Le développement et la mise à l’essai d’une formation sur l’évaluation et la gestion du risque de violence à l’aide de la grille DASAfr. auprès d’intervenants dans le domaine de la psychiatrie légale

Rapport de stage présenté à la Faculté des sciences infirmières en vue de l'obtention du grade de Maître ès sciences (M.Sc.) en sciences infirmières option formation

Patient-specific anisotropic model of human trunk based on MR data

There are many ways to generate geometrical models for numerical simulation, and most of them start with a segmentation step to extract the boundaries of the regions of interest. This paper presents an algorithm to generate a patient-specific three-dimensional geometric model, based on a tetrahedral mesh, without an initial extraction of contours from the volumetric data. Using the information directly available in the data, such as gray levels, we built a metric to drive a mesh adaptation process. The metric is used to specify the size and orientation of the tetrahedral elements everywhere in the mesh. Our method, which produces anisotropic meshes, gives good results with synthetic and real MRI data. The resulting model quality has been evaluated qualitatively and quantitatively by comparing it with an analytical solution and with a segmentation made by an expert. Results show that our method gives, in 90% of the cases, as good or better meshes as a similar isotropic method, based on the accuracy of the volume reconstruction for a given mesh size. Moreover, a comparison of the Hausdorff distances between adapted meshes of both methods and ground-truth volumes shows that our method decreases reconstruction errors faster. Copyright © 2015 John Wiley & Sons, Ltd.

Personnel Management Practices in the Kerala based Scheduled commercial Banks

The thesis entitled Personnel Management Practices in the Kerala-Based Scheduled Commercial Banks. Personnel management function is of cardinal importance, requiring a sophisticated and scientific approach. In a labour-intensive, service industry like banking. Productivity and ultimate profitability of the entire organization depend considerably on the effectiveness with which personnel management function is executed; and the prudence with which personnel problems are handle. The main objectives of the study are to understand the current status of personnel management functions in the banks and to evaluate the practices in the light of the principles and theories of personnel management so as to identify the strengths and weaknesses. The universe of this study is the eight Scheduled Commercial Banks based in Kerala. The major limitation of the study is that as State Bank of Travancore, the lone public sector bank based in Kerala did not grant permission for collection of data, this study had to be confined to private sector banks only. Almost the entire data used for this study are primary and were collected from the files and other records or the concerned banks. This report has chapters dealing with the functional areas of personnel management such as determination of human resource requirements, recruitment and selection, training and development, performance appraisal, promotions and compensation. Findings reveal that the practice of personnel management in the Kerala-based private sector scheduled commercial banks has not gained a degree of sophistication compatible with its role in modern business management.

A Prototype for a Multimodal Biometric Security system based on Face and Audio Signatures

Any automatically measurable, robust and distinctive physical characteristic or personal trait that can be used to identify an individual or verify the claimed identity of an individual, referred to as biometrics, has gained significant interest in the wake of heightened concerns about security and rapid advancements in networking, communication and mobility. Multimodal biometrics is expected to be ultra-secure and reliable, due to the presence of multiple and independent—verification clues. In this study, a multimodal biometric system utilising audio and facial signatures has been implemented and error analysis has been carried out. A total of one thousand face images and 250 sound tracks of 50 users are used for training the proposed system. To account for the attempts of the unregistered signatures data of 25 new users are tested. The short term spectral features were extracted from the sound data and Vector Quantization was done using K-means algorithm. Face images are identified based on Eigen face approach using Principal Component Analysis. The success rate of multimodal system using speech and face is higher when compared to individual unimodal recognition systems

Feature Extraction Methods Based on Linear Predictive Coding and Wavelet Packet Decomposition for Recognizing Spoken Words in Malayalam

Speech signals are one of the most important means of communication among the human beings. In this paper, a comparative study of two feature extraction techniques are carried out for recognizing speaker independent spoken isolated words. First one is a hybrid approach with Linear Predictive Coding (LPC) and Artificial Neural Networks (ANN) and the second method uses a combination of Wavelet Packet Decomposition (WPD) and Artificial Neural Networks. Voice signals are sampled directly from the microphone and then they are processed using these two techniques for extracting the features. Words from Malayalam, one of the four major Dravidian languages of southern India are chosen for recognition. Training, testing and pattern recognition are performed using Artificial Neural Networks. Back propagation method is used to train the ANN. The proposed method is implemented for 50 speakers uttering 20 isolated words each. Both the methods produce good recognition accuracy. But Wavelet Packet Decomposition is found to be more suitable for recognizing speech because of its multi-resolution characteristics and efficient time frequency localizations

