Staphylococcal biofilm formation on the surface of three different calcium phosphate bone grafts: a qualitative and quantitative in vivo analysis.

Differences in physico-chemical characteristics of bone grafts to fill bone defects have been demonstrated to influence in vitro bacterial biofilm formation. Aim of the study was to investigate in vivo staphylococcal biofilm formation on different calcium phosphate bone substitutes. A foreign-body guinea-pig infection model was used. Teflon cages prefilled with β-tricalcium phosphate, calcium-deficient hydroxyapatite, or dicalcium phosphate (DCP) scaffold were implanted subcutaneously. Scaffolds were infected with 2 × 10(3) colony-forming unit of Staphylococcus aureus (two strains) or S. epidermidis and explanted after 3, 24 or 72 h of biofilm formation. Quantitative and qualitative biofilm analysis was performed by sonication followed by viable counts, and microcalorimetry, respectively. Independently of the material, S. aureus formed increasing amounts of biofilm on the surface of all scaffolds over time as determined by both methods. For S. epidermidis, the biofilm amount decreased over time, and no biofilm was detected by microcalorimetry on the DCP scaffolds after 72 h of infection. However, when using a higher S. epidermidis inoculum, increasing amounts of biofilm were formed on all scaffolds as determined by microcalorimetry. No significant variation in staphylococcal in vivo biofilm formation was observed between the different materials tested. This study highlights the importance of in vivo studies, in addition to in vitro studies, when investigating biofilm formation of bone grafts.

Interdisciplinary research for the analysis and risk assesment : the case of the municipality of Uspantan Guatemala

Short description of the proposed presentation * lees than 100 words This paper describes the interdisciplinary work done in Uspantán, Guatemala, a city vulnerable to natural hazards. We investigated local responses to landslides that happened in 2007 and 2010 and had a strong impact on the local community. We show a complete example of a systemic approach that incorporates physical, social and environmental aspects in order to understand risks. The objective of this work is to present the combination of social and geological data (mapping), and describe the methodology used for identification and assessment of risk. The article discusses both the limitations and methodological challenges encountered when conducting interdisciplinary research. Describe why it is important to present this topic at the Global Platform in less than 50 words This work shows the benefits of addressing risk in an interdisciplinary perspective, in particular how integrating social sciences can help identify new phenomena and natural hazards and assess risk. It gives a practical example of how one can integrate data from different fields. What is innovative about this presentation? * The use of mapping to combine qualitative and quantitative data. By coupling approaches, we could associate a hazard map with qualitative data gathered by interviews with the population. This map is an important document for the authorities. Indeed, it allows them to be aware of the most dangerous zones, the affected families and the places where it is most urgent to intervene.

Distributional equivalence and subcompositional coherence in the analysis of contingency tables, ratio-scale measurements and compositional data

We consider two fundamental properties in the analysis of two-way tables of positive data: the principle of distributional equivalence, one of the cornerstones of correspondence analysis of contingency tables, and the principle of subcompositional coherence, which forms the basis of compositional data analysis. For an analysis to be subcompositionally coherent, it suffices to analyse the ratios of the data values. The usual approach to dimension reduction in compositional data analysis is to perform principal component analysis on the logarithms of ratios, but this method does not obey the principle of distributional equivalence. We show that by introducing weights for the rows and columns, the method achieves this desirable property. This weighted log-ratio analysis is theoretically equivalent to spectral mapping , a multivariate method developed almost 30 years ago for displaying ratio-scale data from biological activity spectra. The close relationship between spectral mapping and correspondence analysis is also explained, as well as their connection with association modelling. The weighted log-ratio methodology is applied here to frequency data in linguistics and to chemical compositional data in archaeology.

