Há sinergia entre o sistema lean manufacturing e a gestão ambiental? mapeando o estado da arte

In recent decades, two research themes have been prominent in the academic and organizational setting: lean manufacturing and green management. Since 1996, when Florida (1996) wrote an article focusing on the synergy between these two areas, the debate if “Lean is Green?” enters in the academic field. It is in this context that this research presents the results of a systematic literature on the topic, focusing on the characteristics, positive and negative impacts, lean paradigms, green paradigms and design of supply chains. To perform this procedure it were followed the methodological footsteps of Lage Junior and Godinho Filho (2010). The research occurred in the database Scopus and it was conducted from June, 2012 to July, 2012.The key word used was “green lean” and as search filter it were included only articles and conference Papers. Their main result is a deep analysis of the accumulated knowledge on the subject, where it is revealed that the majority of studies point to the synergy between some components of the lean manufacturing system in relation to environmental management. The research gap found is related to articles that address the entropy of the union of lean and green systems.

Inovação tecnológica de boas práticas agrícolas e a informática na gestão agropecuária

This study aims to develop innovative proposals for production agriculture management and plans to build a participatory model, through the digital inclusion of members of the family farm gathered in a cooperative venture seeking to establish new environmental management efficiency for household production. The first part of the hypothesis assumes that a major obstacle to the insertion of small family farms into the markets is skilled labor, human capital. A training model has been developed for traceability and tracking activities on family farms, based on the atemoya culture. The second hypothesis predicts that it is possible to create a model that is scientifically supported by widely accepted rules derived from GlobalGAP standard certification, a global benchmark for good agricultural practices. Using these rules the model seeks to achieve the traceability of agricultural products and operations from the preservation of identity information within the production chain. The results obtained by the computerized system confirmed the presented hypotheses by demonstrating that technological innovation through intensive communication and information technologies education as well as other associated forms are important drivers of regional development, especially if implemented through a digital inclusion project using the state program Infocentros Access São Paulo.

Productivity, Leaf Nutrient Content and Soil Carbon Stocked in Agroforestry and Traditional Management of Maize (Zea mays L.)

The aim of the work was to evaluate the productivity, leaf nutrient content and soil nutrient concentration in maize (Zea mays L.) grown in sequence with black oats (Avena strigosa Schreb.) under Leucaena diversifolia alley cropping agroforestry system (AFS) and traditional management system/sole crop (without trees-TS), after two years of cultivation following a randomized block design. The experiment was carried out in the Brazilian Association of Biodynamic Agriculture, in Botucatu—S?o Paulo, Brazil. Treatments were: control (C), chemical fertilizer application (F), biomass of L. diversifolia alley cropping application (B), biomass of L. diversifolia alley cropping + chemical fertilizer application (B + F). In the second year of management it was observed that black oat yield was higher in treatments B + F and F with significant difference in relation to the others treatments in both systems, followed by treatment B. Between systems, only treatment B showed significant difference, with higher yield value corresponding to AFS, reflecting the efficiency of AFS to promote soil fertility. Maize production presented the second year of cultivation an increasing trend in all treatments in both production systems. This result may be due to the cumulative effect of mineralization and maize straw and oats, along the experiment. How productivity was higher in the AFS system, could also be occurring effect of biological nitrogen fixation, water retention and reduction of extreme microclimate through the rows of L. diversifolia. Comparing the AFS and TS, it was observed that the concentration of N in leaf tissue was higher in the AFS treatments, probably due to nitrogen fixation performed through the rows of L. diversifolia, that is a nitrogen fixing tree species. After two years, carbon stocked in soil show higher values in the treatments biomass + fertilizer and biomass application, in both systems, AFS and TS.

Conflito de interesses ambientais e urbanísticos dentro do contexto da gestão sustentável de cidades de médio porte no Estado de São Paulo

Responsible entrepreneurs responsible for housing project "Vale do Sol III" (claim of deployment) had proposed technique in order to solve conflicts of interest, arising with respect to residents of Vale do Sol I (already implemented). Conflicts gave up due to environmental and urban problems, originated in a notification of responsible concessionaire for the administration of Marechal Rondon highway (entry and exit of people on the road, in the city of Botucatu, Sao Paulo state). This work, based on study case method, within a deductive approach, analyzed urban and environmental aspects of the area in order to contribute to sustainable management of medium-sized cities. There was, moreover, use of GIS software for purpose of supporting this technical analysis. Investigations were carried out within environmental and urban viewpoints about Água Fria watershed, as well as technical and legal basis arising devices both municipal and federal regulations. It was concluded that proposed project of Vale do Sol III, about containment of stormwater and alternative technical and locational traffic, not presented as necessary solution, sufficient and satisfactory in the sense of, at least, mitigate sustainability problems of surrounding area (Água Fria watershed, into which could insert even Vale do Sol I condominium, subject to notification).

