Bacterial contamination of the catfish (Cathorops agassizii - Valenciennes, 1839 and Genidens genidens - Agassiz, 1829) sting

This work aimed to study the bacterial contamination in stings of the catfish Genidens genidens and Cathorops agassizii found in the São Vicente estuarine system (São Paulo State, Brazil). For bacteriological analyses, we used fish samples distributed into a group of 50 specimens (25 C. agassizii and 25 G. genidens) and a group of 14 specimens (7 C. agassizii and 7 G. genidens). Results showed contamination of 13 different bacterial species of Enterobacteriaceae, being Klebsiella pneumoniae the most frequent bacteria (26.80%) followed by Enterobacter sp and Escherichia coli (16.27%), and Serratia marcescens, Serratia sp. and Proteus mirabilis (1.16%). Gram-positive bacteria as well as fungi were not detected in the samples. According to the Gram-negative species characterized and with regard to the environmental conditions, it can also be considered that accidents with these catfish stings may develop significant acute secondary infections in humans.

SEM evaluation of in situ early bacterial colonization on a Y-TZP ceramic: A pilot study

This study aimed to evaluate the effect of surface glazing and polishing of yttrium-stabilized tetragonal zirconia polycrystal ceramic on early dental biofilm formation, as well as the effect of brushing on the removal of adhered bacteria. Two subjects used oral appliances with polished and glazed samples fixed to the right and left sides. After 20 minutes, 1 hour, and 6 hours, the subjects manually brushed the samples on the right side. The samples were analyzed using scanning electron microscopy. Granular material was verified on the samples, especially on irregular surfaces. After 1 hour, there was no significant difference between glazed and polished surfaces in terms of bacterial presence. However, glazed surfaces tended to accumulate more biofilm, and brushing did not completely remove the biofilm. Polished surfaces seem to present a lower tendency for biofilm formation. Int J Prosthodont 2007;20:419-422.

Molecular typing of bacterial strains isolated from the Clinics of Surgery and Face Traumatology at Ribeirão Preto University

The number of infectious illnesses and cross infection is spreading drastically among the professionals of the dentistry area. Controlling infections in dental offices is one of the greatest challenges for dentists and researchers of this area. In practice, contacts between professionals and infected patients are relatively common. The transmission of infectious illnesses from the health professionals to their patients is also possible, either by direct contact or due to lack of cares in relation to biosafety, increasing the cycle of cross infection. Molecular typing is necessary since these methods are an important tool to investigate the epidemiology of bacterial infections. Moreover, they are important for supplying information and precedents through the analysis of the infectious agents eletrophoretic profile. The aim of the present work was to analyze by molecular typing the genomic profile of aerobic bacteria isolated from the Clinics of Surgery and Face Traumatology, Ribeirão Preto University, through the technique of Random Amplified Polymorphic DNA (RAPD) and grouped based on similarity coefficients. Of two carried out collections, 55 strains were isolates belonging to the following groups: 12 Staphylococcus aureus; 13 Klebsiella oxytoca; 7 Klebsiella pneumoniae; 8 Pseudomonas aeruginosa; 5 Hafnia alvei; 5 Proteus vulgaris; 4 Escherichia coli; and 1 Proteus mirabilis. The adopted molecular typing strategy allowed the determination of the persistence of definitive strains at the collection environment, besides the identification of strains proceeding from the hands and gloves of the surgeon dentists, which could have been found in distant places as sinks and reflectors.

SEM analysis of the in situ early bacterial colonization on two novel feldspathic ceramics submitted to different types of glazing

Aim: The aim of this study was to evaluate in situ, the early bacterial colonization on feldspar-ceramics submitted to different glazing. Methods and Materials: Fourteen standardized disc specimens (diameter: 5 mm, thickness: 1.5 mm) of each of two micro-particulate feldspathic ceramics (VM7 and VM13, Vita) were produced according to manufacturers' specifications for a total of 28 specimens (24 for the analysis of biofilm and 4 for topographic analysis analyzing the ceramic surfaces). Specimens from each type of ceramic were submitted to two different glazing methods composing four groups: VM7 glazed using glazing liquid Vita Akzent® 25 (G1) and glaze firing (G2), VM13 glazed using glazing liquid (G3) and glaze firing (G4). Six individuals (n=6) wore oral appliances with four ceramic specimens, fixed on the buccal face of the appliances. After 8 hours, each sample was evaluated for the presence (1) or absence (0) of bacterial colonization under a scanning electron microscope (SEM) on five randomly selected fields. The value for each sample was cumulative of the results observed in the fields. One sample from each group was evaluated under a SEM to verify the topographic pattern. Results: There was no difference with regard to bacterial colonization between the feldspar-ceramics and between the glazing types (Kruskal-Wallis non-parametric test). Conclusion: Feldspar-ceramics submitted to firing or glaze firing with Vita Akzent® 25 present a similar condition for in situ bacterial colonization. The similar topographic pattern of the ceramic surfaces seems to have influenced the bacterial colonization.