A Comparative Study of Wavelet Based Feature Extraction Techniques in Recognizing Isolated Spoken Words

Speech is a natural mode of communication for people and speech recognition is an intensive area of research due to its versatile applications. This paper presents a comparative study of various feature extraction methods based on wavelets for recognizing isolated spoken words. Isolated words from Malayalam, one of the four major Dravidian languages of southern India are chosen for recognition. This work includes two speech recognition methods. First one is a hybrid approach with Discrete Wavelet Transforms and Artificial Neural Networks and the second method uses a combination of Wavelet Packet Decomposition and Artificial Neural Networks. Features are extracted by using Discrete Wavelet Transforms (DWT) and Wavelet Packet Decomposition (WPD). Training, testing and pattern recognition are performed using Artificial Neural Networks (ANN). The proposed method is implemented for 50 speakers uttering 20 isolated words each. The experimental results obtained show the efficiency of these techniques in recognizing speech

Exchange bias effect in partially oxidized amorphous Fe–Ni–B based metallic glass nanostructures

The magnetic properties of amorphous Fe–Ni–B based metallic glass nanostructures were investigated. The nanostructures underwent a spin-glass transition at temperatures below 100 K and revealed an irreversible temperature following the linear de Almeida–Thouless dependence. When the nanostructures were cooled below 25 K in a magnetic field, they exhibited an exchange bias effect with enhanced coercivity. The observed onset of exchange bias is associated with the coexistence of the spin-glass phase along with the appearance of another spin-glass phase formed by oxidation of the structurally disordered surface layer, displaying a distinct training effect and cooling field dependence. The latter showed a maximum in exchange bias field and coercivity, which is probably due to competing multiple equivalent spin configurations at the boundary between the two spin-glass phases

