Numerical Simulation of Waves Generated by Seafloor Movements

Waves generated by vertical seafloor movements are simulated by use of a fully nonlinear two-dimensional numerical wave tank. In the source region, the seafloor lifts to a designated height by a generation function. The numerical tests show that file linear theory is only valid for estimating the wave behaviors induced by the seafloor movements with a small amplitude, and the fully nonlinear numerical model should be adopted in the simulation of the wave generation by the large amplitude seafloor movements. Without the background surface waves, many numerical tests on the stable maximum elevations eta(max)(0) are carried out by both the linear theory and the fully nonlinear model. The results of two models are compared and analyzed. For the fully nonlinear model, the influences of the amplitudes and the horizontal lengths on eta(max)(0) are stronger than that of the characteristic duration times. Furthermore, results reveal that there are significant differences between the linear theory and the fully nonlinear model. When the influences of the background surface waves are considered, the corresponding numerical analyses reveal that with the fully nonlinear model the eta(max)(0) near-linearly varies with the wave amplitudes of the surface waves, and the eta(max)(0) has significant dependences on the wave lengths and the wave phases of the surface waves. In addition, the differences between the linear theory and the fully nonlinear model are still obvious, aid these differences are significantly affected by The wave parameters of the background surface waves, such as the wave amplitude, the wave length and the wave phase.

Spatial distributions and seasonal variations of particulate phosphorus in the Jiaozhou Bay in North China

Based oil the measurements of particulate phosphorus (PP) in the Jiaozhou Bay front May 2003 to April 2004, the spatial distribution, seasonal variation and biogeochemical characteristics of PP Were investigated to Understand the fates and roles of phosphorus in the Jiaozhou Bay ecosystem. The Concentration of the total PP ranged from 0. 07 to 2. 09 mu mol/dm(3). The concentration of POP was from 0. 01 to 1. 83 mu mol/dm(3), with all average of with all average of 0. 33 mu mol/dm(3), which accounted for 50. 4% in total PP. In general, file concentrations of IT in surface water show obvious seasonal variations in the Jiaozhou Bay. POP was the highest in spring, which derived front the accumulation of phyto-detritus and was the lowest ill autumn, which was decomposed into seawaters to participate the recycle of phosphorus. PIP was the highest in spring and summer and Was the lowest in autumn and winter. PLP Was Mainly influenced by river input in the inner bay lint POP derived front autochthonous source in the outer bay. Overkill, the concentrations of IT in the inner bay were higher than those in mouth and the Older bay. In the inner bay. the concentrations of IT with the area near the shore were higher than those in the center of the bay. Totally PP showed the decreasing trend with depth especially in spring and winter. The high value of PP emerged in 20 and 10 in Corresponding to summer and autumn, respectively. The changes of POP showed hysteretic effect compared with the changes of Chl a in the investigated year. However, according to the Change of Chl a, the second high value of POP which should be emerged ill October was missing due to the remineralization of POP and participation in the recycle of phosphorus, which lead to the high concentration of orthophosphate in seawaters.

基于IGES的卷曲类工件结构光测量路径规划研究

本文通过对卷曲类工件IGES文件的分析,本文提出了一种新的基于IGES文件的测量路径规划策略。根据张量积曲面的性质,提出了一种曲面组合算法,运用了张量积曲面的性质,将曲面操作转化为多次曲线操作,将IGES文件中存储的多片曲面片组合为一整片曲面,从而为自由曲面测量路径的提取提供了数学模型。运用二次逼近原理,提出了一种B样条曲线上的等距采样算法。通过在实际系统进行实验,上述策略及算法得到了验证,并在自主开发的智能测量建模加工一体化装备中得到了应用。

由电子设备描述文件到设备DTM

随着自动化程度的不断提高,对设备的种类要求越来越广泛,由此带来的设备配置工作越来越繁琐。设备描述技术和FDT/DTM技术的出现解决了这个问题。本文在对这两种技术研究的基础上,从技术实现的角度上对这两种技术做了分析,并提出了一种多技术结合的方法,以适用于复杂多样的工业应用环境。

