965 resultados para border adjustments


Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this work tubular fiber reinforced specimens are tested for fatigue life. The specimens are biaxially loaded with tension and shear stresses, with a load angle β of 30° and 60° and a load ratio of R=0,1. There are many factors that affect fatigue life of a fiber reinforced material and the main goal of this work is to study the effects of load ratio R by obtaining S-N curves and compare them to the previous works (1). All the other parameters, such as specimen production, fatigue loading frequency and temperature, will be the same as for the previous tests. For every specimen, stiffness, temperature of the specimen during testing, crack counting and final fracture mode are obtained. Prior to testing, a study if the literature regarding the load ratio effects on composites fatigue life and with that review estimate the initial stresses to be applied in testing. In previous works (1) similar specimens have only been tested for a load ratio of R=-1 and therefore the behaviour of this tubular specimens for a different load ratio is unknown. All the data acquired will be analysed and compared to the previous works, emphasizing the differences found and discussing the possible explanations for those differences. The crack counting software, developed at the institute, has shown useful before, however different adjustments to the software parameters lead to different cracks numbers for the same picture, and therefore a better methodology will be discussed to improve the crack counting results. After the specimen’s failure, all the data will be collected and stored and fibre volume content for every specimen is also determinate. The number of tests required to make the S-N curves are obtained according to the existent standards. Additionally are also identified some improvements to the testing machine setup and to the procedures for future testing.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

BACKGROUND: Some studies have reported an inverse association between dairy product (DP) consumption and weight or fat mass loss. OBJECTIVES: The objective of our study was to assess the association between DP intake and abdominal obesity (AO) among Azorean adolescents. SUBJECTS/METHODS: This study was a cross-sectional analysis. A total of 903 adolescents (370 boys) aged 15--16 years was evaluated. Anthropometric measurements were collected (weight, height and waist circumference (WC)) and McCarthy’s cut-points were used to categorize WC. AO was defined when WC was X90th percentile. Adolescent food intake was assessed using a self-administered semiquantitative food frequency questionnaire and DP intake was categorized in o2 and X2 servings/day. Data were analyzed separately for girls and boys, and logistical regression was used to estimate the association between DPs and AO adjusting for potential confounders. RESULTS: The prevalence of AO was 54.9% (boys: 32.1% and girls: 70.7%, Po0.001). For boys and girls, DP consumption was 2.3±1.9 and 2.1±1.6 servings/day (P¼0.185), respectively. In both genders, the proportion of adolescents with WC o90th percentile was higher among individuals who reported a dairy intake of X2 servings/day compared with those with an intake o2 servings/day (boys: 71% vs 65% and girls: 36% vs 24%, Po0.05). After adjustments for confounders, two or more DP servings per day were a negative predictor of AO (odds ratio, 0.217; 95% confidence interval, 0.075 -- 0.633) only in boys. CONCLUSION: We found a protective association between DP intake and AO only in boys.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A realização deste trabalho teve por base uma solicitação por parte de uma empresa dedicada ao projecto e fabrico de moldes, assim como à injecção de plásticos, no sentido de projectar um molde para a injecção de uma peça em plástico (PP-Polipropileno +20% ) para a indústria automóvel, segundo os requisitos de qualidade exigidos pelo cliente Assim, atendendo a esses requisitos, foi planeado e elaborado o projecto do respectivo molde para a injecção, tendo em consideração todos os factores que contribuem de forma activa para a obtenção das peças desejadas, com a qualidade exigida e com o tempo de vida desejado para o molde. Tendo início na definição das cavidades e movimentos do molde, passando pela selecção dos materiais mais adequados a cada um dos componentes do molde, selecção de componentes normalizados para o molde, simulação do enchimento e necessidades de arrefecimento, até à execução do molde e análise de possíveis não conformidades nas peças nele injectadas, o trabalho acompanhou todo o processo de criação do molde, desde a recepção das especificações emanadas pelo cliente, até ao teste e realização das correcções finais. Constatou-se que o molde, após ligeiras afinações finais, cumpriu com os objectivos inicialmente traçados, permitindo a obtenção de peças com o formato e qualidade exigidas pelo cliente final.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