Schlüsselqualifikationen im Hochschulbereich

Ausgehend von dem von Friedrich Edding geprägten Begriff der Schlüsselfähigkeit entwickelte Dieter Mertens Anfang der 1970er Jahre sein Konzept der Schlüsselqualifikationen. Damit suchte er Wege, Menschen so zu qualifizieren, dass sie ihnen übertragene berufliche Aufgaben, auch in einem sich rasch verändernden Umfeld, bewältigen können. In der vorliegenden Arbeit wird gezeigt, dass die Rezeption des Begriffs in verschiedenen Bildungsbereichen mit unterschiedlichen Intensitäten und Resultaten verlief. Am folgenreichsten war die Rezeption in der Berufsbildung. Von wenigen skeptischen Stimmen abgesehen, stieß das Konzept der Schlüsselqualifikationen auf positive Zustimmung und mehrere Umsetzungsversuche wurden unternommen. Diese führten allerdings zu einer Verlängerung der Liste der Schlüsselqualifikationen (die ursprünglich von Mertens als abschließbar angedacht war). Ein Konsens, was in der Berufsbildung als Schlüsselqualifikationen zu gelten hat, ist immer noch nicht in Sicht. In den allgemeinbildenden Schulen hingegen fand das Konzept keine große Beachtung. Zwar wurde hin und wieder auf den Begriff zurückgegriffen, um beispielsweise allgemein verbindliche Standards in der Schule zu thematisieren oder neuen Inhalten eine Legitimation zu verschaffen, dennoch griff die Debatte in der Schulpädagogik nicht nachhaltig. Gründe dafür liegen zum einen in der dem Konzept inhärenten berufsvorbereitenden Funktion, die der Idealvorstellung einer zweckfreien Bildung widerspricht, zum anderen in der relativ straffen und zentralisierten Gestaltung der Lehrpläne. Die vorliegende Arbeit setzt sich mit dem Konzept der Schlüsselqualifikationen im Hochschulbereich auseinander. Eine Untersuchung von ca. 130 deutsch- und englischsprachigen Arbeiten, die Schlüsselqualifikationen im Hochschulbereich zum Thema haben, belegt eine sehr große Heterogenität der zugrunde liegenden Vorstellungen und konkreten Modelle. Es wird gezeigt, dass die zwei wichtigsten Ordnungsschemata, die gelegentlich zur Abgrenzung der Schlüsselqualifikationen gegenüber anderen Bildungskomponenten herangezogen werden (nämlich die Taxonomie der Lernziele von Bloom und das Handlungskompetenzmodell von Roth in der Weiterentwicklung von Reetz) mit keinem kohärenten Rahmenwerk, das der Fülle der Modelle von Schlüsselqualifikationen im Hochschulbereich gerecht wäre, aufwarten können. Eine Alternative bietet eine diskursanalytische Perspektive foucaultscher Prägung. Begriffen als eine diskursive Formation, haben Modelle der Schlüsselqualifikationen ihre Gemeinsamkeit nicht in dem vermeintlich gemeinsamen Gegenstand. Demnach sind Schlüsselqualifikationen in der heutigen Hochschuldebatte keine Qualifikationen suis generis, die eine eigene Kategorie bilden, sondern eine Antwort auf die Herausforderungen, die die verschiedenartigen Veränderungen in und um Hochschulen mit sich bringen. Es lassen sich drei Kontexte identifizieren, in denen die Modelle der Schlüsselqualifikationen der Herausforderung zu begegnen versuchen: in der Gesellschaft im Allgemeinen, in der vor-universitären Bildung sowie in der Hochschulbildung und in der Berufswelt. In diesen Kontexten artikulieren die Modelle der Schlüsselqualifikationen verschiedene Dimensionen, um Gesellschafts-, Studier und Beschäftigungsfähigkeit der Studierenden zu fördern. Eine vergleichende Analyse der Debatten und Modelle der Schlüsselqualifikationen in der BRD und in England zeigt, dass diese drei Kontexte in beiden Ländern vorfindbar sind, jedoch deren inhaltliche Vorstellung und konkrete Umsetzung aufgrund der Partikularitäten des jeweiligen Hochschulsystems unterschiedliche Akzentuierungen erfahren. Anders als in der BRD betonen die Modelle der Förderung der Studierfähigkeit in England die Brückenkurse als Hilfestellung bei der Vorbereitung auf das Studium. Das hängt mit den uneinheitlichen Zugangsregelungen zum Hochschulstudium und der hierarchischen Struktur im englischen Hochschulsystem zusammen. Bei der Förderung der Beschäftigungsfähigkeit setzen die Modelle der Schlüsselqualifikationen in Deutschland, wo traditionell ein Hochschulstudium als berufsvorbereitend angesehen wird, den Akzent auf Praxisbezug des Studiums und auf Flexibilität. In England hingegen, wo sich das Studium per se nicht als berufsqualifizierend versteht, rücken die Modelle der Schlüsselqualifikationen den Übergang in den Arbeitsmarkt und das Karrieremanagement - subsumiert unter dem Konzept der employability - in den Vordergrund.

Enlarging a training set for genomic selction by imputation of un-genotyped animals in populations of varying genetic architecture

Background: The most common application of imputation is to infer genotypes of a high-density panel of markers on animals that are genotyped for a low-density panel. However, the increase in accuracy of genomic predictions resulting from an increase in the number of markers tends to reach a plateau beyond a certain density. Another application of imputation is to increase the size of the training set with un-genotyped animals. This strategy can be particularly successful when a set of closely related individuals are genotyped. ----- Methods: Imputation on completely un-genotyped dams was performed using known genotypes from the sire of each dam, one offspring and the offspring’s sire. Two methods were applied based on either allele or haplotype frequencies to infer genotypes at ambiguous loci. Results of these methods and of two available software packages were compared. Quality of imputation under different population structures was assessed. The impact of using imputed dams to enlarge training sets on the accuracy of genomic predictions was evaluated for different populations, heritabilities and sizes of training sets. ----- Results: Imputation accuracy ranged from 0.52 to 0.93 depending on the population structure and the method used. The method that used allele frequencies performed better than the method based on haplotype frequencies. Accuracy of imputation was higher for populations with higher levels of linkage disequilibrium and with larger proportions of markers with more extreme allele frequencies. Inclusion of imputed dams in the training set increased the accuracy of genomic predictions. Gains in accuracy ranged from close to zero to 37.14%, depending on the simulated scenario. Generally, the larger the accuracy already obtained with the genotyped training set, the lower the increase in accuracy achieved by adding imputed dams. ----- Conclusions: Whenever a reference population resembling the family configuration considered here is available, imputation can be used to achieve an extra increase in accuracy of genomic predictions by enlarging the training set with completely un-genotyped dams. This strategy was shown to be particularly useful for populations with lower levels of linkage disequilibrium, for genomic selection on traits with low heritability, and for species or breeds for which the size of the reference population is limited.