Avaliação dos ambientes de proteção da bacia hidrográfica do rio Jundiaí-Mirim/SP

Pós-graduação em Ciências Ambientais - Sorocaba

Gestão ambiental e o meio urbano do município de Franca: uma abordagem a partir da Política Nacional de Resíduos Sólidos

Pós-graduação em Planejamento e Análise de Políticas Públicas - FCHS

Contribuição dos indicadores de sustentabilidade na gestão urbano ambiental

Recently in Brazil cities have been suffering strong influence concerning concepts of sustainable development and urban-environmental management in order to implement public policies. These approaches combined, subsidize fair democratic construction, along with citizen participation and transparency regarding the use of resources. This study was meant to address the evaluation of performance and environmental quality through the use of sustainability indicators as a tool for planning and management of municipal urban-environmental, its advantages, disadvantages and contributions to the effectiveness in the implementation of policies aimed at local sustainable development. The main objective of the study was to do a comparative analysis of the indicators used in Piracicaba, to the national indicator system and other municipal programs, and also, its application in urban and environmental planning. To achieve this goal, initially a topic selection was made based on a bibliographic analysis in order to discuss the use of management tools and municipal evaluation systems from the perspective of sustainability, showing the management tools such as laws, agreements, documents and mainly, sustainability indicators. It was then, prepared the case study carried out in Piracicaba, São Paulo municipality. With the obtained results, it was possible to provide a model which shows strengths and weaknesses of public actions and policies for the environment, such as project suggestions that could be applied aiming greater sustainability and continuous improvement of municipal environmental performance

The Impact of Green Supply Chain Practices on Supply Chain Performance

Supply Chain Management (SCM) has become a critical factor to sustain organization’s competitive advantages. In this regard, many firms and researchers have attempted to find out factors that affect either positively or negatively on SCM. Recently, Green Supply Chain Management (GSCM) has been receiving the spotlight in many studies. Social and political concerns about the environment in Korea emerged in the early 1990s when Korean government established new environmental regulations in order to implement environmental management throughout the entire supply chain. The Korean government established national GSCM strategies. However, there has been minimal research on measuring GSCM performance among Korean enterprises. It is critical to conduct the research on the relationship between GSCM practices and supply chain performance among Korean firms. In this research, the relationship among Korean enterprises will be empirically tested. The supply chain performance measurement system includes three dimensions: resource, output, and flexibility.

Gestão ambiental e o meio urbano do município de Franca: uma abordagem a partir da Política Nacional de Resíduos Sólidos

Pós-graduação em Planejamento e Análise de Políticas Públicas - FCHS

Contribuição dos indicadores de sustentabilidade na gestão urbano ambiental

Recently in Brazil cities have been suffering strong influence concerning concepts of sustainable development and urban-environmental management in order to implement public policies. These approaches combined, subsidize fair democratic construction, along with citizen participation and transparency regarding the use of resources. This study was meant to address the evaluation of performance and environmental quality through the use of sustainability indicators as a tool for planning and management of municipal urban-environmental, its advantages, disadvantages and contributions to the effectiveness in the implementation of policies aimed at local sustainable development. The main objective of the study was to do a comparative analysis of the indicators used in Piracicaba, to the national indicator system and other municipal programs, and also, its application in urban and environmental planning. To achieve this goal, initially a topic selection was made based on a bibliographic analysis in order to discuss the use of management tools and municipal evaluation systems from the perspective of sustainability, showing the management tools such as laws, agreements, documents and mainly, sustainability indicators. It was then, prepared the case study carried out in Piracicaba, São Paulo municipality. With the obtained results, it was possible to provide a model which shows strengths and weaknesses of public actions and policies for the environment, such as project suggestions that could be applied aiming greater sustainability and continuous improvement of municipal environmental performance