Cannabis use as a means of socialization?: new consumption patterns among heavy users

Purpose: After tobacco and alcohol, cannabis is the most used substance among adolescents in Switzerland. Our aim is to assess whether cannabis use has become an ordinary means of socialization. We hypothesize that cannabis consumption has become a normative, although still illegal, behavior. Methods: As part of a larger qualitative study aimed at assessing new ways [patterns] of cannabis consumption, 16 daily cannabis consumers (11 males) and 2 former heavy consumers (both females), aged 15 to 20 years, participated in interviews and focus groups. Data were transcribed verbatim and analyzed using Atlas.ti qualitative analysis software. Results: Most consumers define the beginning of their consumption as a moment when they made new friends. They commonly use cannabis in group settings, which encourages the belief that all adolescents use cannabis. Thus, cannabis is mainly identified as an everyday social act. Joints are smoked like cigarettes: at all times of the day, during or after school or work with peers, often starting at lunch break, and mostly in public places. Friends offer a joint in a group setting, much like beer in a bar, as a means of making contact. Consumption invariably increases while socializing on vacation: "During vacation, we smoke up to 10-15 joints a day; at the end we're just dead." Additionally, in order to obtain cannabis, consumers have to be part of the right networks; they generally have several dealers to assure their supply, buy and sell themselves, or practice group-buying. As a result, all friends or acquaintances of consumers are themselves cannabis users. For instance, 4 boys, who say they are best friends, always smoke together and that, in order to quit, "All four of us should say to ourselves, 'Okay, now, let's all stop smoking'. That would be the only solution. . .but it would be impossible!" The 2 former consumers state that when they started using cannabis, "I found myself little by little in a vicious circle where I saw only people who also smoked". When they quit, they separated from their group of friends: "Either you make new friends who don't smoke or you smoke." Conclusions: Discussions with consumers demonstrate a normative facet of cannabis consumption as part of teenage socialization. Consequently, cannabis consumers develop a significant dependency since a majority of their friends use cannabis and their consumption involves most of their daily social life. Our study highlights the need for clear messages about the harmful aspects of using this substance while also suggesting that cessation efforts should include helping users separate from their consumption milieu. Sources of Support: Dept. of Public Health of the canton of Vaud.

BIO-INSPIRED COMPUTATIONAL TECHNIQUES APPLIED TO THE CLUSTERING AND VISUALIZATION OF SPATIO-TEMPORAL GEOSPATIAL DATA

The coverage and volume of geo-referenced datasets are extensive and incessantly¦growing. The systematic capture of geo-referenced information generates large volumes¦of spatio-temporal data to be analyzed. Clustering and visualization play a key¦role in the exploratory data analysis and the extraction of knowledge embedded in¦these data. However, new challenges in visualization and clustering are posed when¦dealing with the special characteristics of this data. For instance, its complex structures,¦large quantity of samples, variables involved in a temporal context, high dimensionality¦and large variability in cluster shapes.¦The central aim of my thesis is to propose new algorithms and methodologies for¦clustering and visualization, in order to assist the knowledge extraction from spatiotemporal¦geo-referenced data, thus improving making decision processes.¦I present two original algorithms, one for clustering: the Fuzzy Growing Hierarchical¦Self-Organizing Networks (FGHSON), and the second for exploratory visual data analysis:¦the Tree-structured Self-organizing Maps Component Planes. In addition, I present¦methodologies that combined with FGHSON and the Tree-structured SOM Component¦Planes allow the integration of space and time seamlessly and simultaneously in¦order to extract knowledge embedded in a temporal context.¦The originality of the FGHSON lies in its capability to reflect the underlying structure¦of a dataset in a hierarchical fuzzy way. A hierarchical fuzzy representation of¦clusters is crucial when data include complex structures with large variability of cluster¦shapes, variances, densities and number of clusters. The most important characteristics¦of the FGHSON include: (1) It does not require an a-priori setup of the number¦of clusters. (2) The algorithm executes several self-organizing processes in parallel.¦Hence, when dealing with large datasets the processes can be distributed reducing the¦computational cost. (3) Only three parameters are necessary to set up the algorithm.¦In the case of the Tree-structured SOM Component Planes, the novelty of this algorithm¦lies in its ability to create a structure that allows the visual exploratory data analysis¦of large high-dimensional datasets. This algorithm creates a hierarchical structure¦of Self-Organizing Map Component Planes, arranging similar variables' projections in¦the same branches of the tree. Hence, similarities on variables' behavior can be easily¦detected (e.g. local correlations, maximal and minimal values and outliers).¦Both FGHSON and the Tree-structured SOM Component Planes were applied in¦several agroecological problems proving to be very efficient in the exploratory analysis¦and clustering of spatio-temporal datasets.¦In this thesis I also tested three soft competitive learning algorithms. Two of them¦well-known non supervised soft competitive algorithms, namely the Self-Organizing¦Maps (SOMs) and the Growing Hierarchical Self-Organizing Maps (GHSOMs); and the¦third was our original contribution, the FGHSON. Although the algorithms presented¦here have been used in several areas, to my knowledge there is not any work applying¦and comparing the performance of those techniques when dealing with spatiotemporal¦geospatial data, as it is presented in this thesis.¦I propose original methodologies to explore spatio-temporal geo-referenced datasets¦through time. Our approach uses time windows to capture temporal similarities and¦variations by using the FGHSON clustering algorithm. The developed methodologies¦are used in two case studies. In the first, the objective was to find similar agroecozones¦through time and in the second one it was to find similar environmental patterns¦shifted in time.¦Several results presented in this thesis have led to new contributions to agroecological¦knowledge, for instance, in sugar cane, and blackberry production.¦Finally, in the framework of this thesis we developed several software tools: (1)¦a Matlab toolbox that implements the FGHSON algorithm, and (2) a program called¦BIS (Bio-inspired Identification of Similar agroecozones) an interactive graphical user¦interface tool which integrates the FGHSON algorithm with Google Earth in order to¦show zones with similar agroecological characteristics.