Knowledge Building in Landscape Architecture

The objective of this study was to develop an internet-based seminar framework applicable for landscape architecture education. This process was accompanied by various aims. The basic expectation was to keep the main characteristics of landscape architecture education also in the online format. On top of that, four further objectives were anticipated: (1) training of competences for virtual team work, (2) fostering intercultural competence, (3) creation of equal opportunities for education through internet-based open access and (4) synergy effects and learning processes across institutional boundaries. This work started with the hypothesis that these four expected advantages would compensate for additional organisational efforts caused by the online delivery of the seminars and thus lead to a sustainable integration of this new learning mode into landscape architecture curricula. This rationale was followed by a presentation of four areas of knowledge to which the seminar development was directly related (1) landscape architecture as a subject and its pedagogy, (2) general learning theories, (3) developments in the ICT sector and (4) wider societal driving forces such as global citizenship and the increase of open educational resources. The research design took the shape of a pedagogical action research cycle. This approach was constructive: The author herself is teaching international landscape architecture students so that the model could directly be applied in practice. Seven online seminars were implemented in the period from 2008 to 2013 and this experience represents the core of this study. The seminars were conducted with varying themes while its pedagogy, organisation and the technological tools remained widely identical. The research design is further based on three levels of observation: (1) the seminar design on the basis of theory and methods from the learning sciences, in particular educational constructivism, (2) the seminar evaluation and (3) the evaluation of the seminars’ long term impact. The seminar model itself basically consists of four elements: (1) the taxonomy of learning objectives, (2) ICT tools and their application and pedagogy, (3) process models and (4) the case study framework. The seminar framework was followed by the presentation of the evaluation findings. The major findings of this study can be summed up as follows: Implementing online seminars across educational and national boundaries was possible both in term of organisation and technology. In particular, a high level of cultural diversity among the seminar participants has definitively been achieved. However, there were also obvious obstacles. These were primarily competing study commitments and incompatible schedules among the students attending from different academic programmes, partly even in different time zones. Both factors had negative impact on the individual and working group performances. With respect to the technical framework it can be concluded that the majority of the participants were able to use the tools either directly without any problem or after overcoming some smaller problems. Also the seminar wiki was intensively used for completing the seminar assignments. However, too less truly collaborative text production was observed which could be improved by changing the requirements for the collaborative task. Two different process models have been applied for guiding the collaboration of the small groups and both were in general successful. However, it needs to be said that even if the students were able to follow the collaborative task and to co-construct and compare case studies, most of them were not able to synthesize the knowledge they had compiled. This means that the area of consideration often remained on the level of the case and further reflections, generalisations and critique were largely missing. This shows that the seminar model needs to find better ways for triggering knowledge building and critical reflection. It was also suggested to have a more differentiated group building strategy in future seminars. A comparison of pre- and post seminar concept maps showed that an increase of factual and conceptual knowledge on the individual level was widely recognizable. Also the evaluation of the case studies (the major seminar output) revealed that the students have undergone developments of both the factual and the conceptual knowledge domain. Also their self-assessment with respect to individual learning development showed that the highest consensus was achieved in the field of subject-specific knowledge. The participants were much more doubtful with regard to the progress of generic competences such as analysis, communication and organisation. However, 50% of the participants confirmed that they perceived individual development on all competence areas the survey had asked for. Have the additional four targets been met? Concerning the competences for working in a virtual team it can be concluded that the vast majority was able to use the internet-based tools and to work with them in a target-oriented way. However, there were obvious differences regarding the intensity and activity of participation, both because of external and personal factors. A very positive aspect is the achievement of a high cultural diversity supporting the participants’ intercultural competence. Learning from group members was obviously a success factor for the working groups. Regarding the possibilities for better accessibility of educational opportunities it became clear that a significant number of participants were not able to go abroad during their studies because of financial or personal reasons. They confirmed that the online seminar was to some extent a compensation for not having been abroad for studying. Inter-institutional learning and synergy was achieved in so far that many teachers from different countries contributed with individual lectures. However, those teachers hardly ever followed more than one session. Therefore, the learning effect remained largely within the seminar learning group. Looking back at the research design it can be said that the pedagogical action research cycle was an appropriate and valuable approach allowing for strong interaction between theory and practice. However, some more external evaluation from peers in particular regarding the participants’ products would have been valuable.

