External-cavity mode-locked quantum-dot laser diodes for low repetition rate, sub-picosecond pulse generation

This paper presents an investigation of the mode-locking performance of a two-section external-cavity mode-locked InGaAs quantum-dot laser diode, focusing on repetition rate, pulse duration and pulse energy. The lowest repetition rate to-date of any passively mode-locked semiconductor laser diode is demonstrated (310 MHz) and a restriction on the pulse energy (at 0.4 pJ) for the shortest pulse durations is identified. Fundamental mode-locking from 310 MHz to 1.1 GHz was investigated, and harmonic mode-locking was achieved up to a repetition rate of 4.4 GHz. Fourier transform limited subpicosecond pulse generation was realized through implementation of an intra-cavity glass etalon, and pulse durations from 930fs to 8.3ps were demonstrated for a repetition rate of 1 GHz. For all investigations, mode-locking with the shortest pulse durations yielded constant pulse energies of ∼0.4 pJ, revealing an independence of the pulse energy on all the mode-locking parameters investigated (cavity configuration, driving conditions, pulse duration, repetition rate, and output power). © 2011 IEEE.

Modulation formats for next-generation optical datacommunications

This paper considers next-generation optical datacommunication standards and discusses the types of modulation formats that are relevant. The performance of several schemes is considered over multimode fibre. The trade-offs between the different modulation formats are considered in terms of link length, receiver sensitivity and complexity of implementation. © 2011 IEEE.

Generation, flow and utilisation of information on the regional fish trade

The purpose of the study was to provide an in-depth understanding of information generation, flow and utilization within Uganda’s regional fish trade. The study was carried out at district headquarters, border points, landing sites and border markets, involving DFOs, Customs Officials, BMU executives and market managers.

Orthogonal multipulse modulation for next-generation datacommunication links

Orthogonal multipulse modulation is demonstrated to allow ≈30 Gb/s real-time transmission over multimode fibre using an 850 nm VCSEL. The scheme eases considerably component bandwidth requirements compared with conventional NRZ modulation. © 2011 OSA.

Force ripple compensation in a tubular linear generator for marine renewable generation

Tubular permanent magnet linear generators are a promising generator technology for use in marine renewables. One aspect of their design relates to the conditions necessary for achieving a smooth thrust response from the generator, free from cogging and periodic variations due to spatial harmonics of the flux cutting the generator coils. This paper presents an experimental and finite element study of the sources of thrust ripple in a prototype linear generator for marine generation. A simple self-commutated control scheme is shown, which uses linear Hall-effect sensors and look-up-table based feed-forward compensation to derive the excitation currents required to drive the machine with constant force. Details of the controller's FPGA based implementation are given, including its strategy for detecting sensor failure. © 2011 IEEE.

On-going generation of multiple forms of HIV-1 intersubtype recombinants in the Yunnan Province of China

Objectives: To investigate the molecular epidemiology of HIV in China's Yunnan Province, where the initial HIV-1 outbreak among injecting drug users (IDU) occurred in 1989, and to analyse the genesis and interrelationship of the epidemic with that in surrounding areas. Design: A molecular epidemiological investigation was conducted among IDU in three prefectures in Yunnan Province, including Wenshan (east), Honghe (southeast) and Dehong (west). Methods: Thirty-nine specimens were collected from consenting IDU in 2000-2001. The nucleotide sequences of 2.6 kb gag-RT and 340 base pair (bp) env (C2/V3) regions were determined. Phylogenetic tree and recombination breakpoint analyses were performed. Results: The circulating recombinant form (CRF), CRF08_BC, predominated in east Yunnan near Guangxi Province (89% in Wenshan and 81% in Honghe), whereas it was not detected in Dehong(0/14) in the west. In contrast, 71% (10/14) of the Dehong isolates were unique recombinant forms (URF), mostly between subtypes B' (Thailand variant of subtype B) and C, with distinct profiles of recombination breakpoints. The subtype B' accounts for the remaining 29% (4/14) of Dehong isolates. Interestingly, two Honghe isolates (2/16) shared some of the precise B'/C recombination breakpoints with CRF07_BC. Conclusion: New recombinant strains are arising continually in west Yunnan near the Myanmar border. Some appeared to be secondary recombinants derived from CRF07_BC that had further recombined with other strains. The uneven distribution of subtypes, CRF and URF, suggests the presence of independent transmission networks and clusters among IDU in Yunnan. (C) 2002 Lippincott Williams Wilkins.

Ultrashort superradiant pulse generation from a GaN/InGaN heterostructure.

Dicke superradiance from a two-section violet GaN/InGaN semiconductor laser diode is demonstrated for the first time. In the superradiance regime, optical pulses with peak powers in excess of 2.8 W and durations as short as 1.4 ps are generated at repetition rates of up to 10 MHz at the emission wavelength of 408 nm. The properties of superradiant pulse generation from these GaN/InGaN laser diodes are very similar to those reported for infrared AlGaAs/GaAs laser diodes.

Impacts of concurrency, iteration, design review, and problem complexity on design project lead time and error generation

A case study of an aircraft engine manufacturer is used to analyze the effects of management levers on the lead time and design errors generated in an iteration-intensive concurrent engineering process. The levers considered are amount of design-space exploration iteration, degree of process concurrency, and timing of design reviews. Simulation is used to show how the ideal combination of these levers can vary with changes in design problem complexity, which can increase, for instance, when novel technology is incorporated in a design. Results confirm that it is important to consider multiple iteration-influencing factors and their interdependencies to understand concurrent processes, because the factors can interact with confounding effects. The article also demonstrates a new approach to derive a system dynamics model from a process task network. The new approach could be applied to analyze other concurrent engineering scenarios. © The Author(s) 2012.

Measurements and calculations of transport AC loss in second generation high temperature superconducting pancake coils

Theoretical and experimental AC loss data on a superconducting pancake coil wound using second generation (2 G) conductors are presented. An anisotropic critical state model is used to calculate critical current and the AC losses of a superconducting pancake coil. In the coil there are two regions, the critical state region and the subcritical region. The model assumes that in the subcritical region the flux lines are parallel to the tape wide face. AC losses of the superconducting pancake coil are calculated using this model. Both calorimetric and electrical techniques were used to measure AC losses in the coil. The calorimetric method is based on measuring the boil-off rate of liquid nitrogen. The electric method used a compensation circuit to eliminate the inductive component to measure the loss voltage of the coil. The experimental results are consistent with the theoretical calculations thus validating the anisotropic critical state model for loss estimations in the superconducting pancake coil. © 2011 American Institute of Physics.

Phrase-based statistical language generation using graphical models and active learning

Most previous work on trainable language generation has focused on two paradigms: (a) using a statistical model to rank a set of generated utterances, or (b) using statistics to inform the generation decision process. Both approaches rely on the existence of a handcrafted generator, which limits their scalability to new domains. This paper presents BAGEL, a statistical language generator which uses dynamic Bayesian networks to learn from semantically-aligned data produced by 42 untrained annotators. A human evaluation shows that BAGEL can generate natural and informative utterances from unseen inputs in the information presentation domain. Additionally, generation performance on sparse datasets is improved significantly by using certainty-based active learning, yielding ratings close to the human gold standard with a fraction of the data. © 2010 Association for Computational Linguistics.

Nanowires for energy generation

As a result of their morphology, nanowires bring new properties and the promise of performance for a range of electronic devices. This review looks into the properties of nanowires and the multiple ways in which they have been exploited for energy generation, from photovoltaics to piezoelectric generators. © 2012 IOP Publishing Ltd.