Spatiotemporal analysis of forensic case data: a visualisation approach

Whether for investigative or intelligence aims, crime analysts often face up the necessity to analyse the spatiotemporal distribution of crimes or traces left by suspects. This article presents a visualisation methodology supporting recurrent practical analytical tasks such as the detection of crime series or the analysis of traces left by digital devices like mobile phone or GPS devices. The proposed approach has led to the development of a dedicated tool that has proven its effectiveness in real inquiries and intelligence practices. It supports a more fluent visual analysis of the collected data and may provide critical clues to support police operations as exemplified by the presented case studies.

Design, data management, and population baseline characteristics of the PERFORM magnetic resonance imaging project.

Quantitative information from magnetic resonance imaging (MRI) may substantiate clinical findings and provide additional insight into the mechanism of clinical interventions in therapeutic stroke trials. The PERFORM study is exploring the efficacy of terutroban versus aspirin for secondary prevention in patients with a history of ischemic stroke. We report on the design of an exploratory longitudinal MRI follow-up study that was performed in a subgroup of the PERFORM trial. An international multi-centre longitudinal follow-up MRI study was designed for different MR systems employing safety and efficacy readouts: new T2 lesions, new DWI lesions, whole brain volume change, hippocampal volume change, changes in tissue microstructure as depicted by mean diffusivity and fractional anisotropy, vessel patency on MR angiography, and the presence of and development of new microbleeds. A total of 1,056 patients (men and women ≥ 55 years) were included. The data analysis included 3D reformation, image registration of different contrasts, tissue segmentation, and automated lesion detection. This large international multi-centre study demonstrates how new MRI readouts can be used to provide key information on the evolution of cerebral tissue lesions and within the macrovasculature after atherothrombotic stroke in a large sample of patients.

Cost-effectiveness analysis of a European primary-care physician training in smoking cessation counseling.