Does interpersonal behavior of psychotherapy trainees differ in private and professional relationships?

• Aim: The present study aimed to evaluate the effect of trainees’ interpersonal behavior on work involvement (WI) and compared their social behavior within professional and private relationships as well as between different psychotherapeutic orientations. • Methods: The interpersonal scales of the Intrex short-form questionnaire and the Work Involvement Scale (WIS) were used to evaluate two samples of German psychotherapy trainees in psychoanalytic, psychodynamic, and cognitive behavioral therapy training. Trainees from Sample 1 (N = 184) were asked to describe their interpersonal behavior in relation to their patients when filling out the Intrex, whereas trainees from Sample 2 (N = 135) were asked to describe the private relationship with a significant other. • Results: Interpersonal affiliation in professional relationships significantly predicted the level of healing involvement, while stress involvement was predicted by interpersonal affiliation and interdependence in trainees’ relationships with their patients. Social behavior within professional relationships provided higher correlations with WI than private interpersonal behavior. Significant differences were found between private and professional relation settings in trainees’ interpersonal behavior with higher levels of affiliation and interdependence with significant others. Differences between therapeutic orientation and social behavior could only be found when comparing trainees’ level of interdependence with the particular relationship setting. • Conclusion: Trainees’ interpersonal level of affiliation in professional relationships is a predictor for a successful psychotherapeutic development. Vice versa, controlling behavior in professional settings can be understood as a risk factor against psychotherapeutic growth. Both results strengthen an evidence-based approach for competence development during psychotherapy training.

View-Based Strategies for 3D Object Recognition

A persistent issue of debate in the area of 3D object recognition concerns the nature of the experientially acquired object models in the primate visual system. One prominent proposal in this regard has expounded the use of object centered models, such as representations of the objects' 3D structures in a coordinate frame independent of the viewing parameters [Marr and Nishihara, 1978]. In contrast to this is another proposal which suggests that the viewing parameters encountered during the learning phase might be inextricably linked to subsequent performance on a recognition task [Tarr and Pinker, 1989; Poggio and Edelman, 1990]. The 'object model', according to this idea, is simply a collection of the sample views encountered during training. Given that object centered recognition strategies have the attractive feature of leading to viewpoint independence, they have garnered much of the research effort in the field of computational vision. Furthermore, since human recognition performance seems remarkably robust in the face of imaging variations [Ellis et al., 1989], it has often been implicitly assumed that the visual system employs an object centered strategy. In the present study we examine this assumption more closely. Our experimental results with a class of novel 3D structures strongly suggest the use of a view-based strategy by the human visual system even when it has the opportunity of constructing and using object-centered models. In fact, for our chosen class of objects, the results seem to support a stronger claim: 3D object recognition is 2D view-based.

Component based recognition of objects in an office environment

We present a component-based approach for recognizing objects under large pose changes. From a set of training images of a given object we extract a large number of components which are clustered based on the similarity of their image features and their locations within the object image. The cluster centers build an initial set of component templates from which we select a subset for the final recognizer. In experiments we evaluate different sizes and types of components and three standard techniques for component selection. The component classifiers are finally compared to global classifiers on a database of four objects.

Rotation Invariant Object Recognition from One Training Example

Local descriptors are increasingly used for the task of object recognition because of their perceived robustness with respect to occlusions and to global geometrical deformations. Such a descriptor--based on a set of oriented Gaussian derivative filters-- is used in our recognition system. We report here an evaluation of several techniques for orientation estimation to achieve rotation invariance of the descriptor. We also describe feature selection based on a single training image. Virtual images are generated by rotating and rescaling the image and robust features are selected. The results confirm robust performance in cluttered scenes, in the presence of partial occlusions, and when the object is embedded in different backgrounds.

Inside the competences evaluation, the stress tolerance of students. An empirical study based on conservation of resources theory

Competence development is considered a preventive strategy of burnout. At an organizational context some competences could be linked as precursors or consequences. In self-assessment of competence development, students perceive stress tolerance as a priority competence to ameliorate. Moreover employers and recruitment consultants agree that this is a new authentic challenge for organizations. The main reasons of this result are debated, this study should consider the importance of competence development from a holistic point of view. In addition it considers the exploration of the relationship between stress tolerance and competence development, according to Conservation Resources (COR) theory (Hobfoll 1988, 1989, 1998, 2004) where the resource loss is considered the principal component in the stress process