基于初等运动的多机器人避碰及死锁预防

该文以一实际应用为背景提出了多移动机器人避碰及死锁预防算法 ,该算法将机器人的运行环境形式化地描述为初等运动集、冲突图、总任务集及机器人作业集 ,利用集合论、图论的有关方法及技术实现了多机器人间的避碰与死锁预防 .当机器人的运行环境改变时 ,只需要对相应的集合描述文件进行修改 ,而不用对程序做任何改动 .算法的另一个特点是利用避碰算法巧妙地完成了死锁预防 .仿真和实际运行证明了该算法高效可靠 .

多代理技术在船体装配CAPP系统的应用

本文介绍了多代理技术在船体装配 CAPP系统中应用 .包括 :船体装配 CAPP系统的结构 ,Agent之间的通讯 ,Agent表达方法、提供的函数功能描述 ,以及各工艺代理的功能描述和封装实例 ;采用多代理技术的船体装配 CAPP系统可以生成满足工厂要求的装配工艺文件、工艺定额和材料定额

EDI在CIMS中的应用技术研究

本文在分析了ＥＤＩ与ＣＩＭＳ系统集成的重要性后，提出了用面向报文的方法来组织和实施该项集成过程，然后对该过程中所涉及到的有关技术，包括信息提取、平文件映射和翻译方法等进行了分析，并用基于表格的方法建立平文件模式和映射参考文件，从而有效地实现了ＥＤＩ与ＣＩＭＳ系统的有机集成

STL格式文件拓扑重建及快速切片算法研究

建立三角面片之间拓扑关系是提高分层切片效率的关键因素之一,提出基于标准模板库set容器的拓扑关系重建算法及快速切片算法,有效地去除了STL文件大量冗余数据,简化了数据的存储,该算法每一个三角面片在每一切平面内只求一次交点,切片完成后可直接得到封闭轮廓环,以减少在切片过程中对三角面片的遍历次数、排序次数及求交点计算量,简化了轮廓环的构造过程,从而有效地提高了算法的效率。

波前重建法射线追踪及走时表压缩

As a fast and effective method for approximate calculation of seismic numerical simulation, ray tracing method, which has important theory and practical application value, in terms of seismic theory and seismic simulation, inversion, migration, imaging, simplified from seismic theory according to geometric seismic, means that the main energy of seismic wave field propagates along ray paths in condition of high-frequency asymptotic approximation. Calculation of ray paths and traveltimes is one of key steps in seismic simulation, inversion, migration, and imaging. Integrated triangular grids layout on wavefront with wavefront reconstruction ray tracing method, the thesis puts forward wavefront reconstruction ray tracing method based on triangular grids layout on wavefront, achieves accurate and fast calculation of ray paths and traveltimes. This method has stable and reasonable ray distribution, and overcomes problems caused by shadows in conventional ray tracing methods. The application of triangular grids layout on wavefront, keeps all the triangular grids stable, and makes the division of grids and interpolation of a new ray convenient. This technology reduces grids and memory, and then improves calculation efficiency. It enhances calculation accuracy by accurate and effective description and division on wavefront. Ray tracing traveltime table, which shares the character of 2-D or 3-D scatter data, has great amount of data points in process of seismic simulation, inversion, migration, and imaging. Therefore the traveltime table file will be frequently read, and the calculation efficiency is very low. Due to these reasons, reasonable traveltime table compression will be very necessary. This thesis proposes surface fitting and scattered data compression with B-spline function method, applies to 2-D and 3-D traveltime table compression. In order to compress 2-D (3-D) traveltime table, first we need construct a smallest rectangular (cuboidal) region with regular grids to cover all the traveltime data points, through the coordinate range of them in 2-D surface (3-D space). Then the value of finite regular grids, which are stored in memory, can be calculated using least square method. The traveltime table can be decompressed when necessary, according to liner interpolation method of 2-D (3-D) B-spline function. In the above calculation, the coefficient matrix is stored using sparse method and the liner system equations are solved using LU decomposition based on the multi-frontal method according to the sparse character of the least square method matrix. This method is practiced successfully in several models, and the cubic B-spline function can be the best basal function for surface fitting. It make the construction surface smooth, has stable and effective compression with high approximate accuracy using regular grids. In this way, through constructing reasonable regular grids to insure the calculation efficiency and accuracy of compression and surface fitting, we achieved the aim of traveltime table compression. This greatly improves calculation efficiency in process of seismic simulation, inversion, migration, and imaging.