BACKGROUND: Physician training in smoking cessation counseling has been shown to be effective as a means to increase quit success. We assessed the cost-effectiveness ratio of a smoking cessation counseling training programme. Its effectiveness was previously demonstrated in a cluster randomized, control trial performed in two Swiss university outpatients clinics, in which residents were randomized to receive training in smoking interventions or a control educational intervention. DESIGN AND METHODS: We used a Markov simulation model for effectiveness analysis. This model incorporates the intervention efficacy, the natural quit rate, and the lifetime probability of relapse after 1-year abstinence. We used previously published results in addition to hospital service and outpatient clinic cost data. The time horizon was 1 year, and we opted for a third-party payer perspective. RESULTS: The incremental cost of the intervention amounted to US$2.58 per consultation by a smoker, translating into a cost per life-year saved of US$25.4 for men and 35.2 for women. One-way sensitivity analyses yielded a range of US$4.0-107.1 in men and US$9.7-148.6 in women. Variations in the quit rate of the control intervention, the length of training effectiveness, and the discount rate yielded moderately large effects on the outcome. Variations in the natural cessation rate, the lifetime probability of relapse, the cost of physician training, the counseling time, the cost per hour of physician time, and the cost of the booklets had little effect on the cost-effectiveness ratio. CONCLUSIONS: Training residents in smoking cessation counseling is a very cost-effective intervention and may be more efficient than currently accepted tobacco control interventions.

Integrative molecular bioinformatics study of human adrenocortical tumors : microRNA, tissue-specific target prediction, and pathway analysis.

MicroRNAs (miRs) are involved in the pathogenesis of several neoplasms; however, there are no data on their expression patterns and possible roles in adrenocortical tumors. Our objective was to study adrenocortical tumors by an integrative bioinformatics analysis involving miR and transcriptomics profiling, pathway analysis, and a novel, tissue-specific miR target prediction approach. Thirty-six tissue samples including normal adrenocortical tissues, benign adenomas, and adrenocortical carcinomas (ACC) were studied by simultaneous miR and mRNA profiling. A novel data-processing software was used to identify all predicted miR-mRNA interactions retrieved from PicTar, TargetScan, and miRBase. Tissue-specific target prediction was achieved by filtering out mRNAs with undetectable expression and searching for mRNA targets with inverse expression alterations as their regulatory miRs. Target sets and significant microarray data were subjected to Ingenuity Pathway Analysis. Six miRs with significantly different expression were found. miR-184 and miR-503 showed significantly higher, whereas miR-511 and miR-214 showed significantly lower expression in ACCs than in other groups. Expression of miR-210 was significantly lower in cortisol-secreting adenomas than in ACCs. By calculating the difference between dCT(miR-511) and dCT(miR-503) (delta cycle threshold), ACCs could be distinguished from benign adenomas with high sensitivity and specificity. Pathway analysis revealed the possible involvement of G2/M checkpoint damage in ACC pathogenesis. To our knowledge, this is the first report describing miR expression patterns and pathway analysis in sporadic adrenocortical tumors. miR biomarkers may be helpful for the diagnosis of adrenocortical malignancy. This tissue-specific target prediction approach may be used in other tumors too.