Bacterial cellulose from glucanacetobacter xylinus: Preparation, properties and applications

This chapter deals with the cellulose produced by the Glucanacetobacter xylinus strain, called bacterial cellulose, which is a remarkably versatile biomaterial usable in wide variety of domains, such as papermaking, optics, electronics, acoustics, and biomedical devices. Its unique structure shows entangled ultrafine fibers, which provide excellent mechanical strength, besides biodegradability, biocompatibility, high water-holding capacity, and high crystallinity. Some of its applications are described, such as complementary nutrition (. nata de coco), artificial temporary skin for wounds and burns, dental aid, artificial blood vessels and micronerve surgery, DNA separation, composite reinforcement, electronic paper, light emitting diodes, and fuel cell membranes. © 2007 Elsevier Ltd. All rights reserved.

Development and validation of a Xanthomonas axonopodis pv. citri DNA microarray platform (XACarray) generated from the shotgun libraries previously used in the sequencing of this bacterial genome

Background. From shotgun libraries used for the genomic sequencing of the phytopathogenic bacterium Xanthomonas axonopodis pv. citri (XAC), clones that were representative of the largest possible number of coding sequences (CDSs) were selected to create a DNA microarray platform on glass slides (XACarray). The creation of the XACarray allowed for the establishment of a tool that is capable of providing data for the analysis of global genome expression in this organism. Findings. The inserts from the selected clones were amplified by PCR with the universal oligonucleotide primers M13R and M13F. The obtained products were purified and fixed in duplicate on glass slides specific for use in DNA microarrays. The number of spots on the microarray totaled 6,144 and included 768 positive controls and 624 negative controls per slide. Validation of the platform was performed through hybridization of total DNA probes from XAC labeled with different fluorophores, Cy3 and Cy5. In this validation assay, 86% of all PCR products fixed on the glass slides were confirmed to present a hybridization signal greater than twice the standard deviation of the deviation of the global median signal-to-noise ration. Conclusions. Our validation of the XACArray platform using DNA-DNA hybridization revealed that it can be used to evaluate the expression of 2,365 individual CDSs from all major functional categories, which corresponds to 52.7% of the annotated CDSs of the XAC genome. As a proof of concept, we used this platform in a previously work to verify the absence of genomic regions that could not be detected by sequencing in related strains of Xanthomonas. © 2010 Moreira et al; licensee BioMed Central Ltd.

Easiness of use and validity testing of VS-SENSE device for detection of abnormal vaginal flora and bacterial vaginosis

Accessing vaginal pH is fundamental during gynaecological visit for the detection of abnormal vaginal flora (AVF), but use of pH strips may be time-consuming and difficult to interpret. The aim of this study was to evaluate the VS-SENSE test (Common Sense Ltd, Caesarea, Israel) as a tool for the diagnosis of AVF and its correlation with abnormal pH and bacterial vaginosis (BV). The study population consisted of 45 women with vaginal pH ≥ 4.5 and 45 women with normal pH. Vaginal samples were evaluated by VS-SENSE test, microscopy and microbiologic cultures. Comparing with pH strips results, VS-SENSE test specificity was 97.8% and sensitivity of 91%. All severe cases of BV and aerobic vaginitis (AV) were detected by the test. Only one case with normal pH had an unclear result. Concluding, VS-SENSE test is easy to perform, and it correlates with increased pH, AVF, and the severe cases of BV and AV. Copyright © 2010 Gilbert G. G. Donders et al.