Photo-Fenton oxidation of phenol and organochlorides (2,4-DCP and 2,4-D) in aqueous alkaline medium with high chloride concentration

A highly concentrated aqueous saline-containing solution of phenol, 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4-dichlorophenol (2.4-DCP) was treated by the photo-Fenton process in a system composed of an annular reactor with a quartz immersion well and a medium-pressure mercury lamp (450 W). The study was conducted under special conditions to minimize the costs of acidification and neutralization, which are usual steps in this type of process. Photochemical reactions were carried out to investigate the influence of some process variables such as the initial concentration of Fe2+ ([Fe2+](0)) from 1.0 up to 2.5 mM, the rate in mmol of H2O2 fed into the system (F-H2O2,F-in) from 3.67 up to 7.33 mmol of H2O2/min during 120 min of reaction time, and the initial pH (pH(0)) from 3.0 up to 9.0 in the presence and absence of NaCl (60.0 g/L). Although the optimum pH for the photo-Fenton process is about 3.0, this particular system performed well in experimental conditions starting at alkaline and neutral pH. The results obtained here are promising for industrial applications, particularly in view of the high concentration of chloride, a known hydroxyl radical scavenger and the main oxidant present in photo-Fenton processes. (C) 2012 Elsevier Ltd. All rights reserved.

A rigorous approach to facilitate and guarantee the correctness of the genetic testing management in human genome information systems

Abstract Background Recent medical and biological technology advances have stimulated the development of new testing systems that have been providing huge, varied amounts of molecular and clinical data. Growing data volumes pose significant challenges for information processing systems in research centers. Additionally, the routines of genomics laboratory are typically characterized by high parallelism in testing and constant procedure changes. Results This paper describes a formal approach to address this challenge through the implementation of a genetic testing management system applied to human genome laboratory. We introduced the Human Genome Research Center Information System (CEGH) in Brazil, a system that is able to support constant changes in human genome testing and can provide patients updated results based on the most recent and validated genetic knowledge. Our approach uses a common repository for process planning to ensure reusability, specification, instantiation, monitoring, and execution of processes, which are defined using a relational database and rigorous control flow specifications based on process algebra (ACP). The main difference between our approach and related works is that we were able to join two important aspects: 1) process scalability achieved through relational database implementation, and 2) correctness of processes using process algebra. Furthermore, the software allows end users to define genetic testing without requiring any knowledge about business process notation or process algebra. Conclusions This paper presents the CEGH information system that is a Laboratory Information Management System (LIMS) based on a formal framework to support genetic testing management for Mendelian disorder studies. We have proved the feasibility and showed usability benefits of a rigorous approach that is able to specify, validate, and perform genetic testing using easy end user interfaces.

A parallel future for Ocean research?

[EN] Today, science is difficult to pursue because funding is so tenuous. In such a financial climate, researchers need to consider parallel alternatives to ensure that scientific research can continue. Based on this thinking, we created BIOCEANSolutions, a company born of a research group. A great variety of environmental regulations and standards have emerged over recent years with the purpose of protecting natural ecosystems. These have enabled us to link our research to the market of environmental management. Marine activities can alter environmental conditions, resulting in changes in physiological states, species diversity, abundance, and biomass in the local biological communities. In this way, we can apply our knowledge, to plankton ecophysiology and biochemical oceanography. We measure enzyme activities as bio-indicators of energy metabolism and other physiological rates and biologic-oceanographic processes in marine organisms. This information provides insight into the health of marine communities, the stress levels of individual organisms, and potential anomalies that may be affecting them. In the process of verifying standards and complying with regulations, we can apply our analytic capability and knowledge. The main analyses that we offer are: (1) the activity of the electron transport system (ETS) or potential respiration (Φ), (2) the physiological measurement of respiration (oxygen consumption), (3) the activity of Isocitrate dehydrogenase (IDH), (4) the respiratory CO2 production, and (5) the activity of Glutamate dehydrogenase (GDH) and (6) the physiological measurement of ammonium excretion. In addition, our experience in a productive research group allows us to pursue and develop technical-experimental activities such as marine and freshwater aquaculture, oceanographic field sampling, as well as providing guidance, counseling, and academic services. In summary, this new company will permit us to create a symbiosis between public and private sectors that serve clients and will allow us to grow and expand as a research team.