Analysis and spatial modeling of the indoor radon Swiss data

The present research deals with an important public health threat, which is the pollution created by radon gas accumulation inside dwellings. The spatial modeling of indoor radon in Switzerland is particularly complex and challenging because of many influencing factors that should be taken into account. Indoor radon data analysis must be addressed from both a statistical and a spatial point of view. As a multivariate process, it was important at first to define the influence of each factor. In particular, it was important to define the influence of geology as being closely associated to indoor radon. This association was indeed observed for the Swiss data but not probed to be the sole determinant for the spatial modeling. The statistical analysis of data, both at univariate and multivariate level, was followed by an exploratory spatial analysis. Many tools proposed in the literature were tested and adapted, including fractality, declustering and moving windows methods. The use of Quan-tité Morisita Index (QMI) as a procedure to evaluate data clustering in function of the radon level was proposed. The existing methods of declustering were revised and applied in an attempt to approach the global histogram parameters. The exploratory phase comes along with the definition of multiple scales of interest for indoor radon mapping in Switzerland. The analysis was done with a top-to-down resolution approach, from regional to local lev¬els in order to find the appropriate scales for modeling. In this sense, data partition was optimized in order to cope with stationary conditions of geostatistical models. Common methods of spatial modeling such as Κ Nearest Neighbors (KNN), variography and General Regression Neural Networks (GRNN) were proposed as exploratory tools. In the following section, different spatial interpolation methods were applied for a par-ticular dataset. A bottom to top method complexity approach was adopted and the results were analyzed together in order to find common definitions of continuity and neighborhood parameters. Additionally, a data filter based on cross-validation was tested with the purpose of reducing noise at local scale (the CVMF). At the end of the chapter, a series of test for data consistency and methods robustness were performed. This lead to conclude about the importance of data splitting and the limitation of generalization methods for reproducing statistical distributions. The last section was dedicated to modeling methods with probabilistic interpretations. Data transformation and simulations thus allowed the use of multigaussian models and helped take the indoor radon pollution data uncertainty into consideration. The catego-rization transform was presented as a solution for extreme values modeling through clas-sification. Simulation scenarios were proposed, including an alternative proposal for the reproduction of the global histogram based on the sampling domain. The sequential Gaussian simulation (SGS) was presented as the method giving the most complete information, while classification performed in a more robust way. An error measure was defined in relation to the decision function for data classification hardening. Within the classification methods, probabilistic neural networks (PNN) show to be better adapted for modeling of high threshold categorization and for automation. Support vector machines (SVM) on the contrary performed well under balanced category conditions. In general, it was concluded that a particular prediction or estimation method is not better under all conditions of scale and neighborhood definitions. Simulations should be the basis, while other methods can provide complementary information to accomplish an efficient indoor radon decision making.

Investigation of high-resolution functional magnetic resonance imaging by means of surface and array radiofrequency coils at 7 T.

In this investigation, high-resolution, 1x1x1-mm(3) functional magnetic resonance imaging (fMRI) at 7 T is performed using a multichannel array head coil and a surface coil approach. Scan geometry was optimized for each coil separately to exploit the strengths of both coils. Acquisitions with the surface coil focused on partial brain coverage, while whole-brain coverage fMRI experiments were performed with the array head coil. BOLD sensitivity in the occipital lobe was found to be higher with the surface coil than with the head array, suggesting that restriction of signal detection to the area of interest may be beneficial for localized activation studies. Performing independent component analysis (ICA) decomposition of the fMRI data, we consistently detected BOLD signal changes and resting state networks. In the surface coil data, a small negative BOLD response could be detected in these resting state network areas. Also in the data acquired with the surface coil, two distinct components of the positive BOLD signal were consistently observed. These two components were tentatively assigned to tissue and venous signal changes.

Using Digital Video Analysis to Monitor Driver Behavior at Intersections

Commercially available instruments for road-side data collection take highly limited measurements, require extensive manual input, or are too expensive for widespread use. However, inexpensive computer vision techniques for digital video analysis can be applied to automate the monitoring of driver, vehicle, and pedestrian behaviors. These techniques can measure safety-related variables that cannot be easily measured using existing sensors. The use of these techniques will lead to an improved understanding of the decisions made by drivers at intersections. These automated techniques allow the collection of large amounts of safety-related data in a relatively short amount of time. There is a need to develop an easily deployable system to utilize these new techniques. This project implemented and tested a digital video analysis system for use at intersections. A prototype video recording system was developed for field deployment. A computer interface was implemented and served to simplify and automate the data analysis and the data review process. Driver behavior was measured at urban and rural non-signalized intersections. Recorded digital video was analyzed and used to test the system.

Automatic quality assessment in structural brain magnetic resonance imaging

MRI has evolved into an important diagnostic technique in medical imaging. However, reliability of the derived diagnosis can be degraded by artifacts, which challenge both radiologists and automatic computer-aided diagnosis. This work proposes a fully-automatic method for measuring image quality of three-dimensional (3D) structural MRI. Quality measures are derived by analyzing the air background of magnitude images and are capable of detecting image degradation from several sources, including bulk motion, residual magnetization from incomplete spoiling, blurring, and ghosting. The method has been validated on 749 3D T(1)-weighted 1.5T and 3T head scans acquired at 36 Alzheimer's Disease Neuroimaging Initiative (ADNI) study sites operating with various software and hardware combinations. Results are compared against qualitative grades assigned by the ADNI quality control center (taken as the reference standard). The derived quality indices are independent of the MRI system used and agree with the reference standard quality ratings with high sensitivity and specificity (>85%). The proposed procedures for quality assessment could be of great value for both research and routine clinical imaging. It could greatly improve workflow through its ability to rule out the need for a repeat scan while the patient is still in the magnet bore.

