualised counselling and follow-up contact from an Exercise Scientist (ES, n=45); group three received a pedometer to supplement the ES counselling (PED, n=45). The Active Australia Survey was administered at baseline, after the 12- week intervention and at a 24-week follow-up. One-way ANOVA showed no significant group differences at baseline in self-reported PA. Average time spent walking increased in all three groups at the 24-week follow-up (GP, 68158min/wk, p=0.006; ES, 83160min/wk, p=0.001; PED, 87132min/wk, p<0.001). Total time in PA (weighted min/wk) also increased significantly in all three groups (GP, 98 213min/wk, p=0.003; ES, 108 182min/wk, p<0.001; PED, 158 229min/wk, p<0.001 ). The proportion of participants who initially did not meet National PA Guidelines (150 minutes and 5 sessions/week) but who met the Guidelines at the 12 and 24-week follow-up was 15% (12 weeks) and 20% (24 weeks) in the GP group compared with 36% and 24% in the ES group and 20% and 42% in the PED group. All three intervention strategies were effective in increasing PA, but the ES intervention resulted in a higher proportion of active participants after 12 weeks and the PED group resulted in a higher proportion of active participants after 24 weeks.

Promoting physical activity to older adults through general practice

This study aimed to assess the efficacy of a general practice based intervention to increase physical activity (PA) levels among 50-70 year old adults. One hundred and thirty-six inactive patients (50-70 years) were randomised into three groups. All participants received brief advice and a written prescription from a GP. Group one received this 'usual care' only (GP, n=46); group two received individualised counselling and follow-up contact from an Exercise Scientist (ES, n=45); group three received a pedometer to supplement the ES counselling (PED, n=45). The Active Australia Survey was administered at baseline, after the 12- week intervention and at a 24-week follow-up. One-way ANOVA showed no significant group differences at baseline in self-reported PA. Average time spent walking increased in all three groups at the 24-week follow-up (GP, 68158min/wk, p=0.006; ES, 83160min/wk, p=0.001; PED, 87132min/wk, p<0.001). Total time in PA (weighted min/wk) also increased significantly in all three groups (GP, 98 213min/wk, p=0.003; ES, 108 182min/wk, p<0.001; PED, 158 229min/wk, p<0.001 ). The proportion of participants who initially did not meet National PA Guidelines (150 minutes and 5 sessions/week) but who met the Guidelines at the 12 and 24-week follow-up was 15% (12 weeks) and 20% (24 weeks) in the GP group compared with 36% and 24% in the ES group and 20% and 42% in the PED group. All three intervention strategies were effective in increasing PA, but the ES intervention resulted in a higher proportion of active participants after 12 weeks and the PED group resulted in a higher proportion of active participants after 24 weeks.

Survey on BPM Conference impression

In May/June 2014, the Program Committee Chairs of BPM’15 conducted a survey with present and past attendees and submitters to the BPM conference to gather feedback on the general perception of the conference. The survey is available at http://survey.qut.edu.au/f/180586/6bb1/. In particular, the survey included questions about the reputation of the conference, the reasons why survey participants submitted papers, whether they plan to submit to BPM’15, and soliciting input on a number of suggested changes and additions to the conduct of the conference series.

A general approach to tune the vibration properties of the mounting system in the high-speed and heavy-duty engine

Majority of the current research on the mounting system has emphasised on the low/medium power engine, rare work has been reported for the high-speed and heavy-duty engine, the vibration characteristics of which exhibits significantly increased complexity and uncertainty. In this work, a general dynamics model was firstly established to describe the dynamic properties of a mounting system with various numbers of mounts. Then, this model was employed for the optimization of the mounting system. A modified Powell conjugate direction method was developed to improve the optimization efficiency. Basing on the optimization results obtained from the theoretical model, a mounting system was constructed for a V6 diesel engine. The experimental measurement of the vibration intensity of the mounting systems shows excellent agreement with the theoretical calculations, indicating the validity of the model. This dynamics model opens a new avenue in assessing and designing the mounting system for a high-speed and heavy-duty engine. On the other hand, the delineated dynamics model, and the optimization algorithm should find wide applications for other mounting systems, such as the power transmission system which usually has various uncertain mounts.

Beyond the barriers : road construction safety issues from the office and the roadside

Conceptually, the management of safety at roadworks can be seen in a three level framework. At the regulatory level, roadworks operate at the interface between the work environment, governed by workplace health and safety regulations, and the road environment, which is subject to road traffic regulations and practices. At the organizational level, national, state and local governments plan and purchase road construction and maintenance which are then delivered in-house or tendered out to large construction companies who often subcontract multiple smaller companies to supply services and labor. At the operational level, roadworks are difficult to isolate from the general public, hindering effective occupational health and safety controls. This study, from the State of Queensland, Australia, examines how well this tripartite framework functions. It includes reviews of organizational policy and procedures documents; interviews with 24 subject matter experts from various road construction and maintenance organizations, and on-site interviews with 66 road construction personnel. The study identified several factors influencing the translation of safety policies into practice including the cost of safety measures in the context of competitive tendering, lack of firm evidence of the effectiveness of safety measures, and pressures to minimize disruption to the travelling public.