European Master Human Rights and Democratisation

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A rede viária de um país proporciona, não só o encurtamento de distâncias como também o desenvolvimento social e económico. Assim, importa que em qualquer ponto do traçado o utilizador possa reconhecer, de forma inequívoca, o seu posicionamento em relação à via e ao seu destino. Neste propósito a sinalização assume um papel fundamental. Sinalização define-se como o interface entre a estrada e o condutor, tendo por base um sistema de comunicação, constituído por mensagens escritas ou simbólicas, que fornecem ao condutor uma correta perceção da estrada em que circula. Este facto, contribui para uma melhoria das condições de segurança rodoviária diminuindo a sua sinistralidade. A nível nacional a sinalização de orientação é regulada pela norma de sinalização vertical de orientação. Todavia identificou-se a necessidade de atualização desta, estando para isso eminente a publicação da versão definitiva da disposição normativa. De referir que ambas não possuem carácter obrigatório, mas constituem um manual de boas práticas na área. Com esta dissertação pretende-se conhecer, a viabilidade e as implicações inerentes à aplicação da disposição normativa, com especial enfoque na metodologia utilizada para a escolha dos destinos inscritos nos painéis de sinalização. Para isso procedeu-se a uma análise comparativa entre a norma de sinalização vertical de orientação e a disposição normativa, através do estudo de casos práticos. Nesse sentido, comparou-se os resultados teóricos obtidos pela aplicação das duas normas e o que, na realidade, se encontra no local. Associadamente procedeu-se a um estudo das normas aplicadas em países europeus de referencia com o intuito de verificar quais as práticas seguidas. Conclui-se, com esta dissertação, que a disposição normativa, pretensa atualização da norma em vigor, carece de diversas melhorias, de forma a proporcionar uma melhor adequação ao panorama rodoviário nacional e proporcionar a continuidade de sinalização orientação transfronteiriça.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The use of appropriate acceptance criteria in the risk assessment process for occupational accidents is an important issue but often overlooked in the literature, particularly when new risk assessment methods are proposed and discussed. In most cases, there is no information on how or by whom they were defined, or even how companies can adapt them to their own circumstances. Bearing this in mind, this study analysed the problem of the definition of risk acceptance criteria for occupational settings, defining the quantitative acceptance criteria for the specific case study of the Portuguese furniture industrial sector. The key steps to be considered in formulating acceptance criteria were analysed in the literature review. By applying the identified steps, the acceptance criteria for the furniture industrial sector were then defined. The Cumulative Distribution Function (CDF) for the injury statistics of the industrial sector was identified as the maximum tolerable risk level. The acceptable threshold was defined by adjusting the CDF to the Occupational, Safety & Health (OSH) practitioners’ risk acceptance judgement. Adjustments of acceptance criteria to the companies’ safety cultures were exemplified by adjusting the Burr distribution parameters. An example of a risk matrix was also used to demonstrate the integration of the defined acceptance criteria into a risk metric. This work has provided substantial contributions to the issue of acceptance criteria for occupational accidents, which may be useful in overcoming the practical difficulties faced by authorities, companies and experts.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Barra de Guaratiba is a coastal area of the city of Rio de Janeiro where American visceral leishmaniasis (AVL) is endemic. Although control measures including killing of dogs and use of insecticides have been applied at this locality, the canine seroprevalence remains at 25% and during 1995 and 1997 eight autochthonous human cases were notified. In order to evaluate factors related to the increase of the risk for Leishmania (Leishmania) chagasi infection in dogs we have screened 365 dogs by anti-Leishmania immunofluorescent antibody test (IFAT) and captured sandflies in the domestic and peridomestic environment. Some variables related to the infection were assessed by uni- and multivariate analysis. The distance of the residence from the forest border, its altitude and the presence of the opossum Didelphis marsupialis in the backyard, were found predictor factors for L. (L.) chagasi infection in dogs in Barra de Guaratiba. The presence of Lutzomyia longipalpis in the peridomestic environment indicates the possibility of appearence of new human cases. Our data also suggest the presence of a sylvatic enzootic cycle at this locality.