Cannabis and tobacco co-consumptions: can cannabis consumers quit cigarette smoking?

Purpose: To assess the relation between cannabis and tobacco consumption among adolescents in Switzerland and whether cannabis and tobacco co-users can quit cigarette smoking. Methods: Based on individual interviews and focus groups, 22 youths aged 15-20 discussed cannabis consumption behaviours. Twenty (14 males) were cannabis consumers - of which 18 also smoked tobacco and 2 quit tobacco smoking - and 2 were former cannabis consumers (both females and daily smokers). Data were transcribed verbatim and analyzed using Atlas.ti qualitative analysis software. Results: Among the co-consumers, 9 started with tobacco, 7 with cannabis, and 2 with both. The main consumption mode among all cannabis consumers is joints, while other ways of consuming such as food preparations and water pipes are rare and experimental. Joints always mix cannabis with tobacco for 3 reasons: to burn correctly, pure cannabis is too strong, and smoking cannabis alone is too expensive. Two cannabis consumers - one former tobacco smoker and one occasional tobacco smoker - consider rolling tobacco less addictive than cigarette tobacco alone, and hence use it in their joints. Overall cannabis is considered 'natural' and less harmful to health than tobacco. Thus, many users describe their wish, in the longer term, to quit tobacco consumption without excluding occasional cannabis consumption. Nonetheless, all coconsumers declare that they smoke cigarettes as a substitute for cannabis: For example, "If I don't have a joint, I need fags; if I don't have fags, I need joints; and if I don't have anything, I go crazy!" or "About 20 minutes after smoking a joint we feel like smoking something again, because in the joint there is pure tobacco without a filter as in cigarettes, and that creates a crazy dependency!". Finally, all co-consumers state that the consumption of one of the substances increases when trying to diminish the other: "A few months ago I stopped smoking joints for a month. Well I was smoking more than a pack [of cigarettes] a day." Similarly, the 2 former cannabis consumers increased their cigarette use since quitting cannabis. Conclusions: The majority of cannabis users co-consume tobacco as a way of compensating for one substance or the other. Using tobacco within joints implies that there is a risk that even occasional joints can revive nicotine addiction. Consequently, health professionals wishing to help adolescents in substance use cessation and prevention efforts should consider both substances in a global perspective. Sources of Support: Dept. of Public Health of the canton of Vaud.

Environmental data mining and modeling based on machine learning algorithms and geostatistics

The paper presents some contemporary approaches to spatial environmental data analysis. The main topics are concentrated on the decision-oriented problems of environmental spatial data mining and modeling: valorization and representativity of data with the help of exploratory data analysis, spatial predictions, probabilistic and risk mapping, development and application of conditional stochastic simulation models. The innovative part of the paper presents integrated/hybrid model-machine learning (ML) residuals sequential simulations-MLRSS. The models are based on multilayer perceptron and support vector regression ML algorithms used for modeling long-range spatial trends and sequential simulations of the residuals. NIL algorithms deliver non-linear solution for the spatial non-stationary problems, which are difficult for geostatistical approach. Geostatistical tools (variography) are used to characterize performance of ML algorithms, by analyzing quality and quantity of the spatially structured information extracted from data with ML algorithms. Sequential simulations provide efficient assessment of uncertainty and spatial variability. Case study from the Chernobyl fallouts illustrates the performance of the proposed model. It is shown that probability mapping, provided by the combination of ML data driven and geostatistical model based approaches, can be efficiently used in decision-making process. (C) 2003 Elsevier Ltd. All rights reserved.