Bacterial cellulose-hydroxyapatite nanocomposites for bone regeneration

The aim of this study was to develop and to evaluate the biological properties of bacterial cellulose-hydroxyapatite (BC-HA) nanocomposite membranes for bone regeneration. Nanocomposites were prepared from bacterial cellulose membranes sequentially incubated in solutions of CaCl2 followed by Na2HPO4. BC-HA membranes were evaluated in noncritical bone defects in rat tibiae at 1, 4, and 16 weeks. Thermogravimetric analyses showed that the amount of the mineral phase was 40-50 of the total weight. Spectroscopy, electronic microscopy/energy dispersive X-ray analyses, and X-ray diffraction showed formation of HA crystals on BC nanofibres. Low crystallinity HA crystals presented Ca/P a molar ratio of 1.5 (calcium-deficient HA), similar to physiological bone. Fourier transformed infrared spectroscopy analysis showed bands assigned to phosphate and carbonate ions. In vivo tests showed no inflammatory reaction after 1 week. After 4 weeks, defects were observed to be completely filled in by new bone tissue. The BC-HA membranes were effective for bone regeneration. © 2011 S. Saska et al.

Reduction of bacterial adhesion to biocompatible polymer surfaces via plasma processing

Plasma processing of the surfaces of biomaterials is interesting because it enables modification of the characteristics of a surface without affecting bulk properties. In addition, the results are strongly influenced by the conditions of the treatment. Therefore, by adjusting the plasma parameters it is possible to tailor the surface properties to best fulfill the requirements of a given application. In this work, polyurethane substrates have been subjected to sulfur hexafluoride glow discharge plasmas. The influences of different SF 6 plasma exposure times and pressures on the adhesion of Staphylococcus aureus and Pseudomonas aeruginosa to the polymer have been investigated. The wettability and surface free energy have been evaluated via contact angle measurements. At low pressure (6.7 Pa) the contact angle decreases with increasing exposure time in the 180 s to 540 s interval, but at higher pressure (13.3 Pa) it increases as a function of the same variable. Bacterial adhesion has been quantified from in vitro experiments by determining the growth of colonies on Petri dishes treated with agar nutrient. It has been observed that the surface properties play an important role in microbe adhesion. For instance, the density of adhered P. aeruginosa decreased as the surface contact angle increased. S. aureus preferred to adhere to hydrophobic surfaces. © 2011 by Begell House, Inc.

Preparation and characterization of the bacterial cellulose/polyurethane nanocomposites

New nanocomposites based on bacterial cellulose nanofibers (BCN) and polyurethane (PU) prepolymer were prepared and characterized by SEM, FT-IR, XRD, and TG/DTG analyses. An improvement of the interface reaction between the BCN and the PU prepolymer was obtained by a solvent exchange process. FT-IR results showed the main urethane band at 2,270 cm-1 to PU prepolymer; however, in nanocomposites new bands appear as disubstituted urea at 1,650 and 1,550 cm-1. In addition, the observed decrease in the intensity of the hydroxyl band (3,500 cm-1) suggests an interaction between BCN hydroxyls and NCO-free groups. The nanocomposites presented a non-crystalline character, significant thermal stability (up to 230 °C) and low water absorption when compared to pristine BCN. © 2013 Akadémiai Kiadó, Budapest, Hungary.

Bacterial nanocellulose for medical implants

Bacterial cellulose (BC) has established to be a remarkably versatile biomaterial and can be used in wide variety of applied scientific endeavours, especially for medical devices. In fact, biomedical devices recently have gained a significant amount of attention because of an increased interest in tissue-engineered products for both wound care and the regeneration of damaged or diseased organs. Due to its unique nanostructure and properties, microbial cellulose is a natural candidate for numerous medical and tissue-engineered applications. Hydrophilic bacterial cellulose fibers of an average diameter of 50 nm are produced by the bacterium Acetobacter xylinum, using a fermentation process. The microbial cellulose fiber has a high degree of crystallinity. Using direct nanomechanical measurement, determined that these fibers are very strong and when used in combination with other biocompatible materials, produce nanocomposites particularly suitable for use in human and veterinary medicine. Moreover, the nanostructure and morphological similarities with collagen make BC attractive for cell immobilization and cell support. The architecture of BC materials can be engineered over length scales ranging from nano to macro by controlling the biofabrication process. The chapter describes the fundamentals, purification and morphological investigation of bacterial cellulose. This chapter deals with the modification of microbial cellulose and how to increase the compatibility between cellulosic surfaces and a variety of plastic materials. Furthermore, provides deep knowledge of fascinating current and future applications of bacterial cellulose and their nanocomposites especially in the medical field, materials with properties closely mimic that of biological organs and tissues were described. © Springer-Verlag Berlin Heidelberg 2013.

Do Atopobium vaginae, Megasphaera sp. and Leptotrichia sp. change the local innate immune response and sialidase activity in bacterial vaginosis?