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Sulfadiazine is an antibiotic of the sulfonamide group and is used as a veterinary drug in fish farming. Monitoring it in the tanks is fundamental to control the applied doses and avoid environmental dissemination. Pursuing this goal, we included a novel potentiometric design in a flow-injection assembly. The electrode body was a stainless steel needle veterinary syringe of 0.8-mm inner diameter. A selective membrane of PVC acted as a sensory surface. Its composition, the length of the electrode, and other flow variables were optimized. The best performance was obtained for sensors of 1.5-cm length and a membrane composition of 33% PVC, 66% onitrophenyloctyl ether, 1% ion exchanger, and a small amount of a cationic additive. It exhibited Nernstian slopes of 61.0 mV decade-1 down to 1.0×10-5 mol L-1, with a limit of detection of 3.1×10-6 mol L-1 in flowing media. All necessary pH/ionic strength adjustments were performed online by merging the sample plug with a buffer carrier of 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, pH 4.9. The sensor exhibited the advantages of a fast response time (less than 15 s), long operational lifetime (60 days), and good selectivity for chloride, nitrite, acetate, tartrate, citrate, and ascorbate. The flow setup was successfully applied to the analysis of aquaculture waters. The analytical results were validated against those obtained with liquid chromatography–tandem mass spectrometry procedures. The sampling rate was about 84 samples per hour and recoveries ranged from 95.9 to 106.9%.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

RESUMO - A preocupação com os conhecimentos, atitudes, crenças e práticas, no que concerne à utilização de radiações ionizantes para fins de diagnóstico, e a sensibilização de todos os agentes envolvidos, médicos, técnicos, físicos, utentes e responsáveis pela Saúde Publica, relativamente aos níveis de radiação emitida nos exames de Tomografia Computorizada (TC), assume particular importância no domínio da Saúde Pública, na medida em que é necessário influenciar o desenvolvimento de práticas que promovam, auditem e garantam a prestação do controlo da qualidade radiológica e dosimétrica nos serviços de Radiologia a nível Nacional. Para tal, e no âmbito da publicação de estudos já realizados ao nível da União Europeia, ―Orientações Europeias dos Critérios de Qualidade para a Tomografia Computorizada (1999) ‖, é proposto estabelecer orientações na realização de estudos que permitam, numa primeira fase, estabelecer a comparação com os resultados obtidos pelos mecanismos de Controlo da Qualidade (CQ), analisar e proceder aos ajustes (se necessário) e, numa segunda fase, implementar uma moldura sistemática de avaliação periódica dos níveis de dose de radiação por exame TC e que permita a monitorização dos dados. Nesse sentido, propõe-se a realização de um Estudo Nacional que envolva a rede hospitalar pública, privada e universitária, partindo da metodologia utilizada em estudos prévios noutros países da Europa, como seja, selecção do equipamento de TC existente na Instituição Hospitalar, onde serão reunidas informações através do preenchimento de questionários relativos ao equipamento a utilizar. Serão recolhidos dados relativos ao utente, ao equipamento e parâmetros de aquisição de imagem, que permitam identificar os níveis de referência de diagnóstico (NRD) em TC, na realidade Portuguesa. Foi efectuado um estudo piloto numa instituição EPE e os valores obtidos não são significativos, nem podem assumir valor preditivo dado o reduzido tamanho da amostra. Apesar disso, sugerem a existência de parâmetros que podem ser alterados e com isso podem fazer variar a dose de radiação utilizada. ENSP/UNL Maria de Fátima Vaz de Carvalho 5 Espera-se obter com este estudo, como foi referido, a base do estabelecimento dos NRD em TC em Portugal. ----------------- ABSTRACT - The purpose of this study, in an empirical point of view, emerges from concern with the knowledge, attitudes, beliefs and practices regarding the use of ionizing radiation for diagnostic purposes and awareness of all actors involved, medical physical, technical, and responsible public health for the development of practices that promote, audited and ensure the