Phytoplankton Response to Environmental Variables and Organic Pollutants. Laboratory Cultures and Numerical Simulations Experiments

Herbicides are becoming emergent contaminants in Italian surface, coastal and ground waters, due to their intensive use in agriculture. In marine environments herbicides have adverse effects on non-target organisms, as primary producers, resulting in oxygen depletion and decreased primary productivity. Alterations of species composition in algal communities can also occur due to the different sensitivity among the species. In the present thesis the effects of herbicides, widely used in the Northern Adriatic Sea, on different algal species were studied. The main goal of this work was to study the influence of temperature on algal growth in the presence of the triazinic herbicide terbuthylazine (TBA), and the cellular responses adopted to counteract the toxic effects of the pollutant (Chapter 1 and 2). The development of simulation models to be applied in environmental management are needed to organize and track information in a way that would not be possible otherwise and simulate an ecological prospective. The data collected from laboratory experiments were used to simulate algal responses to the TBA exposure at increasing temperature conditions (Chapter 3). Part of the thesis was conducted in foreign countries. The work presented in Chapter 4 was focused on the effect of high light on growth, toxicity and mixotrophy of the ichtyotoxic species Prymnesium parvum. In addition, a mesocosm experiment was conducted in order to study the synergic effect of the pollutant emamectin benzoate with other anthropogenic stressors, such as oil pollution and induced phytoplankton blooms (Chapter 5).

Agents, nodes & resources: Universal naming system for a coordination middleware

La tesi si propone di sviluppare un modello, l'architettura e la tecnologia per il sistema di denominazione del Middleware Coordinato TuCSoN, compresi gli agenti, i nodi e le risorse. Identità universali che rappresentano queste entità, sia per la mobilità fisica sia per quella virtuale, per un Management System (AMS, NMS, RMS) distribuito; tale modulo si occupa anche di ACC e trasduttori, prevedendo questioni come la tolleranza ai guasti, la persistenza, la coerenza, insieme con il coordinamento disincarnata in rete, come accade con le tecnologie Cloud. All’interno dell’elaborato, per prima cosa si è fatta una introduzione andando a descrivere tutto ciò che è contenuto nell’elaborato in modo da dare una visione iniziale globale del lavoro eseguito. Di seguito (1° capitolo) si è descritta tutta la parte relativa alle conoscenze di base che bisogna avere per la comprensione dell’elaborato; tali conoscenze sono relative a TuCSoN (il middleware coordinato con cui il modulo progettato dovrà interfacciarsi) e Cassandra (sistema server distribuito su cui si appoggia la parte di mantenimento e salvataggio dati del modulo). In seguito (2° capitolo) si è descritto JADE, un middleware da cui si è partiti con lo studio per la progettazione del modello e dell’architettura del modulo. Successivamente (3° capitolo) si è andati a spiegare la struttura e il modello del modulo considerato andando ad esaminare tutti i dettagli relativi alle entità interne e di tutti i legami fra esse. In questa parte si è anche dettagliata tutta la parte relativa alla distribuzione sulla rete del modulo e dei suoi componenti. In seguito (4° capitolo) è stata dettagliata e spiegata tutta la parte relativa al sistema di denominazione del modulo, quindi la sintassi e l’insieme di procedure che l’entità consumatrice esterna deve effettuare per ottenere un “nome universale” e quindi anche tutti i passaggi interni del modulo per fornire l’identificatore all’entità consumatrice. Nel capitolo successivo (5° capitolo) si sono descritti tutti i casi di studio relativi alle interazioni con le entità esterne, alle entità interne in caso in cui il modulo sia o meno distribuito sulla rete, e i casi di studio relativi alle politiche, paradigmi e procedure per la tolleranza ai guasti ed agli errori in modo da dettagliare i metodi di riparazione ad essi. Successivamente (6° capitolo) sono stati descritti i possibili sviluppi futuri relativi a nuove forme di interazione fra le entità che utilizzano questo modulo ed alle possibili migliorie e sviluppi tecnologici di questo modulo. Infine sono state descritte le conclusioni relative al modulo progettato con tutti i dettagli in modo da fornire una visione globale di quanto inserito e descritto nell’elaborato.