Objectives: To investigate if the participation of Atopobium vaginae, Megasphaera sp. and Leptotrichia sp. in the bacterial community of bacterial vaginosis (BV) is associated with distinct patterns of this condition. Methods: In this cross-sectional controlled study, 205 women with BV and 205 women with normal flora were included. Vaginal rinsing samples were obtained for measuring the levels of pro-inflammatory cytokines and bacterial sialidases. Real-time PCR was used to quantify the BV-associated bacteria and to estimate the total bacterial load using the 16S rRNA. Principal component analysis (PCA) using the measured parameters was performed to compare the BV samples with lower and higher loads of the species of interest. Results: Higher bacterial load (p<0.001), levels of interleukin 1-β (p<0.001) and sialidase activity (p<0.001) were associated with BV. Women with BV and higher relative loads of A vaginae, Megasphaera sp. and Leptotrichia sp. presented increased sialidase activity, but unchanged cytokine levels. PCA analysis did not indicate a different pattern of BV according to the loads of A vaginae, Megasphaera sp. and Leptotrichia sp. Conclusions: Greater participation of A vaginae, Megasphaera sp. and Leptotrichia sp. in vaginal bacterial community did not indicate a less severe form of BV; moreover, it was associated with increased sialidase activity.

Sialidase activity in aerobic vaginitis is equal to levels during bacterial vaginosis

Objective: To evaluate levels of proinflammatory cytokines and sialidase activity in aerobic vaginitis (AV) in relation to normal vaginal flora and bacterial vaginosis (BV). Study design: In this cross-sectional study, a total of 682 consecutive non-pregnant women attending the gynecology service were assessed and 408 women were included. Vaginal rinsing samples were collected from 223 women with microscopic finding of BV (n = 98), aerobic vaginitis (n = 25) and normal flora (n = 100). Samples were tested for interleukin (IL)-1β, IL-6, IL-8, tumor necrosis factor (TNF)-α, and sialidase activity. Results: Compared to women with normal flora, vaginal levels of IL-1β were highly increased in both BV and AV (p < 0.0001). Significantly higher vaginal IL-6 was detected in AV (p < 0.0001) but not in BV, in relation to normal flora. Women with AV also presented increased IL-8 levels (p < 0.001), while those with BV presented levels similar to normal flora. Sialidase was increased in BV and AV compared with the normal group (p < 0.0001) but no difference in sialidase activity was observed between BV and AV. Conclusion: A more intense inflammatory host response occurs for AV than for BV when compared with normal flora. Furthermore, the increased sialidase activity in AV and BV indicates that both abnormal vaginal flora types can be harmful to the maintenance of a healthy vaginal environment. © 2012 Elsevier B.V.

Qualitative analysis of preputial and vaginal bacterial microbiota in owl monkeys (Aotus azarai infulatus) raised in captivity

Background: The aim of this study was to identify the aerobic bacteria of the preputial and vaginal microbiota in owl monkeys that have been raised in captivity and to evaluate the antimicrobial susceptibility of these bacteria by gender and social organization. Methods: Thirty clinically healthy Aotus azarai infulatus were used. A total of 134 samples were collected, 60 from the preputial mucosa and 74 from the vaginal mucosa. An automated system of bacterial identification was used. Results and Conclusions: Staphylococcus intermedius and Proteus mirabilis were the microorganisms that were most frequently identified according to gender and social organization. The antimicrobial susceptibility of the isolated gram-positive bacteria was similar in both sexes. However, the gram-negative strains had some differences. The aerobic bacterial population of the vaginal and preputial microbiota is similar in owl monkeys, and there are no differences in the number and bacterial species according to sex and social organization. © 2012 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

Optically transparent membrane based on bacterial cellulose/ polycaprolactone

Optically transparent membranes from bacterial cellulose (BC)/polycaprolactone (PCL) have been prepared by impregnation of PCL acetone solution into dried BC membranes. UV-Vis measurements showed an increase on transparency in BC/PCL membrane when compared with pristine BC. The good transparency of the BC/PCL can be related to the presence of BC nanofibers associated with deposit of PCL nano-sized spherulites which are smaller than the wavelength of visible light and practically free of light scattering. XRD results show that cellulose type I structure is preserved inside the BC/PCL membrane, while the mechanical properties suggested indicated that PCL acts as a plasticizer for the BC membrane. The novel BC/PCL membrane could be used for preparation of fully biocompatible flexible display and biodegradable food packaging.