provision of radiological quality control and dosing in radiology service at national level. In view of the complexity and characteristics involved in relation to ionizing radiation, all assume their part in protecting the physical integrity of each user and a global perspective, to ensure the safeguarding of public health, while global and globalizing factor. To this end, and in the context of the publication of studies already carried out at European Union level, "European guidelines for quality criteria for computed tomography", it is proposed to establish guidelines in conducting studies to initially establish the comparison with the results obtained by QC and make adjustments if necessary, and subsequently implement a systematic periodic assessment frame that allows monitoring of data. Accordingly, it is proposed to conduct a national study involving the public network, private and University hospitals, that extends from the methodology used in previous studies in other countries of Europe, as is, selection of equipment of existing CT in Hospital Institution, where information will be gathered by filling out questionnaires concerning the equipment to be used. Data will be collected for the wearer, equipment and parameters of image acquisition, identifying diagnostic reference levels (NRD) in CT in Portuguese fact. A pilot study was carried out in an institution EPE and the values obtained are not significant, nor can they take predictive value given the small sample size. Despite this, suggest the existence of parameters that can be changed and this can vary the dose of radiation used It is hoped to get with this study, as mentioned, the basis of the establishment of NRD in CT in Portugal.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The eco-epidemiology of T. cruzi infection was investigated in the Eastern border of the Panama Canal in Central Panama. Between 1999 and 2000, 1110 triatomines were collected: 1050 triatomines (94.6%) from palm trees, 27 (2.4%) from periurban habitats and 33 (3.0%) inside houses. All specimens were identified as R. pallescens. There was no evidence of vector domiciliation. Salivary glands from 380 R. pallescens revealed a trypanosome natural infection rate of 7.6%, while rectal ampoule content from 373 triatomines was 45%. Isoenzyme profiles on isolated trypanosomes demonstrated that 85.4% (n = 88) were T. cruzi and 14.6% (n = 15) were T. rangeli. Blood meal analysis from 829 R. pallescens demonstrated a zoophilic vector behavior, with opossums as the preferential blood source. Seroprevalence in human samples from both study sites was less than 2%. Our results demonstrate that T. cruzi survives in the area in balanced association with R. pallescens, and with several different species of mammals in their natural niches. However, the area is an imminent risk of infection for its population, consequently it is important to implement a community educational program regarding disease knowledge and control measures.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A indústria automóvel exige, em geral, elevados índices de produtividade e qualidade. Para corresponder às exigências deste tipo de indústria, são requeridos métodos avançados de produção, tentando eliminar ao máximo operações que não gerem valor acrescentado e que possam introduzir problemas no processo de garantia da qualidade. A maquinagem por arranque de apara é um processo utilizado de forma intensiva na indústria automóvel. No entanto, enquanto em componentes críticos como o motor, os processos estão já altamente otimizados, o mesmo não se verifica na maior parte dos sistemas periféricos, normalmente realizados por empresas mais pequenas que gravitam em torno dos principais fornecedores da cadeia de produção de automóveis. Os sistemas responsáveis pela movimentação dos limpa pára-brisas e elevação dos vidros, entre outros, encontram-se neste grupo. Este trabalho visa essencialmente otimizar o processo de maquinagem de componentes periféricos de automóveis, sujeitos a diferentes operações em vários planos. No entanto, e tal como em muitas outras situações relacionadas com a variedade de versões existentes na indústria automóvel relativamente a cada sistema, pretende-se que o processo seja suficientemente versátil para poder ser aplicado em vários componentes de uma mesma família de produtos, necessitando de um número de ajustes o mais baixo possível. O estudo passou por uma análise profunda das similaridades geométricas dos diferentes componentes, análise dos planos de maquinagem de cada componente, operações envolvidas, elencagem da necessidade específica de ferramentas, elaboração de gabaritos de fabrico e apresentação da solução final, a qual passa pela introdução de um 4º eixo e do seu controlo através do sistema CNC já existente, assim como pela elaboração de novos programas.