电离层胶片频高图数字化转换与分析研究

The ionogram acquired with the ionospheric vertical sounding method is the oldest data in the history of ionospheric research. Using of modern microelectronics and computer technology to digitalize, analyse and preserve the huge amount of historical film ionogram has become more and more important and urgent. This paper introduced the progress of the film ionogram digitalization by using digital image processing technologies to correct and repair film ionogram and convert them in an exchangeable format. An analysis and conversion software, basing on this method, has been developed for the film ionogram analysis, and then it introduces the application of this software by combining the SAO Explorer program for Wuhan film ionogram and pseudo-color ionogram in Yamagawa in Japan. It shows that our method is reliable，and the developed software is used friendly and provides a positive solution in digitalization and analysis of huge amount of historical film ionogram. Firstly, we briefly introduce the film ionogram and the process of its digitalization. By observing a amount of film ionogram, we obtain some common characteristics of the digitalized film ionogram following as: (1) the image rotation are caused by scanning; (2) the vertical axis of a large number of film ionogram exist more or less tilt and bending ; (3) coordinates of the film ionogram appear the non-uniformity phenomena result from the instability of driving motor rotation and the error of altitudinal cursor orientation. Moreover, based on the characteristics of the film ionogram and the SAO Explorer software which is widely used for the digital ionogram analysis in the world, a new method has been developed for film ionogram procession. The method contains the image geometric correction and film ionogram format conversion. The image geometric correction includes such as image rotation correction, vertical correction and coordinates scale correction. After geometric correction, the BMP file format images will be converted to the SBF file format images. Then, we also discuss the data format converting methods, which include two methods of the image data mapping basing on the normalization and logarithm, and the method of the preprocessing of the noise filtering and the threshold setting. Combining with SAO Explorer software, we successfully obtain ionospheric parameters and electron profile from the converted SBF file format digital ionograms. Based on the above method, we developed the software for the film ionogram to realize its correction analysis and conversion of the image format, and then give a introduction for its function and operation. Subsequently, the software are applied into the Wuhan film ionogram which separately observed in the high solar activity year and the low in 1980s last century. The results reveal the converted SBF digital ionogram almost preserve the all echo information of the film ionogram. Furthermore, we expressly discuss the application to the Wuhan film ionogram in 1958 in order to validate the applicability and credibility of the software. And it is showed that the important information of the film ionogram are maintained into the SBF digital ionogram. It is represented that there is credibility for conversion of the software when it applied in the older film ionogram. In sum, this software could apply to the digitalization and analysis of huge amount of historical film ionogram. Last, we extended the function of the software by bring some new conversion method and used it to apply to the pseudo-color ionogram of yamagawa in Japan. The results show that the converted ionogram information basically maintain the importantly ionogram information and the error of scaling of converted SBF file format image is almost acceptable, though there is no preprocessing for the original ionogram. Hence, we could extend the applicable range of the software and apply it to all kinds of simulative ionogram imaging by improving the method and software.