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O foco principal no estudo da Internet of Things tem sido a integração de dispositivos digitais com o mundo físico e vice-versa. Os dispositivos inteligentes têm vindo a ganhar uma forte presença na nossa vida diária e cada vez mais, tendem a integrar o sistema de uma casa, automatizando processos comuns como o controlo de temperatura ambiente ou mesmo a percentagem de luminosidade de uma divisão. A visão da IoT contempla um mundo interconectado, recolhendo informações de forma automática e possibilitando a comunicação entre dispositivos. Contudo, as tecnologias existentes para a criação de redes que albergam estes novos dispositivos carecem de padrões bem definidos, dificultando a interoperabilidade entre as diversas soluções existentes. Neste projeto são estudadas e aplicadas as tecnologias mais promissoras aplicáveis ao paradigma Internet of Things, com o objetivo de encontrar um conjunto de protocolos padrão para a implementação de sistemas de automação em casas inteligentes.1 Como objetivo final deste projeto, pretende-se criar uma rede de dispositivos com capacidades sensoriais que tenham a capacidade de comunicar com o mundo externo, permitindo o acesso à rede por qualquer tipo de utilizador. Com isso, espera-se caminhar para mais perto da padronização dos protocolos inerentes à IoT e habilitar interoperabilidade entre as mais diversas soluções. São apresentados e utilizados os protocolos que mais se adaptam ao tema escolhido, tentando simplificar a rede para que esta possa ser incluída em qualquer ambiente doméstico, recorrendo a hardware de custo reduzido. Os protocolos apresentados são o 6LoWPAN, utilizando o protocolo IEEE 802.15.4 como interface de rede juntamente com endereçamento IPv6. É também utilizado o protocolo CoAP na troca de mensagens entre os dispositivos.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

BACKGROUND: Lichen planus is an idiopathic inflammatory disease of the skin and mucous membranes. Although the etiology is not established, it has been associated with autoimmune diseases, viral infections, drugs and dental restoration materials. However, the association with inflammatory bowel disease has been very rarely reported in the literature. CASE REPORT: A 19-year-old female patient presented with annular lesions on her upper body and limbs, with a sharply defined border and non-atrophic skin in the center. The lesions were hyperpigmented and had been stable for over one year. The histopathology confirmed the diagnosis of annular lichen planus. She had weight loss, occasional diarrhea, and a severe anemia. The investigation of these symptoms led to the diagnosis of Crohn disease and a sickle cell trait. Therapy with systemic corticosteroids and mesalazine controlled the intestinal disease, with concomitant improvement of the skin lesions. CONCLUSIONS: As lichen planus can be associated with other immunological disorders, the association with inflammatory bowel disease should be considered in the evaluation of the patient.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study aims to compare two methods of assessing the postural phase of gait initiation as to intrasession reliability, in healthy and post-stroke subjects. As a secondary aim, this study aims to analyse anticipatory postural adjustments during gait initiation based on the centre of pressure (CoP) displacements in post-stroke participants. The CoP signal was acquired during gait initiation in fifteen post-stroke subjects and twenty-three healthy controls. Postural phase was identified through a baseline-based method and a maximal displacement based method. In both healthy and post-stroke participants higher intra-class correlation coefficient and lower coefficient of variation values were obtained with the baseline-based method when compared to the maximal displacement based method. Post-stroke participants presented decreased CoP displacement backward and toward the first swing limb compared to controls when the baseline-based method was used. With the maximal displacement based method, there were differences between groups only regarding backward CoP displacement. Postural phase duration in medial-lateral direction was also increased in post-stroke participants when using the maximal displacement based method. The findings obtained indicate that the baseline-based method is more reliable detecting the onset of gait initiation in both groups, while the maximal displacement based method presents greater sensitivity for post-stroke participants.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores Mestrado Integrado em Engenharia Electrotécnica e de Computadores