DAS24-3B数据采集系统控制系统软件的研制与开发

Under the auspices of the 'knowledge-Innovation Program' of CAS, Institute of Geology and Geophysics has established the Broadband Seismic Laboratory. A new kind of 24-bit high-resolution seismograph DAS24-3B has been designed and manufactured in an effort of developing China's own technology of seismic array. Since these instruments will primarily be used in field operation, there is a need to optimize the system software of data acquisition system (DAS) to enhance its stability, compatibility and maintenance. The design ideas of the system software of DAS24-3B are partly learned from the advanced DAS 72A-08. In this system there are two exclusive communication programs DNAPI-COM1 and DNAPI-LPT1, which are suitable for all standard industrial computers with ECP parallel port and serial port. By these exclusive parallel and serial communication interface the system software is split into three parts, acquisition program, user's control program and graphical display program, which can function well in separate units and can run correctly in whole. The three parts of DAS24-3B's system software possess different functions and advantages. The function of acquisition program is to control the process of seismic data acquisition. DAS24-3B system reduced its power and harddisk read-write disturbance by using the extended memory attached to its CPU, which functions as enlarging the data buffer of system and lessening the times of harddisk read-write operations. Since GPS receiver of DAS is strongly sensitive to the around environment and has the possibility of signal loss the acquisition program has been designed with the ability to automatically trail the GPS locked time. The function of user's controlling program is to configure the system's work environment, to inform the user's commands to DAS, to trail the status of DAS in real-time. The function of graphical display program is to illustrate data in figures, to convert data file into some common formatted file, to split data file in parts and combine data files into one. Both user's control program and graphical display program are API (Application Programming Interface) in window 95/98 system. Both possess the features of clearness and friendship by use of all kind of window controls, which are composed by menu, toolbar, statusbar, dialogue box, message box, edit box, scrollbar, time control, button and so on. Two programs of systemic exception handles are provided to treat the trouble in field. The DAS24-3B DAS has been designed to be easier to use-better ability, more stable and simpler. It has been tested in field and base station and has been proved more suitable for field operation of seismic array than other native instruments.

Os solos do Vale dos Vinhedos.

INTRODUÇÃO. CARACTERIZAÇÃO DA ÁREA. MATERIAL E MÉTODOS. RESULTADOS. CONSIDERAÇÕES FINAIS. REFERÊNCIAS. ANEXOS: Anexo I - Mapa impresso; Mapa de solos do Vale dos Vinhedos, RS. Anexo II - CD-ROM. Anexo IIA - Arquivos digitais para reprodução de cópias impressas - formato pdf (portable document file). Anexo IIB - Arquivos digitais estruturados para uso em SIG - formato shape file. Anexo IIC - Descrição dos perfis do levantamento detalhado de solos do Vale dos Vinhedos, RS

Evaluation of TFTP DDoS Amplification Attack.

Web threats are becoming a major issue for both governments and companies. Generally, web threats increased as much as 600% during last year (WebSense, 2013). This appears to be a significant issue, since many major businesses seem to provide these services. Denial of Service (DoS) attacks are one of the most significant web threats and generally their aim is to waste the resources of the target machine (Mirkovic & Reiher, 2004). Dis-tributed Denial of Service (DDoS) attacks are typically executed from many sources and can result in large traf-fic flows. During last year 11% of DDoS attacks were over 60 Gbps (Prolexic, 2013a). The DDoS attacks are usually performed from the large botnets, which are networks of remotely controlled computers. There is an increasing effort by governments and companies to shut down the botnets (Dittrich, 2012), which has lead the attackers to look for alternative DDoS attack methods. One of the techniques to which attackers are returning to is DDoS amplification attacks. Amplification attacks use intermediate devices called amplifiers in order to amplify the attacker's traffic. This work outlines an evaluation tool and evaluates an amplification attack based on the Trivial File Transfer Proto-col (TFTP). This attack could have amplification factor of approximately 60, which rates highly alongside other researched amplification attacks. This could be a substantial issue globally, due to the fact this protocol is used in approximately 599,600 publicly open TFTP servers. Mitigation methods to this threat have also been consid-ered and a variety of countermeasures are proposed. Effects of this attack on both amplifier and target were analysed based on the proposed metrics. While it has been reported that the breaching of TFTP would be possible (Schultz, 2013), this paper provides a complete methodology for the setup of the attack, and its verification.